Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Institution
- Keyword
-
- Lithium ion battery (6)
- Cathode material (5)
- Electrocatalysis (5)
- Electrochemistry (4)
- Li-ion batteries (4)
-
- Corrosion (3)
- Cyclic voltammetry (3)
- Electrochemical impedance spectroscopy (3)
- Electrodeposition (3)
- Ionic liquid (3)
- Adsorption (2)
- Cathode materials (2)
- Concrete (2)
- Corrosion resistance (2)
- Electrochemical behavior (2)
- Electrochemical noise (2)
- Electrochemical properties (2)
- Li3V2(PO4)3 (2)
- LiNi1/3Co1/3Mn1/3O2 (2)
- Lithium sulfur battery (2)
- Mesoporous carbon (2)
- PbO2 (2)
- Pd (2)
- Pt electrodes (2)
- Raman spectroscopy (2)
- SERS (2)
- Sol-gel (2)
- Supercapacitor (2)
- 12 (1)
- 13 COad/12 CO isotope exchange (1)
Articles 31 - 60 of 80
Full-Text Articles in Physical Chemistry
Solid State Nmr Studies Of Lithium Manganese Silicate As Positive Electrode Materials For Li-Ion Batteries, Hu Cheng, Zi-Geng Liu, Yi-Xiao Li, Zhong Chen, Yong Yang
Solid State Nmr Studies Of Lithium Manganese Silicate As Positive Electrode Materials For Li-Ion Batteries, Hu Cheng, Zi-Geng Liu, Yi-Xiao Li, Zhong Chen, Yong Yang
Journal of Electrochemistry
The Li2MnSiO4 cathode material for lithium ion batteries was synthesized by sol-gel assisted hydrothermal method. XRD,FTIR and SS-NMR were used to study the phase,structure and morphology of obtained samples. Electrochemical performance of cathode material was tested. The results show that the main phase of sample prepared was Li2MnSiO4,whereas a small amount of impurities ( Li2CO3) were existed. The Li2MnSiO4 cathode material gave an initial discharging capacity of about 190 mAh·g -1. But this capacity faded rapidly during the cycling process due to the decomposition of Li2MnSiO4.
Electrochemical Sers Studies On The Adsorption Of Benzoimidazole And Derivative In Nonaqueous Solution, Ya-Xian Yuan, Feng-Zhu Yang, Wei Liu, Ping-Jie Wei, Jian-Lin Yao, Ren-Ao Gu
Electrochemical Sers Studies On The Adsorption Of Benzoimidazole And Derivative In Nonaqueous Solution, Ya-Xian Yuan, Feng-Zhu Yang, Wei Liu, Ping-Jie Wei, Jian-Lin Yao, Ren-Ao Gu
Journal of Electrochemistry
The surface adsorption of benzoimidazole (BIMH) and 2-mercaptobenzimidazole( MBI) was investigated by electrochemical in-situ surface enhanced Raman spectroscopy (SERS) and direct electrochemical synthesis on Cu electrode. The influence of the neutral ligand of triphenylphosphine (pph3) on the adsorption and surface coordination of BIMH and MBI were investigated respectively. BIMH interacted with metal surface by the neutral molecule to form chemical adlayer in the extremely negative potential,while it adsorbed onto metal surface through the N atoms to form a polymer film which may suppress the corrosion of the metal. The introduction of pph3 destroyed the film formation of BIMH on Cu …
In Situ Surface-Enhanced Raman Scattering Spectroscopic Study Of Sulfur Adsorption On Polycrystalline Platinum Electrode Surface, Bolian Xu-, In-Su Park, Ying Li, De-Jun Chen, Yuye J. Tong
In Situ Surface-Enhanced Raman Scattering Spectroscopic Study Of Sulfur Adsorption On Polycrystalline Platinum Electrode Surface, Bolian Xu-, In-Su Park, Ying Li, De-Jun Chen, Yuye J. Tong
Journal of Electrochemistry
