Polymer Chemistry Commons^™

Reactive Chemistries For Protein Labeling, Degradation, And Stimuli Responsive Delivery, Myrat Kurbanov

Doctoral Dissertations

Reactive chemistries for protein chemical modification play an instrumental role in chemical biology, proteomics, and therapeutics. Depending on the application, the selectivity of these modifications can range from precise modification of an amino acid sequence by genetic manipulation of protein expression machinery to a stochastic modification of lysine residues on the protein surface. Ligand-Directed (LD) chemistry is one of the few methods for targeted modification of endogenous proteins without genetic engineering. However, current LD strategies are limited by stringent amino acid selectivity. To bridge this gap, this thesis focuses on the development of highly reactive LD Triggerable Michael Acceptors (LD-TMAcs) …

Studying The Stability Of Collagen/Heparin Coatings To Be Used In Cell Therapy Applications, Gavin Mussino

Biological Sciences Undergraduate Honors Theses

This honors thesis aims to investigate the reusability and performance of cell coatings for cell therapy applications. Cell therapy, which involves the use of human cells to repair or replace damaged tissues, holds immense potential for medical advancements. However, ensuring the survival and functionality of transplanted cells remains a significant challenge. We focused on studying the effectiveness of coatings applied to cells for improved cell growth and viability. The research project involved the preparation of the coatings using a layer-by-layer method and the subsequent seeding of cells. The coated cells were then subjected to a series of experiments to assess …

Dual Ionic Liquid-Functionalized Cellulosic Materials: Thermal, Mechanical And Conductive Properties, Elizabeth Mcgrew, Kevin M. Miller Phd

Posters-at-the-Capitol

Cellulose, an inexpensive and renewable biomacromolecule, represents an intriguing synthetic foundation for new materials with task-specific properties. Here, we wish to report a synthetic route for functionalizing cellulose with a side chain containing two ionic liquid functional groups using azide-alkyne ‘click’ cyclization strategy, followed by quaternization of the two resulting heterocycles (1,2,3-triazole and imidazole). Through this functionalization strategy, the resulting cellulosic materials exhibited significant softening, with several glass transition (T_g) values observed below room temperature, indicating the amorphous nature of the materials, with the T_g dependent on both the length of the side chain and the …

The Affect Of Dha Concentration On Lipid Membrane Fluidity, Elise Rezabeck

Williams Honors College, Honors Research Projects

My proposed project will be creating large unilaminar vesicles with varying concentrations of DHA in the vesicles. The diffusion in and out of these vesicles will be tracked by using singular lipid molecules. These singular lipid molecules will be tagged with fluorescence and viewed using an internal reflection fluorescence microscope. The data collected over the course of this project will then be analyzed using Matlab. The result of the project will be to find the specific lipid diffusion constant of these unilaminar vesicles. The relationship between the concentration of DHA and lipid diffusion and membrane fluidity will be found as …

Frontiers In The Self-Assembly Of Charged Macromolecules, Khatcher O. Margossian

Doctoral Dissertations

The self-assembly of charged macromolecules forms the basis of all life on earth. From the synthesis and replication of nucleic acids, to the association of DNA to chromatin, to the targeting of RNA to various cellular compartments, to the astonishingly consistent folding of proteins, all life depends on the physics of the organization and dynamics of charged polymers. In this dissertation, I address several of the newest challenges in the assembly of these types of materials. First, I describe the exciting new physics of the complexation between polyzwitterions and polyelectrolytes. These materials open new questions and possibilities within the context …

Intracellular Delivery Of Therapeutic Biomolecules Through Versatile Polymer Nanotechnology, David C. Luther

Doctoral Dissertations

Advancing pharmaceutical technology has made it possible to treat diseases once considered ‘undruggable.’ Access to these new pharmaceutical targets is possible thanks to the advent of protein and nucleic acid therapeutics. Responses to the COVID-19 pandemic, as well as cutting-edge treatments for cancer and multiple sclerosis have centered on these biologic therapies, promising even greater value in the future. However, their utility is limited at a cellular level by inability to cross the plasma membrane. Nanocarrier technologies encapsulate therapeutics and facilitate uptake into the cell but are often trapped and degraded in endosomes. Arginine-functionalized gold nanoparticles (Arg-NPs) provide efficient, direct …

Conformation Of The U12-U6atac Snrna Complex Of The Minor Spliceosome And Binding By Ntc-Related Protein Rbm22, Joanna Ciavarella

