Materials Chemistry Commons^™

Synthesis, Molecular Characteristics, And Antibacterial Assessment Of Marine Hydroid Aqueous Extract-Based Silver Bio-Nanoparticles, Fredryk Mandey, Aulia Rhamdani Arfan, Rugaiyah Andi Arfah

Makara Journal of Science

This investigation aims to synthesize, analyze the molecularity, and test the ability of bacterial inhibition capability of silver nanoparticles that have been synthesized by simply mixing silver nitrate and aqueous extracts of marine natural products with and without the addition of amylum as a stabilizing agent. This research, with and without the addition of amylum as a stabilizing agent, obtained 39.0 and 55.2 mg of solids of round-shaped morphology silver nanoparticles with diameters of 87.9 and 103.0 nm., respectively. In addition, the antibacterial testing assay against Staphylococcus aureus and Escherichia coli showed some considerably good results. S. aureus with the …

Synthesizing, Purifying, And Characterizing Molten Chloride Salts, Phillip W. Halstenberg

Doctoral Dissertations

Molten chloride salts have vast potential as heat transfer fluids with both nuclear and concentrated solar power applications. For application in energy systems, the characteristics that govern these systems must be well understood. This work focuses on inorganic molten chloride salts with a special emphasis on the experimental aspect of chemical research. Chapter 2 covers the synthetic approaches for the formation of molten chloride mixtures. Many salts can be purchased from industrial suppliers, but most must be purified therefore, Chapter 3 evaluates various methodology developed for removal of impurities in salt mixtures. Once the salt of proper content and purity …

Exploring The Role Of Ring Annulation In Polycyclic Aromatic Hydrocarbons For Organic Electronic Applications, Tanner Smith

Theses and Dissertations--Chemistry

Organic materials offer promising potential for the next generation of electronic devices, as their tunability, processability, and low-temperature manufacturing make them a cheap and versatile alternative to traditional silicon-based electronics. The ability to systematically alter the electronic properties of organic materials is vital for their incorporation into device applications. Polycyclic aromatic hydrocarbons (PAHs) are of significant interest for organic electronic applications, as relevant properties are highly dependent on their size, structure, and functionalities, and thus can be tuned to fit a wide variety of applications. Due to the enormous number of structural isomers available in larger PAHs, the development of …

Optimization Of The Synthesis Parameters Of Sapo-34, Adam Honchar

Undergraduate Student Research Internships Conference

A microporous material known as SAPO-34 is a very efficient catalyst in methanol-to-olefins reactions. My project aimed to optimize synthesis parameters of SAPO-34 to reduce crystallization time in order to study the formation mechanism using In-situ NMR spectroscopy. Understanding the crystallization mechanism would allow us to make it more efficient and tailor-made to fit for other applications.

Facile Synthesis Of Metal Oxides, Sulphides, And Phosphides For Enhanced Energy Applications, Alfred Nkhama

Electronic Theses & Dissertations

An access to reliable, sustainable, eco-friendly and cost-effective energy supply is being challenged by the global increase in population and the rapid technological advancement. Sophisticated systems, machinery and various devices being innovated, require the steady energy supply for their operations and applicability. To have reliable energy, numerous researches are being conducted through various approaches across the world. In this research work, the facile approach in investigating and tuning the materials properties was employed to improve energy properties of metal oxides. Nanostructured NiFe-oxide and CoFe-oxide were synthesized using a facile coprecipitation method. It was revealed that; nanostructured materials have favorable structures …

Fabrication Of Metal-Silicon Nanostructures By Reactive Laser Ablation In Liquid, Eric J. Broadhead

Theses and Dissertations

Metal-silicon nanostructures are a growing area of research due to their applications in multiple fields such as biosensing and catalysis. In addition, silicon can provide strong support effects to metal nanoparticles while being more cost effective than traditionally used supports, like titania. Traditional wet-chemical methods are capable of synthesizing metal-silicon nanostructures with a variety of composition and nanoparticle shapes, but they often require high temperatures, toxic solvents, strong reducing agents, or need capping agents added to stabilize the nanoparticles. Laser processing is an emerging technique capable of synthesizing metal-silicon composite surfaces that offers a faster, simpler, and greener synthesis route …