The paper reports the first in situ surface enhanced Raman scattering (SERS) spectroelectrochemistry study of sulfur adsorption and electro-oxidation on highly roughened polycrystalline Pt surface in both acidic and basic supporting electrolytes. The SERS spectra were taken at a constant electrode potential after accumulative electro-oxidation CVs of the Pt electrode with pre-adsorbed sulfur species and at different electrode potentials that were varied stepwise of the Pt electrode immersed in sulfur-containing electrolytes without pre-adsorbed sulfur species. In both cases,a dominant vibrational band at 299 cm -1 in acidic electrolyte but at 310 cm-1 in basic electrolyte was observed,which was assigned to …
Comparative Study Of Nanoporous Pt,Ptru And Ptruir Catalysts Using Electrochemical Ftir Spectroscopy, M. Amussen Robert, Holt-Hindle Peter, Nigro Samantha, Chen Aicheng
Comparative Study Of Nanoporous Pt,Ptru And Ptruir Catalysts Using Electrochemical Ftir Spectroscopy, M. Amussen Robert, Holt-Hindle Peter, Nigro Samantha, Chen Aicheng
Journal of Electrochemistry
In recent years much effort has been put towards developing efficient Pt-based electrocatalysts for applications in fuel cells. With the rising cost of precious metals such as Pt,the need to enhance the activity and to decrease the load of catalysts is prominent. Herein we report on the synthesis and comparative study of nanoporous Pt,PtRu and PtRuIr electrocatalysts. The nanoporous electrodes were fabricated using a hydrothermal method and characterized by scanning electron microscopy (SEM) ,energy dispersive spectroscopy (EDS) ,X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) . The electrocatalytic activity of the fabricated nanopo- rous materials was evaluated using both CO …
Density Functional Theory Studies Of Surface-Enhanced Raman Spectroscopy In Electrochemical Interfaces, Liu-Bin Zhao, De-Yin Wu, Bin Ren, Zhong-Qun Tian
Density Functional Theory Studies Of Surface-Enhanced Raman Spectroscopy In Electrochemical Interfaces, Liu-Bin Zhao, De-Yin Wu, Bin Ren, Zhong-Qun Tian
Journal of Electrochemistry
Quantum chemical density functional theory and Raman scattering theory were used to study the bonding mechanism and surface-enhanced Raman spectroscopy of pyridine adsorbed on transition metals (Ⅷ group) and coinage metals (IB group) . SERS studies of pyridine-metal systems have been reviewed. Chemical bonding mechanism as well as photo-driven charge transfer mechanism was considered to investigate the vibrational frequency shift and the enhancement of SERS intensity in electrochemical interfaces. Our theoretical results can be used to interpret the SERS phenomena dependent on metals,excitation wavelengths,and applied potentials.
Optimization Of Membrane Electrode Assembly In Air-Breathing Direct Methanol Fuel Cell, Liang Ma, Wei-Wei Cai, Jing Zhang, Liang Liang, Jian-Hui Liao, Chang-Peng Liu, Wei Xing
Optimization Of Membrane Electrode Assembly In Air-Breathing Direct Methanol Fuel Cell, Liang Ma, Wei-Wei Cai, Jing Zhang, Liang Liang, Jian-Hui Liao, Chang-Peng Liu, Wei Xing
Journal of Electrochemistry
The structure and performance of MEA were optimized by tailoring the catalyst layer,cathodic microporous layer ( MPL) ,anodic MPL and membrane,with the considerations of unique characteristics of airbreathing direct methanol fuel cell ( DMFC) such as methanol crossover and cathode flooding. It was found that high catalyst loading could suppress the methanol crossover effectively,but too high catalyst loading can lead to high mass transport resistance. Hydrophobic anodic MPL with 30% ( by mass) PTFE could facilitate the CO2 bubble detachment,which decreased the methanol concentration gradient and suppressed the methanol crossover accordingly. When Nafion 115 was used as membrane,methanol crossover was …
Electrocatalytic Oxidation Of Hcooh At Au_(Core)-Pd_(Shell)-Pt_(Cluster) Nanocubes, Qing-Ning Jiang, Huan Li, Ning Yang, Ping-Ping Fang, Feng-Ru Fan, Zhong-Qun Tian
