Nanoscience and Nanotechnology Commons^™

Rapid Characterization Of Local Shape Memory Properties Through Indentation, Peizhen Li, Haluk E. Karaca, Yang-Tse Cheng

Mechanical Engineering Faculty Publications

Shape memory alloys (SMAs) have the ability to show large recoverable shape changes upon temperature, stress or magnetic field cycling. Their shape memory, material and magnetic properties (e.g. transformation temperatures, strain, saturation magnetization and strength) determine their prospects for applications from small-scale microelectromechanical systems to large scale aerospace and biomedical systems. It should be noted that properties of SMAs are highly temperature dependent. Generally, the conventional mechanical characterization methods (e.g, tension, compression, and torsion) are used on bulk samples of SMAs to determine those properties. In this article, it will be shown that indentation technique can be used as an …

Optical And Electronic Properties Of Femtosecond Laser-Induced Sulfur-Hyperdoped Silicon N+/P Photodiodes, Ting Zhang, Bohan Liu, Waseem Ahmad, Yaoyu Xuan, Xiangxiao Ying, Zhijun Liu, Zhi David Chen, Shibin Li

Electrical and Computer Engineering Faculty Publications

Impurity-mediated near-infrared (NIR) photoresponse in silicon is of great interest for photovoltaics and photodetectors. In this paper, we have fabricated a series of n⁺/p photodetectors with hyperdoped silicon prepared by ion-implantation and femtosecond pulsed laser. These devices showed a remarkable enhancement on absorption and photoresponse at NIR wavelengths. The device fabricated with implantation dose of 10¹⁴ ions/cm² has exhibited the best performance. The proposed method offers an approach to fabricate low-cost broadband silicon-based photodetectors.

Size And Shape Distributions Of Primary Crystallites In Titania Aggregates, Eric A. Grulke, Kazuhiro Yamamoto, Kazuhiro Kumagai, Ines Häusler, Werner Österle, Erik Ortel, Vasile-Dan Hodoroaba, Scott C. Brown, Christopher Chan, Jiwen Zheng, Kenji Yamamoto, Kouji Yashiki, Nam Woong Song, Young Heon Kim, Aleksandr B Stefaniak, D. Schwegler-Berry, Victoria A. Coleman, Åsa K. Jämting, Jan Herrmann, Toru Arakawa, Woodrow W. Burchett, Joshua W. Lambert, Arnold J. Stromberg

Chemical and Materials Engineering Faculty Publications

The primary crystallite size of titania powder relates to its properties in a number of applications. Transmission electron microscopy was used in this interlaboratory comparison (ILC) to measure primary crystallite size and shape distributions for a commercial aggregated titania powder. Data of four size descriptors and two shape descriptors were evaluated across nine laboratories. Data repeatability and reproducibility was evaluated by analysis of variance. One-third of the laboratory pairs had similar size descriptor data, but 83% of the pairs had similar aspect ratio data. Scale descriptor distributions were generally unimodal and were well-described by lognormal reference models. Shape descriptor distributions …

Realizing Full Coverage Of Stable Perovskite Film By Modified Anti-Solvent Process, Long Ji, Ting Zhang, Yafei Wang, Peng Zhang, Detao Liu, Zhi David Chen, Shibin Li

Electrical and Computer Engineering Faculty Publications

Lead-free solution-processed solid-state photovoltaic devices based on formamidinium tin triiodide (FASnI₃) and cesium tin triiodide (CsSnI₃) perovskite semiconductor as the light harvester are reported. In this letter, we used solvent engineering and anti-solvent dripping method to fabricate perovskite films. SnCl₂ was used as an inhibitor of Sn⁴⁺ in FASnI₃ precursor solution. We obtained the best films under the function of toluene or chlorobenzene in anti-solvent dripping method and monitored the oxidation of FASnI₃ films in air. We chose SnF₂ as an additive of CsSnI₃ precursor solution to prevent the oxidation …

Catalyzed Synthesis Of Zinc Clays By Prebiotic Central Metabolites, Marcelo I. Guzman, Ruixin Zhou, Kaustuv Basu, Hyman Hartman, Christopher J. Matocha, S. Kelly Sears, Hajatollah Vali