Synthesis, Crystal Engineering, And Material Properties Of Small-Molecule Organic Semiconductors, Emma Holland

Theses and Dissertations--Chemistry

Small-molecule organic materials are of increasing interest for electronic and photonic devices due to their solution processability and tunability, allowing devices to be fabricated at low temperature on flexible substrates and offering utility in specialized applications. This tunability is the result of functionalization through careful synthetic strategy to influence both material properties and solid-state arrangement, both crucial variables in device applications. Functionalization of a core molecule with various substituents allows the fine-tuning of optical and electronic properties, and functionalization with solubilizing groups allows some degree of control over the solid- state order, or crystal packing. These combinations of core chromophores …

Mild Synthesis Of Perylene Tetracarboxylic Monoanhydrides With Potential Applications In Organic Optoelectronics, Xizhe Zhao

Dissertations, Theses, and Capstone Projects

Perylene tetracarboxylic derivatives are considered good n-type semi-conductors. In past decades, there has been extensive study on their synthesis and electronic properties. Because of the high electron affinity, the ability to form π-π stacks, they have been widely utilized in organic photovoltaic solar cells, field-effect transistors and light-emitting diodes. Many of those applications prefer unsymmetrically substituted perylene tetracarboxylic derivatives. Perylene monoanhydrides are the most versatile intermediates for the preparation of unsymmetrically substituted perylene tetracarboxylic derivatives. In this thesis, I focused on introducing new synthesis methods for perylene monoanhydrides with labile functional group and their potential applications in organic optoelectronics.

In …

Evaluating The Scalability Of Graphene Synthesis, Evan Dexter

Scholar Week 2016 - present

Graphene is a new material, first isolated in 2004, consisting of one to a few atomic layers of carbon in a lattice sheet structure. Graphene has high tensile strength, high surface area, very low electrical resistance, and various other special properties that make it an excellent material for use in emerging technologies in the categories of electrical components, energy systems, and high strength applications. The production scale of graphene sheets and its variations is currently limited to laboratory use, with a great amount of current research going into the development of manufacturing techniques of the material. I conducted experiments to …

From Flasks To Applications: Design And Optimization Of Giant Quantum Dots Using Traditional And Automated Synthetic Methods, Christina J. Hanson

Nanoscience and Microsystems ETDs

Semiconducting nanocrystals, also known as quantum dots (QDs), that emit light with near-unity quantum yield and are extremely photostable are attractive options as down-conversion and direct electricity-to-light materials for a variety of applications including solid-state lighting, display technologies, bio-imaging and optical tracking. Standard QDs with a core/thin shell structure display fluorescence intermittency (blinking) and photobleaching when exposed to prolonged room temperature excitation for single dot measurements, as well as significant reabsorption and energy transfer when densely packed into polymers or at high solution concentrations.

We have developed thick shell “giant” QDs (gQDs), ultra-stable photon sources both at the ensemble and …

Systematic Size Control In The Synthesis Of Zero-Valent Iron Nanoparticles, Grant C. Bleier

Chemistry and Chemical Biology ETDs

A novel synthetic method for the production of highly magnetic, low size-dispersity nanoparticles through reversible magnetic agglomeration is introduced and studied in detail. Initially, a weakly coordinating surfactant (3-octadecyl-2,4-pentanedione) is employed to produce a wide range of nanoparticle sizes ranging from 8 to 20 nm in diameter. The kinetics faced in these reactions by cheap and widely available iron complex precursors can be avoided in this method with the introduction of thermodynamic control, which occurs in the form of a magnetic precipitation event that essentially halts nanoparticle growth. Utilizing this synthetic method, the length of the alkyl chain on the …

The Effect Of Oxidation, Thionation, And Dimerization On The Self-Assembly And Photophysical Properties Of Novel Discotic Materials, Katie M. Psutka

Theses and Dissertations (Comprehensive)

This thesis aims to increase understanding of the relationship between molecular structure and liquid crystalline temperature range by exploring the effects of oxidation, thionation, and dimerization on the self-assembly and properties of novel discotic materials. First, two alkoxy-substituted dibenzanthracenequinones were prepared by oxidation of the corresponding dibenzanthracenes. The quinone induced a liquid crystalline phase in the hexaalkoxy dibenzanthracene derivative, but not in the tetralkoxy derivative. However, both of the resulting materials were un-reactive to any further synthetic modifications that could be used to improve their properties. In comparison, two heteroaromatic dithienoanthracenedicarboximides were successfully prepared, although the addition of the thiophene …

