Operations Research, Systems Engineering and Industrial Engineering Commons^™

Acuta Enews June 1995, Vol. 24, No. 6

ACUTA Newsletters

In This Issue

Board report

President's message

Charles Co. Community College's telecommuting project

Brock's campus ID card

From ACUTA Headquarters

Effects Of Ergonomic Worksite Changes On Risks For Cumulative Trauma Disorders Of The Upper Body In An Assembly And Press Operation Job, David B. Mahone

Theses

Cumulative trauma of the upper body is associated with a variety of individual and job factors. An effort to optimize the human-hardware interface to minimize cumulative trauma is favored. Workers in a set of jobs had complained about hand/wrist and shoulder discomfort. One job was selected for testing alternate machine controls and worksite layout. Electromyography was used to test muscle activity, and photogoniometry was used to measure posture.

For the group of ten worker-subjects, statistically significant decreases in hand/wrist and shoulder muscle activity were found. A marginal, but significant increase in neck muscle activity was also found. When one subject …

Analysis Of A Design For Its Quality Manufacturability In Terms Of Misalignments And Fastener Related Problems, Abhinav Dhar

Theses

This study analyzes the relationship between design parameters established at the initial stage of the design process and the manufacturing quality problems that manifest themselves during production. Specifically, we study the relationship between design features and the occurrence of misalignment defects and fastener related problems.

This outcome of this work is a methodology, Design for Quality Manufacturability (DFQM). DFQM addresses the likelihood that defects will occur during the manufacture of a product in a standard plant. This is based on the premise that defects in assembled products are often influenced by some features of the design and/or assembly process. These …

Acuta Enews May 1995, Vol. 24, No. 5

ACUTA Newsletters

In This Issue

Board report

President's message

DC at a glance

Benchmarks for your telecom operation

From ACUTA Headquarters

A Robust Method Of Solving Nonlinear Boundary Value Problems Via Modified Compromise Programming, John L. Zornick

Theses and Dissertations

This study is an extension of Ng's previous work in which goal programming was used to determine an approximate solution to a boundary value problem. This approach follows the same basic approach developed by Ng in which the method of collocation was recast as a compromise programming model. Hence, instead of solving a system of simultaneous nonlinear equations, one seeks a compromise solution which minimizes (in a weighted residual sense) a vector norm of the differential equation residuals. A difference in this approach is that it makes use of a genetic algorithm as the optimizing engine as opposed to the …

Acuta Enews April 1995, Vol. 24, No. 4

ACUTA Newsletters

In This Issue

Board Report

President's message

DC at a glance

Directory updates

From ACUTA Headquarters

Development Of A Knowledge-Based System For Generating Process Plans Using Group Technology: A Study For Norfolk Naval Shipyard, William P. Keene Jr.

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to study and analyze the Norfolk Naval Shipyard's manufacturing methods of determining part families and generating part process plans for parts in the machine shop. A knowledge-based decision support system was designed based on knowledge acquired from machinist experts and documented sources of the Norfolk Naval Shipyard. The system interprets specific part information provided by the user, categorizes parts into part families and generates process plans to manufacture the parts. The system was evaluated and tested for parts provided by Norfolk Naval Shipyard.

Knowledge Acquisition And Structuring By Multiple Experts In A Group Support Systems Environment, Bernard Lee Lewis

Engineering Management & Systems Engineering Theses & Dissertations

This study addresses the impact of Group Decision Support Systems (GDSS) on expert system development by multiple Domain Experts. Current approaches to building expert systems rely heavily on knowledge acquisition and prototyping by a Knowledge Engineer working directly with the Domain Expert. Although the complexity of knowledge domains and new organizational approaches demand the involvement of multiple experts, standard procedures limit the ability of the Knowledge Engineer to work with more than one expert at a time.

