Physical Sciences and Mathematics Commons^™

Ultramicroelectrode Experiments: Principles, Fabrications And Voltmmetric Behaviors, Zhen Ma, Jia-Yang Lin, Wen-Jing Nan, Lian-Huan Han, Dong-Ping Zhan

Journal of Electrochemistry

Due to the small size at least in one dimension (< 25 μm), ultramicroelectrode (UME) has small electric-double-layer capacitance, low IR drop, rapid mass transfer rate, fast response, high signal/noise ratio and high spatiotenporal resolution. UME is qualified not only to study the kinetics of fast electrode processes, but also to act as the probe of scanning electrochemical microscopies to obtain the localized chemical or electrochemical reactivity of the substrates. Thus, UMEs play a significant role in various research domains of electrochemistry, and have become an important electrochemical experimental method. Herein, we will introduce the basic principles, a simple fabrication method and voltammetric experimental protocols of UME, providing a guide to carry out the UME experiments.

Band Alignments Of Metal/Oxides-Water Interfaces Using Ab Initio Molecular Dynamics, Yong-Bin Zhuang, Jun Cheng

Journal of Electrochemistry

Band alignments of electrode-water interfaces are of crucial importance for understanding electrochemical interfaces. In the scenario of electrocatalysis, applied potentials are equivalent to the Fermi levels of metals in the electrochemical cells; in the scenario of photo(electro)catalysis, semiconducting oxides under illumination have chemical reactivities toward redox reactions if the redox potentials of the reactions straddle the conduction band minimums (CBMs) or valence band maximums (VBMs) of the oxides. Computational band alignments allow us to obtain the Fermi level of metals, as well as the CBM and VBM of semiconducting oxides with respect to reference electrodes. In this tutorial, we describe …

62nd Annual Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 62nd annual meeting of the Rocky Mountain Conference on Magnetic Resonance, co-endorsed by the Colorado Section of the American Chemical Society and the Society for Applied Spectroscopy. Held in Sonesta Denver Downtown, Denver, Colorado, July 23-27, 2023.

Exfoliation And Spray Deposition Of Graphene Nanoplatelets In Ethyl Acetate And Acetone: Implications For Additive Manufacturing Of Low-Cost Electrodes And Heat Sinks, Muhammed Ramazan Oduncu, Zhifan Ke, Bingyuan Zhao, Zhongxia Shang, Robin Simpson, Haiyan Wang, Alexander Wei

Department of Chemistry Faculty Publications

Nonaqueous dispersions of graphene nanoplatelets (GrNPs) can be used to prepare thin films and coatings free of surfactants, but typically involve polar organic solvents with high boiling points and low exposure limits. Here, we describe the mechanochemical exfoliation and dispersion of GrNPs in volatile aprotic solvents such as ethyl acetate (EtOAc) and acetone, which rank favorably in green solvent selection guides. GrNPs in powder form were exfoliated with a solvent on a horizontal ball mill for 48 h and then sonicated at moderate power to produce suspensions in excess of 300 μg/mL with minimum loss of dispersion stability over 7 …

The Effect Of Heat Treatment And Chemical Treatment On Natural Fibre To The Durability Of Wood Plastic Composites – A Review, Nuratiqah Asyiqin Mohd Nasharudin, Nur Fatihah Sulaiman, Nurul Aziemah Mohammad, Wan Nor Raihan Wan Jaafar, Falah Abu Dr., Siti Norasmah Surip

Journal of Materials Exploration and Findings

The application of WPC is not only limited to indoor applications but has been extended to exterior applications where properties of WPC could compromise during service life. WPC was derived from wood fiber of various sizes to reinforce polymers. Wood fiber has the advantage of a cheaper price, being abundantly available, and ease of processing, however, the critical factor is its hydrophilic nature, where moisture absorption is likely to occur. Thus, treatments for reducing the hydrophilicity of wood fibers are applied. By treatment of wood fiber, the surface impurities were removed, leaving the roughened surface of fibers, thus providing a …

