Analytical Chemistry Commons^™

Transient Electrochemical Surface-Enhanced Raman Spectroscopic Study In Electrochemical Reduction Of P-Nitrothiophenol, Yun Ling, Jing Tang, Guo-Kun Liu, Cheng Zong

Journal of Electrochemistry

P-nitrothiophenol (PNTP) is one of the most common probe molecules studied by surface-enhanced Raman spectroscopy (SERS). The research in electrochemical reduction behavior of PNTP will help understanding the mechanism for the nitrobenzene reduction. In this paper, we used transient electrochemical surface-enhanced Raman spectroscopy (TEC-SERS) to study the SERS of PNTP with cyclic voltammetry and chronoamperometry on gold electrodes. The results show that the TEC-SERS provide a time resolution that equals the transient electrochemical methods, and we concluded that the reaction was so quick that we did not observe the spectral information of intermediate species described in the literatures with a …

Quantitative Detection Of Levofloxacin Hydrochloride By Differential Pulse Stripping Voltammetry With Electrodeposited Bismuth Film Electrodes, Zi-Ying Guo, Zuo-Peng Li, Jiang Li, Jian-Guo Zhao, Feng Feng

Journal of Electrochemistry

In this study, differential pulse stripping voltammetry was developed for the quantitative detection of levofloxacin hydrochloride indirectly. Levofloxacin hydrochloride contains organic amine, which can be precipitated upon interaction with Zn(SCN)₄^2-. By means of differential pulse stripping voltammetry, the concentration of Zn²⁺ can be determined using an in-situ formed bismuth film electrode, which allows determining indirectly the amount of levofloxacine hydrochloride. The linearity equation, I = 1.1401c - 0.5309 with the correlative coefficient R = 0.9979, was presented in the experiment. The results showed that this approach is very sensitive, having a limitation of detection of 3.18 …

Electrochemical Sensor Based On Magnetic Electrode Modified With Magnetic Molecularly Imprinted Nanoparticles Immobilized Hemoglobin For Determination Of Hydrogen Peroxide, Yang Yuan, Jia-Xin Wang, Yu-Hua Cao

Journal of Electrochemistry

In this work, the surface-imprinted technique was used to prepare magnetic hemoglobin (Hb) imprinted nanoparticles, using Fe₃O₄@SiO₂ NPs as the carrier, Hb as the template molecule, and tetraethyl orthosilicate (TEOS) as the imprinted polymer monomer. The nanoparticles had a core-shell structure, with magnetic Fe₃O₄ NPs as the core and Hb imprinted polymers as the shell. Therefore, Hb could be concentrated and fixed on the surface of the magnetic imprinted nanoparticles (MMIPs NPs). Furthermore, MMIPs NPs were immobilized with chitosan (CS) on the surface of a magnetic electrode to constitute Hb enzyme-like biosensor …

An Aptasensor Based On Aunps/Pani/Tnts Nanocomposite For Electrochemical Detection Of Tobramycin, Yong-Ling Nong, Ni-Na Qiao, Ying Liang

Journal of Electrochemistry

A novel well-constructed electrochemical aptamer-based sensor for the detection of tobramycin was presented, using differential pulse voltammetry (DPV) as a detection technique and methylene blue（MB） as an electrochemical indicator. A glassy carbon electrode modified with a nanocomposite of Au nanoparticles/polyaniline/titania nanotubes (AuNPs/PANI/TNTs) was constructed as the electrode scaffold. The nanocomposite was characterized by transmission electron microscopy and X-ray photoelectron spectroscopy in detail. The results of cyclic voltammetry and electrochemical impedance measurements demonstrated that the AuNPs/PANI/TNTs nanocomposites can improve greatly the electron transfer on the interface. For the detection of tobramycin, the DPV results showed a linear relationship between the current …

Hypervalent Iodine Compounds With Carboxylate And Tetrazolate Ligands, Avichal Vaish