Electrocatalytic Oxidation Of Hcooh At Au_(Core)-Pd_(Shell)-Pt_(Cluster) Nanocubes, Qing-Ning Jiang, Huan Li, Ning Yang, Ping-Ping Fang, Feng-Ru Fan, Zhong-Qun Tian
Journal of Electrochemistry
Gold nanocubes were synthesized by a two-step seed-mediated growth method. The Aucore-Pdshell and Aucore-Pdshell-Ptcluster nanocubes with controllable shell thickness of Pd and cluster coverage of Pt were synthesized by simply changing the amount ratio of H2PdCl4 or H2PtCl6. The samples were characterized by scanning electron microscope ( SEM) 、transmission electron microscopc ( TEM) and cyclic voltammetry ( CV) . CV was then used to make a systematic study on the dependence of the electrocatalytic properties on the shell thickness of Aucore-Pdshell and Pt coverage of Aucore-Pdshell-Ptcluster,respectively. The results indicated that the Au nanocube core coated by three atomic layers of …
Preparation And Application Of Ti/Ceo_2-F-Pbo_2 Electrode In Electrochemical Degradation Of Organics, Xun-Hua Wang, Tie-Ming Zhang, Shao-Ping Tong, Chun-An Ma
Preparation And Application Of Ti/Ceo_2-F-Pbo_2 Electrode In Electrochemical Degradation Of Organics, Xun-Hua Wang, Tie-Ming Zhang, Shao-Ping Tong, Chun-An Ma
Journal of Electrochemistry
The CeO2-modified PbO2 on Ti plate ( Ti/CeO2-F-PbO2) was prepared by electrodeposition. The SEM and XRD analyses indicated that the CeO2 particle could be beuniformly co-deposited in the film of PbO2. The results of electrochemical test showed that the Ti/CeO2-F-PbO2 anode had higher potential ( 1. 83 V. vs. SCE) for oxygen evolution ( OE) than the Ti/F-PbO2 anode ( 1. 78 V,vs. SCE) . The degradation of 4-chlorophenol was carried out to test electrocatalytic performance of this novel electrode,which indicated that Ti/CeO2-F-PbO2 anode had high COD removal rate and instantaneous current efficiencies ( ICE) .
Electrochemical Behaviors Of Hydrazine In Bmimpf_6 Solution At Ag Electrode, Jie Sun, Yan Li, Yi-Ling Feng, Rong Wang, Xia-Qin Wu
Electrochemical Behaviors Of Hydrazine In Bmimpf_6 Solution At Ag Electrode, Jie Sun, Yan Li, Yi-Ling Feng, Rong Wang, Xia-Qin Wu
Journal of Electrochemistry
In this work,the electrochemical behaviors of hydrazine at Ag electrode in the room temperature ionic liquid,BmimPF6,were studied by cyclic voltammetry. Results suggested that Ag electrode showed a good catalytic activity towards hydrazine oxidation. The catalytic peak current showed a good linear relationship with the hydrazine concentration in the range of 0 ～ 3. 4 mmol/L. The rate-determining step of the electrocatalytic reaction involved one electron transfer form hydrazine molecule to Ag + ion.
Prerapation And Supercapacitor Property Of Mesoporous Carbon Nanofibers, Yong-Wen Wang, Ming-Bo Zheng, Jian Cao, Jie-Ming Cao, Guang-Bin Ji, Jie Tao
Prerapation And Supercapacitor Property Of Mesoporous Carbon Nanofibers, Yong-Wen Wang, Ming-Bo Zheng, Jian Cao, Jie-Ming Cao, Guang-Bin Ji, Jie Tao
Journal of Electrochemistry
Two different mesoporous carbon nanofibers with large mesopore or core-shell structure were prepared by using the resol/F127 mixture to fill the AAO template. The morphology and structural parameters of the samples were characterized by SEM,TEM,and N2 adsorption-desorption analysis. The supercapacitive behaviors of the electrodes were tested by cyclic voltammetry and galvanostatic charge-discharge. The results show that the specific capacitances of mesoporous carbon nanofibers increased obviously and the fine supercapacitive performances were achieved at high scan rate or large current density.
