Ergonomics Commons^™

Improving Production Flexibility, Christopher T. Patrick, Conrad R. Troutman, Adam Glassman, Kaitlin Payne

Faculty Publications and Other Works -- Industrial & Information Engineering

Over the last year, Clayton has paired with the University of Tennessee in order to increase production rates at their Rutledge facility due to a high demand for their homes. Other concerns expressed by Clayton included high employee turnover, fluctuation in demand throughout the year, and lack of space within the facility. Several teams from the University were assigned to this location with the goal of observing and increasing throughput and flexibility within the facility while considering the previously stated issues.

Smart Disease Prevention App: Informing The Public In Their Own Geographic Location, Apoorva Sulakhe, Shafali Rana, Zoe Disori, William Nogay, Kyle Plummer, Meredith Shannon, Morgan Young, Alyssa Zielinski, Vincent G. Duffy

Purdue Journal of Service-Learning and International Engagement

Apoorva Sulakhe and Shefali Rana are graduate students in the School of Industrial Engineering at Purdue. They have both been teaching assistants under their coauthor, Dr. Vincent Duffy, while supervising multiple projects. Coauthors Zoe Disori, William Nogay, Kyle Plummer, Meredith Shannon, Morgan Young, and Alyssa Zielinski are listed in alphabetical order. They were all seniors in School of Industrial Engineering at the time of this project in 2017. The purpose of their study, described in this article, was to develop an application to provide users with accurate information about diseases spreading in their geographic locations.

Evaluation And Validation Of Distraction Detection Algorithms On Multiple Data Sources, Shashank Mehrotra

Masters Theses

This study aims to evaluate algorithms designed to detect distracted driving. This includes the comparison of how efficiently they detect the state of distraction and likelihood of a crash. Four algorithms that utilize measures of cumulative glance, past glance behavior, and glance eccentricity were used to understand the distracted state of the driver and were validated on two separate data sources (i.e., simulator and naturalistic data). Additionally, an independent method for distraction detection was designed using data mining methods. This approach utilized measures like steering degree, lane offset, lateral and longitudinal velocity, and acceleration. The results showed a higher likelihood …

Identifying Criteria To Predict Army Rifle Marksmanship Proficiency, Katlin Makina Anglin

Doctoral Dissertations and Master's Theses

The United States Army requires each Soldier to develop marksmanship proficiency in an effort to achieve combat readiness. Soldiers currently develop marksmanship proficiency through Basic Rifle Marksmanship (BRM) training, but significant skill deficiencies are apparent at the end of training. These skill deficiencies remain throughout training because instructors rarely assess Soldiers objectively before the final qualification, reducing the opportunity for instructors to diagnose skill deficiencies until it is too late. Therefore, the goal of the current research is to identify individual differences and sensor-based performance measures for inclusion in a formative assessment during BRM training. The results of the current …

Effects Of Lighting And Noise On Performance And Situation Awareness In An Air Traffic Control Task, Saralee Pruksaritanon, Andrew Dattel Ph.D., Steven Hampton Ed.D.

National Training Aircraft Symposium (NTAS)

Work environment influences an individual’s performance and situation awareness (SA). This study aims to investigate the effects of lighting and noise levels on performance and situation awareness in an air traffic control (ATC) task. These two variables are important in the domain of ATC because the task requires an individual to receive and process information both visually and auditorily. The results are useful for designing air traffic control rooms, which are set differently among different air navigation service providers. The subjects are 16 students majoring in Air Traffic Management (ATM) at Embry-Riddle Aeronautical University (ERAU) – Daytona Beach, FL. The …

Developing An Ergonomic Model And Automation Justification For Industrial Spraying Operations: A Case Study, Anthony Woods

Industrial Engineering Undergraduate Honors Theses

Industrial spraying tasks prove to be some of the most dull, dirty, and dangerous jobs in the modern day. Although it is a ripe area for automation, justification methods do not typically account for the potential improvements in the ergonomics of a task from automating it. In addition, there is a gap in the ergonomics literature in formal methodologies to comprehensively evaluate an industrial spraying task ergonomically, including all relevant musculoskeletal elements. This research focuses on first developing a formal, comprehensive methodology for ergonomically evaluating industrial spraying tasks and attaining a final classification of the ergonomic ranking of the task. …