Chemistry Theses and Dissertations

In modern organic chemistry, hypervalent (HV) iodine(III) compounds are frequently used as oxidizing agents but application of λ³-iodanes in polymer and material chemistry is still underexplored. This dissertation describes the preparation of dynamic and self-healing materials by employing ligand exchange reactions involving HV iodine(III) compounds of the type ArIL₂ (Ar = Aryl, L = ligand, e.g., carboxylate or (pseudo)halide). These compounds can undergo ligand exchange reactions in presence of nucleophiles (Nu^-) to form ArINu₂. Diacetoxyiodo benzene was successfully employed as a crosslinker to prepare dynamic and self-healing gels derived from carboxylate-containing polymers. Furthermore, …

Understanding And Controlling Lithium Microstructure During Electroplating For Energy Applications, Yang Tian

Graduate Theses and Dissertations

Lithium-ion batteries are reaching the specific theoretical capacity limit, while lithium metal batteries are regarded as the ideal energy storage system for the next generation “beyond lithium-ion” battery systems. The lithium metal anode is considered as the “Holy grail” of anodes due to its relatively low electrochemical potential (-3.04 V vs SHE) and high theoretical capacity (3860 mAh g-1). However, the application of lithium metal anodes is hindered because of significant reaction between metallic lithium and electrolytes, as well as uneven electro-plating, which leads to dendrite formation, causing safety problems.

The kinetic parameters of Li ions such as diffusion coefficient …

Protein Detection And Structural Characterization By Mass Spectrometry Using Supramolecular Assemblies And Small Molecules, Bo Zhao

Doctoral Dissertations

Mass spectrometry (MS) has played an increasingly prominent role in proteomics and structure biology because it shows superior capabilities in identification, quantification and structural characterization of proteins. To realize its full potential in protein analysis, significant progress has been made in developing innovative techniques and reagents that can couple to MS detection. This dissertation demonstrates the use of polymeric supramolecular assemblies for enhanced protein detection in complex biological mixtures by MS. An amphiphilic random co-polymer scaffold is developed to form functional supramolecular assemblies for protein/ peptide enrichment. The influences of charge density and functional group pK_a on host-guest interactions …

Methodologies For Metal Functionalization Of Phosphorus Based Photopolymer Networks, Vanessa Béland

Electronic Thesis and Dissertation Repository

Photopolymer networks with phosphonium cation, alkyl phosphine and olefin functionality were designed, synthesized and functionalized with metals by metathesis, coordination and hydrometallation reactions, respectively. The materials were strategically designed so that the metal functionalization step could be monitored and quantified. In some cases, this involved characterization by IR, NMR, or X-ray spectroscopic techniques, or by comparison to molecular analogues. It was found that by using a bi-functional photopolymer network, the material could be bi-metallized by orthogonal mechanisms. All metallized polymer networks were tested for their suitability as precursors to metal-containing ceramics. The polymers were pyrolyzed, and on analysis it was …

Electrochemical Detection Of 4-Nitrophenol Based On Glassy Carbon Electrode Modified By Tio2Nps/Rgo Composite, Lin-Na Jiu, Yong-Qiang Cheng

Journal of Electrochemistry

4-nitrophenol (4-NP) has become factitious pollution, and presented a serious threat to the nature and human health. It is necessary to develop a convenient and fast detection method. In this work, the glassy carbon electrode modified by titanium dioxide nanoparticles (TiO₂NPs)/reduced graphene oxide (RGO) composite as an electrochemical sensor was studied for the trace detection of 4-NP. The morphology of the composite was characterized by scanning electron microscopy (SEM). The homogeneous mixing of titanium dioxide nanoparticles and reduced graphene oxide increased the specific surface area of the composite, and facilitated the electrochemical reaction of 4-NP. The electrochemical characteristics …

Synthesis And Characterization Of Heteronuclear Inorganic Complexes For The Photodegradation Of Persistant Organic Pollutants, Matthew A. Moyet