Dissertations, Theses, and Capstone Projects

Splicing of precursor messenger (pre-m)RNA is a critical process in eukaryotes in which the non-coding regions, called introns, are removed and coding regions, or exons, are ligated to form a mature mRNA. This process is catalyzed by the spliceosome, a multi-mega Dalton ribonucleoprotein complex assembled from five small nuclear ribonucleoproteins (snRNP) in the form of small nuclear (sn)RNA-protein complexes (U1, U2, U4, U5 and U6) and >100 proteins. snRNA components catalyze the two transesterification reactions while proteins perform critical roles in assembly and rearrangement. U2 and U6 snRNAs are the only snRNAs directly implicated in catalyzing the splicing of pre-mRNA. …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Biomass Estimation Of Marine Biofilms On Plastic Surfaces, Kian Banihashemi, Fernando Javier Gil

Biological Sciences

Plastics have become a major source of marine pollution, which threatens food safety and quality, human health, and marine ecosystems. Due to the drastic negative effects of plastics in a marine environment, alternative biodegradable plastics are being generated that are more eco-friendly and have less environmental impact. Though some of these plastics are known to biodegrade, the process of degradation for bioplastics has not been heavily studied in a marine environment. This pilot project sought to both quantify the process of biodegradation and compare across different methods for effectiveness of biomass estimation, which serves as an indicator of biodegradation. Plastics …

Analysis Of The Light Responsive Azobenzene Peptide Nucleic Acid Duplexes, Kat Nguyen

Honors College Theses

Peptide nucleic acids (PNAs) are oligonucleotide analogues in which the sugar-phosphate backbone has been replaced by a pseudopeptide skeleton. Since PNAs use the natural nucleobases (Adenine, Thymine, Cytosine, Uracil, and Guanine) found in either DNA and/or RNA, they are able to hybridize according to Watson-Crick base-pairing to form duplexes. PNA is a promising therapeutic agent because they can function as antigene or antisense chemical agents. To further enhance their utility, we aim to incorporate a photoswitchable moiety using azobenzene. Here, we report the results of the synthesis and purification of a photoswitchable 11 mer PNA along with initial characterization efforts.

1st Place Contest Entry: Designing Hollow Nanogels For Drug Delivery Applications, Mo Hijazi

Kevin and Tam Ross Undergraduate Research Prize

This is Mo Hijazi's submission for the 2022 Kevin and Tam Ross Undergraduate Research Prize, which won first place. It contains their essay on using library resources, their bibliography, and a summary of their research project on hollow-core nanogels.

Mo is a second-year student at Chapman University, majoring in Biological Sciences. Their faculty mentor is Dr. Molla Islam.

Application Of Gellan Gum Biopolymer In Biomedical Applications: A Review, Norsyakirah Izzati Hishamuddin, Mohd Hasmizam Razali, Khairul Anuar Mat Amin

Makara Journal of Science

Gellan gum (GG) has gained considerable attention in the food, chemical, and pharmaceutical industries due to its functional characteristics. It has versatile properties, such as water solubility, easy bio-fabrication, good film/hydrogel-formation, biodegradability, and biocompatibility. These properties render GG a promising material in biomedical applications, specifically in the development of wound dressing materials. In this review, the use of GG biopolymer as a wound dressing material was discussed. Various fillers, such as titanium dioxides, clay, drug, and honey, have been incorporated in GG to produce film, hydrogel, or scaffold materials. The effects of filler on the mechanical performance, physical properties, antibacterial …

Synthesis Of Thiol-Acrylate Hydrogels For 3d Cell Culture And Microfluidic Applications, Anowar Hossain Khan

LSU Doctoral Dissertations

Globally cell culture is an $18.98 billion industry as of 2020, with an 11.6 percent annual growth rate. Drug discovery has an estimated worth of $69.8 billion in 2020 and is predicted to grow to $110.4 billion by 2025. Three-dimensional (3D) cell culture of cancer cells is one of the rapidly growing felids since it better recapitulates in vivo conditions compared to two-dimensional (2D) models. However, it is challenging to grow 3D tumor spheroids outside the body, and some of the existing technology can generate these spheroids outside the human body but poorly mimic in vivo tumor models. Therefore, there …

Synthesis Of Rna Nucleotides Under Probable Prebiotic Conditions, Ryan Stimson

Williams Honors College, Honors Research Projects

RNA being composed of multiple covalently linked nucleotides is thought to have been a precursor to life circa 4.3-3.8 billion years ago. Non-enzymatically formed adenosine monophosphate (AMP), more specifically, is a vitally important subtopic of the self-assembly of the first RNA sequence. The goal of this study was to synthesize AMP non-enzymatically under benign conditions that are likely to have existed on early Earth. In this experiment, 3’,5’-cAMP was successfully formed using wet-dry cycles at 80°C paired with the minerals zeolite beta, hydroxyapatite, and aerosil 300 in the presence of adenosine, urea, and pyrophosphate. A nuclear magnetic resonance spectrometer was …

The Role Of Charge On Dna Packaging And Integrity Within Reconstituted Peptide-Dna Assemblies, Ehigbai Oikeh