Intrinsic Point Defects (Vacancies And Antisites) In Cdgep2 Crystals, Timothy D. Gustafson, Nancy C. Giles, Peter G. Schunemann, Kevin T. Zawilski, Kent L. Averett, Jonathan E. Slagle, Larry E. Halliburton

Faculty Publications

Cadmium germanium diphosphide (CdGeP₂) crystals, with versatile terahertz-generating properties, belong to the chalcopyrite family of nonlinear optical materials. Other widely investigated members of this family are ZnGeP₂ and CdSiP₂. The room-temperature absorption edge of CdGeP₂ is near 1.72 eV (720 nm). Cadmium vacancies, phosphorous vacancies, and germanium-on-cadmium antisites are present in as-grown CdGeP₂ crystals. These unintentional intrinsic point defects are best studied below room temperature with electron paramagnetic resonance (EPR) and optical absorption. Prior to exposure to light, the defects are in charge states that have no unpaired spins. Illuminating a CdGeP_{2 …}

An Aptamer-Based Microelectrode With Tunable Linear Range For Monitoring Of K+ In The Living Mouse Brain, Yuan-Dong Liu, Jia-Run Li, Li-Min Zhang, Yang Tian

Journal of Electrochemistry

Potassium ion (K⁺) is widely involved in several physiopathological processes, and its abnormal changes are closely related to the occurrence of brain diseases of cerebral ischemia. In vivo acquirement of K⁺ variation is significant to understand the roles of K⁺ playing in brain functions. A microelectrode based on single-stranded DNA aptamers was developed for highly selective detection of K⁺ in brain, in which the aptamer probes were designed to contain an aptamer part for specific recognition of K⁺, an alkynyl group used for stable confinement of aptamer probe on the gold surface, and …

Colorful “Stars” In The Dark, Chao Jing, Yi-Tao Long

Journal of Electrochemistry

Plasmonic nanoparticles such as Au and Ag with localized surface plasmon resonance (LSPR) property exhibit unique scattering and absorption features. The plasmonic scattering and absorption bands are mainly located at visible light region which can be easily applied in visual detections. By modulating the size, shape, and composition of gold and silver colloid solutions, plenty of colorimetric methods have been constructed for the detection of metal ions, biomolecules, and environmental contaminants, etc. For many years, the LSPR-based measurements are implemented in reagent tubes. Since 2000, the plasmon resonance scattering (PRS) light of metal nanoparticles captured by dark-field microscopy enables the …

Scanning Photoelectrochemical Microscopic Study In Photoinduced Electron Transfer Of Supramolecular Sensitizers-Tio2 Thin Films Systems, Sheng-Ya Zhang, Min Yao, Ze Wang, Tian-Jiao Liu, Rong-Fang Zhan, Hui-Qin Ye, Yan-Jun Feng, Xiao-Quan Lu

Journal of Electrochemistry

Crafting charge transfer channels at titanium dioxide (TiO₂) based photoanodes remain a pressing bottleneck in solar-to-chemical conversion technology. Despite the tremendous attempts, TiO₂ as the promising photoanode material still suffers from sluggish charge transport kinetics. Herein, we propose an assembly strategy that involves the axial coordination grafting metalloporphyrin-based photosensitizer molecules (MP) onto the surface-modified TiO₂ nanorods (NRs) photoanode, forming the composite MP/TiO₂ NRs photoelectrode. As expected, the resulted unique MP_B/TiO₂ NRs photoelectrode displays significantly improved photocurrent density as compared to TiO₂ NRs alone and MP_A/TiO₂ NRs photoelectrode. Scanning …

Influence Of Substitutions On The Structure, Ionic Conductivity, And Phase Transitions In The System Of Na3fe2(1-X)Sc2x(Po4)3 (0≤X≤0.06) Solid Solutions, A.S. Nogai, A.A. Nogai, E.A. Nogai, A.A. Bush, D.E. Uskenbaev