Electronic Theses and Dissertations

The focus of this thesis is to investigate the structural modification and characterization potential of common photocatalysts that have various uses for environmental remediation purposes. Pollution involving organic chemicals is one of the most common scenarios found in communities throughout the country. Efforts to rid contaminated drinking water supplies of these chemicals include physical and chemical filters, which have limited ability and efficacy. This lack of efficient filtration services has led to an increased demand for more effective treatment methods. Chemical species that react in the presence of light are known as photocatalysts and have been used in previous studies …

Electropolymerization And Characterization Of Thin Film Dielectrics, Christopher White Ii

Department of Chemistry: Dissertations, Theses, and Student Research

Graphene is a two-dimensional allotrope of carbon, with several superlative properties, including high electron and hole conductivities, high tensile strength, and chemical robustness. Its chemical and physical properties make it attractive for in use in a myriad of applications, including transistors. However, graphene’s chemical inertness and its physical and electrical properties’ dependency on its conjugated structure make building composite materials with graphene difficult. In 2015, Lipatov, et. al. demonstrated that a film derived from electropolymerized phenol could be used as a dielectric layer on transistor devices fabricated from exfoliated graphene. This thesis extends that research, detailing experiments of phenol and …

Electrochemical Biosensors For Wastewater-Based Epidemiology, Yu-Wei Pan, Kang Mao, Franziska Tuerk, Zhu-Gen Yang

Journal of Electrochemistry

Wastewater-based epidemiology (WBE) has been shown to be an innovative approach for evaluation of drug use trends and public health assessment by quantifying drug residues and/or metabolites (so-called biomarkers) in wastewater collected in a local treatment plant. Community sewage sensors have been proposed and demonstrated to be powerful tools for the analysis of sewage biomarkers. In particular, electrochemical biosensors have emerged as a rapid method for the analysis of biomarkers and pathogens in wastewater due to low cost, minimal sample processing and the ability to test in the field. It has been widely used for biomedical diagnosis, environmental monitoring and …

Single Particle Impact Electrochemistry: Analyses Of Nanoparticles And Biomolecules, Jian-Hua Zhang, Yi-Ge Zhou

Journal of Electrochemistry

Single particle impact electrochemistry (SPIEC) has grown rapidly in recent years and shown great promise in the analysis of nanoparticle properties as well as the detection of biomolecules including DNA, RNA, protein, enzyme, bacteria, virus, vesicles and others. This minireview summarizes recent advances in electroanalytical applications of SPIEC according to different analytical methods, i.e., direct electrolysis of nanoparticles or labeled nanoparticles, direct electrolysis of soft particles encapsulated redox molecule, indirect electrochemistry of particles, area and diffusion blocking, and changes in current magnitude and collision frequency.

Recent Advances In Nanofluidic Electrochemistry For Biochemical Analysis, Zhong-Qiu Li, Zeng-Qiang Wu, Xing-Hua Xia

Journal of Electrochemistry

Nanofluidics, as a young research field, has been receiving more and more attentions. It has been successfully applied in various fields including nanoscale separation, biochemical sensing and energy conversion. The development of nanofluidics is closely related to electrochemistry that can provide a driving force for the study of the material transport characteristics in nanopores/nanochannels. On the other hand, nanopores/nanochannels can creat a microenvironment for study of spatially nanoconfined electrochemistry. The combination of nanofluidics and electrochemistry has given rise to many new theories and technologies for single molecule/particle analysis and nanofluid manipulation. Herein, we provide a review of the recent progresses …

Cysteine And Cystamine Co-Self-Assembled Monolayers For In Vivo Detection Of Ascorbic Acid, Yue Zhang, Tao-Tao Feng, Wen-Liang Ji, Mei-Ning Zhang

Journal of Electrochemistry

Self-assembled monolayers (SAMs), which form highly ordered monolayers on the electrode surface through the gold-suffer bond, have attracted much attention in recent years. This stable layer not only can regulate the wettable properties of surface, but also can act as a promoter towards redox-active molecules. Here, we developed a simple and effective method to construct cysteine and cystamine co-self-assembled monolayer on gold microelectrode for in vivo detection of ascorbic acid (AA). The molar ratio at 1:1 of mixed monolayer has been found the optimum to enhance the electron-transfer kinetics of AA oxidation at low potential (ca. 0.10 V), meanwhile, it …

