Open Access. Powered by Scholars. Published by Universities.®

Physical Chemistry Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 31 - 60 of 80

Full-Text Articles in Physical Chemistry

An In Situ Fourier Transform Infrared Spectroelectrochemical Study On Alcohols Electrocatalytic Oxidation At Pd Electrode In Acidic Solution, Hai-Ping Huang, Lian-Qin Wang, Pei-Kang Shen Aug 2010

An In Situ Fourier Transform Infrared Spectroelectrochemical Study On Alcohols Electrocatalytic Oxidation At Pd Electrode In Acidic Solution, Hai-Ping Huang, Lian-Qin Wang, Pei-Kang Shen

Journal of Electrochemistry

The methanol and ethylene glycol electrooxidation on palladium electrode in acidic solution has been investigated by cyclic voltammetry and in situ Fourier transform infrared spectroelectrochemistry. It shows that the oxidation of methanol and ethylene glycol at Pd electrode cannot proceed until over 1. 5 V in acidic and neutral media. The overpotential decreases and the peak current density increases with the reduction in pH values. The formation of the oxygen-containing species significantly affects the alcohol oxidation on Pd electrode. The in situ FTIR spectroscopic measurements show that the oxidation products of ethylene glycol on Pd electrode are CO2 and oxalic …


In-Situ Surface Enhanced Raman Scattering Electrochemical Investigation Of 4-Aminoantipyrine On Silver Electrode, Li-Jun Zhang, Wei Song, Ling Chen, Zong-Rang Zhang, Hai-Feng Yang Aug 2010

In-Situ Surface Enhanced Raman Scattering Electrochemical Investigation Of 4-Aminoantipyrine On Silver Electrode, Li-Jun Zhang, Wei Song, Ling Chen, Zong-Rang Zhang, Hai-Feng Yang

Journal of Electrochemistry

In this paper,4-AAP was self-assembled on silver surface to form monolayers. Surface-enhanced Raman Spectroscopy ( SERS) was used to in-situ investigate the adsorption mechanism of the 4-aminoantipyrine( 4-AAP) on silver surface dependent on shifting potentials and the effect of solution pH. Based on density functional theory( DFT) calculation of vibration modes,approximate assignment of 4-AAP SERS spectrum was conducted. In situ SERS spectral electrochemical experiments indicated that the 4-AAP monolayers experience a dynamic adsorption process from a tilted fashion to a more vertical mode for benzene ring and more parallel for pyrine ring with the potential applied toward more negative voltages. …


Electrochemical Sers Studies On The Adsorption Of Benzoimidazole And Derivative In Nonaqueous Solution, Ya-Xian Yuan, Feng-Zhu Yang, Wei Liu, Ping-Jie Wei, Jian-Lin Yao, Ren-Ao Gu Aug 2010

Electrochemical Sers Studies On The Adsorption Of Benzoimidazole And Derivative In Nonaqueous Solution, Ya-Xian Yuan, Feng-Zhu Yang, Wei Liu, Ping-Jie Wei, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

The surface adsorption of benzoimidazole (BIMH) and 2-mercaptobenzimidazole( MBI) was investigated by electrochemical in-situ surface enhanced Raman spectroscopy (SERS) and direct electrochemical synthesis on Cu electrode. The influence of the neutral ligand of triphenylphosphine (pph3) on the adsorption and surface coordination of BIMH and MBI were investigated respectively. BIMH interacted with metal surface by the neutral molecule to form chemical adlayer in the extremely negative potential,while it adsorbed onto metal surface through the N atoms to form a polymer film which may suppress the corrosion of the metal. The introduction of pph3 destroyed the film formation of BIMH on Cu …


Studies Of Oxidation Processes Of Adsorbed And Solution Co On Pt(110) Electrode By Cyclic Voltammetry And In Situ Ftirs, Li Tian, Jun-Tao Li, Jin-Yu Ye, Chun-Hua Zhen, Shi-Gang Sun Aug 2010

Studies Of Oxidation Processes Of Adsorbed And Solution Co On Pt(110) Electrode By Cyclic Voltammetry And In Situ Ftirs, Li Tian, Jun-Tao Li, Jin-Yu Ye, Chun-Hua Zhen, Shi-Gang Sun

