Systems Engineering Commons^™

Optimization Of Human Interactions In The College Campus Model Via Simio Integration, Benjamin E. Chaback

Doctoral Dissertations and Master's Theses

College campuses are a significant part of life in some cities. Many students each year attend university, pursuing additional knowledge from faculty members. Both staff and faculty members rely on these students to have successful jobs and to ensure the university functions. Yet recently, more and more students are attending, leading to overcrowding, lower admission rates, and difficulty getting into good programs. Previous work exists on qualitative student affairs and quantitative retention data, yet little on using simulations to model this problem. This work aimed to (a) Determine the ability to successfully model human interactions/people flow on a college campus, …

Reliability Modeling And Improvement Of Critical Infrastructures: Theory, Simulation, And Computational Methods, José Carlos Hernández Azucena

Graduate Theses and Dissertations

This dissertation presents a framework for developing data-driven tools to model and improve the performance of Interconnected Critical Infrastructures (ICIs) in multiple contexts. The importance of ICIs for daily human activities and the large volumes of data in continuous generation in modern industries grant relevance to research efforts in this direction. Chapter 2 focuses on the impact of disruptions in Multimodal Transportation Networks, which I explored from an application perspective. The outlined research directions propose exploring the combination of simulation for decision-making with data-driven optimization paradigms to create tools that may provide stakeholders with optimal policies for a wide array …

Using Strategic Options Development And Analysis (Soda) To Understand The Simulation Accessibility Problem, Andrew J. Collins, Ying Thaviphoke, Antuela A. Tako

Engineering Management & Systems Engineering Faculty Publications

Simulation modelling is applied to a wide range of problems, including defense and healthcare. However, there is a concern within the simulation community that there is a limited use and implementation of simulation studies in practice. This suggests that despite its benefits, simulation may not be reaching its potential in making a real-world impact. The main reason for this could be that simulation tools are not widely accessible in industry. In this paper, we investigate the issues that affect simulation modelling accessibility through a workshop with simulation practitioners. We use Strategic Options Development and Analysis (SODA), a problem-structuring approach that …

Risk-And-Resiliency-Intelligent Supply Chain (Rrisc), Ahmad A. Abdelnabi, Ahmed M. Abdelmagid, Ghaith Rabadi, Andres Sousa-Poza, C. Ariel Pinto

Modeling, Simulation and Visualization Student Capstone Conference

This work proposes a risk-and-resiliency-intelligent supply chain (RRiSC) tool which is an SC risk management framework that leverages cutting-edge technologies in Artificial Intelligence (AI), Big Data Analytics (BDA), and Digital Twins (DT) to develop specific capabilities for SC risk management. RRiSC is a convergence of mature tools and techniques embedded in three modules: Modeling, Simulation, and Visualization – all together integrate the optimization, simulation, and data analytics to test the performance of the whole supply network under different scenarios through measuring the vital KPIs, identifying the vulnerabilities, and setting proactive plans to diminish risks consequences.

Combining Green Metrics And Digital Twins For Sustainability Planning And Governance Of Smart Buildings And Cities, Casey R. Corrado, Suzanne M. Delong, Emily G. Holt, Edward Y. Hua, Andreas Tolk

VMASC Publications

Creating a more sustainable world will require a coordinated effort to address the rise of social, economic, and environmental concerns resulting from the continuous growth of cities. Supporting planners with tools to address them is pivotal, and sustainability is one of the main objectives. Modeling and simulation augmenting digital twins can play an important role to implement these tools. Although various green best practices have been utilized over time and there are related attempts at measuring green success, works in the published literature tend to focus on addressing a single problem (e.g., energy efficiency), and a comprehensive approach that takes …

Identification Of Moving Bottlenecks In Production Systems, Funmilayo Mofoluwasola Adeyinka

Graduate Theses, Dissertations, and Problem Reports

Manufacturing sector have been plagued by bottlenecks from time immemorial, leading to loss of productivity and profitability, various research effort has been expended towards identifying and mitigating the effects of bottlenecks on production lines. However, traditional approaches often fail in identifying moving bottlenecks. The current data boom and giant strides made in the machine learning field proffers an alternative means of using the large volume of data generated by machines in identifying bottlenecks. In this study, a hierarchical agglomerative clustering algorithm is used in identifying potential groups of bottlenecks within a serial production line.