Theses and Dissertations--Chemistry

In nature, DNA exists primarily in a highly compacted form. The compaction of DNA in vivo is mediated by cationic proteins; histone in somatic nuclei and arginine-rich peptides called protamines in sperm chromatin. The packaging in the sperm nucleus is significantly higher than somatic nuclei resulting in a final volume roughly 1/20^th that of a somatic nucleus. This tight packaging results in a near crystalline packaging of the DNA helices. While the dense packaging of DNA in sperm nuclei is considered essential for both efficient genetic delivery as well as DNA protection against damage by mutagens and oxidative species, …

Tools And Strategies For The Patterning Of Bioactive Molecules And Macromolecules, Daniel J. Valles

Dissertations, Theses, and Capstone Projects

Hypersurface Photolithography (HP) is a printing method for fabricating structures and patterns composed of soft materials bound to solid surfaces and with ~1 micrometer resolution in the x, y, and z dimensions. This platform leverages benign, low intensity light to perform photochemical surface reactions with spatial and temporal control of irradiation, and, as a result, is particularly useful for patterning delicate organic and biological material. In particular, surface- initiated controlled radical polymerizations can be leveraged to create arbitrary polymer and block- copolymer brush patterns. Chapter 1 will review the advances in instrumentation architectures from our group that have made these …

Stimuli Responsive Dye-Containing Peg-Pla Block Copolymer Micelles And Computationally Assisted Design Of A Stapled Peptide Bundle, Tyler L. Odom

MSU Graduate Theses

In this thesis, I report the preparation and characterization of dye-containing PEG-b-PLA block copolymer micelles and the computational design of a novel coiled-coil peptide bundle. The PEG-b-PLA micelles encapsulate hydrophobic molecules into their core and have strong potential as nanocontainers or delivery vesicles. In theory, these internalized molecules can be released upon exposure to mechanical forces that disrupt the micellar structures. This force-responsive nature is one of the inherent properties of micellar systems. However, there is a stark lack of research that utilize this property in applications. Along those lines, I have studied the behavior of …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

Engineering Stimuli-Responsive Polymeric Nanoassemblies: Rational Designs For Intracellular Delivery Of Biologics, Kingshuk Dutta

Doctoral Dissertations

Biologic drugs have gained enormous research attention in recent years as reflected by the development of multiple candidates to the clinical pipelines and an increased percentage of FDA approval. This is reasoned by the fact that biologics have been proven to deliver more predictive and promising benefits for many hard-to-cure diseases by ‘drugging the undruggable’ targets. However, the challenges associated with biologic drug development are multi-fold, viz, poor encapsulation efficacy, systemic instability, low cellular internalization and endosomal escape capability. Thus, it is essential to develop new molecular strategies that can not only address the associated drug delivery challenges, but also …

Pressure Driven Desalination Utilizing Nanomaterials, Fangyou Xie

Master's Theses

Nanomaterials such as graphene oxide and carbon nanotubes, have demonstrated excellent properties for membrane desalination, including decrease of maintenance, increase of flux rate, simple solution casting, and impressive chemical inertness. Here, two projects are studied to investigate nanocarbon based membrane desalination. The first project is to prepare hybrid membranes with amyloid fibrils intercalated with graphene oxide sheets. The addition of protein amyloid fibrils expands the interlayer spacing between graphene oxide nanosheets and introduces additional functional groups in the diffusion pathways, resulting in increase of flux rate and rejection rate for the organic dyes. Amyloid fibrils also provide structural assistance to …

Research And Review Of Polymethyl-Methacrylate Copolymers In The Development Of Enhanced Pharmaceutical Delivery Systems, Jake Dyess

Senior Honors Theses

The following thesis shall primarily explore the current research regarding the implementation of modifiable microscopic and nanoscopic polymer particles as novel pharmaceutical delivery systems. Polymethacrylate-based copolymers, such as Eudragit^TM, are sensitive to alterations in pH levels, becoming increasingly more soluble in response to an increase in pH. The selective solubility and modifiable nature of these polymers allows for greater flexibility of treatment options for patients (Patra et al., 2017). The wide range of functionality of polymethacrylate (PMA) may provide solutions to challenges relating to the current treatment and therapy of certain conditions. Research indicates that PMA based micro- …

A Proposed Mechanism To Induce Multi-Layer Polydiacetylene-Coated Filter Color Response To Bacteria , Timothy Hanks

Chemistry Publications

The purpose of this study was to develop a multi-layer diacetylene (PDA)-coated filter and to verify the proposed color response mechanism of PDA-coated filters to bacteria. Unlike other reports which immobilize PDA lipo- somes on solid support or create monolayer Langmuir films, multi-layer PDA-coated filters were generated by directly evaporating organic solvents. Different from incorporating functional headgroups or inserting phospho- lipids into PDA, we reported that bacterial growth can trigger the color change of PDA sensors without any mod- ification or phospholipid insertion. The mechanism that pH change from bacteria metabolites lead to color change of PDA filter was proposed …