Journal of Electrochemistry

The oxidation processes of adsorbed CO (COad) and solution phase CO (COsol) on Pt(110) electrode were investigated by cyclic voltammetry and in-situ FTIR spectroscopy. It has revealed that in comparison with COad on Pt(110) in a CO-free solution,the oxidation current peak of COsol in a CO-saturated solution is positively shifted ca. 168 mV,and the peak current density has been increased by 6. 70 times. Linear adsorbed CO (COL) is determined by in-situ FTIR spectroscopy as the main species,which is uniformly distributed on Pt (110) surface. In a CO-free solution,the onset potential of COL is measured by in-situ FTIRS ca. 0. …


Electrochemical Surface-Enhanced Raman Spectroscopy—Current Status And Perspective, Bin Ren, Jian-Feng Li, Yi-Fan Huang, Zhi-Cong Zeng, Zhong-Qun Tian Aug 2010

Electrochemical Surface-Enhanced Raman Spectroscopy—Current Status And Perspective, Bin Ren, Jian-Feng Li, Yi-Fan Huang, Zhi-Cong Zeng, Zhong-Qun Tian

Journal of Electrochemistry

Electrochemical interface is a very important interface closely related to various energy and life processes. Surface-enhanced Raman scattering was widely used in electrochemistry soon after its discovery to understand the surface bonding,configuration,and orientation of the surface species. In recent 10 years,the fast development of nanoscience and nanotechnology has offered SERS with abundant substrates and characterization methods,which has allowed impressive development of electrochemical SERS. This articles will follow the time line to make systematically overview of SERS on Au and Ag,thin-layer transition-metal SERS,pure transition metal SERS,core-shell SERS and those methods for studying single crystal surfaces,including gap-mode SERS, TERS and SHINERS. Emphasis …


Preparation And Application Of Ti/Ceo_2-F-Pbo_2 Electrode In Electrochemical Degradation Of Organics, Xun-Hua Wang, Tie-Ming Zhang, Shao-Ping Tong, Chun-An Ma May 2010

Preparation And Application Of Ti/Ceo_2-F-Pbo_2 Electrode In Electrochemical Degradation Of Organics, Xun-Hua Wang, Tie-Ming Zhang, Shao-Ping Tong, Chun-An Ma

Journal of Electrochemistry

The CeO2-modified PbO2 on Ti plate ( Ti/CeO2-F-PbO2) was prepared by electrodeposition. The SEM and XRD analyses indicated that the CeO2 particle could be beuniformly co-deposited in the film of PbO2. The results of electrochemical test showed that the Ti/CeO2-F-PbO2 anode had higher potential ( 1. 83 V. vs. SCE) for oxygen evolution ( OE) than the Ti/F-PbO2 anode ( 1. 78 V,vs. SCE) . The degradation of 4-chlorophenol was carried out to test electrocatalytic performance of this novel electrode,which indicated that Ti/CeO2-F-PbO2 anode had high COD removal rate and instantaneous current efficiencies ( ICE) .


Electrochemical Behaviors Of Hydrazine In Bmimpf_6 Solution At Ag Electrode, Jie Sun, Yan Li, Yi-Ling Feng, Rong Wang, Xia-Qin Wu May 2010

Electrochemical Behaviors Of Hydrazine In Bmimpf_6 Solution At Ag Electrode, Jie Sun, Yan Li, Yi-Ling Feng, Rong Wang, Xia-Qin Wu

Journal of Electrochemistry

In this work,the electrochemical behaviors of hydrazine at Ag electrode in the room temperature ionic liquid,BmimPF6,were studied by cyclic voltammetry. Results suggested that Ag electrode showed a good catalytic activity towards hydrazine oxidation. The catalytic peak current showed a good linear relationship with the hydrazine concentration in the range of 0 ~ 3. 4 mmol/L. The rate-determining step of the electrocatalytic reaction involved one electron transfer form hydrazine molecule to Ag + ion.