Eurasian Journal of Physics and Functional Materials

The article presents data on the study of the effect of substitutions of M-cations in the system of Na₃Fe_2(1-x)Sc_2x(PO₄)₃ solid solutions (in the concentration range 0≤x≤0.06) on the crystal structure, ionic conductivity, and also on the temperature of phase transitions T_a→b, T_b→g. It is shown that samples of Na₃Fe_2(1-x)Sc_2x(PO₄)₃ (0≤x≤0.06) solid solutions are monoclinically distorted, and the structure parameters increase linearly with increasing dopant concentration. Moreover, in the studied samples of solid solutions, an increase in the conductivity …

Non-Destructive Structural Studies Of Ceramic Fragments Of Ancient Tribes Of Kazakhstan, A.Zh. Zhomartova, B.A. Bakirov, S.E. Kichanov, R.S. Zhumatayev, A.T. Toleubayev, S. Shakenov, D.P. Kozlenko

Eurasian Journal of Physics and Functional Materials

The phase composition of several fragments of the ancient ceramic of the early medieval settlement of Asusay and burial ground Eleke Sazy in the modern Republic of Kazakhstan has been studied using neutron diffraction and Raman spectroscopy. The quartz, calcite, and feldspar minerals are dominant phases in the studied ceramic fragments. The fractions of those phases were obtained. The spatial arrangement of inner components inside volumes of fragments was determined using neutron tomography. The pores in the ceramic fragments were segmented, and the porosity for each sample was obtained. The phase composition and internal pores are discussed within the framework …

Research On Ferroelectric-Piezoelectric Properties And Relaxor Phase Transition Characteristics Of Pslzt-Bmt Ceramics, N.V. Thinh, L.D. Vuong, D.V. On, T.V. Chuong, L.V. Truong Son, T.N. Dat, L.V. Thanh Son, V.T. Tung

Eurasian Journal of Physics and Functional Materials

(1-x)[(Pb_0.94Sr_0.05La_0.01)(Zr_0.54Ti_0.46)_0.9975O₃]-x[Bi(Mn _1/2 Ti_1/2 )O₃] ceramics with x in the range of 0–0.05 mol were successfully synthesized following the conventional solid-phase route. The materials were thoroughly investigated to study their structural phase, microstructure, ferro-piezoelectric characteristics, and dielectric behavior. The addition of BMT to PSLZT contributed to the transition of the tetragonal phase to the rhombohedral phase and an increase in the mechanical quality coefficient Qm of the material. The value of the electromechanical coupling coefficient k_p =0.66, the value of k_t=0.53, …

Electron-Hole Trapping Centers In Alkali Metal Sulfates With Dy3+ Impurities, T.N. Nurakhmetov, T.T. Alibay, R.Z. Bakhtizin, S. Pazylbek, A.Zh. Kainarbay, A.M. Zhunusbekov, B.M. Sadykova, D.A. Tolekov, R.K. Shamieva, A.S. Nurpeissov

Eurasian Journal of Physics and Functional Materials

The Na₂SO₄ − Dy samples were obtained by slow evaporation method. The spectroscopic methods were used to study the mechanisms of formation of electron and hole trapping centers. Intrinsic recombination emission of 2.9–3.1 eV and impurity emission of 2.55 eV and 2.15 eV are excited at 4.0–4.5 eV. Intrinsic SO³⁻₄− SO⁻₄ and impurity Dy²⁺−SO⁻₄ trapping centers were revealed. The local levels corresponding between the electron and hole trapping center are 4.0–4.5 eV.