Controlled Synthesis And Utilization Of Metal And Oxide Hybrid Nanoparticles, Cameron Cowgur Crane

Graduate Theses and Dissertations

This dissertation reports the development of synthetic methods concerning rationally-designed, hybrid, and multifunctional nanomaterials. These methods are based on a wet chemical, solution phase approach that utilizes the knowledge of synthetic organic and inorganic chemistry to generate building blocks in solution for the growth of nanocrystals and hybrid nanostructures. This work builds on the prior knowledge of shape-controlled synthesis of noble metal nanocrystals and expands into the challenging realm of the more reactive first row transition metals. Specifically, a microemulsion sol-gel method was developed to synthesize Au-SiO2 dimers as precursors for the synthesis of segmented heterostructures of noble metals that …

Silver Nanoparticles As A Potential Solar Absorber, Benjamin Hardy

Honors Projects

This work reports the development of Silver nanoparticles implanted into a polymer as a solar absorber. The plasmonic nature of silver nanoparticle allows for adjustments to be made in its UV-VIS-NIR absorbance spectrum. A combination of different sized/shaped particles could result in ideal absorption of the majority of the solar spectrum. Allotting this with the stability of a polymer leads to potential solids or solutions that could work as a solar absorber. Tests were also performed to determine whether or not UV-C irradiation during synthesis effects the characteristics of silver nanoparticles, in particular the absorbance. Successful synthesis of silver nanoparticle …

Synthesis And Characterization Of Metallic Nanoparticles For Catalytic Applications, Sarah Smith

Theses and Dissertations

In recent years, research has focused on reducing the cost of catalysts in a variety of ways including using less expensive materials, improving the synthetic method, and increasing the catalytic activity, recovery, and recyclability. Typically with nanoparticles, the size, shape, composition, and surface coating have an effect on catalytic activity.^1-2 In this work, we focused on reducing the cost of precious metal based catalysts by altering the synthetic methods.

One way to lower the cost of synthesizing precious metal nanoparticles is by debasing the precious metal with a second cheaper more abundant metal. CuPd nanoparticles were synthesized in oleylamine …

Calculating The Energy Barriers Required To Join Metal-Organic Framework Synthesis Intermediates With Non-Equilibrium Molecular Simulation, Marcus A. Tubbs, David Cantu, Roger Rousseau, Vassiliki-Alexandra Glezakou

STAR Program Research Presentations

Metal organic frameworks are synthetic porous materials with great capacity for adsorption of carbon dioxide and methane. They chemically appear as a chain-link fence with nodes of metal connected by organic linkers. The pores between the nodes define the characteristics of the material, allowing gas particles of specific size to pass through while blocking larger particulates. While there has been success in synthesizing small amounts of metal organic frameworks, the mechanistic details behind their assembly remain unknown. Understanding the synthesis mechanism is necessary to understand the kinetics involved and be able to produce this useful material on an industrial scale. …

Developing Synthetic Methods To Prepare Discrete Metal-Organic Nanotubes, Derek L. Mull

Masters Theses

Metal-organic nanotubes (MONTs) are an emerging class of discrete materials that are the 1D variant of metal-organic frameworks (MOFs). MONTs have potential to become an alternative 1D material to carbon nanotubes, metal oxide nanotubes, and boron nitride nanotubes because they possess an organic ligand that can be functionalized and tuned for specific applications. Despite this potential, only a handful of structures have been reported and only two examples of discrete MONTs exist in the literature. It is thus imperative to develop general methods to prepare and characterize discrete MONTs to bring them to the forefront of the scientific literature.