Optimization Of Membrane Electrode Assembly In Air-Breathing Direct Methanol Fuel Cell, Liang Ma, Wei-Wei Cai, Jing Zhang, Liang Liang, Jian-Hui Liao, Chang-Peng Liu, Wei Xing May 2010

Optimization Of Membrane Electrode Assembly In Air-Breathing Direct Methanol Fuel Cell, Liang Ma, Wei-Wei Cai, Jing Zhang, Liang Liang, Jian-Hui Liao, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The structure and performance of MEA were optimized by tailoring the catalyst layer,cathodic microporous layer ( MPL) ,anodic MPL and membrane,with the considerations of unique characteristics of airbreathing direct methanol fuel cell ( DMFC) such as methanol crossover and cathode flooding. It was found that high catalyst loading could suppress the methanol crossover effectively,but too high catalyst loading can lead to high mass transport resistance. Hydrophobic anodic MPL with 30% ( by mass) PTFE could facilitate the CO2 bubble detachment,which decreased the methanol concentration gradient and suppressed the methanol crossover accordingly. When Nafion 115 was used as membrane,methanol crossover was …


Nano/Micro-Structured Electrode Materials For Lithium-Ion Batteries, Yu-Guo Guo, Zhong-Li Wang, Xing-Long Wu, Wei-Ming Zhang, Li-Jun Wan May 2010

Nano/Micro-Structured Electrode Materials For Lithium-Ion Batteries, Yu-Guo Guo, Zhong-Li Wang, Xing-Long Wu, Wei-Ming Zhang, Li-Jun Wan

Journal of Electrochemistry

Nanostructured materials are currently of interest as high performance anodes and cathodes for rechargeable lithium-ion batteries because of their novel nano-size effects and significantly enhanced kinetics. This review paper describes some recent developments in this field,addressing the size effects,morphology effects,as well as the functions of carbon coating layers toward lithium storage. Several"kinetically stabilized"nano/microstructured electrode materials and high-rate electrode materials with mixed-conducting networks based on the work of the authors are highlighted for illustration.


Electrocatalytic Oxidation Of Hcooh At Au_(Core)-Pd_(Shell)-Pt_(Cluster) Nanocubes, Qing-Ning Jiang, Huan Li, Ning Yang, Ping-Ping Fang, Feng-Ru Fan, Zhong-Qun Tian May 2010

Electrocatalytic Oxidation Of Hcooh At Au_(Core)-Pd_(Shell)-Pt_(Cluster) Nanocubes, Qing-Ning Jiang, Huan Li, Ning Yang, Ping-Ping Fang, Feng-Ru Fan, Zhong-Qun Tian

Journal of Electrochemistry

Gold nanocubes were synthesized by a two-step seed-mediated growth method. The Aucore-Pdshell and Aucore-Pdshell-Ptcluster nanocubes with controllable shell thickness of Pd and cluster coverage of Pt were synthesized by simply changing the amount ratio of H2PdCl4 or H2PtCl6. The samples were characterized by scanning electron microscope ( SEM) 、transmission electron microscopc ( TEM) and cyclic voltammetry ( CV) . CV was then used to make a systematic study on the dependence of the electrocatalytic properties on the shell thickness of Aucore-Pdshell and Pt coverage of Aucore-Pdshell-Ptcluster,respectively. The results indicated that the Au nanocube core coated by three atomic layers of …


Measurement And Wavelet Analysis Of The Electrochemical Noise Of Rebar Steel In Simulated Concrete Pore Solution, Rong-Gang Hu, Chen-Qing Ye, Shi-Gang Dong, Chang-Jian Lin May 2010

Measurement And Wavelet Analysis Of The Electrochemical Noise Of Rebar Steel In Simulated Concrete Pore Solution, Rong-Gang Hu, Chen-Qing Ye, Shi-Gang Dong, Chang-Jian Lin

Journal of Electrochemistry

Electrochemical noise ( ECN) measurement can provide information about both corrosion rate and corrosion type while inflicting no perturbation on the studied system. The ECN data of steel rebar in SPS with different amount of Cl-were collected and treated by discrete wavelet transformation to evaluate the contribution from transients in different frequency in the overall signals. Energy distribution plot( EDP) indicated in SPS with 0. 0001 mol/L NaCl,the transients with time constant between 16 ~ 32 s were found to be predominant over other processes; while in SPS with higher Cl-concentration,the trend toward active corrosion became the main process. It …