A serial production line with five …

Simulating Alternative Tuberculosis Diagnosis Methods In Underdeveloped Countries, Luke Turner

Industrial Engineering Undergraduate Honors Theses

Tuberculosis is the deadliest infectious disease in the world; it is especially rampant in underdeveloped countries because they do not have the infrastructure, technology, or funding to properly combat the infection. However, the development of portable point-of-care diagnosis machines can reverse this epidemic as they far surpass conventional laboratory identification. The question now is where to place these machines, which is a difficult decision with a lack of data. Therefore, a flexible simulation model is created to test the implementation of these machines with different countries and configurations. The simulation tests the baseline model and three proposed implementations of the …

Extraction Of Thorium Dioxide And Other Ree Oxides From Monazite Ore, Bradley M. Bennett, Julia Johnson, Kelsey Hay, Chelsea Connolly-Horton

Chancellor’s Honors Program Projects

No abstract provided.

Sequence-Based Simulation-Optimization Framework With Application To Port Operations At Multimodal Container Terminals, Mariam Aladdin Kotachi

Engineering Management & Systems Engineering Theses & Dissertations

It is evident in previous works that operations research and mathematical algorithms can provide optimal or near-optimal solutions, whereas simulation models can aid in predicting and studying the behavior of systems over time and monitor performance under stochastic and uncertain circumstances. Given the intensive computational effort that simulation optimization methods impose, especially for large and complex systems like container terminals, a favorable approach is to reduce the search space to decrease the amount of computation.

A maritime port can consist of multiple terminals with specific functionalities and specialized equipment. A container terminal is one of several facilities in a port …

Dispensing Medical Countermeasures In Public Health Emergencies Via Home Health Agencies And Points Of Distribution, Anna Hudgeons

Industrial Engineering Undergraduate Honors Theses

A major concern regarding emergency preparedness on the state government level involves the handling and dispensing of the Strategic National Stockpile (SNS) of medicinal supplies. Each state is required to update and maintain a plan of action for dispensing SNS materials that would effectively provide care to the state’s population in times of distress. This research evaluates a state’s ability to dispense an adequate amount of medicine to her population in a timely manner, specifically after it has been received by the state government. Although simulation modeling has previously been utilized to replicate the dispensing process at pre-designated points of …

Theory And Practice Of Supply Chain Synchronization, Michael Prokle

Doctoral Dissertations

In this dissertation, we develop strategies to synchronize component procurement in assemble-to-order (ATO) production and overhaul operations. We focus on the high-tech and mass customization industries which are not only considered to be very important to create or keep U.S. manufacturing jobs, but also suffer most from component inventory burden. In the second chapter, we address the deterministic joint replenishment inventory problem with batch size constraints (JRPB). We characterize system regeneration points, derive a closed-form expression of the average product inventory, and formulate the problem of finding the optimal joint reorder interval to minimize inventory and ordering costs per unit …

Optimizing The B.O.B., Valerie N. Washington, Douglas Starzec

KSU Journey Honors College Capstones and Theses

The Kennesaw State University Department of Transportation manages the Big Owl Bus (B.O.B.). The B.O.B. has 9 routes which provide transportation around and between the Kennesaw and Marietta campuses, as well as to select off-campus apartment complexes and shopping centers. We utilized a number of methodologies to recommend improvements to the efficiency and accessibility of the B.O.B. We first used the vehicle routing problem to develop a binary integer linear programming model. This allowed us to determine a new set of routes that minimize total travel time across the routes. Next, we developed an integer non-linear programming model to assign …

A Predictor Analysis Framework For Surface Radiation Budget Reprocessing Using Design Of Experiments, Patricia Allison Quigley