Influence Of Surfactants On The Formation And Growth Of Cadmium Telluride Nanoplatelets, A.S. Akhmetova, A.K. Ospanova, B.N. Yussupbekova, T.T. Alibay

Eurasian Journal of Physics and Functional Materials

The article presents a comprehensive review of the current research on the use of surfactants in CdTe nanoplatelet synthesis, including a discussion of the various types of surfactants that have been used and their effects on nanoplatelet size, shape, and optical properties. Additionally, the article examines the mechanisms by which surfactants influence the growth and morphology of CdTe nanoplatelets, with a focus on the role of surfactant, size, and structure. Overall, this article provides a detailed analysis of the use of surfactants in the synthesis of CdTe nanoplatelets and highlights the potential for this approach to improve the performance of …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Covalent Adaptable Networks For Wood Coatings, Jachin Boaz Clarke

Materials Engineering

Wood swells and shrinks causing problems with seasonal humidity. Applying thick coatings of reactive finishes based on cross-linked polyurethane, epoxy, or polyesters can slow moisture-vapor exchange. However, the use of thick coatings leads to cracking and crazing sooner than thin finishes. This research proposes the addition of 3.3 mol % triazabicyclodecene, a conventionally used covalent adaptable network catalyst, in a commercially available polyester-based wood coating. The self-healing of the wood coating is tested using DMA stress relaxation and compression molding. The result from DMA renders inconclusive and compression molding indicates the novel wood coating oxidizes at elevated temperatures. The wood …

Thermal, Magnetic, And Electrical Properties Of Thin Films And Nanostructures: From Magnetic Insulators To Organic Thermoelectrics, Michael J. M. Roos

Electronic Theses and Dissertations

Modern fabrication and growth techniques allow for the development of increasingly smaller and more complex solid state structures, the characterization of which require highly specialized measurement platforms. In this dissertation I present the development of techniques and instrumentation used in magnetic, thermal, and electrical property measurements of thin films and nanostructures. The understanding of trapped-flux induced artifacts in SQUID magnetometry of large paramagnetic substrates allows for the resolution of increasingly small moments. Using these methods, the antiferromagnetic coupling of the interface between a Y₃Fe₅O₁₂ film and Gd₃Ga₅O₁₂substrate is quantitatively …

Exploring The Potential Of Pavegen’S Kinetic Energy Generating Floor For Sustainable Energy Solutions: A Proposal For Cal Poly Slo, Brandon J. Cuneo

Construction Management

This paper proposes the installation of Pavegen's kinetic energy generating floors at Cal Poly’s campus as a sustainable energy solution. Pavegen has developed a pioneering technology that converts footsteps into clean and renewable energy. The versatility of these floors is demonstrated through successful implementations in various settings, such as transportation hubs and public spaces, generating power from foot traffic. Collaborations with Schneider Electric, installation at Dupont Circle, and integration at Heathrow Airport showcase the potential for sustainable urban infrastructure. This paper outlines research conducted on Pavegen and similar solutions, including communication with company representatives and examining proposed installation locations at …

Fe Nanoparticles Encapsulated In N-Doped Porous Carbon For Efficient Oxygen Reduction In Alkaline Media, Chun-Yan Li, Rui Zhang, Xiao-Jie Ba, Xiao-Le Jiang, Yao-Yue Yang

Journal of Electrochemistry

Rational design and synthesis of non-precious-metal catalyst plays an important role in improving the activity and stability for oxygen reduction reaction (ORR) but remains a major challenge. In this work, we used a facile approach to synthesize iron nanoparticles encapsulated in nitrogen-doped porous carbon materials (Fe@N-C) from functionalized metal-organic frameworks (MOFs, MET-6). Embedding Fe nanoparticles into the carbon skeleton increases the graphitization degree and the proportion of graphitic N as well as promotes the formation of mesopores in the catalyst. The Fe@N-C-30 catalyst showed the excellent ORR activity in alkaline solutions (E₀ = 0.97 V vs. RHE, E_{1/2 …}

Deep Euteceic Solvents-Assisted Synthesis Of Novel Network Nanostructures For Accelerating Formic Acid Electrooxidation, Jun-Ming Zhang, Xiao-Jie Zhang, Yao Chen, Ying-Jian Fan, You-Jun Fan, Jian-Feng Jia