Synthesis And Electrochemical Properties Of Li_3v_2(Po_4)_3/C Cathode Materials For Lithium Ion Battery, Li-Ying Liu, Hai-Yan Zhang, Lian Chen, Yu-Chun Zhai
Synthesis And Electrochemical Properties Of Li_3v_2(Po_4)_3/C Cathode Materials For Lithium Ion Battery, Li-Ying Liu, Hai-Yan Zhang, Lian Chen, Yu-Chun Zhai
Journal of Electrochemistry
Cathode material Li3V2( PO4) 3 /C for Lithium-ion battery was synthesized by combination of ball milling and baking. Physical and electrochemical performances of as-prepared materials were characterized through XRD,EIS and galvanostatic cell cycling. The results show that the products were monoclinic Li3 V2 ( PO4) 3 with well-developed crystal structure. At 0. 1C,0. 25C and 0. 5C,the initial discharge capacities were 150. 6,134. 1 and 107. 1 mAh·g-1 ,respectively. Capacity retention rates were 87. 3% after 130 cycles at 0. 25C and 87. 2% after 105 cycles at 0. 5C. Charge-discharge efficiencies were all above 80% and the average discharge …
Nano-Sized Au On Nickel Foam As Cathode Of Alkaline Al-H_2o_2 Semi Fuel Cell, Shu-Li Chen, Bang-An Lu, Yao Liu, Gui-Ling Wang, Dian-Xue Cao
Nano-Sized Au On Nickel Foam As Cathode Of Alkaline Al-H_2o_2 Semi Fuel Cell, Shu-Li Chen, Bang-An Lu, Yao Liu, Gui-Ling Wang, Dian-Xue Cao
Journal of Electrochemistry
Nano-sized Au particles were deposited on a nickel foam substrate by a fast spontaneous deposition method using AuCl3 as the source of Au. The effects of AuCl3 concentration and deposition time on the size and distribution of Au particles,and the performance of the obtained Au/Ni electrode as the cathode of Al-H2O2 semi fuel cell were investigated. It was found that after the nickel foam was immersed in a 2 mmol·L-1 AuCl3 solution for 60 s,Au particles with diameters smaller than 100 nm were deposited on its surfaces and cover the surface completely. The Al-H2O2 semi fuel cell with Au/Ni cathode …
Blocking Method In Enzyme-Amplified Amperometric Dna Biosensor, Miao He, Wei Chen, Xiong-Wei Xu, Ai-Lin Liu, Xin-Hua Lin
Blocking Method In Enzyme-Amplified Amperometric Dna Biosensor, Miao He, Wei Chen, Xiong-Wei Xu, Ai-Lin Liu, Xin-Hua Lin
Journal of Electrochemistry
Non-specific absorption of enzyme and nucleotide is a main source leading to the background staining in enzyme-amplified amperometric detection of DNA. To eliminate the background staining in this system, the blocking procedure by mercapto-hexanol ( MCH) and bovine serum albumin ( BSA) was studied systematically. The results show that the anti-fouling effect of BSA is better than that of MCH. A simple and efficient blocking strategy employing BSA as the sole blocking reagent was established and applied in the detection of PMLRARα fusion gene in acute promyelocytic leukemia. It can effectively eliminate the background staining,shorten the pre-processing time,and achieve strong …
A High Performance Sulfur/Carbon Xerogel Composite In Lithium Sulfur Battery Application, Chong Wang, Jia-Jia Chen, Qiu-Jie She, Qian Zhang, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong
A High Performance Sulfur/Carbon Xerogel Composite In Lithium Sulfur Battery Application, Chong Wang, Jia-Jia Chen, Qiu-Jie She, Qian Zhang, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong
Journal of Electrochemistry
Sulfur/carbon composite was synthesized by the thermal method with the carbon xerogel as the conductive framework. The property of composite was characterd by XRD and SEM. It shown that the composite with the particle size below 10 μm had the same morphology as the carbon xerogel and the sulfur was absorbed in the pores in non-crystalline. The discharge capacity of the composites were 1311 mAh/g and 1107. 1 mAh/g at 0. 1C and 0. 2 C rates,respetively. And a retention capacity was about 800 mAh/g after 30 cylcyes.