Efforts …

Synthesis And Characterization Of Support-Modified Nanoparticle-Based Catalysts And Mixed Oxide Catalysts For Low Temperature Co Oxidation, Andrew Justin Binder

Doctoral Dissertations

Heterogeneous catalysts are responsible for billions of dollars of industrial output and have a profound, if often understated, effect on our everyday lives. New catalyst technologies and methods to enhance existing catalysts are essential to meeting consumer demands and overcoming environmental concerns. This dissertation focuses on the development of catalysts for low temperature carbon monoxide oxidation. CO [carbon monoxide] oxidation is often used as a probe reaction to test overall oxidation activity of a given catalyst and is an important reaction in the elimination of toxic pollutants from automotive exhaust streams. The work included here presents three new heterogeneous catalysts …

Synthesis, Surface Functionalization, And Biological Testing Of Iron Oxide Nanoparticles For Development As A Cancer Therapeutic, Stanley E. Gilliland Iii

Theses and Dissertations

Iron oxide nanoparticles are highly researched for their use in biomedical applications such as drug delivery, diagnosis, and therapy. The inherent biodegradable and biocompatible nanoparticle properties make them highly advantageous in nanomedicine. The magnetic properties of iron oxide nanoparticles make them promising candidates for magnetic fluid hyperthermia applications. Designing an efficient iron oxide nanoparticle for hyperthermia requires synthetic, surface functionalization, stability, and biological investigations. This research focused on the following three areas: optimizing synthesis conditions for maximum radiofrequency induced magnetic hyperthermia, designing a simple and modifiable surface functionalization method for specific or broad biological stability, and in vitro and in …

Size-Dependent Interactions Of Metal Nanoparticles With Fluorophores And Semiconductors, Liyana A. Wajira Ariyadasa

Dissertations

In recent years, nanoscale metallic particles have gained considerable interest due to their potential applications in advanced technology. Despite such interest, synthetic procedures that produce gram-scale, well-defined metallic nanoparticles with controlled size and shape, especially with diameters less than 5 nm remains a challenge. Our work has focused on developing synthetic procedures that produce well-defined platinum and palladium metal nanoparticles in the 1-5 nm size range. Thioether ligands were used as stabilizers and resulted in metal nanoparticles with controlled size. The nanoparticles were characterized using transmission electron microscopy (TEM), x-ray diffraction (XRD), selected area electron diffraction (SAED), x-ray photoelectron spectroscopy …

Modified Seed Growth Of Iron Oxide Nanoparticles In Benzyl Alcohol: Magnetic Nanoparticles For Radio Frequency Hyperthermia Treatment Of Cancer, Stanley E. Gilliland Iii

Theses and Dissertations

Iron oxide nanoparticles have received sustained interest for biomedical applications as synthetic approaches are continually developed for precise control of nanoparticle properties. This thesis presents an investigation of parameters in the benzyl alcohol synthesis of iron oxide nanoparticles. A modified seed growth method was designed for obtaining optimal nanoparticle properties for magnetic fluid hyperthermia. With a one or two addition process, iron oxide nanoparticles were produced with crystallite sizes ranging from 5-20 nm using only benzyl alcohol and iron precursor. The effects of reaction environment, temperature, concentration, and modified seed growth parameters were investigated to obtain precise control over properties …

Latent Cysteine Residues From Polymers Prepared Via Free And Controlled Radical Polymerizations, Douglas Vincent Amato

Master's Theses

One less commonly used “click” reaction is thiazolidine chemistry. Thiazolidine chemistry is a commonly used reaction used in biological systems because the reaction requires the presence of both cysteine (a common amino acid) and an aldehyde or ketone. If cysteine residues could be incorporated into a polymer then a variety of applications could be developed. Polymers containing free thiols (aka thiomers) have developed in the last decade to become great mucoadhesives. If there was a facile route to control the amount of free thiols along the polymer then more fine-tuned and potentially stronger adhesives could be made. For these reasons …

The Bench Synthesis Of Silver Nanostructures Of Variable Size And An Introductory Analysis Of Their Optical Properties, Aoife Power, Tony Betts, John Cassidy

Articles

A laboratory practical was designed for use by both undergraduate and second level students to demonstrate the synthesis and characterisation of tuneable silver colloids. It clearly illustrates the novel optical properties of silver nanoparticles compared to the bulk metal. The synthesis is both rapid and repeatable, and can be conducted on the laboratory bench at room temperature.