Current Statuses And Challenges Of Wearable, Flexible Electronic Sensors And Energy Storage Devices, Zhong-Qian Song, Fang-Jie Han, Hui-Jun Kong, Jia-Nan Xu, Yu Bao, Dong-Xue Han, Li Niu

Journal of Electrochemistry

With the developments in the internet of things, artificial intelligence and human-computer interaction technology, soft, flexible and wearable electronic devices provide a novel platform for monitoring of the human vital signs, and recognition of human behaviors to connect human being and machine without consciousness. Recent progresses about wearable and flexible electronics that can provide accurate, non-invasive, long-term and continuous monitoring of human vital sings including pulse, temperature, skin activities, breathing and heart rate are summarized. The working mechanisms, current statuses and challenges in temperature sensor, strain sensor and pressure sensor are discussed. The review concludes with a prospect of current …

Study On The Relationship Between Structure Of Supramolecular Ion Material And Performance Of Humidity Sensing, Hui-Min Tang, Hai-Long Yan, Li Zhang, Jun-Jie Fei, Ping Yu, Lan-Qun Mao

Journal of Electrochemistry

Humidity measurement and control is one of the most notable issues in various areas, such as climate, industry,
agriculture, electronics, especially human comfort and health. In our previous study, we have found that a new kind of supramolecular
ionic material (SIM), consisting of an imidazolium-based dication (e.g., 1,10-bis(3-methylimidazolium-1-yl) decane, C₁₀(mim)₂) and
electroactive dianionic (e.g., 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid), ABTS), shows ultrasensitive and ultrafast
response towards humidity sensing. Herein we prepared six kinds of imidazolium-based dications with different carbon chain
lengths (i.e., C₄, C₆, C₈, C₁₀, C₁₂, C …

A Low Noise Temperature Control System For Nanopore-Based Single Molecule Analysis, Cheng-Yu Yang, Zhen Gu, Zheng-Li Hu, Yi-Lun Ying, Yi-Tao Long

Journal of Electrochemistry

Nanopore employs a single bio-molecule interface, which is a highly sensitive single-molecule detection technology for measuring single biomolecules such as DNA, RNA, protein, and peptide. The interaction between single molecule and nanopore is thermodynamically controlled. Therefore, it is urgent to precisely control the temperature of the nanopore system without introduction of any noise. In this paper, we have developed a low-noise temperature control system for single-molecule detection of nanopores to achieve precise regulation at the ambient temperature during measurements. The system utilizes the thermoelectric effect of the semiconductor refrigerating chip to heat or cool the detection chamber, while adopts electromagnetically …

Approaches For Sample Characterization And Lithography With Nanoparticles Using Modes Of Scanning Probe Microscopy, Jayne C. Garno, Temitope O. Jegede, Kathryn B. Mckee, Melissia Porter, Autumn E. Webb, Jin Gyun Lee, Neepa Mk Kuruppu Arachchige, Justin R. Ragains, Noémie Elgrishi

Faculty Publications

Measurement and imaging modes of scanning probe microscopy (SPM) have been routinely applied for characterizing systems of nanoparticles; however the evolution of fabrication methods to prepare arrangements of nanoparticles remains a challenge. Reproducible fabrication of surface structures which integrate nanoparticles within ultra-small patterns will require innovative approaches to achieve high throughput and precision. Strategies for nanoscale lithography have been introduced for preparing defined arrangements of nanoparticles on surfaces based on physical or chemical interactions. For example, physisorption was employed for attaching nanoparticles based on colloidal lithography and site-directed assembly. Microfabricated atomic force microscope (AFM) tips with capillary channels have been …

Monolayer Triphosphates Mp3 (M = Sn, Ge) With Excellent Basal Catalytic Activity For Hydrogen Evolution Reaction, Hong-Hui Wu, He Huang, Jie Zhong, Song Yu, Qiaobao Zhang, Xiao Cheng Zeng