Ranking Of Human Senses In Relation To Different In-Flight Activities Contributing To The Comfort Experience Of Airplane Passengers, Joyce Bouwens, Suzanne Hiemstra-Van Mastrigt, Peter Vink

International Journal of Aviation, Aeronautics, and Aerospace

Bubb, Bengler, Grünen, and Vollrath (2015) identified six environmental comfort factors and ordered them from most important to least important (smell, light, vibrations, sound, climate and anthropometry). This paper attempts to verify whether this suggested order of comfort-related factors also applies to the expectations of aircraft passengers. For this purpose, two studies were carried out. First, a survey was conducted among 183 aircraft passengers between 19 and 64 years old. In this survey, respondents were asked to rank six comfort factors by selecting the most important factor from 15 pairs of factors (e.g. light versus smell). The respondents indicated anthropometry …

Implementation Of 5s At A Survey Laboratory In Western Kentucky University, Mercy Akunna Ebuetse

Masters Theses & Specialist Projects

5S is a technique used alongside methodologies such as lean, total quality management and six-sigma for continuous improvement and workplace standardization. Nonetheless, despite the upsurge in the implementation of 5S by lean manufacturing facilities and other industries, educational laboratories appear to be lagging. Taking into consideration the benefits of implementing 5S within industry, it has become crucial to replicate the technique in an educational laboratory to obtain equivalent results. To upgrade educational laboratories into industrial laboratories, 5S (sort, set in order, shine, standardize, and sustain) is required to improve the laboratory’s ergonomics that subsequently increases efficiency, productivity, and lessens waste …

Assessment Of Ergonomics In Indian Dental Practice: A Workplace Analysis, Divya Gadde

Masters Theses & Specialist Projects

Dental practice requires unique working conditions such as prolonged working hours, strained body postures and laborious, high finesse dental techniques. However, it can be more efficiently performed by the application of ergonomics, rather than physically forcing the worker's body to fit the job. Posture is highly influenced by factors such as inadequate working level, incorrect patient positioning, and poor visual comfort. In order to eliminate musculoskeletal disorders it is necessary to control these and other factors, and design the human work environment to be more ergonomic. The aim of this study was to assess ergonomics within Indian dental practice and …

Repeatability Case Study Of The 3d Printer In The School Of Engineering And Applied Science Lab, Naif Faleh S. Albaiji

Masters Theses & Specialist Projects

3DP (three-dimensional printing) technologies have become more than just a tool to help companies with prototyping and designing in the pre-production stage. Some firms have already implemented 3DP technology to produce parts and end-use products. However, there are several challenges and barriers that this technology must overcome to replace traditional manufacturing methods. One of the most significant obstacles associated with 3D printing is its low level of accuracy in variable repeatability when it comes to making separate batches of the same product. There are several arguable reasons behind this variation. Some of the factors that can influence repeatability are the …

Effect Of Anthropometric Variability On Middle-Market Aircraft Seating, Tara C. Sriram

International Journal of Aviation, Aeronautics, and Aerospace

A middle-of-market aircraft, or MoMA, is defined as an aircraft capable of flying 180-250 passengers without refueling for 2,300-5,800 miles(~2,000-5,000 nautical miles). As the name suggests, middle-of-market aircraft are positioned in between the market segments served by narrow body (single-aisle) and wide body (twin-aisle) aircraft. This paper presents the findings of a study on the effect of anthropomorphic variability on economy class seating on middle-market aircraft currently in service. The study found that among 130 middle-market LOPAs, the mean seat pitch was greater for US airlines than for Asian airlines. Furthermore, the sampled Asian airlines had a higher preference …

