Physical Sciences and Mathematics Commons^™

Directional Microwave Emission From Femtosecond-Laser Illuminated Linear Arrays Of Superconducting Rings, Thomas J. Bullard, Kyle Frische, Charlie Ebbing, Stephen J. Hageman, John Morrison, John Bulmer, Enam A. Chowdury, Michael L. Dexter, Timothy J. Haugan, Anil K. Patniak

Faculty Publications

We examine the electromagnetic emission from two photo-illuminated linear arrays composed of inductively charged superconducting ring elements. The arrays are illuminated by an ultrafast infrared laser that triggers microwave broadband emission detected in the 1–26 GHz range. Based on constructive interference from the arrays a narrowing of the forward radiation lobe is observed with increasing element count and frequency demonstrating directed GHz emission. Results suggest that higher frequencies and a larger number of elements are achievable leading to a unique pulsed array emitter concept that can span frequencies from the microwave to the terahertz (THz) regime.

Impact Of Silicon Ion Irradiation On Aluminum Nitride-Transduced Microelectromechanical Resonators, David D. Lynes, Joshua Young, Eric Lang, Hengky Chandrahalim

Faculty Publications

Microelectromechanical systems (MEMS) resonators use is widespread, from electronic filters and oscillators to physical sensors such as accelerometers and gyroscopes. These devices' ubiquity, small size, and low power consumption make them ideal for use in systems such as CubeSats, micro aerial vehicles, autonomous underwater vehicles, and micro-robots operating in radiation environments. Radiation's interaction with materials manifests as atomic displacement and ionization, resulting in mechanical and electronic property changes, photocurrents, and charge buildup. This study examines silicon (Si) ion irradiation's interaction with piezoelectrically transduced MEMS resonators. Furthermore, the effect of adding a dielectric silicon oxide (SiO₂) thin film is …

Hydroxyapatite-Based Coatings On Silicon Wafers And Printed Zirconia, Antoine Chauvin

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Dental surgery needs a naturally attract implant design that can ensure both osseointegration and soft tissue integration. Hydroxyapatite (HAp), the main mineral constituent of dentine and tooth enamel, is commonly used as a coating component, notably for overlaying titanium– or ceramics–based implants. This thesis aims to investigate the behavior of a HAp-based coating, specifically designed to be compatible with a porous substrate. Coating layers are made by sol–gel dip coating by immersion of porous substrates made by additive manufacturing into solutions of HAp, having been mixed with polyethyleneimine (PEI), to improve the adhesion of HAp on the substrate. First, the …

Improving The Structural And Physical Yield Of Aluminum By Repeated Additions Of Iron Carbide, Fayrooz K. Albasri

Al-Bahir Journal for Engineering and Pure Sciences

Aluminum suffers from low hardness and some ductility when thermal sintering which requires reinforcement with carbide or ceramic materials as Iron FeC with volumetric properties (2,4,6,8,10 )%. For purpose of the pressing process after mixing the two powder together, a scanning electron microscope examination performed for the prepared samples and found that there is a surface and structural consistency between aluminum and iron carbide and the best homogeneity is at10 % of carbide. Also some physical tests conducted for prepared samples and the results of the real density showed that the addition of iron carbide increases the density gradually and …

Trumpet Directivity From A Rotating Semicircular Array, Samuel D. Bellows, Joseph E. Avila, Timothy W. Leishman

Directivity

The directivity function of a played musical instrument describes the angular dependence of its acoustic radiation and diffraction about the instrument, musician, and musician’s chair. Directivity influences sound in rehearsal, performance, and recording environments and signals in audio systems. Because high-resolution, spherically comprehensive measurements of played musical instruments have been unavailable in the past, the authors have undertaken research to produce and share such data for studies of musical instruments, simulations of acoustical environments, optimizations of microphone placements, and other applications. The authors acquired the data from repeated chromatic scales produced by a trumpet played at mezzo-forte in an anechoic …

The Role Of Leading-Edge Serrations In Controlling The Flow Over Owls’ Wing, Tanner Saussaman, Asif Nafi, David Charland, Hadar Ben-Gida, Roi Gurka