Synthesis Of Palladium-Based Electrocatalysis—From Pure Metal To Bimetallic Nanoparticles, Haijun Gao

Masters Theses

This thesis focuses on synthesis and characterization of palladium-based nanoparticles. Background information of the research in this thesis is provided in Chapter 1. Preparation and characterization of pure palladium nanoparticles are presented in Chapter 2. A fast and convenient method to prepare ultra small Pd nanoparticles via Pluronic P123 reduction is discussed in detail. Impregnation method and poly method are also studied in this chapter. Chapter 3 reports the studies of these methods to prepare ultra small bimetallic (bimetallic means a mixture of two metals) palladium-based nanoparticles. Oleylamine-mediated method used Pd nanoparticles prepared via P123 reduction as precursor. Ultra small …

Synthesis And Characterization Of Graphene Oxide, Jeremy A. Waddell, Arthur Cheng, Bin Chen

STAR Program Research Presentations

Graphene, a single atomic layer of sp² carbon atoms, has gotten a lot of attention from the scientific community because of its excellent mechanical and electronic properties. The mechanical exfoliation methods used to obtain graphene nanosheets are not effective for large scale manufacturing, so scalable synthesis approaches from structurally similar compounds are of great scientific interest. Graphene oxide is one such compound which is synthesized through the oxidation of graphite powder. The oxidation was performed using a modification of the previous experimental procedure. After synthesis, the powder was fabricated into graphene oxide films through vacuum filtration and transfer to …

The Synthesis Of A Homologous Series Of Alkyl Lumazines And Their Application To The Dispersion Of Carbon Nanotubes, William P. Kopcha

Master's Theses

In this thesis, the synthesis of a series of alkyl lumazine surfactants (LC_n) is reported. Their application to the dispersion of both CoMoCAT and HiPco single-walled carbon nanotubes (SWNTs) is examined in detail and the thermal stability and chirality selection properties of dispersions made with these surfactants were compared both between themselves and with an alkyl flavin surfactant (FC₁₂). Lumazine alkyl chain length exhibited some control over the quality and the quantity of SWNTs dispersed. LC₁₀ was deemed most appropriate for comparison with FC₁₂ based on considerations of solubility and nanotube individualization. …

Synthesis, Characterization, And Deuterium Labeling Of Polyamides Studied By Nuclear Magnetic Resonance Spectroscopy, Christopher Allen Lange

Dissertations

The synthesis, characterization, and deuterium labeling of polyamides have been investigated. In Chapter II, selective deuterium labeling of various polyamides was demonstrated via a facile method which does not require organic solvent or catalyst. Quantitative solution-state NMR analysis showed deuterium incorporation at the carbon alpha to the carbonyl ranged from 20-75%. Incorporation in ε-caprolactam increased with repeated treatments. Isotopic shift effects for the deuterated materials were additive for all sites within experimental error.

In Chapter III, the effect of stoichiometric imbalances on the polymerization of poly(dodecamethylene terephthalamide)was investigated. Molecular weight was varied by polymerizing the monomer salt with excess diaminododecane, …

The Synthesis, Characteristics And Performance Of Cnt Composites As Anodic Materials In Litium-Ion Battery, Quan-Feng Dong, Ming-Sen Zheng, Zhen-Cai Huang, Ming-Gang Jin, Ya-Ding Zhan, Zu-Geng Lin

Journal of Electrochemistry

As an anodic material for lithium ion battery the carbon nano-tube (CNT) and some compounds based on tin have ever been investigated intensively. The fruited progress has not been made yet, however. In this paper the composites of CNT and Sn/SnO_(2)were synthesized employing two methods and characterized by SEM and XRD. And the electrochemical performance of the composites was investigated.

New Progress In Studies Of Lithium Nickel Oxide As Positive Electrode Materials Of Lithium Ion Batteris, Han-San Liu, Yong Yang, Zhong-Ru Zhang, Zu-Geng Lin

Journal of Electrochemistry

Lithium nickel oxide as the positive electrode of lithium ion batteries has aroused more and more interests.This paper reviews the recent reserches on synthesis and element_substitution of LiNiO 2 cathode material,and summarizes the intrinsical relationship between properties and sturcture of the material.The developments of new synthesis methods and mutil_substitution of the material are expecting to be studied in the future research.