Group Decision Support Systems offer a networked computerized environment for group work activities, in which multiple experts may express their ideas concurrently and …

Acuta Enews March 1995, Vol. 24, No. 3

ACUTA Newsletters

In This Issue

Board report

President's message

ACUTA hires Administrative

DC at a glance

Info Superhighway grant

From ACUTA Headquarters

A Discrete Single Server Queue With Markovian Arrivals And Phase Type Group Services, Attahiru Sule Alfa, K. Laurie Dolhun, Srinivas R. Chakravarthy

Industrial & Manufacturing Engineering Publications

We consider a single-server discrete queueing system in which arrivals occur according to a Markovian arrival process. Service is provided in groups of size no more than M customers. The service times are assumed to follow a discrete phase type distribution, whose representation may depend on the group size. Under a probabilistic service rule, which depends on the number of customers waiting in the queue, this system is studied as a Markov process. This type of queueing system is encountered in the operations of an automatic storage retrieval system. The steady-state probability vector is shown to be of (modified) matrix-geometric …

A Methodology To Generate Air Force Materiel Command Manpower Reduction Alternatives, Steven T. Bishop

Theses and Dissertations

The purpose of this study is to generate manpower authorization reduction alternatives for Air Force Materiel Command. The advent of low-cost personal computer software applications, such as Excel, has created an assessable tool with the ability to solve linear programming problems. This research examines the manpower resource reduction process of Air Force Materiel Command and models the Resources Allocation - Integrated Process Team (RA-IPT) decision process. A linear programming model is developed to assign these reduction through a weighted sum. The linear programming model is developed as a Microsoft Excel spreadsheet model, the Exercise Support Program (ESP), using Visual Basic …

Applications Of Statistical Process Control In Monitoring Aircrew Bombing Proficiency, Kirk G. Horton

Theses and Dissertations

The current tools used by squadron supervisors to monitor the bombing performance of aircrews flying F-111E aircraft are monthly reports that have little predictive capability. No real-time methodology exists for monitoring and predicting aircrew bombing performance and preventing bombing problems that might cause an individual to become unqualified. It has been suggested that Statistical process Control (SPC) can be applied to the bombing process to develop tools for managing the process, correcting problems, and improve the bombing performance of a squadron. This study investigates the application of SPC to the bombing process. It examines data taken from an F-111E Fighter …

Life-Cycle Cost Analysis For Radioactive Waste Remediation Alternatives, Thomas P. White, Ronald J. Toland, Dorian Y. Buitrago

Theses and Dissertations

This research has two primary objectives. The first is to develop a generic, interactive, spreadsheet-based life-cycle cost model that uses net present value and risk analysis techniques for cost comparison. The second is to apply the model specifically to the vitrification and cementation methods of waste remediation. By using spreadsheet analysis and graphics capabilities, the model will provide direct and objective comparisons of remediation alternatives. Since vitrification is a new technology, the plant design and operations are conceptual. Therefore, computer simulation and engineering judgement are integral to the vitrification LCC estimate.

Selecting Optimal Experiments For Feedforward Multilayer Perceptrons, Lisa M. Belue

Theses and Dissertations

Where should a researcher conduct experiments to provide training data for a multilayer perceptron? This question is investigated and a statistically-based method for optimally selecting experimental design points for multilayer perceptrons is introduced. Specifically, a criterion is developed based on the size of an estimated confidence ellipsoid for the weights in the multilayer perceptron. This criterion is minimized over a set of exemplars to find optimal design points. Initially, single output networks are examined. An example is used to demonstrate the superiority of optimally selected design points over randomly chosen points and points chosen in a grid pattern. Also, two …

The Development Of A Metamodel For A Major Weapon System Cost Model, Paul W. Campbell

Theses and Dissertations

Cost estimation is an integral part of the procurement process of major weapon systems. Despite this essential role, the cost estimation process is able to provide the decision makers and analysts with a limited amount of insight. This is due to the complex nature of the cost models that typically contain 20-30 cost estimating relationships (CERs) and 50-100 variables. In an effort to provide the decision makers and analysts with additional insight to the cost estimate, this research demonstrates a methodology that will (1) identify the cost drivers of the cost model, ( 2) estimate the effects of these cost …

Right-Hand-Side Multidimensional Optimality Analysis Of A Large Scale Linear Program Using Metamodelling Techniques, Osman Iyde

Theses and Dissertations

A methodology for optimality analysis of linear programs was developed by Johnson, Bauer, Moore, and Grant to create metamodels using response surface methodology techniques such as experimental design and least squares regression, and a geostatistical estimation technique, namely kriging. Metamodels have the form of a simple polynomial, and they predict the optimal objective function value of an LP for various levels of the constraints. They eliminate the necessity of determining which critical region contains the right-hand-side (RHS) vector of interest since they are valid over multiple critical regions. The methodology of Johnson, et al. can be applied to large scale …