High-Rate Cyclic Properties Of Hollow Carbon Hemisphere As Anode Materials For Lithium Ion Batteries, Guang-Hui Zhang, Zao-Xue Yan, Hong-Li Zou, Pei-Kang Shen May 2010

High-Rate Cyclic Properties Of Hollow Carbon Hemisphere As Anode Materials For Lithium Ion Batteries, Guang-Hui Zhang, Zao-Xue Yan, Hong-Li Zou, Pei-Kang Shen

Journal of Electrochemistry

High surface area hollow carbon hemispheres ( HCHs) covered with hard carbon layers have been synthesized by using polystyrene spheres ( PSs) as templates under hydrothermal method combined with the intermittent microwave heating ( IMH) method. The morphologies of the materials are characterized by SEM and TEM. The electrochemical properties of the HCHs are tested. Comparing with graphite and mesocarbon microbeads ( MCMB) ,the HCHs show higher capacity and excellent cyclic life performance.


Research On Electrochemical Performance Of Lithium-Ion Battery Cathode Material Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 In Aqueous Lino_3 Solution, Jun Zheng, Xin Jia, Chong Wang, Ming-Sen Zheng, Quan-Feng Dong May 2010

Research On Electrochemical Performance Of Lithium-Ion Battery Cathode Material Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 In Aqueous Lino_3 Solution, Jun Zheng, Xin Jia, Chong Wang, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The cathode material of LiNi1/3Co1/3Mn1/3O2 synthesized by sol-gel method shows excellent high rate performance,and high output power density during discharge process. A well-ordered layered α-NaFeO2 structure was confirmed by XRD and a primary particle size of about 500 nm was indicated by SEM. Galvanostatic charge-discharge test indicates that LiNi1/3Co1/3Mn1/3O2 in 2 mol·L-1 LiNO3 aqueous solution with pH 12 reached a ca-pacity of 147 mAh/g while charged and discharged at 2C. The capacities were 64、33、16 mAh/g with 80C ( 14. 4 A/g) 、150C( 27 A/g) and 220C ( 39. 6 A/g) charge/discharge rates,while the power densities of the battery were 2574 …


Fabrication Of Electrochemically Activated Glassy Carbon/Bismuth Film Electrodes For Sensitive Analysis Of Pb~(2+) And Cd~(2+), Kang Shi, Wen-Jing Wang, Kun Hu May 2010

Fabrication Of Electrochemically Activated Glassy Carbon/Bismuth Film Electrodes For Sensitive Analysis Of Pb~(2+) And Cd~(2+), Kang Shi, Wen-Jing Wang, Kun Hu

Journal of Electrochemistry

The application of electrochemically activated glassy carbon ( GC) in the in-situ preparing of bismuth film electrodes ( BiFEs) to analyze Pb2 + and Cd2 + was investigated. The glassy carbon electrodes were electrochemically activated by either potentiostic or cyclic polarization in 1 mol·L-1 NaOH solution. Experimental results show that employment of HCl solution as the analytical solution not only can reproducibly renew the electrochemically activated GC electrode surface with an electrochemical clear procedure,but also can greatly enhance the sensitivity of BiFes method for analysis of Pb2 + and Cd2 + . The test range thus was extended to the …


Synthesis Of Cosalen Composite In Apo-5 And Its Electrocatalytic Behaviour For Reaction Of Dioxygen Reduction, Rong Zhang, Li-Hua Tang, Bin-Bin Fan, Jing-Hong Ma, Rui-Feng Li May 2010

Synthesis Of Cosalen Composite In Apo-5 And Its Electrocatalytic Behaviour For Reaction Of Dioxygen Reduction, Rong Zhang, Li-Hua Tang, Bin-Bin Fan, Jing-Hong Ma, Rui-Feng Li

Journal of Electrochemistry

CoAPO-5 molecular sieve was hydrothermally synthesized. The Cobalt ions in CoAPO-5 were coordinated with the SALEN ligend diffusing into the channels of the molecular sieve to form CoSALEN complexes. The electrochemical behaviors and electrocatalysis for dioxygen reduction of the CoSALEN complex immobilized in APO-5 modified glassy carbon electrodes ( GCEs) have been investigated by cyclic voltammetry( CV) and chronoamperometry ( CA) in differrent pH aqueous solutions. The results showed that the PS/CoSALEN/APO-5 /GC modified electrode is of the high electrocatalytic activity towards dioxygen reduction in pH 6. 86 buffer solution with a reduced overpotential of 447 mV lower than bare …