Preparation And Electrochemical Performance Of Three-Dimensional Porous Snco Alloy Electrode, Lian-Jie Xue, Ling Huang, Fu-Sheng Ke, Guo-Zhen Wei, Xiao-Mei Zheng, Jun-Tao Li, Xiao-Yong Fan, Shi-Gang Sun
Preparation And Electrochemical Performance Of Three-Dimensional Porous Snco Alloy Electrode, Lian-Jie Xue, Ling Huang, Fu-Sheng Ke, Guo-Zhen Wei, Xiao-Mei Zheng, Jun-Tao Li, Xiao-Yong Fan, Shi-Gang Sun
Journal of Electrochemistry
Three-dimensional porous Cu film was prepared by electroless plating,and used as a current collector for preparation of three-dimensional structured SnCo alloy electrode,which was mainly prepared by an electrodeposition method,and composed of pure Sn and CoSn2 phases. Electrochemical experimental results show that three-dimensional structured SnCo alloy electrode exhibits much better cycleability than planar SnCo alloy electrode,with first discharge capacity and charge capacity of 636. 3 and 528. 7 mAh·g-1,respectively. After 70th cycling,capacity retention is 83. 1% with 529. 5 mAh·g-1. The lithiation process during first discharge was investigated by electrochemical impedance spectroscopy
Nano/Micro-Structured Electrode Materials For Lithium-Ion Batteries, Yu-Guo Guo, Zhong-Li Wang, Xing-Long Wu, Wei-Ming Zhang, Li-Jun Wan
Nano/Micro-Structured Electrode Materials For Lithium-Ion Batteries, Yu-Guo Guo, Zhong-Li Wang, Xing-Long Wu, Wei-Ming Zhang, Li-Jun Wan
Journal of Electrochemistry
Nanostructured materials are currently of interest as high performance anodes and cathodes for rechargeable lithium-ion batteries because of their novel nano-size effects and significantly enhanced kinetics. This review paper describes some recent developments in this field,addressing the size effects,morphology effects,as well as the functions of carbon coating layers toward lithium storage. Several"kinetically stabilized"nano/microstructured electrode materials and high-rate electrode materials with mixed-conducting networks based on the work of the authors are highlighted for illustration.
Measurement And Wavelet Analysis Of The Electrochemical Noise Of Rebar Steel In Simulated Concrete Pore Solution, Rong-Gang Hu, Chen-Qing Ye, Shi-Gang Dong, Chang-Jian Lin
Measurement And Wavelet Analysis Of The Electrochemical Noise Of Rebar Steel In Simulated Concrete Pore Solution, Rong-Gang Hu, Chen-Qing Ye, Shi-Gang Dong, Chang-Jian Lin
Journal of Electrochemistry
Electrochemical noise ( ECN) measurement can provide information about both corrosion rate and corrosion type while inflicting no perturbation on the studied system. The ECN data of steel rebar in SPS with different amount of Cl-were collected and treated by discrete wavelet transformation to evaluate the contribution from transients in different frequency in the overall signals. Energy distribution plot( EDP) indicated in SPS with 0. 0001 mol/L NaCl,the transients with time constant between 16 ～ 32 s were found to be predominant over other processes; while in SPS with higher Cl-concentration,the trend toward active corrosion became the main process. It …
High-Rate Cyclic Properties Of Hollow Carbon Hemisphere As Anode Materials For Lithium Ion Batteries, Guang-Hui Zhang, Zao-Xue Yan, Hong-Li Zou, Pei-Kang Shen
High-Rate Cyclic Properties Of Hollow Carbon Hemisphere As Anode Materials For Lithium Ion Batteries, Guang-Hui Zhang, Zao-Xue Yan, Hong-Li Zou, Pei-Kang Shen
Journal of Electrochemistry
High surface area hollow carbon hemispheres ( HCHs) covered with hard carbon layers have been synthesized by using polystyrene spheres ( PSs) as templates under hydrothermal method combined with the intermittent microwave heating ( IMH) method. The morphologies of the materials are characterized by SEM and TEM. The electrochemical properties of the HCHs are tested. Comparing with graphite and mesocarbon microbeads ( MCMB) ,the HCHs show higher capacity and excellent cyclic life performance.