Response Surface Methodology As A Sensitivity Tool In Decision Analysis, David A. Meyers

Theses and Dissertations

The purpose of this study is to evaluate response surface methodology as a sensitivity analysis tool in the area of decision analysis. The advent of low-cost personal computer software, such as DPLTM, has created an accessible tool with the ability to frame and solve influence diagrams for decision problems. This study provides a comparison of current sensitivity analysis techniques vs those made possible through response surface methodology (RSM). Sensitivity analysis alternatives are demonstrated on a decision problem concerning the evaluation of force structure options for the Department of Defense. Sensitivity analysis is performed on both one-way and two-way perturbations of …

A Methodology For Evaluating Military Systems In A Counterproliferation Role, Stanley Stafira Jr.

Theses and Dissertations

This thesis develops a methodology to evaluate how dissimilar military systems support the accomplishment of the United States? counterproliferation objectives. The overall scope is to develop a model of the counterproliferation decision process that enables systems to be evaluated against common criteria. By using decision analysis, an influence diagram model is developed which represents military activities in the counterproliferation process. The key questions which must be asked in evaluating counterproliferation systems are highlighted. An analysis of perfect intelligence, perfect defensive, and perfect offensive systems reveal that a perfect intelligence system provides the greatest potential to meet the United States' counterproliferation …

An Analytical Framework For Assessing Future Force Structure Requirements Under Uncertainty, Michael L. Fredley

Theses and Dissertations

The objective of this research was to develop an analytical framework to assess future force structure requirements under the major uncertainties inherent in the post-Cold War era. Among the uncertainties are the frequency and nature of future threats to U.S. interests and the cost of maintaining, building, and demobilizing forces. The centerpiece of the methodology is a computer model which simulates the development of threats to U.S. interests and the actions the U.S. takes to protect those interests. From this simulation, the costs and risks associated with different policy alternatives can be estimated. The simulation is set within a broader …

A Methodology For Comparing The Value Of Competing Afmc Manpower Allocation Strategies, Sandra K. Smith

Theses and Dissertations

This research effort develops a methodology for Air Force Materiel Command (AFMC) decision makers to use during mandated resource allocation exercises for comparing competing manpower allocation strategies. A value model is used to represent the hierarchical objectives of the command, with the primary objective being the attainment of maximum mission effectiveness in the face of constrained resources. Value model decomposition is patterned according to the command's organizational structure. Scoring functions derived using direct assessment survey techniques capture the relationship between manpower and mission effectiveness for lowest level organizations. An additive value function represents the model mathematically; the primary objective value …

The Effect Of Repeatedly Sampling An Embedded Metamodel On The Simulation Response, John Kent Patterson

Theses and Dissertations

This study investigated the effect on simulation output of repeatedly sampling an embedded metamodel. A metamodel is said to be embedded within a simulation if it is used to replace a submodule of that simulation. Replacing a deterministic module with an embedded deterministic metamodel poses no apparent mathematical problems. However, using a deterministic metamodel to replace a stochastic simulation component could require additional corrective actions. This research was performed in two phases. The first phase dealt with a set of tandem queues. It was shown that as each queue was sequentially replaced with a metamodel, the total system variance was …

Patient-Aircraft Forecasting For The Strategic Aeromedical Evacuation "Lift-Bed Process", Donald F. Kimminau

Theses and Dissertations

The goal of this research is to develop a tool for the Global Patient Movement Requirements Center (GPMRC) to efficiently forecast Aeromedical Evacuation (AE) aircraft and schedule patients in the lift-bed process. During a contingency, GPMRC is responsible for requesting required airlift, and providing lift-bed candidates to the Theater Patient Movement Requirements Center. The objective is to evacuate all waiting patients while minimizing the number of C-141 aircraft which must be dedicated to the AE mission. In the solution process, a short-term forecast of patient movement requirements is input, including number of patients, bed and aircraft availability, and hub preferences. …