Failure Reaction Mechanism Of Internal Short-Circuit For Lithium-Ion Batteries, He Li, Shen-Jun Yu, Zhi-Kui Chen, Guang-Chuan Liang May 2010

Failure Reaction Mechanism Of Internal Short-Circuit For Lithium-Ion Batteries, He Li, Shen-Jun Yu, Zhi-Kui Chen, Guang-Chuan Liang

Journal of Electrochemistry

In this work,the battery impact testing machine has been used to study the failure progress of internal short-circuit ( ISC) for lithium ion batteries. The reaction mechanisms between cathode/anode and electrolyte in the battery at different temperatures were characterized by differential scanning calorimetry ( DSC) ,gas chromatography/mass spectrometry ( GC/MS) and X-ray diffraction ( XRD) . The experimental results show that the ISC failure of the battery was mainly due to the reaction between cathode Li0.5CoO2 and electrolyte. The decomposition and oxygen evolution reactions of cathode occurred when the temperature reached a certain value. At the same time a fierce …


Hydrogen Evolution Reaction Activtity Of Ni-Ru-Ir Oxide Cathode Coating, Yin-Hui Fu, Xue-Ming Li, Wu-Lin Li, Jun Zhang May 2010

Hydrogen Evolution Reaction Activtity Of Ni-Ru-Ir Oxide Cathode Coating, Yin-Hui Fu, Xue-Ming Li, Wu-Lin Li, Jun Zhang

Journal of Electrochemistry

The Ni-Ru-Ir electrode coating was fabricated by thermal decomposition and oxidation. Electrochemical properties of Ni-Ru-Ir electrode coating and pure nickel cathode in the 30% NaOH solutions at 90 ℃( conditions of the industrial electrolysis) ,have been investigated by cyclic voltammetry,Tafel curves and chronoamperometry. The results show that the Ni-Ru-Ir oxide electrode coating exhibited high catalytic activity. At the current density of 0. 3 A·cm-2,the lowest hydrogen evolution overpotential of Ni-Ru-Ir oxide electrode coating was about 300 mV lower than Ni. The roughness and excharge current density of Ni-Ru-Ir electrode coating were 32 and 4 times,respectively,larger than those of pure nickel …


Prerapation And Supercapacitor Property Of Mesoporous Carbon Nanofibers, Yong-Wen Wang, Ming-Bo Zheng, Jian Cao, Jie-Ming Cao, Guang-Bin Ji, Jie Tao May 2010

Prerapation And Supercapacitor Property Of Mesoporous Carbon Nanofibers, Yong-Wen Wang, Ming-Bo Zheng, Jian Cao, Jie-Ming Cao, Guang-Bin Ji, Jie Tao

Journal of Electrochemistry

Two different mesoporous carbon nanofibers with large mesopore or core-shell structure were prepared by using the resol/F127 mixture to fill the AAO template. The morphology and structural parameters of the samples were characterized by SEM,TEM,and N2 adsorption-desorption analysis. The supercapacitive behaviors of the electrodes were tested by cyclic voltammetry and galvanostatic charge-discharge. The results show that the specific capacitances of mesoporous carbon nanofibers increased obviously and the fine supercapacitive performances were achieved at high scan rate or large current density.


Synthesis And Electrochemical Properties Of Li_3v_2(Po_4)_3/C Cathode Materials For Lithium Ion Battery, Li-Ying Liu, Hai-Yan Zhang, Lian Chen, Yu-Chun Zhai May 2010

Synthesis And Electrochemical Properties Of Li_3v_2(Po_4)_3/C Cathode Materials For Lithium Ion Battery, Li-Ying Liu, Hai-Yan Zhang, Lian Chen, Yu-Chun Zhai