Smart Travel, Apoorva Sulakhe

Engagement & Service-Learning Summit

The purpose of this poster is to further explore the idea of a “SMART” travel app. To design an app that is self-monitoring, that could analyze data and present the best travel options for customers in terms of available providers, price and time. Not only should the app be beneficial to customers but it should also be beneficial to providers. Through a series of analysis, questionnaires and eye tracking experiments our team was able to design an app that will provide customers with the information needed to make a well-informed decision on how to travel from point A to B, …

Communication Based Control For Dc Microgrids, Mahmoud S. Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

Centralized communication-based control is one of the main methods that can be implemented to achieve autonomous advanced energy management capabilities in DC microgrids. However, its major limitation is the fact that communication bandwidth and computation resources are limited in practical applications. This can be often improved by avoiding redundant communications and complex computations. In this paper, an autonomous communication-based hybrid state/event driven control scheme is proposed. This control scheme is hierarchical and heuristic, such that on the primary control level, it encompasses state-driven local controllers, and on the secondary control level, an event-driven MG centralized controller (MGCC) is used. This …

Unmanned Aerial Systems: Research, Development, Education & Training At Embry-Riddle Aeronautical University, Michael P. Hickey

Publications

With technological breakthroughs in miniaturized aircraft-related components, including but not limited to communications, computer systems and sensors, state-of-the-art unmanned aerial systems (UAS) have become a reality. This fast-growing industry is anticipating and responding to a myriad of societal applications that will provide new and more cost-effective solutions that previous technologies could not, or will replace activities that involved humans in flight with associated risks.

Embry-Riddle Aeronautical University has a long history of aviation-related research and education, and is heavily engaged in UAS activities. This document provides a summary of these activities, and is divided into two parts. The first part …

Magic Triangle – Human, Exoskeleton, And Collaborative Robot Scenario, R. A. Goehlich, M. H. Rutsch, I. Krohne

Publications

The incidence of musculoskeletal disorders in workplaces with difficult ergonomic conditions is increasing. Today, there is a growing market for technical support systems that avoid repetitive strain on the musculoskeletal system. We have been observing two (parallel) lines of development: on the one hand, the development of exoskeletons supporting shop floor operators and, on the other hand, the development of collaborative robots for the creation of hybrid teams. The focus of our research is the combined application of exoskeletons AND collaborative robots for shop floor operators in the aerospace industry. Our approach is to analyze various scenarios to understand which …

Impact Of Sustainable Product Design On Elderly Ergonomics, Tris Kee, Alex King

Faculty of Design & Environment (THEi)

No abstract provided.

The Effect Of Task Load, Automation Reliability, And Environment Complexity On Uav Supervisory Control Performance, Sarah M. Sherwood

Doctoral Dissertations and Master's Theses

Over the last decade, military unmanned aerial vehicles (UAVs) have experienced exponential growth and now comprise over 40% of military aircraft. However, since most military UAVs require multiple operators (usually an air vehicle operator, payload operator, and mission commander), the proliferation of UAVs has created a manpower burden within the U.S. military. Fortunately, simultaneous advances in UAV automation have enabled a switch from direct control to supervisory control; future UAV operators will no longer directly control a single UAV subsystem but, rather, will control multiple advanced, highly autonomous UAVs. However, research is needed to better understand operator performance in a …

Ambulatory Clinic Exam Room Design With Respect To Computing Devices: A Laboratory Simulation Study, Dustin T. Weiler, Tyler Satterly, Shakaib U. Rehman, Maury A. Nussbaum, Neale R. Chumbler, Gary M. Fischer, Jason J. Saleem

Faculty Scholarship

Background—Challenges persist regarding how to integrate computing effectively into the exam room, while maintaining patient-centered care. Purpose—Our objective was to evaluate a new exam room design with respect to the computing layout, which included a wall-mounted monitor for ease of (re)-positioning. Methods—In a lab-based experiment, 28 providers used prototypes of the new and older “legacy” outpatient exam room layouts in a within-subject comparison using simulated patient encounters. We measured efficiency, errors, workload, patient-centeredness (proportion of time the provider was focused on the patient), amount of screen sharing with the patient, workflow integration, and provider situation awareness. Results—There were no statistically …