Industrial Technology Commons^™

Identification Of Key Persons In The Information Security Incident Management Process And Distribution Of Roles Between Them, Fayzullajon Bakhtiyorovich Botirov, Sharifjon Rakhimovich Gafurov, Azam Anvorovich Gafurov

Chemical Technology, Control and Management

This research paper is devoted to the process of information security incident management and the distribution of the roles of key persons in this process. The skills required for members of the information security incident response team are considered, positions and responsibilities are given - typical positions that exist in each organization, testing and improvement procedures are given, the role of the information security incident response team members and employee positions is shown. The quality of the group leader is reflected; responsible for personnel management, scoping and reporting on the state of the organization at a higher level of the …

A Study On Dynamic Characteristics Of A New Remote Transformer Current Converter Without Compensating Capacitor, Sulton Faizullaevich Amirov, Nargisa Kamilovna Babanazarova, Nurullo Rahmatullaevich Yuldashev

Chemical Technology, Control and Management

In this research paper, analytical equations of the transient characteristics of a new remote transformer current converter without a compensating capacitor have been obtained when a stepwise, linearly increasing, sinusoidal and sinusoidal with a damped amplitude of effects was applied to their input. It has been shown that the developed current converter can be represented in the structural schemes of monitoring and control systems in the form of a series-connected real differentiating link without statism and inertial (aperiodic) link of the first order, and in the case of neglecting active losses in the magnetic circuit and when the converter is …

Models And Fuzzy Microclimate Control System In The Storage Of Archival Documents, Avaz Marakhimov Scd, Prof, Abdushukur Abdullaev

Chemical Technology, Control and Management

In this article, the main object of research is the creation of appropriate microclimatic conditions to ensure reliable and high-quality storage of archival documents, as well as automatic control of the optimal values of the main parameters of the external and internal environment that directly affect the quality of storage. To control the microclimate, three categories of models for automatic control of these parameters are considered separately in the archives: the “white box”, “black box” and “gray box " models. The results of the analysis of the advantages and disadvantages of the considered models are presented. The generalized structure …

Problem Solving Methods For Synthesis Of Physical Principles Of Mechatronic Module Operations In Intelligent Robotic Systems, Nazarov Khayriddin Nuritdinovich

Chemical Technology, Control and Management

The scientific paper investigates the methods for solving problems of synthesis of physical principles of operation of mechatronic modules of intelligent robotic systems are considered.

In addition, it deals with the specifics of the process of synthesis of the physical principles of the operation of mechatronic modules using predicate models, list models and information matrices of physical and technical effects.

It shows the interpretation of the components of the model of the system for the synthesis of the physical principles of operation of mechatronic modules of intelligent robotic systems and automatic control and the features of the synthesis algorithm for …

Results Of X-Ray Phase And Ir-Spectral Analysis Of Azosuperphosphates Obtained On The Basis Of Phosphorites Of Central Kizilkum, Elyor Atashev, Maksud Jabbievich Jumaniyazov, Sayfitdin Mukhitdinovich Tadjiev

Chemical Technology, Control and Management

This article is devoted to the use of ammonium sulfate in the production of nitrogen-phosphorus fertilizers, which are widely used in agriculture today. In the research work, the possibilities of obtaining azo superphosphate are described in detail by the use of intensive technology based on low-grade phospharites of the Central KyzylKum. X-ray and IR-spectroscopic analyzes of a new type of NP-complex fertilizers obtained using a solution of ammonium sulfate in sulfuric acid are described in detail. The X-ray analysis of the obtained sample on the X-ray diffraction pattern of the azo-superphosphate fertilizer revealed the appearance of peaks in the interplanar …

Enterprise Engineering And Intellectual Technologies For Lifecycle Management Of Industrial Production, Nodirbek Rustambekovich Yusupbekov, Valery Borisovich Tarasov, Shukhrat Manapovich Gulyamov, Fahritdin Raupovich Abdurasulov

Chemical Technology, Control and Management

The fundamental scientific problem of the development of the mathematical foundations of engineering for industrial enterprises and the development of mathematical methods of production management, as well as the creation of intelligent systems for coordinated management of the life cycles of products and production in the network of enterprises are discussed. The issues in demand in the development of a vast interdisciplinary field of enterprise engineering and the development of modern network enterprises and intelligent production using mathematical modeling methods are discussed.