Chemistry Faculty Publications

How primordial metabolic networks such as the reverse tricarboxylic acid (rTCA) cycle and clay mineral catalysts coevolved remains a mystery in the puzzle to understand the origin of life. While prebiotic reactions from the rTCA cycle were accomplished via photochemistry on semiconductor minerals, the synthesis of clays was demonstrated at low temperature and ambient pressure catalyzed by oxalate. Herein, the crystallization of clay minerals is catalyzed by succinate, an example of a photoproduced intermediate from central metabolism. The experiments connect the synthesis of sauconite, a model for clay minerals, to prebiotic photochemistry. We report the temperature, pH, and concentration dependence …

Enhanced Performance Of Planar Perovskite Solar Cells Using Low-Temperature Solution-Processed Al-Doped Sno2 As Electron Transport Layers, Hao Chen, Detao Liu, Yafei Wang, Chenyun Wang, Ting Zhang, Peng Zhang, Hojjatollah Sarvari, Zhi Chen, Shibin Li

Electrical and Computer Engineering Faculty Publications

Lead halide perovskite solar cells (PSCs) appear to be the ideal future candidate for photovoltaic applications owing to the rapid development in recent years. The electron transport layers (ETLs) prepared by low-temperature process are essential for widespread implementation and large-scale commercialization of PSCs. Here, we report an effective approach for producing planar PSCs with Al³⁺ doped SnO₂ ETLs prepared by using a low-temperature solution-processed method. The Al dopant in SnO₂ enhanced the charge transport behavior of planar PSCs and increased the current density of the devices, compared with the undoped SnO₂ ETLs. Moreover, the enhanced electrical …

Electronic Properties Of A New All-Inorganic Perovskite Tlpbi3 Simulated By The First Principles, Zhao Liu, Ting Zhang, Yafei Wang, Chenyun Wang, Peng Zhang, Hojjatollah Sarvari, Zhi Chen, Shibin Li

Electrical and Computer Engineering Faculty Publications

All-inorganic perovskites have been recognized as promising photovoltaic materials. We simulated the perovskite material of TlPbI₃ using ab initio electronic structure calculations. The band gap of 1.33 eV is extremely close to the theoretical optimum value. Compared TlPbI₃ with CsPbI₃, the total energy (−3980 eV) of the former is much lower than the latter. The partial density of states (PDOS) of TlPbI₃ shows that a strong bond exists between Tl and I, resulting in the lower total energy and more stable existence than CsPbI₃.

Focused Electron Beam Induced Deposition Of Copper With High Resolution And Purity From Aqueous Solutions, Samaneh Esfandiarpour, Lindsay Boehme, J. Todd Hastings

Electrical and Computer Engineering Faculty Publications

Electron-beam induced deposition of high-purity copper nanostructures is desirable for nanoscale rapid prototyping, interconnection of chemically synthesized structures, and integrated circuit editing. However, metalorganic, gas-phase precursors for copper introduce high levels of carbon contamination. Here we demonstrate electron beam induced deposition of high-purity copper nanostructures from aqueous solutions of copper sulfate. The addition of sulfuric acid eliminates oxygen contamination from the deposit and produces a deposit with ~95 at% copper. The addition of sodium dodecyl sulfate (SDS), Triton X-100, or polyethylene glycole (PEG) improves pattern resolution and controls deposit morphology but leads to slightly reduced purity. High resolution nested lines …

Intracellular Nanoparticle Dynamics Affected By Cytoskeletal Integrity, Martha E. Grady, Emmabeth Parrish, Matthew A. Caporizzo, Sarah C. Seeger, Russell J. Composto, David M. Eckmann

Mechanical Engineering Faculty Publications

The cell interior is a crowded chemical space, which limits the diffusion of molecules and organelles within the cytoplasm, affecting the rates of chemical reactions. We provide insight into the relationship between non-specific intracellular diffusion and cytoskeletal integrity. Quantum dots entered the cell through microinjection and their spatial coordinates were captured by tracking their fluorescence signature as they diffused within the cell cytoplasm. Particle tracking revealed significant enhancement in the mobility of biocompatible quantum dots within fibrosarcoma cells versus their healthy counterparts, fibroblasts, as well as in actin destabilized fibroblasts versus untreated fibroblasts. Analyzing the displacement distributions provided insight into …

Recent Advances On Iron Oxide Magnetic Nanoparticles As Sorbents Of Organic Pollutants In Water And Wastewater Treatment, Angela M. Gutierrez, Thomas D. Dziubla, J. Zach Hilt