Physics and Engineering Science

We studied the effects of leading-edge serrations on the flow dynamics developed over an owl wing model. Owls are predatory birds. Most owl species are nocturnal, with some active during the day. The nocturnal ones feature stealth capabilities that are partially attributed to their wing microfeatures. One of these microfeatures is small rigid combs (i.e. serrations) aligned at an angle with respect to the incoming flow located at the wings' leading-edge region of the primaries. These serrations are essentially passive flow control devices that enhance some of the owls' flight characteristics, such as aeroacoustics and, potentially, aerodynamics. We performed a …

Using Powder Metallurgy Process To Produce Ceramic-Metal Composites, Ibrahim F. Abed, Salih, Y. Darweesh

Al-Bahir Journal for Engineering and Pure Sciences

Pressing powders and engineering materials is an innovative method for producing samples with a low cost and multiple industrial applications. In the current article, copper metal was added in different volume ratios to a ceramic material, alumina, for the purpose of improving the properties of alumina, by pressing with a hydraulic press. Where the results of the article showed that the percentage of true porosity after sintering is from (26-13)% with a copper content of (5%) to (25%). As for the apparent porosity after sintering, it decreased from (26-9)% at a copper content of (5-25)%, while the water absorption was …

Ferroelectric Hafnia Surface In Action, Xia Hong

Nebraska Center for Materials and Nanoscience: Faculty Publications

Piezoresponse microscopy and spectroscopy reveal the inextricable role of surface electrochemistry in stabilizing and controlling ferroelectricity in doped hafnia.

Doped hafnia (HfO₂), a relatively new member of the ferroelectric family, has challenged in many ways our conventional perception of ferroelectric oxides. It possesses extremely localized electric dipoles that are independently switchable,¹ making it immune to finite size effects — the loss of long-range dipole order in ferroic materials due to size scaling. While polycrystalline grains and microstructures can yield lower polarization and poorer cycling behavior in canonical ferroelectrics such as Pb(Zr,Ti)O₃ and BaTiO₃, in …

Design And Fabrication Of A Trapped Ion Quantum Computing Testbed, Christopher A. Caron

Masters Theses

Here we present the design, assembly and successful ion trapping of a room-temperature ion trap system with a custom designed and fabricated surface electrode ion trap, which allows for rapid prototyping of novel trap designs such that new chips can be installed and reach UHV in under 2 days. The system has demonstrated success at trapping and maintaining both single ions and cold crystals of ions. We achieve this by fabricating our own custom surface Paul traps in the UMass Amherst cleanroom facilities, which are then argon ion milled, diced, mounted and wire bonded to an interposer which is placed …

Direct Measurement Of The 114cd(N, Gamma)115cd Cross Section In The 1 Ev To 300 Kev Energy Range, Kofi Tutu Addo Assumin-Gyimah

Theses and Dissertations

The large thermal cross section of cadmium makes it ideal for many practical applications where screening of thermal neutrons is desired. For example, in non-destructive assay techniques, or for astrophysical studies of the s-process. All such applications require precise knowledge of the neutron-capture cross section on cadmium. Although there are some data on neutron-capture cross sections particularly at thermal energies and at energies relevant for astrophysics, there is very little data at most other energies. Further, the evaluated cross sections from the ENDF and JENDL databases disagree at high energies. Therefore, there is a critical need for precise knowledge of …

Study Of Microphonic Effects On The C100 Cryomodule For High Energy Electron Beam Accelerators, Caleb James Hull

Mechanical & Aerospace Engineering Theses & Dissertations

The Continuous Electron Beam Accelerator Facility (CEBAF) at Thomas Jefferson National Laboratory (JLab) is a particle accelerator which can accelerate an electron beam to relativistic speeds and apply the beam onto target samples. The C100 superconducting radio frequency (SRF) cavity is the primary accelerating structure of the C100 cryomodule, one of the many cryomodules which compose the CEBAF linear accelerator. SRF cavities are particularly sensitive to internal and external vibrations that can result in a phenomenon called microphonics which degrade the operational stability of a cryomodule.