A Study Of Hygrometer Based On The Method Of Intracavity Laser Absorption, Abdulaziz Muminovich Nazarov Prof, Mirkomil Mirhidoyat Ogli Xasanov

Chemical Technology, Control and Management

The article presents the results of experimental studies of a fiber-optic humidity sensor, the principle of operation of which is based on the method of intracavity laser absorption. A method of intracavity laser absorption is described, which makes it possible to dramatically increase the sensitivity of the fiber humidity sensor by switching to it. A schematic diagram of a fiber optical humidity sensor using a differential detection scheme and a design of an active ring laser fiber consisting of a diode pump laser, a fiber pump beam splitter, two directional couplers, a measuring ring laser, a ring comparison laser, two …

Selection Of Mineral Raw Material Fields For Glauconite Sorption Materials, Diyor Xadjibayev, Furkat Ilyasovich Erkabaev

Chemical Technology, Control and Management

Natural minerals, such as bentonite, kaolinite, biotite, vermiculite, and glauconite, which have sufficiently high performance properties in the softening of industrial and waste water, softening and cleaning of heavy metals, are promising. To study the physical and chemical properties of glauconites from various deposits of the country, samples of glauconite mineral were brought from the Parkent, Bukhara, and Karakalpak mountain reserves, their physical and chemical properties were studied, compared with each other, and the optimal reserve was selected. The reserves of these deposits are sufficient and have the potential for industrial development. The purpose of this study is to compare …

Application Of The Ultrasonic Generator In The Extractor And Determination Of Its Energy Consumption, Shaxnoza Abduvaxitovna Sultanova, Jasur Esirgapovich Safarov, Azamat Usenov, Doston Ishmuhammat Ogli Samandarov

Chemical Technology, Control and Management

An ultrasonic generator was used in the Soxhlet extractor. To evaluate the process, the solvent flow was examined. The influence of the flow time in the Soxhlet on the process was analyzed. The formula for the residence time of streaming particles in the apparatus is given. A standardized volume curve V was formed. The time required for the solvent to remain in the apparatus is important during the extraction process. The description of the structure of flows of mass metabolic processes also means that it allows you to determine the movement and distribution of substances in these flows. Therefore, we …

Algorithms For Synthesis Of Discrete Controllers In Nonlinear Control Systems With Delay, Alisher Rajabaliyevich Mallayev, Suban Nurullayevich Xusanov

Chemical Technology, Control and Management

Algorithms for the synthesis of discrete controllers in nonlinear control systems, taking into account the delay, have been proposed. The synthesized vector controller provides a solution to the control problem, for example, the translation of the image point of a closed system from arbitrary initial conditions to the origin of the phase space coordinates. Built on the basis of a series-parallel set of invariant manifolds, the dynamic discrete controller ensures the fulfillment of the specified technological requirements, the asymptotic stability of a closed discrete-continuous system, and has the property of predicting the behavior of the system after sampling. These algorithms …

Production Of Lime-Ammonium Nitrate Based On Chalk, Nitrate And Ammonium Sulfate, O.X. Rasulov, Abdurasul Mamataliyev, M.X. Dadaxodjaeva, Sh.S. Namazov, B.M. Beglov