Engineering Management & Systems Engineering Theses & Dissertations

Earth’s Radiation Budget (ERB) is an accounting of all incoming energy from the sun and outgoing energy reflected and radiated to space by earth’s surface and atmosphere. The National Aeronautics and Space Administration (NASA)/Global Energy and Water Cycle Experiment (GEWEX) Surface Radiation Budget (SRB) project produces and archives long-term datasets representative of this energy exchange system on a global scale. The data are comprised of the longwave and shortwave radiative components of the system and is algorithmically derived from satellite and atmospheric assimilation products, and acquired atmospheric data. It is stored as 3-hourly, daily, monthly/3-hourly, and monthly averages of 1°x1° …

A System-Of-Systems Framework For Assessment Of Resilience In Complex Construction Projects, Jin Zhu

FIU Electronic Theses and Dissertations

Uncertainty is a major reason of low efficiency in construction projects. Traditional approaches in dealing with uncertainty in projects focus on risk identification, mitigation, and transfer. These risk-based approaches may protect projects from identified risks. However, they cannot ensure the success of projects in environments with deep uncertainty. Hence, there is a need for a paradigm shift from risk-based to resilience-based approaches. A resilience-based approach focuses on enhancing project resilience as a capability to cope with known and unknown uncertainty. The objective of this research is to fill the knowledge gap and create the theory of resilience in the context …

A Recommendation System For Meta-Modeling: A Meta-Learning Based Approach, Can Cui, Mengqi Hu, Jeffery D. Weir, Teresa Wu

Faculty Publications

Various meta-modeling techniques have been developed to replace computationally expensive simulation models. The performance of these meta-modeling techniques on different models is varied which makes existing model selection/recommendation approaches (e.g., trial-and-error, ensemble) problematic. To address these research gaps, we propose a general meta-modeling recommendation system using meta-learning which can automate the meta-modeling recommendation process by intelligently adapting the learning bias to problem characterizations. The proposed intelligent recommendation system includes four modules: (1) problem module, (2) meta-feature module which includes a comprehensive set of meta-features to characterize the geometrical properties of problems, (3) meta-learner module which compares the performance of instance-based …

Patient-Centered Appointment Scheduling Using Agent-Based Simulation, Tammy Toscos, Ayten Turkcan, Brad Doebbeling

Tammy R Toscos

Enhanced access and continuity are key components of patient-centered care. Existing studies show that several interventions such as providing same day appointments, walk-in services, after-hours care, and group appointments, have been used to redesign the healthcare systems for improved access to primary care. However, an intervention focusing on a single component of care delivery (i.e. improving access to acute care) might have a negative impact other components of the system (i.e. reduced continuity of care for chronic patients). Therefore, primary care clinics should consider implementing multiple interventions tailored for their patient population needs. We collected rapid ethnography and observations to …

Simulation-Based Optimisation Model For The Lean Assessment In Sme: A Case Study, Amr Arisha, Amr Mahfouz, John Shea

Conference papers

Due to their space limitation and small production scale, small and medium enterprises (SME) are vulner-able to rapid changes. Lean principles are considered as effective improvement approach to eliminate sys-tem’s waste and inefficiencies. Although much of the academic materials have addressed the lean practic-es into large, global companies, they can still be adjusted to SMEs. Risks are usually associated with lean implementation process due to the drastic required changes in business policies and operations. Simulation can be successfully used to predict the impact of the proposed changes ahead of the implementation which helps to mitigate risks. Integrating simulation with optimization …

Evaluating The Impact Of Patient Arrival Patterns In The Performance Of Appointment Scheduling Rules, Alcides Santander-Mercado, Jose Zayas-Castro, Laila Cure, Ali Yalcin

Laila Cure

This paper evaluates the ability of commonly used Appointment Scheduling Rules (ASRs) in smoothing the effect of environmental factors in the performance of an outpatient scheduling system. ASRs have been widely implemented in outpatient clinics to improve performance measures such as staff idle time, patient waiting time, and facility congestion. However, the successful implementation of an ASR depends on its ability in dealing with the environmental factors affecting the system. Factors such as no-shows, variability of consultation times, patient unpunctuality, walk-in patient arrivals and the number of admitted patients per session affect the performance of the clinics in terms of …

Police Operations Simulation, Robert Mcgee

Industrial and Manufacturing Engineering

In this report, the author explains the process of creating the Police Operations Simulation, shows step-by-step how it works, and statistically analyzes the results from SLOPD’s own proposed and current schedules. The data-gathering from the department and the simulation itself will receive the bulk of the coverage in this report, followed by sample results from SLOPD and a business plan for future sale to other departments.