Journal of Electrochemistry

Deep eutectic solvents (DESs) have been reported as a type of solvent for the controllable synthesis of metal nanostructures. Interestingly, flower-like palladium (Pd) nanoparticles composed of staggered nanosheets and nanospheres are spontaneously transformed into three-dimensional (3D) network nanostructures in choline chloride-urea DESs using ascorbic acid as a reducing agent. Systematic studies have been carried out to explore the formation mechanism, in which DESs itself acts as a solvent and soft template for the formation of 3D flower-like network nanostructures (FNNs). The amounts of hexadecyl trimethyl ammonium bromide and sodium hydroxide also play a crucial role in the anisotropic growth and …

P-Doped Ru-Pt Alloy Catalyst Toward High Performance Alkaline Hydrogen Evolution Reaction, Rong-Qin Huang, Wei-Ping Liao, Meng-Xuan Yan, Shi Liu, Yuan-Ming Li, Xiong-Wu Kang

Journal of Electrochemistry

Electrocatalytic water splitting represents grand promise for hydrogen fuel in modern energy equipment, and the design and fabrication of higher performance catalysts are at the central. Herein, we report the sequential phosphorus (P)-doping into ruthenium (Ru) nanoparticles (Ru-P/C) by thermal annealing of Ru nanoparticles in phosphine (PH₃) atmosphere and deposition of extremely low concentration of platinum (Pt) to obtain P-doped Ru-Pt alloy catalyst supported on carbon nanotubes (CNTs), which is denoted as (Ru-P)#Pt/C. The data by X-ray diffraction spectroscopy and transmission electron microscopy show that the Ru nanoparticles existed in the form of hexagonal close-packed (hcp) phase with …

Effective Nanomembranes From Chitosan/Pva Blend Decorated Graphene Oxide With Gum Rosin And Silver Nanoparticles For Removal Of Heavy Metals And Microbes From Water Resources, Mohamed Morsy

Nanotechnology Research Centre

No abstract provided.

Method Of Evanescently Coupling Whispering Gallery Mode Optical Resonators Using Liquids, Hengky Chandrahalim, Kyle T. Bodily

AFIT Patents

The present invention relates to evanescently coupling whispering gallery mode optical resonators having a liquid coupling as well as methods of making and using same. The aforementioned evanescently coupling whispering gallery mode optical resonators having a liquid couplings provide increased tunability and sensing selectivity over current same. The aforementioned. Applicants’ method of making evanescent-wave coupled optical resonators can be achieved while having coupling gap dimensions that can be fabricated using standard photolithography. Thus economic, rapid, and mass production of coupled WGM resonators-based lasers, sensors, and signal processors for a broad range of applications can be realized.

Synthesis And Characterization Of Sodium Cathode Materials, He Zhou

McKelvey School of Engineering Theses & Dissertations

As sodium batteries hold great promise as a next-generation energy storage device to replace lithium batteries, the development of sodium battery materials has become increasingly urgent. The current study aims to investigate two potential sodium-ion battery cathode materials, Sodium Vanadium Phosphate, and Sodium Manganese Hexacyanoferrate, optimize the experimental procedures, conduct a systematic analysis of material properties and characterization, and ultimately determine the ideal synthesis conditions for these materials.

In the first part of the study, we focused on optimizing the synthesis of Sodium Vanadium Phosphate. By investigating various synthesis conditions, such as annealing temperature, pressure, ascorbic acid content, and material …

Effects Of Fibril Morphology And Interfacial Interactions On The Behavior Of Polymer-Grafted Cellulose Nanofibril Reinforced Thermoplastic Composites, Peter V. Kelly

Electronic Theses and Dissertations

Mechanically refined cellulose nanofibrils (CNFs) promise to be a high-volume, sustainable, nanoscale reinforcement for thermoplastic composites. They are currently held back by poor interfacial interactions with composite matrices, energy intensive drying, and drying induced fibril aggregation. In this dissertation, we explored how a grafting-through polymerization scheme modified the surface of CNFs with a wide variety of commodity polymers and overcame many of these technical challenges.