Chemical Technology, Control and Management

The article studies the process of obtaining carbonate-ammonium nitrate (CAN) based on the mixing of melt ammonium nitrate (NH₄NO₃) with chalk (СаСО₃) and ammonium sulfate (NH₄)₂SO₄). For the granulation of nitrate-sulfate-carbonate melt the prilling method is applied using a granulation tower. Determined the composition and properties of new types of fertilizers. It is shown that with the ratio NH₄NO₃ : СаСО₃ : (NH₄)₂SO₄ = 100 : 24 : 1 the product contains 28,03% N, SO₃ – 0,50%, 10% …

Principles Of Eliminating The Impact Of Disturbances On Integrated Information And Analytical Systems, Orifjon Olimovich Zaripov, Umidjon Sharabidinovich Hamrakulov, Fatima Faxritdinovna Isxakova

Chemical Technology, Control and Management

Today, production management using integrated information and analytical systems and their integration with the elements of Industry 4.0 is considered one of the most pressing problems in all areas of production. The correct formation of the structure of information systems in their development contributes to the formation of elements of Industry 4.0 and their further full and high-quality integration into other areas. When implementing these processes, one of the most important steps is to reduce the impact of disturbances on integrated information and analytical systems. Taking into account the above, the article considers mathematical models of the principles of eliminating …

Main Stages Of Automated System Of Processes For Determining And Ensuring Functional And Parametric Compatibility Of Production And Technological Systems, Sarvar Botir Ugli Nabiyev

Chemical Technology, Control and Management

This article presents the main stages of the development of an automated system of processes for determining and ensuring functional and parametric compatibility (FPC) of components of production and technological systems (PTS), in particular production and technological modules (PTM) of machine-building production, respectively, based on the analysis and systematization of technological zones of loading of the main technological equipment (MTE) and the construction of coating surfaces, the main parameters of industrial robots and storage systems (SS), determination and mathematical formalization of coating surfaces and guiding planes of MTE loading zones, formation of types of analytical dependences of FPC PTM functions, …

Mathematic Simulation Of Glass Melting Process In Glass Production, Shuhrat Manapovich Gulyamov, Azamat Toirovich Rajabov, Utkir Uktam Ugli Kholmanov

Chemical Technology, Control and Management

A systematic analysis of the technological process of glass melting as an object of automatic control and management has been carried out. As an object of automatic control with distributed parameters, the mathematical description of the glassmaking furnace operation has been developed (considering the main phenomenological features of the technological mode of glassmaking).In this paper, a mathematical description of charge melting process, additional heating by electric current, bubbling, thermal conductivity and heat fluxes during the processing of molten glass have been generated. Initial conditions and simplifying assumptions have been derived. The model is based on the equations of continuity, momentum …

Development And Implementation Of Two-Dimensional Fault-Tolerant Programmable Logical Controllers, Azizbek Nodirbekovich Yusupbekov, Nodirjon Turgunboy Ugli Tulaganov, Khurshid Salim Ugli Turaev

Chemical Technology, Control and Management

It has been revealed that a significant part of industrial control systems designed for technological facilities with more than one input and one output and the most widespread are objects with two inputs and two outputs.The article describes the programming environment for fault-tolerant two-dimensional control systems using PID controller, which software is implemented in an environment for programmable logic controllers (PLC).An experimental testing system has been implemented and software settings and regulator settings have been considered. Real-time PID controllers and filters have been implemented. It has been implemented a variation of the control system software with object imitation.

Errors Of Universal Contactless Converters Of Monitoring And Control Systems From External Magnetic Fields, A.M Plakhtiev, Gayratjon Gaziev, Yahyojon Meliboyev, Odil Doniyorov

Chemical Technology, Control and Management

In communication and communication devices, power equipment, relay protection and automation terminals, in the electric power industry of "smart" cities and homes, in industry, in railway transport, microprocessor-based relay protection and automation devices, distributed generation installations, including renewable energy sources, and electricity storage, as well as "intelligent" automated information and measurement systems are beginning to be used. Contactless converters of direct and alternating currents of control and control systems are widely used in them. Their disadvantages are a narrow range of controlled currents, large dimensions and weight. Therefore, it is important to eliminate them. The paper discusses the general principles …