The purpose of this thesis is to investigate the significance of mechanical disturbances on …

Experimental And Computational Aerodynamic Studies Of Axially-Oriented Low-Fineness-Ratio Cylinders, Forrest Miller

Mechanical & Aerospace Engineering Theses & Dissertations

For the successful completion of atmospheric entry, descent, and landing (EDL) missions, a body geometry must be selected which provides favorable dynamic aerodynamic properties. The types of experimental facilities capable of collecting information on these properties are limited; however, their numbers are growing thanks to the continued work by the aerodynamics community. NASA Langley Research Center (LaRC) is conducting dynamic aerodynamic testing using a subsonic magnetic suspension and balance system (MSBS), with the end goal of implementing a supersonic MSBS facility at NASA Glenn Research Center. MSBSs are also currently used at the Institute of Fluid Science (IFS) at Tohoku …

Finite Element Analysis Of A Coconut (Cocos Nucifera L.) Climbing Mechanism, Arjay O. Afan, Omar F. Zubia, Adrian A. Borja, Ralph Kristoffer B. Gallegos

The Philippine Agricultural Scientist

A coconut climber mechanism was subjected to Finite Element Analysis (FEA) to improve its overall design and analyze its strength characteristics. The von Mises stress, total deformation, and factor of safety were evaluated using static structural analysis for the seat and pedal assemblies of the mechanism. The design has a minimum yielding factor of safety of 7.03 for the seat assembly and 12.09 for the pedal assembly. If aluminum is used as an alternative to steel, the prototype's weight can be reduced to at least 64.56% without compromising its strength properties. The weight reduction by using aluminum is expected to …

Tardys Quantifiers: Extracting Temporal And Reversible Dynamical Symmetries, Nhat Vu Minh Nguyen, Arjendu K. Pattanayak, Andres Aragoneses

2023 Symposium

One of the great challenges in complex and chaotic dynamics is to reveal the details of its underlying determinism. This can be manifest in the form of temporal correlations or structured patterns in the dynamics of a measurable variable. These temporal dynamical structures are sometimes a consequence of hidden global symmetries. Here we identify the temporal (approximate) symmetries of a semiconductor laser with external optical feedback, based on which we define the Temporal And Reversible DYnamical Symmetry (TARDYS) quantifiers to evaluate the relevance of specific temporal correlations in a time series. We show that these symmetries are also present in …

Effective Nanomembranes From Chitosan/Pva Blend Decorated Graphene Oxide With Gum Rosin And Silver Nanoparticles For Removal Of Heavy Metals And Microbes From Water Resources, Mohamed Morsy

Nanotechnology Research Centre

No abstract provided.

Domain Wall Saddle Point Morphology In Ferroelectric Triglycine Sulfate, C. J. Mccluskey, A. Kumar, Alexei Gruverman, I. Luk’Yanchuk, J. M. Gregg

Alexei Gruverman Publications

Ferroelectric domain walls, across which there is a divergence in polarization, usually have enhanced electrical conductivity relative to bulk. However, in lead germanate, head-to-head and tail-to-tail walls are electrically insulating. Recent studies have shown that this is because, when oppositely oriented domains meet, polar divergence is obviated by a combination of domain bifurcation and suspected local dipolar rotation. To explore the uniqueness, or otherwise, of this microstructure, we have used tomographic piezoresponse force microscopy to map three-dimensional domain morphologies in another uniaxial ferroelectric system: triglycine sulfate. This mapping reveals an abundance of domain wall saddle points, which are characteristic of …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

A Study Of Reciprocal Underwater Motion And Its Use In Algae Harvesting, Marguerite Bright

Undergraduate Honors Theses

In 2009, many research groups at different companies and universities were funded by Statoil to study the use of algae as a potential biofuel. Combined with the Chesapeake Bay TMDL given by the EPA, a team at William & Mary and VIMS studied the growth and harvest of wild algae in the York River. This method also removed harmful nutrients such as nitrogen and phosphorus from the waterways. Other independent research projects stemmed from this. In 2014, a research team sought to commercialize and automate the IWAGS system, and found that a single oscillating blade was the most effective. This …