Research On Electrochemical Performance Of Lithium-Ion Battery Cathode Material Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 In Aqueous Lino_3 Solution, Jun Zheng, Xin Jia, Chong Wang, Ming-Sen Zheng, Quan-Feng Dong
Research On Electrochemical Performance Of Lithium-Ion Battery Cathode Material Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 In Aqueous Lino_3 Solution, Jun Zheng, Xin Jia, Chong Wang, Ming-Sen Zheng, Quan-Feng Dong
Journal of Electrochemistry
The cathode material of LiNi1/3Co1/3Mn1/3O2 synthesized by sol-gel method shows excellent high rate performance,and high output power density during discharge process. A well-ordered layered α-NaFeO2 structure was confirmed by XRD and a primary particle size of about 500 nm was indicated by SEM. Galvanostatic charge-discharge test indicates that LiNi1/3Co1/3Mn1/3O2 in 2 mol·L-1 LiNO3 aqueous solution with pH 12 reached a ca-pacity of 147 mAh/g while charged and discharged at 2C. The capacities were 64、33、16 mAh/g with 80C ( 14. 4 A/g) 、150C( 27 A/g) and 220C ( 39. 6 A/g) charge/discharge rates,while the power densities of the battery were 2574 …
Fabrication Of Electrochemically Activated Glassy Carbon/Bismuth Film Electrodes For Sensitive Analysis Of Pb～(2+) And Cd～(2+), Kang Shi, Wen-Jing Wang, Kun Hu
Fabrication Of Electrochemically Activated Glassy Carbon/Bismuth Film Electrodes For Sensitive Analysis Of Pb～(2+) And Cd～(2+), Kang Shi, Wen-Jing Wang, Kun Hu
Journal of Electrochemistry
The application of electrochemically activated glassy carbon ( GC) in the in-situ preparing of bismuth film electrodes ( BiFEs) to analyze Pb2 + and Cd2 + was investigated. The glassy carbon electrodes were electrochemically activated by either potentiostic or cyclic polarization in 1 mol·L-1 NaOH solution. Experimental results show that employment of HCl solution as the analytical solution not only can reproducibly renew the electrochemically activated GC electrode surface with an electrochemical clear procedure,but also can greatly enhance the sensitivity of BiFes method for analysis of Pb2 + and Cd2 + . The test range thus was extended to the …
Synthesis Of Cosalen Composite In Apo-5 And Its Electrocatalytic Behaviour For Reaction Of Dioxygen Reduction, Rong Zhang, Li-Hua Tang, Bin-Bin Fan, Jing-Hong Ma, Rui-Feng Li
Synthesis Of Cosalen Composite In Apo-5 And Its Electrocatalytic Behaviour For Reaction Of Dioxygen Reduction, Rong Zhang, Li-Hua Tang, Bin-Bin Fan, Jing-Hong Ma, Rui-Feng Li
Journal of Electrochemistry
CoAPO-5 molecular sieve was hydrothermally synthesized. The Cobalt ions in CoAPO-5 were coordinated with the SALEN ligend diffusing into the channels of the molecular sieve to form CoSALEN complexes. The electrochemical behaviors and electrocatalysis for dioxygen reduction of the CoSALEN complex immobilized in APO-5 modified glassy carbon electrodes ( GCEs) have been investigated by cyclic voltammetry( CV) and chronoamperometry ( CA) in differrent pH aqueous solutions. The results showed that the PS/CoSALEN/APO-5 /GC modified electrode is of the high electrocatalytic activity towards dioxygen reduction in pH 6. 86 buffer solution with a reduced overpotential of 447 mV lower than bare …
Failure Reaction Mechanism Of Internal Short-Circuit For Lithium-Ion Batteries, He Li, Shen-Jun Yu, Zhi-Kui Chen, Guang-Chuan Liang
Failure Reaction Mechanism Of Internal Short-Circuit For Lithium-Ion Batteries, He Li, Shen-Jun Yu, Zhi-Kui Chen, Guang-Chuan Liang
Journal of Electrochemistry
In this work,the battery impact testing machine has been used to study the failure progress of internal short-circuit ( ISC) for lithium ion batteries. The reaction mechanisms between cathode/anode and electrolyte in the battery at different temperatures were characterized by differential scanning calorimetry ( DSC) ,gas chromatography/mass spectrometry ( GC/MS) and X-ray diffraction ( XRD) . The experimental results show that the ISC failure of the battery was mainly due to the reaction between cathode Li0.5CoO2 and electrolyte. The decomposition and oxygen evolution reactions of cathode occurred when the temperature reached a certain value. At the same time a fierce …