Xiao Cheng Zeng Publications

Atomically thin two-dimensional (2D) materials have received intense research interest due to their novel properties and promising applications in nanodevices. By using density functional theory (DFT) calculations, we investigate catalytic activities of several newly predicted two-dimensional (2D) triphosphides GeP₃, SnP₃ and InP₃ monolayers for hydrogen evolution reaction (HER). The calculation results show that GeP₃ and SnP₃ monolayers are active catalysts for HER with suitable free energy of hydrogen adsorption in the basal plane. In particular, the Gibbs free energy of hydrogen adsorption (ΔG_H*) of GeP₃ is 0.024 eV, a value even …

Photo-Physical Properties Of Novel Gumbos For Optoelectronic Applications, Thenahandi Prasanthi Deepthika De Silva

LSU Doctoral Dissertations

Organic Light Emitting Diodes (OLEDs) are predicted to revolutionize next generation consumer electronics by offering many advantageous device characteristics, including low power consumption, low heat dissipation, a tunable and wider color gamut, high resolution and contrast, light weight, flexibility, and semi-transparency. However, a major limiting factor for OLEDs to reach their full potential is that only a few known blue OLED emitters with substantial spectral purity and longevity are available to date. Therefore, focus of this research is on understanding and addressing limitations of OLED emitters, with an emphasis on improving the characteristics of blue emitters.

The work presented in …

Preparation And Characterization Of Ruthenium-Gold Raman-Active Catalytic Surfaces, Thang Nguyen

Student Scholar Symposium Abstracts and Posters

Heterogeneous reactions at the gas-solid interface play a major role in many important industrial and environmental processes. These reactions typically rely on metal surfaces, to act as a catalyst between gas phase reactants and products. The catalysts lower the transition state barrier in the formation of the products. The mechanisms of reactions on catalysts is often not fully known due to the difficulty of observing the bond breakage and formation between gaseous molecules at the interface. One method in which the catalytic mechanism can be studied is by using Raman Spectroscopy. However, one drawback of this method is the fact …

Raman And Surface Enhanced Raman Spectroscopy For Forensic Analysis: Case Studies On The Identification Of Illicit Substances And Artist Pigments, Abed Haddad

Dissertations, Theses, and Capstone Projects

Raman spectroscopy is an effective tool for detecting trace amounts of material by fingerprint-like vibrational spectra. At times, the weak intensity of Raman scattering can make it difficult to distinguish trace materials. This shortcoming is addressed by surface‐enhanced Raman spectroscopy (SERS), which produces strong signal enhancements when target compounds are near metal nanoparticles. For the first part of this thesis, the identification of fentanyl and carfentanil, main culprits in the opioid epidemic, was done using normal Raman and the SERS spectroscopy. As an aid in the assignment of the spectral lines, a computational model was built using Density Functional Theory …

Development Of Granulated Adsorbent For Clean-Up Of Water Contaminated By Cesium, Esther Alorkpa

Electronic Theses and Dissertations

A study was conducted on sol-gel synthesis of an adsorbent (phosphotungstic acid embedded in silica gel, H-PTA/SiO­₂) of radioactive cesium. A novelty of this work is covalent bonding of PTA to the surface of solid support that prevents leaching from the surface of the material. The sample was granulated with a binder, aluminium oxide (γ-Al₂O₃). Solid-state NMR and FT-IR spectroscopy were used to confirm the presence of Keggin units of PTA in the bound materials. Thermal analysis of H-PTA/SiO­₂ - γ-Al₂O₃ (50 %) showed that the water content in the …

Advanced Electrochemical Strategy For In Vivo Detection Of Electrochemically Inactive Molecules, Zhou Qi, Zhang Li-Min, Tian Yang