Algorithms Of System Synthesis For Stabilizing Uncertain Dynamic Objects, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

The article deals with the formation of stable algorithms for the system synthesis for the stabilizing uncertain dynamic objects based on the method of local optimization in the presence of approximate mathematical models. The article analyzes the issues of building adaptive control systems using the concept of roughness, taking into account the assessment of the maximum allowable discrepancy between the object and its model. Some of the most constructive algorithms for determining pseudo-inverse matrices are given. When calculating the pseudo-inverse matrix of the control object, modified QR decomposition algorithms are used, obtained by deleting or assigning a column. The obtained …

To Increasing The Absorption Area Of Column Apparatus With Tubular Lattice Nozzles, Nurmukhamedov Habibulla Sagdullaevich, Batir Babatulaev, Elbek Mavlanov, Samukdjan Nigmadjanov

Chemical Technology, Control and Management

The problem of creating a compact refrigeration zone for absorbers with tubular-lattice nozzles made of pipes with spiral turbulators is discussed. Research has been carried out on the influence of the groove depth h/D and α/α_гл of the step of their placement t/D on the degree of heat transfer intensification α/α_о in the transition region of the gas-liquid flow. An intensification of heat transfer has been achieved only by increasing the groove depth from h/D = 0,003 to 0,095 and the optimal pitch of the grooves, the intensity of heat transfer is 2 or more times. Research has …

Development Of A New Technology For Obtaining The Substance Of The Drug Acetamizole, Sarvar Saidov, Asqar Abdurazakov, Rixsibay Karimov, Mavluda Baltabayeva

Chemical Technology, Control and Management

The main goal of this work is to obtain a preparation of acetamizole based on local raw materials by a more convenient method of acylation of 2-methoxycarbonylaminobenzimidazole with glacial acetic acid, this synthesis method is proposed for the first time. On the basis of the conducted experiments, favorable conditions for the reaction were found, the influence of the nature of the acid, the temperature, the duration of the reaction and other factors on the course of the reaction was studied, the technology was developed and implemented at the experimental production of "IHRV AN RUz". Based on experiments conducted by scientists …

Analysis Of Consistency Of Similarity Predicates To Measures Of Similarity And Advantages Of Their Application In Digital Systems For Solving Intellectual Problems, Makhmudjon Abdullaev, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The results of the analysis of the correspondence of similarity predicates to similarity measures used in various metric methods used for signal classification and the feasibility of using similarity predicates in the construction of digital systems for solving intellectual problems, for which the simplification of computational operations is of no small importance, are presented. Some general and distinctive features of the similarity predicate are considered in comparison with the euclidean metric in relation to one-dimensional and two-dimensional spaces, and generalized to the case of n-dimensional metric spaces. The expediency of using methods based on the calculation of similarity predicates, which …

Methodology For Determination And Assessment Of Uncertainty Sources Of Textile Materials Total Thermal Resistance, Abdurauf Abdurashidovich Abdukayumov, Ortagoli Sharipovich Hakimov

Chemical Technology, Control and Management

The problems of improving of methods for determination of the total thermal resistance of textile materials are considered. A comparative analysis of the applied methods based on stationary and non-stationary heat exchange is performed. A higher accuracy of non-stationary methods based on measuring the cooling time of a heat cell with subsequent determination of the cooling rate and the total thermal resistance of the material under study is noted. A method is proposed for estimating the variance of the main values required for calculating the total thermal resistance of materials. The results of the study of the relationship between sources …

Mathematical Model Of A System For Controlling And Diagnosing The Safety State Of Oil And Gas Territory, Erkin Uljaev, Utkirjon Murodillaevich Ubaydullaev, Gayrat Bakhtiyarovich Tadzhitdinov, Sherzod Kholmuminovich Eshkuvatov