Influence Of Ions Dimension On The Electric Field Activation Of Micro-Crystallite Carbon, Gang-Wei Sun, Wen-Hua Song, Guo Cheng, Wen-Ming Qiao, Li-Cheng Ling
Influence Of Ions Dimension On The Electric Field Activation Of Micro-Crystallite Carbon, Gang-Wei Sun, Wen-Hua Song, Guo Cheng, Wen-Ming Qiao, Li-Cheng Ling
Journal of Electrochemistry
Micro-crystallite carbon ( CC) was synthesized by KOH activation of carbonized petroleum coke precursors. The porous properties structure and crystallite structure were characterized by N2 adsorption-desorption, X-ray diffraction ( XRD) measurements. The capacitive behavior of CC was investigated in the electrolyte of Et4NBF4 /PC,Et4NBF4 /AN,Bu4NBF4 /PC and Bu4NBF4 /AN,respectively. Results showed that the lower potential of electric field activation ( EFA) was obtained in the solvent of AN than in PC,which was ascribed to the fact that smaller solvated ions dimension in AN facilitating the intercalation of the solvated ions into micro-crystallite interlayer. The extent of EFA was more remarkable …
Hydrogen Evolution Reaction Activtity Of Ni-Ru-Ir Oxide Cathode Coating, Yin-Hui Fu, Xue-Ming Li, Wu-Lin Li, Jun Zhang
Hydrogen Evolution Reaction Activtity Of Ni-Ru-Ir Oxide Cathode Coating, Yin-Hui Fu, Xue-Ming Li, Wu-Lin Li, Jun Zhang
Journal of Electrochemistry
The Ni-Ru-Ir electrode coating was fabricated by thermal decomposition and oxidation. Electrochemical properties of Ni-Ru-Ir electrode coating and pure nickel cathode in the 30% NaOH solutions at 90 ℃( conditions of the industrial electrolysis) ,have been investigated by cyclic voltammetry,Tafel curves and chronoamperometry. The results show that the Ni-Ru-Ir oxide electrode coating exhibited high catalytic activity. At the current density of 0. 3 A·cm-2,the lowest hydrogen evolution overpotential of Ni-Ru-Ir oxide electrode coating was about 300 mV lower than Ni. The roughness and excharge current density of Ni-Ru-Ir electrode coating were 32 and 4 times,respectively,larger than those of pure nickel …
Study On Electrocatalytic Properties For Oxygen Evolution Of Ti/Iro_2-Ta_2o_5 Anodes With Different Ir Contents, Yong-Lei Xin, Li-Kun Xu, Jun-Tao Wang
Study On Electrocatalytic Properties For Oxygen Evolution Of Ti/Iro_2-Ta_2o_5 Anodes With Different Ir Contents, Yong-Lei Xin, Li-Kun Xu, Jun-Tao Wang
Journal of Electrochemistry
The anodes of Ti/IrO2-Ta2O5 were prepared by Pechini method. The effects of coating loading on the surface morphology and electrochemical properties of the anodes were characterized by scanning electron microscope ( SEM) ,energy dispersive X-ray detector ( EDX) ,potentiodynamic polarization,cyclic voltammetry and accelerated life test. The results indicate that with the increase of the coating loading,the oxide anode presents evident IrO2 crystallite segregation,and cracks become narrow and shallow. Moreover,it has larger electrochemically active surface area,better electrocatalytic activity for oxygen evolution and higher stability. It was observed that for an iridium content of 1. 98 ～ 9. 08 g/m2 the service …
Electrochemical Behavior Of Kaempferide Interaction With Protein, Li-Qing Lin, Xin-Hua Lin, Jing-Hua Chen, Li-Ying Huang, Yin-Huan Liu, Guang-Wen Li
Electrochemical Behavior Of Kaempferide Interaction With Protein, Li-Qing Lin, Xin-Hua Lin, Jing-Hua Chen, Li-Ying Huang, Yin-Huan Liu, Guang-Wen Li
Journal of Electrochemistry
The electrochemical behavior of kaempferide at activated GCE and the interaction of kaempferide with human serum albumin( HSA) were investigated by cyclic voltammetry. A differential pulse voltammetric method has been proposed for the determination of the HSA with kaempferide. In pH 4. 5 phosphate buffer solutions ( PBS) kaempferide can react with HSA to form an electrochemically non-active supermolecular complex at activated GCE,resulting in the decrease of oxidation peak ( at 0. 468 V) without the change of peak potential. The decrease of the peak current is proportional to HSA concentration in the range of 0. 05 ～ 0. 25 …