Using the given numbers, it appears that the proposed schedule will result in significantly improved coverage for the city of San Luis Obispo. While any increase in the number officers on patrol tends to …

Nato Human View Architecture And Human Networks, Holly A. H. Handley, Nancy P. Houston

Engineering Management & Systems Engineering Faculty Publications

The NATO Human View is a system architectural viewpoint that focuses on the human as part of a system. Its purpose is to capture the human requirements and to inform on how the human impacts the system design. The viewpoint contains seven static models that include different aspects of the human element, such as roles, tasks, constraints, training and metrics. It also includes a Human Dynamics component to perform simulations of the human system under design. One of the static models, termed Human Networks, focuses on the human-to-human communication patterns that occur as a result of ad hoc or deliberate …

Sensitivity Analysis Framework For Large And Complex Simulation Models, Ghaith Rabadi, Shannon Bowling, Charles Keating, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

In this paper, a framework for conducting Sensitivity Analysis (SA) on large and complex simulation models is introduced. The framework consists of components that are designed to make the SA a systematic process that is easy to manage and follow by simulation analysts and practitioners. Unlike local SA (one-variable-at-a-time SA), the method presented here is variance-based and it is rooted in the field of Design of Experiments (DoE) where Input Variables are varied and Output Variables are measured. Based on the DoE results, a risk scoring system is developed to identify the sensitivity of the Input Variables, and as a …

Process Modelling Support For The Conceptual Modelling Phase Of A Simulation Project, Cathal Heavey, John Ryan

Conference papers

While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the conceptual modelling phase. Several authors have reported the advantages of using process modelling tools in the early phases of a simulation project.

This paper provides an overview of process modelling tools in relation to their support for simulation, categorizing the tools into formal method and descriptive methods. A conclusion from this review is that none of the tools available adequately support the requirements gathering phase of simulation. This is not surprising as none of the process modelling …

Requirements Gathering For Simulation, John Ryan, Cathal Heavey

Conference papers

This paper discusses the current shortfalls in support for the pre-coding phases of a discrete event simulation project. The paper then presents a process modelling technique, Simulation Activity Diagrams (SADs), developed to specifically support the initial requirements gathering phases of a simulation project. The paper concludes with an outline of proposed future developments to the modelling technique.

A Dynamic Heuristic For The Stochastic Unrelated Parallel Machine Scheduling Problem, Jean-Paul Arnaout, Ghaith Rabadi, Ji Hyon Mun

Engineering Management & Systems Engineering Faculty Publications

This paper addresses the problem of batch scheduling in an unrelated parallel machine environment with sequence dependent setup times and an objective of minimizing the total weighted mean completion time. The jobs' processing times and setup times are stochastic for better depiction of the real world. This is a NP-hard problem and in this paper, new heuristics are developed and compared to existing ones using simulation. The results and analysis obtained from the computational experiments proved the superiority of the proposed algorithm PMWP over the other algorithms presented.

Simulating Queue Scheduling Policies For A Spacecraft Simulator, Paul Savory, Gene Saghi

Department of Industrial and Management Systems Engineering: Faculty Publications

The mission of the Cassini spacecraft is a unique opportunity to gain insights into major scientific questions about Saturn, the creation of the solar system, and the conditions that led to life on Earth. In preparation for the launch, NASA's Jet Propulsion Laboratory developed a software simulator to emulate the hardware data-control system of the spacecraft. Its primary use is to validate and verify commands that will be transmitted to the spacecraft. To improve the performance of the simulator, we used the SIMAN simulation language to model numerous queue-scheduling policies. Implementation of the simulation results combined with a software-code redesign …