Chemical Technology, Control and Management

In this article, the way of creation mathematical model of a control system and diagnostics of the security status of the oil and gas territory is considered. For performing diagnostics of the safety of a status of the oil and gas territory as a mathematical apparatus it is suggested to use a boolean algebra. The main controlled objects and their technological parameters which define safety, integrity of saving, operational carrying out monitoring status as separate objects and all oil and gas territory, prediction of the expected threats, economic social, and economic damage are selected. For the creation of a mathematical …

Estimating The Bubbling Process Of Ozone-Containing Gases In The Water, M.P. Parpiev, А.А. Simonov, Aleksey Kamardin, Abdulaziz M. Nazarov

Chemical Technology, Control and Management

Theoretical estimates were made and significant factors of dissolution of ozone-containing gases in water during bubbling in tanks were determined. The expediency of using microbubbles for more efficient saturation of water and aqueous solutions with ozone and generation of ozone with maximum concentration is shown. It is shown that when bubbling gas in water, including ozone-containing gas, the most important indicator is the volume gas content, which determines the ratio of the volume of the gas phase to the volume of the gas-liquid mixture in the contact apparatus. In the presence of a set of bubbles in the water, the …

Mathematical Models Of New Magnetoelastic Sensor For Measure Of Power And Vibration Parameters, Javhar Sulton Ugli Fayzullayev

Chemical Technology, Control and Management

In the paper, the mathematical models of the new magnetoelastic sensor for measuring power and vibration parameters are developed taking into account the aggregation or scattering of the parameters of electromagnetic chains and the characteristics of the magnetization curve of the magnetic conductor material. The analysis of the generated mathematical models and graphs based on them showed that the magnetic chain in which the coils are assembled does not take into account the nonlinearity of the magnetization curve of the magnetic conductive material (electrotechnical steel), the result is 12 ÷ 15% of the experimental results. It varies by 6 ÷ …

Intellectual Educational Technologies Of Coherent Maintenance Of Digital Transformations, Igor Ivanovich Gancherenok, Ulugbek Mannanov, A.G. Davydovsky, Yu.A. Chernyavsky

Chemical Technology, Control and Management

The problems of forming adequate educational technologies and supporting digital transformations for the formation and development of relevant professional competencies as innovative receptivity are interpreted. The fundamental principles of educational technologies that act as a catalyst for educational innovations in the context of digital transformation of economic and social processes are described. The main modern educational platforms of educational support of professional activity are analyzed. The author's interpretation of the synergetic effects in the education system, as well as loans as an educational cryptocurrency is suggested.

Synthesis Of Control Systems For Multidimensional Dynamic Objects Under Parametric Uncertainty Based On The Invariance Theory, U.F Mamirov

Chemical Technology, Control and Management

The problems of synthesis of control systems for multidimensional dynamic objects in the conditions of parametric uncertainty which are based on invariance theory are considered. When constructing stable synthesis algorithms, a recurrent method for determining pseudo-solutions of linear algebraic systems of equations is used. Computational algorithms for the solution based on singular matrix expansions are given. These computational procedures allow us to regularize the problem of synthesis of the considered algorithms for the synthesis of control systems for multidimensional dynamic objects under conditions of parametric uncertainty and improve the quality indicators of control processes.

Study Of The Rheological Properties Of The Suspension Formed During The Production Of Caustic Soda By The Lime Method, Aktam Ulashovich Erkaev, Dildora Tursunova

Chemical Technology, Control and Management

The process of obtaining sodium hydroxide - caustic soda by conversion of soda ash with lime milk in the presence of natural mirabilite - has been investigated. The influence of temperature, Na₂CO₃: Na₂SO₄ ratio, concentration of lime milk and duration of the conversion process on this process was studied by identifying their optimal values. The study of the rheological properties of the reaction pulp showed that it is mobile and well filtered, which makes it possible to obtain rapidly settling large crystals of Na₂CO₃·2Na₂SO₄, Na …