Journal of Electrochemistry

Cathode material Li3V2( PO4) 3 /C for Lithium-ion battery was synthesized by combination of ball milling and baking. Physical and electrochemical performances of as-prepared materials were characterized through XRD,EIS and galvanostatic cell cycling. The results show that the products were monoclinic Li3 V2 ( PO4) 3 with well-developed crystal structure. At 0. 1C,0. 25C and 0. 5C,the initial discharge capacities were 150. 6,134. 1 and 107. 1 mAh·g-1 ,respectively. Capacity retention rates were 87. 3% after 130 cycles at 0. 25C and 87. 2% after 105 cycles at 0. 5C. Charge-discharge efficiencies were all above 80% and the average discharge …


Preparation And Electrochemical Performance Of Three-Dimensional Porous Snco Alloy Electrode, Lian-Jie Xue, Ling Huang, Fu-Sheng Ke, Guo-Zhen Wei, Xiao-Mei Zheng, Jun-Tao Li, Xiao-Yong Fan, Shi-Gang Sun May 2010

Preparation And Electrochemical Performance Of Three-Dimensional Porous Snco Alloy Electrode, Lian-Jie Xue, Ling Huang, Fu-Sheng Ke, Guo-Zhen Wei, Xiao-Mei Zheng, Jun-Tao Li, Xiao-Yong Fan, Shi-Gang Sun

Journal of Electrochemistry

Three-dimensional porous Cu film was prepared by electroless plating,and used as a current collector for preparation of three-dimensional structured SnCo alloy electrode,which was mainly prepared by an electrodeposition method,and composed of pure Sn and CoSn2 phases. Electrochemical experimental results show that three-dimensional structured SnCo alloy electrode exhibits much better cycleability than planar SnCo alloy electrode,with first discharge capacity and charge capacity of 636. 3 and 528. 7 mAh·g-1,respectively. After 70th cycling,capacity retention is 83. 1% with 529. 5 mAh·g-1. The lithiation process during first discharge was investigated by electrochemical impedance spectroscopy


A High Performance Sulfur/Carbon Xerogel Composite In Lithium Sulfur Battery Application, Chong Wang, Jia-Jia Chen, Qiu-Jie She, Qian Zhang, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong May 2010

A High Performance Sulfur/Carbon Xerogel Composite In Lithium Sulfur Battery Application, Chong Wang, Jia-Jia Chen, Qiu-Jie She, Qian Zhang, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

Sulfur/carbon composite was synthesized by the thermal method with the carbon xerogel as the conductive framework. The property of composite was characterd by XRD and SEM. It shown that the composite with the particle size below 10 μm had the same morphology as the carbon xerogel and the sulfur was absorbed in the pores in non-crystalline. The discharge capacity of the composites were 1311 mAh/g and 1107. 1 mAh/g at 0. 1C and 0. 2 C rates,respetively. And a retention capacity was about 800 mAh/g after 30 cylcyes.


Influence Of Ions Dimension On The Electric Field Activation Of Micro-Crystallite Carbon, Gang-Wei Sun, Wen-Hua Song, Guo Cheng, Wen-Ming Qiao, Li-Cheng Ling May 2010

Influence Of Ions Dimension On The Electric Field Activation Of Micro-Crystallite Carbon, Gang-Wei Sun, Wen-Hua Song, Guo Cheng, Wen-Ming Qiao, Li-Cheng Ling

Journal of Electrochemistry

Micro-crystallite carbon ( CC) was synthesized by KOH activation of carbonized petroleum coke precursors. The porous properties structure and crystallite structure were characterized by N2 adsorption-desorption, X-ray diffraction ( XRD) measurements. The capacitive behavior of CC was investigated in the electrolyte of Et4NBF4 /PC,Et4NBF4 /AN,Bu4NBF4 /PC and Bu4NBF4 /AN,respectively. Results showed that the lower potential of electric field activation ( EFA) was obtained in the solvent of AN than in PC,which was ascribed to the fact that smaller solvated ions dimension in AN facilitating the intercalation of the solvated ions into micro-crystallite interlayer. The extent of EFA was more remarkable …


Study On Electrocatalytic Properties For Oxygen Evolution Of Ti/Iro_2-Ta_2o_5 Anodes With Different Ir Contents, Yong-Lei Xin, Li-Kun Xu, Jun-Tao Wang May 2010

Study On Electrocatalytic Properties For Oxygen Evolution Of Ti/Iro_2-Ta_2o_5 Anodes With Different Ir Contents, Yong-Lei Xin, Li-Kun Xu, Jun-Tao Wang