Assessment Of Bridge Pier Response To Fire, Vehicle Impact, And Air Blast, Chen Fang, Qusai Alomari, Daniel G. Linzell

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Highway bridges exposed to intentional or unintentional fire followed by combined vehicle impact and air blast are at risk of significant damage and, possibly, collapse. Limited studies examining the complex effects of these extreme demands on bridge support elements and parametrizing their response and damage are found in the open literature. Research that is presented is part of an ongoing numerical investigation examining round, multi-column, reinforced concrete (RC), bridge pier behavior subject to multi-hazard scenarios involving fire, vehicle impact, and air blast. Detailed nonlinear finite element analysis models of single columns and multi-column piers supported by a pile foundation system …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Effect On Focusing Fields By Ferromagnetic Cell Cores In Linear Induction Accelerators, Cooper Guillaume

Senior Honors Theses

In the Los Alamos National Laboratories DARHT facility, there are two perpendicular linear induction accelerators, LIAs. The LIAs’ solenoids produce magnetic fields which focus the electron beam. Simultaneously, the accelerating pulse creates a magnetic field. These two field intensities act upon a ferromagnetic material in the cells to enhance magnetic flux density. Due to the nonlinearity of the material, this flux density will reach a saturation point. In turn, the magnetic field intensity of the axial solenoidal magnetic field will be affected and slightly altered. The width of the electron beam will increase, causing a decrease in effectiveness. Through simulation, …

Analysis And Application Of Finite Element And High-Order Finite Difference Methods For Maxwell’S Equations In Complex Media, Li Zhu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Perfectly Matched Layer (PML) technique is an effective tool introduced by B´erenger [13] to reduce the unbounded wave propagation problem to a bounded domain problem. This dissertation focuses on two different PML models and their applications to wave propagation problems with Maxwell’s equation in complex media. We investigate these models using two popular numerical methods: the Finite Difference Method (FDM) in Chapters 2 and 3, and the Finite Element Method (FEM) in Chapters 4 and 5.In Chapter 2, we focus on analyzing the stability of a PML developed by B’ecache et al. [10] for simulating wave propagation in the …

Investigating Properties Of Commercially Available Ir Detector Technology, Ethan Taylor

ATU Research Symposium

With the ability to transcode valuable information from light emitting objects, infrared (IR) detector technology has begun to find recreational use in the form of non-contact thermometers and home insulation tools. Research and industry have long been using IR technology in the form of high-altitude balloons, CubeSats, and UAV cameras, but the technology remains a niche market, and thus, a burdensome financial investment. As such, given general consumer products recently introduced as more economically viable, we sought to design an affordable IR camera capable of effective and meaningful data collection. To do so, we utilized a Raspberry Pi 4 and …

An Analysis Of Energy Production And Efficiency In Various Longbow Archery Models, Hannah Mcpherson

Honors Projects

An analysis of the energy production and efficiency of three lab-tested longbow models is undertaken. The first model, which is constructed to not allow flexing of limbs and which uses a frictionless cart and track in place of an arrow, demonstrated an efficiency of 50% +/- 40%. The second model, which is constructed similarly to the first with the exception of a wooden dowel now being used as an arrow-like object, demonstrated an efficiency of 13% +/- 3%. The last model, a 3D printed longbow with flexible limbs using the wooden dowel as an arrow-like object, demonstrated an efficiency of …

Directional Tensile Strength Of Carbon Fiber Reinforced Polylactic Acid In Extrusion Based Additive Manufacturing For Custom Failure Parts, Lucinda Slattery

Honors College

Inherently, additive manufacturing printed parts have faults between layers perpendicular to the direction of printing, both in the plane parallel to the build plate and in the z direction (out of the build plate). For most parts, these “built-in” faults from the manufacturing process act as limiting conditions for the part's mechanical strength. While perpendicular to printing is typically the weakest due to layer adhesion faults, parallel to printing is typically the strongest due to cohesive material and fiber orientation. Fiber orientation can be measured through various methods, with the two explored being X-Ray Microscopy (XRM) for 3D analysis, and …