Modeling Corps Artillery In A Theater Level Combat Model, Richard F. Bowyer

Theses and Dissertations

This thesis describes the development of a methodology to explicitly model corps artillery assets in the Joint Staff's Joint Stochastic Analysis Research (J-STOCHWAR) and to quantify Army doctrine that guides organization of artillery for combat. The methodology incorporates corps artillery into the J-STOCHWAR by using the five fundamentals for organizing for combat, which reflect Army doctrine, and combines them with basic concepts already used in existing theater-level models. Other aspects of the problem include determining the appropriate level of detail, identifying techniques to solve the problem, and verifying the results. The proposed decision analysis solution technique provides a feasible method …

A New Goodness-Of-Fit Test For The Gamma Distribution Based On Sample Spacings From Complete And Censored Samples, Huseyin Duman

Theses and Dissertations

This thesis studies a new goodness-of-fit test for the gamma distribution with known shape parameter. This test statistic, Z*, is based on spacings from complete or censored samples. The size of samples varied between 5 and 35. The critical value tables were generated for the Z* test statistic for complete and censored samples. The critical values were obtained for five different significance levels: 0.20 0.15, 0.10, 0.05, and 0.01. An extensive power study, containing 50,000 Monte Carlo runs was conducted using nine alternative distributions, H_a. It was observed that the Z* test statistic was more powerful against certain …

Dynamic Maintenance Scheduling For A Stochastic Telecommunication Network: Determination Of Performance Factors, Todd S. Patterson

Theses and Dissertations

This research proposes an analytical approach to access the relationship between maintenance facility location and communication network performance measurement using a selected dynamic maintenance scheduling protocol. There were three objectives established for this effort. The first objective was the determination of an upper-bound upon the level of performance for a telecommunication network using dynamically scheduled maintenance to evaluate maintenance depot location. This was achieved by using a two-stage algorithm, first locate a maintenance depot by using stochastic algorithms, and then to measure the resulting impact upon performance with a multi-commodity network flow model. The second objective was to develop the …

Estimation Of The Captive-Carry Survival Function For The Advanced Medium Range Air-To-Air Missile (Amraam), David R. Denhard

Theses and Dissertations

This thesis considers the problem of estimating the survival function of an item (probability that the item functions for a time greater than a given time t) from sampling data subject to partial right censoring (a portion of the items in the sampling data have not yet been observed to fail). Specifically the thesis describes several parametric and non-parametric statistical models that can be used when the sampling data is subject to partial right censoring. These models are applied to the case of estimating the captive-carry survival function of the AIM-120A Advanced Medium Range Air-to-Air Missile (AMRAAM).

Modified Goodness-Of-Fit Tests For The Inverse Gaussian Distribution With Two Unknown Parameter, Huseyin Gunes

Theses and Dissertations

Modified Kolmogorov- Smirnov (KS), Anderson-Darling (AD), Cramer-von Mises (CV), Kupier (V), and Watson (W) goodness-of-fit tests are generated for the inverse Gaussian distribution with unknown parameters. The inverse Gaussian parameters are estimated by maximum likelihood estimation. A Monte Carlo simulation of 50,000 repetitions is used to generate critical values for sample sizes of 5 through 50 with an increment of five, sample sizes of 60 through 100 with an increment of 10, and 24 different values of the inverse Gaussian shape parameter. A 50,000-repetition Monte Carlo power study is carried out using data with sample sizes of 5 through 100 …

Acuta Enews February 1995, Vol. 24, No. 2

ACUTA Newsletters

In This Issue

Board Report

President's message

ACUTA hires Computer Services Administrator

Peer presentations at Maui

DC at a glance

From ACUTA Headquarters

Merits Of The Production Volume Based Similarity Coefficient In Machine Cell Formation, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

In this paper, two types of similarity coefficients are compared: (1) the Jaccard's coefficient and (2) the production volume based coefficient. Each is used to form a cellular manufacturing system whose performance will be used as a measure of effectiveness of the similarity coefficient. The sum of intercellular and intracellular material handling costs is used as a criterion for performance evaluation.

Creep Fatigue, Part Iii: Diercks Equation: Modification And Applicability, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Creep-fatigue data of low allow steels were compiled from international sources, and trends in creep-fatigue behavior were identified in Paper I. Methods of life prediction and their trends were examined in Paper II with respect to compiled data. Diercks equation, a multivariate creep-fatigue life extrapolation equation, for SS, 304, in terms of strain range, temperature, hold time and strain rate parameters is modified and extended to the life prediction of low alloy steels in this paper.