Journal of Electrochemistry

The anodes of Ti/IrO2-Ta2O5 were prepared by Pechini method. The effects of coating loading on the surface morphology and electrochemical properties of the anodes were characterized by scanning electron microscope ( SEM) ,energy dispersive X-ray detector ( EDX) ,potentiodynamic polarization,cyclic voltammetry and accelerated life test. The results indicate that with the increase of the coating loading,the oxide anode presents evident IrO2 crystallite segregation,and cracks become narrow and shallow. Moreover,it has larger electrochemically active surface area,better electrocatalytic activity for oxygen evolution and higher stability. It was observed that for an iridium content of 1. 98 ~ 9. 08 g/m2 the service …


Nano-Sized Au On Nickel Foam As Cathode Of Alkaline Al-H_2o_2 Semi Fuel Cell, Shu-Li Chen, Bang-An Lu, Yao Liu, Gui-Ling Wang, Dian-Xue Cao May 2010

Nano-Sized Au On Nickel Foam As Cathode Of Alkaline Al-H_2o_2 Semi Fuel Cell, Shu-Li Chen, Bang-An Lu, Yao Liu, Gui-Ling Wang, Dian-Xue Cao

Journal of Electrochemistry

Nano-sized Au particles were deposited on a nickel foam substrate by a fast spontaneous deposition method using AuCl3 as the source of Au. The effects of AuCl3 concentration and deposition time on the size and distribution of Au particles,and the performance of the obtained Au/Ni electrode as the cathode of Al-H2O2 semi fuel cell were investigated. It was found that after the nickel foam was immersed in a 2 mmol·L-1 AuCl3 solution for 60 s,Au particles with diameters smaller than 100 nm were deposited on its surfaces and cover the surface completely. The Al-H2O2 semi fuel cell with Au/Ni cathode …


Blocking Method In Enzyme-Amplified Amperometric Dna Biosensor, Miao He, Wei Chen, Xiong-Wei Xu, Ai-Lin Liu, Xin-Hua Lin May 2010

Blocking Method In Enzyme-Amplified Amperometric Dna Biosensor, Miao He, Wei Chen, Xiong-Wei Xu, Ai-Lin Liu, Xin-Hua Lin

Journal of Electrochemistry

Non-specific absorption of enzyme and nucleotide is a main source leading to the background staining in enzyme-amplified amperometric detection of DNA. To eliminate the background staining in this system, the blocking procedure by mercapto-hexanol ( MCH) and bovine serum albumin ( BSA) was studied systematically. The results show that the anti-fouling effect of BSA is better than that of MCH. A simple and efficient blocking strategy employing BSA as the sole blocking reagent was established and applied in the detection of PMLRARα fusion gene in acute promyelocytic leukemia. It can effectively eliminate the background staining,shorten the pre-processing time,and achieve strong …


Electrochemical Behavior Of Kaempferide Interaction With Protein, Li-Qing Lin, Xin-Hua Lin, Jing-Hua Chen, Li-Ying Huang, Yin-Huan Liu, Guang-Wen Li May 2010

Electrochemical Behavior Of Kaempferide Interaction With Protein, Li-Qing Lin, Xin-Hua Lin, Jing-Hua Chen, Li-Ying Huang, Yin-Huan Liu, Guang-Wen Li

Journal of Electrochemistry

The electrochemical behavior of kaempferide at activated GCE and the interaction of kaempferide with human serum albumin( HSA) were investigated by cyclic voltammetry. A differential pulse voltammetric method has been proposed for the determination of the HSA with kaempferide. In pH 4. 5 phosphate buffer solutions ( PBS) kaempferide can react with HSA to form an electrochemically non-active supermolecular complex at activated GCE,resulting in the decrease of oxidation peak ( at 0. 468 V) without the change of peak potential. The decrease of the peak current is proportional to HSA concentration in the range of 0. 05 ~ 0. 25 …


Effects Of Different Carbon Sources On Performance Of Li_3v_2(Po_4)_3/C Composite Cathode Materials, Kai-Yuan Liu, Jian-Shu Huang, Li Yang Feb 2010

Effects Of Different Carbon Sources On Performance Of Li_3v_2(Po_4)_3/C Composite Cathode Materials, Kai-Yuan Liu, Jian-Shu Huang, Li Yang