The first phase of the research was concerned with characterizing the unique morphology of these CNFs as a function of refinement energy. This characterization was employed to understand how the materials’ morphologies affected their interfacial …

Influence Of Platinum Nanoparticles On Ionic Transport And Hydrogen Reactivity Of Yttria-Stabilized Zirconia Thin Films, Firas Mahyob

Electronic Theses and Dissertations

Yttria-stabilized zirconia (YSZ) is a widely used ceramic material in solid oxide fuel cells, oxygen sensors, and sensing applications due to its high ionic conductivity, chemical inertness, and thermal stability. YSZ is promising active coating for use in miniaturized harsh environment wireless surface acoustic sensors to monitor gases such as H₂. Adding catalytic Pt nanoparticles can enhance gas reactivity and lead to associated film conductivity changes.

In this work, thin films with an (8% Y₂O₃ - 92% ZrO₂) composition were deposited onto piezoelectric langasite substrates using RF magnetron sputtering in Ar:O₂ - …

Utilization Of Cellulose Symbiotic Culture Of Bacteria And Yeast (Scoby) With Sweet Tea Media As Methylene Blue And Brilliant Green Biosorbent Material, Leonard Mateus Sigiro, Ahmad Maksum, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The cellulose from Symbiotic Culture of Bacteria and Yeast (SCOBY) can be used as a biosorbent for dye adsorption, such as Methylene Blue and Brilliant Green. This study used sweet tea with a 6% of sugar concentration and 14 days of fermentation time to synthesize biosorbent material from SCOBY. The results from this synthesis are then characterized using FTIR, SEM, and BET. From the result of characterization, it was found that SCOBY has pores formed from cellulose. The results of the average pore size are 1.5976nm with a pore volume of 0.229cc/g, while the specific surface area is 143.244m2/g. The …

Enhancing Compatibility And Mechanical Properties Of Natural Rubber Composites, Krisma Yessi Sianturi, Adam Febriyanto Nugraha, Belle Kristaura, Mochamad Chalid

Journal of Materials Exploration and Findings

Pure natural rubber (NR) exhibits low mechanical properties, necessitating the incorporation of additives like vulcanizing agents and fillers. Carbon black and silica, conventional fillers, are relatively expensive and not environmentally friendly. This study explores using Oil Palm Empty Fruit Bunch (OPEFB) fiber as an affordable, abundant, and biodegradable alternative filler for NR. However, compatibility issues arise between the nonpolar NR and the polar OPEFB fiber. A latex-starch hybrid coupling agent (CA (NR-St)) was added to the composite formulation to address this. NR, OPEFB fiber, and the coupling agent were mixed using an open roll mill with a 10 phr OPEFB …

Separation Of Organic Acids Through Direct Catalysis From Sugars, Katelyn Robinson

Chemical Engineering Undergraduate Honors Theses

Society relies on plastic products, whether they are single use or durable. A downside of plastic is that the most common type is a product of oil and oil is not only a limited resource but also a climate-damaging resource. Polylactic acid (PLA) is a bio-based, biodegradable plastic. However, the process of converting biomass to polylactic acid polymer has the largest environmental impact of the PLA production process, so alternative methods of conversion are needed (Moretti et al., 2021). The polylactic acid polymer can be made with lactic acid, which can be converted from glucose.

Low-Cost Microstereolithography 3d Printing With Microfluidic Microsampling Applications, Lauren Twombly

Chemistry & Biochemistry Undergraduate Honors Theses

The growing field of stereolithography 3D printing has welcomed a new age ofmicrofluidic device fabrication techniques. When compared to previous planar fabrication techniques such as soft-lithography, stereolithography 3D printing offers highly automated procedures, reduced fabrication times, and greater complexity of device features. To date, the greatest tradeoff for 3D printing in microfluidic device fabrication is poorer resolution when compared to soft-lithography which can produce feature sizes on the nanometer scale. The poorer resolution of 3D printing limits the feasible size of features. While highly sophisticated 3D printers are capable of achieving sub 10 μm resolution, these instruments are incredibly expensive …