Thermal Stability Of Platinum-Silicon Alloy Films Grown On Langasite Substrates For Use In Microwave Acoustic Sensor Technology, Kell Fremouw

Honors College

Wireless sensors that can operate in temperatures up to 1000°C are widely needed for real time monitoring of large-scale industrial processes. Such sensors will improve efficiency and prevent component failure. Under previous work at UMaine, Surface Acoustic Wave Resonator (SAWR) sensors fabricated on piezoelectric langasite (La₃Ga₅SiO₁₄) wafers have shown promise for wireless strain measurements at high temperatures. However, there is a major technical challenge in attaching SAWR langasite based sensors to metal parts because the large differences in the coefficient of thermal expansion (CTE) between langasite and metals leads to large thermal stresses and …

Effects Of Drying Temperature And Tempering Duration On Hybrid Rice Seed Germination, Thin-Layer Drying Characteristics, And Power Requirement, Rina A. Bawar, Joanne P. Foliente, Kevin F. Yaptenco, Mitchie Ann L. Cabiles

The Philippine Agricultural Scientist

This study presents the results of thin-layer drying tests for hybrid rice seeds. The independent factors were drying air temperature (45, 55, and 65 °C) and tempering duration (1, 2, and 4 h), while the dependent parameters were seed germination and drying characteristics, including drying rate, total and effective drying operation times, and power requirement. Considering one hybrid and 3 mo storage period after drying, the results showed that samples continuously dried at 45 and 55°C resulted in 91 and 86% germination percentages, respectively, which were above the acceptable Philippine national standard of at least 85%. However, when tempered for …

Air And Air-Steam Gasification Of Coconut Shell In A Fluidized Bed, Keynty Boy V. Magtoto, Rossana Marie C. Amongo, Sergio C. Capareda, Ronaldo B. Saludes

The Philippine Agricultural Scientist

Coconut shells’ abundance in tropical countries, along with its high volatile combustible matter (83.51%) and energy content (18.68 MJ kg^-1) make it a good biomass resource and a promising feedstock for gasification. In gasification, different mediums such as air, steam, oxygen, or their combinations can be used to react with the solid carbon and heavy hydrocarbons of biomass. Hence, the effects of using an air-steam mixture as a gasifying agent for the bench-scale fluidized bed gasification of coconut shells were studied. The steam-to-carbon ratio (SCR) was varied to evaluate its effect on the resulting syngas quality and gasification …

Numerical Study Of Owls’ Leading-Edge Serrations, Asif Shahriar Nafi

Electronic Theses and Dissertations

The silent flight ability of owls is often attributed to their unique wing morphology and its interaction with their wingbeat kinematics. Among these distinctive morphological features, leading-edge serrations stand out – these are rigid, miniature, hook-like patterns located at the leading edge of the primary feathers of their wings. It had been hypothesized that these leading-edge serrations serve as a passive flow control mechanism, influencing the aerodynamic performance and potentially affecting the boundary layer development over the wing, subsequently influencing wake flow dynamics. Despite being the subject of research spanning multiple decades, a consensus regarding the aerodynamic mechanisms underpinning owls’ …

New Features In Landyne 5 - A Software Suite For Materials Characterization And Crystallography By Transmission Electron Microscopy, Xing-Zhong Li

Nebraska Center for Materials and Nanoscience: Faculty Publications

Landyne software suite (version 5) includes fifteen standalone computer programs for materials characterization and crystallography by transmission electron microscopy [1]. A launcher interface is provided for users to access all components conveniently. The purpose of this software suite is twofold: i) as research tools to analyze experimental results, ii) as teaching tools to explore the varieties of electron diffraction methods and crystallographic image processing principles.

The Landyne suite previously included: PTable, an interactive periodic table of elements; SVAT, a structural visual and analytical tool; SAED and PCED, simulation and analysis of electron diffraction (spot and ring) patterns; QSAED and QPCED, …