Synthesis Of High-Performance Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 Cathode Materials Via Azeotropic Distillation Method, Sheng-An Xia, Li-Xia Yuan, Ze Yang, Zhao-Hui Wang, Yun-Hui Huang, Shuang Li, Wu-Xing Zhang, Ya-Bin Meng, Wei-Gong Zheng
Synthesis Of High-Performance Lini_(1/3)Co_(1/3)Mn_(1/3)O_2 Cathode Materials Via Azeotropic Distillation Method, Sheng-An Xia, Li-Xia Yuan, Ze Yang, Zhao-Hui Wang, Yun-Hui Huang, Shuang Li, Wu-Xing Zhang, Ya-Bin Meng, Wei-Gong Zheng
Journal of Electrochemistry
Layered LiNi1/3Co1/3Mn1/3O2 is one of the most promising alternative materials for LiCoO2 in lithium ion batteries due to its low cost,large capacity and excellent cyclability.In this paper,LiNi1/3 Co1/3 Mn1/3 O2 was synthesized via azeotropic distillation method with isobutyl alcohol as an azeotropic agent.The structure and surface morphology were characterized by X-ray diffraction(XRD) and scanning electron microscope(SEM),respectively.The as-prepared LiNi1/3Co1/3Mn1/3O2 shows a layered α-NaFeO2 structure;the particles are small and uniformly distributed.As compared with the sample prepared by traditional method,the present cathode material exhibits superior cyclability and rate capability,which can be ascribed to the enhanced Li + diffusion due to smaller and more …
Studied Corrosion Behaviors Of Reinforcing Steel In Concrete By A Single-Dimensional Array Electrode, Lan-Qiang Li, Shi-Gang Dong, Rong-Gui Du, Chang-Jian Lin
Studied Corrosion Behaviors Of Reinforcing Steel In Concrete By A Single-Dimensional Array Electrode, Lan-Qiang Li, Shi-Gang Dong, Rong-Gui Du, Chang-Jian Lin
Journal of Electrochemistry
A single-dimensional array electrode was developed as a new electrochemical technique to image corrosion potential,galvanic current and polarization curves of reinforcing steel in concrete during corrosion process.Combining with the polarization behavior for each micro-electrode,the interactions between corrosion macrocell and corrosion microcell of the steel in concrete were evaluated.It was noticed that the corrosion macrocell and microcell occurred independently in difference regions at the initial stage of corrosion.The corrosion macrocell current can be in situ followed by corrosion potential imaging.The corrosion propagation of steel in concrete is closely related to the interactions between corrosion macrocell and corrosion microcell.
Electrochemical Behavior Of Europium(Ⅲ) In 1-Butyl-3-Methylimidazolium, Qiu-Yue Zhang, Hui He, Xiao-Hong Huang, Guo-An Ye
Electrochemical Behavior Of Europium(Ⅲ) In 1-Butyl-3-Methylimidazolium, Qiu-Yue Zhang, Hui He, Xiao-Hong Huang, Guo-An Ye
Journal of Electrochemistry
The electrochemical behavior of EuCl3 in 1-butyl-3-methylimidazolium chlorid([BMIM]Cl) has been investigated in the temperature range of 328 ～ 348 K by cyclic voltammetry.Influences of scan speed and temperature in [BMIM]Cl have been examined.The electrochemical window of [BMIM]Cl was-1.7 V ～ 0.80 V(vs.Ag/AgCl),when the working electrode was glassy carbon electrode.Eu3+ in[BMIM]Cl underwent a single step one-electron transfer reduction to Eu2 +,which is quasi-reversible reaction controlled by both electron transfer and diffusion of ions.The diffusion coefficient of Eu3 + in [BMIM]Cl increased with increase of temperature from 3.75 × 10-9 cm2 /s at 328 K to 1.32 × 10-8 cm2 /s at …
Investigation Of Ceo_2 As Cathode Electrocatalyst For Direct Borohydride Fuel Cell, Xue-Min Ni, Ya-Dong Wang, Mu Pan
Investigation Of Ceo_2 As Cathode Electrocatalyst For Direct Borohydride Fuel Cell, Xue-Min Ni, Ya-Dong Wang, Mu Pan
Journal of Electrochemistry
The performance of CeO2 as oxygen reduction electrocatalyst in direct borohydride fuel cell was investigated.The experimental results indicate that CeO2 shows significant electrocatalytic performance for oxygen reduction and exhibits no observed promotion effect on hydrolysis or electro-oxidation of BH 4-.The power density of experimental one-compartment fuel cell with CeO2 as cathode electrocatalyst can reach a 67.8 mW·cm-2 at room temperature.