Journal of Electrochemistry

The monoclinic Li3V2(PO4)3 cathode materials were prepared by carbothermal reduction method,with methyl cellulose,chitosan(crab shells) or glucose anhydrous as carbon sources,respectively.The crystal structures,morphologies and the electrochemical performances were characterized by XRD,SEM and electrochemical measurement.The XRD patterns show that the samples obtained at 800 ℃ for 6 h have a pure monoclinic structure,which indicates that the carbon exists in amorphous phase.Electrochemical measurements show that the difference of carbon sources has a significant influence on the electrochemical properties of the materials.The Li3V2(PO4)3 /C with methyl cellulose as the reduction agent has the best electrochemical performance.In the voltage range of 3.0 ~ 4.5 V …


Study Of Electrodes Modified With Hybrid Copper Cobalt Hexacyanoferrate-Mwcnts Composites, Shan Jiang, Yun Zhang, Xiao-Yan Wang, Xiao-Fei Yao Feb 2010

Study Of Electrodes Modified With Hybrid Copper Cobalt Hexacyanoferrate-Mwcnts Composites, Shan Jiang, Yun Zhang, Xiao-Yan Wang, Xiao-Fei Yao

Journal of Electrochemistry

The hybrid modified electrodes were obtained by electrochemical deposition of copper-cobalt hexacyanoferrate(CuCoHCF) /multi-walled carbon nanotubes(MWCNTs) on the surface of glassy carbon electrode.The effects of the amount of MWCNTs and composition of electrolyte on the properties of modified electrode had been researched.The copper cobalt hexacyanoferrate-MWCNTs modified electrodes show excellent electrochemical properties compared with that modified only copper-cobalt hexacyanoferrate.The CuCoHCF-MWCNTs/GCE exhibits obvious electrocatalytic activity towards oxidation of hydrogen peroxide.The oxidation peak current increased linearly with the concentration of hydrogen peroxide in the range of 3.16 × 10-5 ~ 2.92 × 10-3 mol· L-1.The linear equation is given up ip(μA) = 0.5529 + …


Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Lscm-Ceo_2 Catalyst Layer In Thin Film Sofc, Yun-Yun Wang, Bo Huang, Xin-Jian Zhu, Wan-Qi Hu, Qing-Chun Yu Feb 2010

Fabrication And Characterization Of The Ni-Scsz Composite Anodes With A Lscm-Ceo_2 Catalyst Layer In Thin Film Sofc, Yun-Yun Wang, Bo Huang, Xin-Jian Zhu, Wan-Qi Hu, Qing-Chun Yu

Journal of Electrochemistry

Solid oxide full cell(SOFC) running directly on hydrocarbon fuels has attracted much attention in recent years.In this paper,a dual-layer structure anode was fabricated by tape casting and screen printing method.The addition of a LSCM-CeO2 catalyst layer to the supported anode surface yielded better performance in ethanol fuel.The maximum power density reached 710 and 669 mW/cm2 at 850 ℃ running on hydrogen gas steam and ethanol steam,respectively.No significant degradation in performance has been observed after 216 h of cell testing when the Ni-ScSZ13 anode was exposed to the ethanol steam at 700 ℃.Very little carbon was detected on the anode,suggesting that …


Performance Of Sulfur-Super Conductive Carbon Black Composite In Electrolyte Mixed With Room Temperature Ionic Liquid, Bo Zhang, Si-Ting Chen, Xue-Ping Gao Feb 2010

Performance Of Sulfur-Super Conductive Carbon Black Composite In Electrolyte Mixed With Room Temperature Ionic Liquid, Bo Zhang, Si-Ting Chen, Xue-Ping Gao

Journal of Electrochemistry

The sulfur-super conductive carbon black composite was prepared as cathode material of lithium/sulfur battery.The composite was characterized by scanning electron microscopy(SEM),X-ray diffraction(XRD),and electrochemical impedance spectroscopy(EIS).The sulfur composite shows a high discharge capacity and a good cycle performance in electrolyte mixed with 50% of room temperature ionic liquid.In particular,the discharge capacity of the composite was stabilized at 483.6 mAh/g after 50 cycles.