Journal of Electrochemistry

Development of efficient electrochemical strategies for in vivo analysis of electrochemically inactive molecules in brain is significant for understanding and studying their molecular mechanism and roles playing in brain and brain diseases. This review gives a brief introduction on the advanced in vivo electrochemical sensor for detection of non-redox active molecules from three aspects: 1) The selection and design of specific molecules are highly desirable to develop electrochemical sensors with high selectivity for measuring electrochemical inactive molecules through converting specific chemical reaction involved by target to electric signal; 2) The analysis based on ion current rectification occurred at spatial confined …

Recent Progress Of Electrochemiluminescence Sensors Based On Electrically Heated Electrode, Hui-Fang Zhang, Yi-Ting Chen, Fang Luo, Zhen-Yu Lin, Guo-Nan Chen

Journal of Electrochemistry

Electrochemiluminescence (ECL) has broad application in the fields of environmental monitoring and biological analysis due to its intrinsic advantages such as excellent versatility, good detection sensitivity, and high specificity. The intensity of ECL can be influenced by temperature variation in the ECL quantum efficiency and the rate of electrochemical reaction. However, traditional temperature control is commonly realized through bulk solutions heating, which is complicated and unfavorable for detection when the volatile and thermally unstable materials existed. In order to address these problems, electrically heated electrodes are used to adjust the temperature desired. The major character of this technique lies in …

Sensitive And Reusable Electrogenerated Chemiluminescence Aptasensor Fabricated By Electrochemically Double Covalent Coupling Method For The Detection Of Cocaine, Xiao-Feia Wang, Tinga Zhang, Bing Wang, Hong-Lan Qi, Cheng-Xiao Zhang

Journal of Electrochemistry

A double covalent coupling method based on click chemistry and diazonium chemistry was developed for the fabrication of a sensitive and reusable electrogenerated chemiluminescence (ECL) aptasensor. As a proof-of-concept, cocaine was chosen as a model target, and a specific aptamer was chosen as a recognition molecule element, while ruthenium complex derivative (Ru1) as an ECL signal compound. The ECL aptasensor was fabricated by electrochemically diazotizing a phenylazide on the surface of a glassy carbon electrode, and then, coupling the alkyne functionalized Ru1-labeled cocaine aptamer through click chemistry. The ECL aptasensor was facilely used to determine cocaine in the range from …

Electrochemical Analysis And Sensing Preface, Yi-Tao Long, Yang Tian

Journal of Electrochemistry

No abstract provided.

Graphene-Like Secondary-Laser-Etched Polyimide Film Decorated With CuXO Nanocomposites: A Novel Electrode Substrate For Non-Enzymatic Glucose Sensors, Wan-Lin Dai, Zhi-Wei Lu, Jian-Shan Ye

Journal of Electrochemistry

In this work, a novel electrode substrate with graphene-like surface and Cu_xO nanocomposites derived from secondary-laser-etched polyimide (SLEPI) film was synthesized and applied in non-enzymatic glucose detection for the first time. Characterizations indicate that the as-prepared SLEPI/Cu_xO film electrode (SLEPI/Cu_xO-FE) possessed huge surface area, plentiful active sites and excellent electrocatalytic performance. The obtained sensor exhibited the high sensitivity and selectivity for glucose determination with a linear range of 0.05 mmol·L^-1 to 3 mmol·L^-1 and a detection limit of 1.72 μmol·L^-1 (S/N=3), which provides a simple, flexible and low-cost electrochemical sensor for …

High-Efficiency Nitrite Sensor Based On Cop Nanowire Array, Fu-Ling Zhou, Xiao-Li Xiong, Xu-Ping Sun

Journal of Electrochemistry

Nitrite has a negative impact on the environment and human health. The long-term consumption of nitrite-containing foods has a carcinogenic risk. Therefore, the analysis and detection of nitrite are important. It is of great significance to develop high-efficiency electrocatalysts to achieve high sensitivity and selectivity for nitrite detection. The cobalt phosphide nano-array (CoP/TM) was obtained by hydrothermal and low-temperature phosphating. The electrochemical test results show that the constructed CoP/TM was a highly efficient electrochemical reduction nitrite catalyst with the excellent sensing performance and response time less than 3 s, as well as the linear detection range of 1.0 μmol·L^{-1 …}