Gravity-Drawing Flexible Silicone Filaments As Fiber Optics And Model Foldamers, Katherine Snell

CMC Senior Theses

Here, we present a method of gravity-drawing polydimethylsiloxane (PDMS) silicone fibers with application as fiber optics and as model foldamers. Beginning as a viscous liquid, PDMS is cured using heat until its measured viscosity reaches 4000 mPa•s. The semi-cured elastomer is then extruded through a tube furnace to produce thin (diameters on the order of hundred micrometers) filaments with scalable lengths. PDMS is biocompatible, gas-permeable, flexible, and hydrophobic. Additionally, the PDMS surface hydrophobicity can be modified via UV exposure, O2 plasma, and corona discharge. We demonstrate the patternibility (i.e patterns of hydrophobicity) of PDMS fibers, adding complexity to potential foldamer …

The Antimicrobial Activity And Cellular Targets Of Plant Derived Aldehydes And Degradable Pro-Antimicrobial Networks In Pseudomonas Aeruginosa, Yetunde Adewunmi

Dissertations

Essential oils (EOs) are plant-derived products that have been long exploited for their antimicrobial activities in medicine, agriculture, and food preservation. EOs represent a promising alternative to conventional antibiotics due to the broad-range antimicrobial activity, low toxicity to human commensal bacteria, and the capacity to kill microorganisms without promoting resistance. Despite the progress in the understanding of the biological activity of EOs, many aspects of their mode of action remain inconclusive. The overarching aim of this work was to address these gaps by studying molecular interactions between antimicrobial plant aldehydes and the opportunistic human pathogen Pseudomonas aeruginosa. We initiated …

Protein Detection And Structural Characterization By Mass Spectrometry Using Supramolecular Assemblies And Small Molecules, Bo Zhao

Doctoral Dissertations

Mass spectrometry (MS) has played an increasingly prominent role in proteomics and structure biology because it shows superior capabilities in identification, quantification and structural characterization of proteins. To realize its full potential in protein analysis, significant progress has been made in developing innovative techniques and reagents that can couple to MS detection. This dissertation demonstrates the use of polymeric supramolecular assemblies for enhanced protein detection in complex biological mixtures by MS. An amphiphilic random co-polymer scaffold is developed to form functional supramolecular assemblies for protein/ peptide enrichment. The influences of charge density and functional group pK_a on host-guest interactions …

Synthesis Of Crosslinkable Poly(Ester Amide)S For Cell Encapsulation And Delivery, Yu Ting (Natalie) Liang

Electronic Thesis and Dissertation Repository

Tissue engineering using adipose-derived stromal cells (ASCs) shows promise for soft tissue regeneration. Biodegradable polymers are potential biomaterials as they support the growth and delivery of cells. Specifically, poly(ester amide)s (PEAs) are a class of biodegradable polymers with tunable structures that have been shown to exhibit low cytotoxicity and support the growth of various cell types. This thesis involved the development of new water soluble amino acid-based PEAs with crosslinkable moieties to enable formation of hydrogel scaffolds for ASC encapsulation. These hydrophilic phenylalanine-based and alanine-based PEAs were synthesized by solution polycondensation and photo-crosslinked into a series of hydrogels with and …

Synthesis Of New Aliphatic Pseudo-Branched Polyester Co-Polymers For Biomedical Applications, Zachary Shaw

Electronic Theses & Dissertations

In this study, a hyperbranched polyester co-polymer was designed using a proprietary monomer and diethylene glycol or triethylene glycol as monomers. The synthesis was carried out using standard melt polymerization technique and catalyzed by p-Tolulenesulfonic acid. The progress of the reaction was monitored with respect to time and negative pressure, with samples being subjected to standard characterization protocols. The resulting polymers were purified using the solvent precipitation method and characterized using various chromatographic and spectroscopic methods including GPC, MALDI-TOF, and NMR. We have observed polymers with a molecular weight of 29,643 kDa and 33,996 kDa, which is ideal to be …

Bio-Inspired Polymers That Bind And Deliver Protein Cargo, Nicholas D. Posey

Doctoral Dissertations

Delivering functional proteins and antibodies into cells can allow researchers to probe the intracellular environment, discover new cellular pathways, and pioneer new therapeutics. However, the entry of exogenous, charged molecules, like proteins, into the cell is usually restricted by the membrane, thereby hindering intracellular delivery. Membrane permeable molecules such as cell penetrating peptides (CPPs) and protein transduction domains (PTDs) can be used to bypass the cell membrane and deliver protein into the cell, but these peptides involve iterative and laborious syntheses and are limited in terms of their chemical diversity. This dissertation work overall focuses on the design and synthesis …