Superfund Research Center Faculty Publications

The constant growth in population worldwide over the past decades continues to put forward the need to provide access to safe, clean water to meet human needs. There is a need for cost-effective technologies for water and wastewater treatment that can meet the global demands and the rigorous water quality standards and at the same maximizing pollutant efficiency removal. Current remediation technologies have failed in keeping up with these factors without becoming cost-prohibitive. Most recently, nanotechnology has been sought as the best alternative to increase access to water supplies by remediating those already contaminated and offering ways to access unconventional …

Single Molecule-Level Study Of Donor-Acceptor Interactions And Nanoscale Environment In Blends, Nicole Quist, Rebecca Grollman, Jeremy Rath, Alex Robertson, Michael Haley, John E. Anthony, Oksana Ostroverkhova

Chemistry Faculty Publications

Organic semiconductors have attracted considerable attention due to their applications in low-cost (opto)electronic devices. The most successful organic materials for applications that rely on charge carrier generation, such as solar cells, utilize blends of several types of molecules. In blends, the local environment strongly influences exciton and charge carrier dynamics. However, relationship between nanoscale features and photophysics is difficult to establish due to the lack of necessary spatial resolution. We use functionalized fluorinated pentacene (Pn) molecule as single molecule probes of intermolecular interactions and of the nanoscale environment in blends containing donor and acceptor molecules. Single Pn donor (D) molecules …

Efficient Planar Heterojunction Perovskite Solar Cells With Li-Doped Compact Tio2 Layer, Detao Liu, Shibin Li, Peng Zhang, Yafei Wang, Rui Zhang, Hojjatollah Sarvari, Feng Wang, Jiang Wu, Zhiming Wang, Zhi Chen

Electrical and Computer Engineering Faculty Publications

Perovskite solar cells (PSCs) have been developed rapidly in recent time, and efficient planar PSCs are regarded as the most promising alternative to the Si solar cells. In this study, we demonstrated that Li-doping of compact TiO₂ can reduce the density of electron traps and increase the conductivity of the electron transport layer (ETL) of PSCs. Due to the improved electronic property of ETL, the Li-doped compact TiO₂ based planar heterojunction PSCs exhibit negligible hysteretic J-V behavior. Comparing with the undoped compact TiO₂ based PSCs, the power conversion efficiency (PCE) of the Li-doped compact TiO₂ film …

Deconvolving The Steps To Control Morphology, Composition, And Structure, In The Synthesis Of High-Aspect-Ratio Metal Oxide Nanomaterials, Lei Yu

Theses and Dissertations--Chemistry

Metal oxides are of interest not only because of their huge abundance but also for their many applications such as for electrocatalysts, gas sensors, diodes, solar cells and lithium ion batteries (LIBs). Nano-sized metal oxides are especially desirable since they have larger surface-to-volume ratios advantageous for catalytic properties, and can display size and shape confinement properties such as magnetism. Thus, it is very important to explore the synthetic methods for these materials. It is essential, therefore, to understand the reaction mechanisms to create these materials, both on the nanoscale, and in real-time, to have design control of materials with desired …

Tunable Nanocomposite Membranes For Water Remediation And Separations, Sebastián Hernández Sierra

Theses and Dissertations--Chemical and Materials Engineering

Nano-structured material fabrication using functionalized membranes with polyelectrolytes is a promising research field for water pollution, catalytic and mining applications. These responsive polymers react to external stimuli like temperature, pH, radiation, ionic strength or chemical composition. Such nanomaterials provide novel hybrid properties and can also be self-supported in addition to the membranes.

Polyelectrolytes (as hydrogels) have pH responsiveness. The hydrogel moieties gain or lose protons based on the pH, displaying swelling properties. These responsive materials can be exploited to synthesize metal nanoparticles in situ using their functional groups, or to immobilize other polyelectrolytes and biomolecules. Due to their properties, these …

Utilization Of Bio-Renewable Lignin In Building High Capacity, Durable, And Low-Cost Silicon-Based Negative Electrodes For Lithium-Ion Batteries, Tao Chen

Theses and Dissertations--Chemical and Materials Engineering

Silicon-based electrodes are the most promising negative electrodes for the next generation high capacity lithium ion batteries (LIB) as silicon provides a theoretical capacity of 3579 mAh g^-1, more than 10 times higher than that of the state-of-the-art graphite negative electrodes. However, silicon-based electrodes suffer from poor cycle life due to large volume expansion and contraction during lithiation/delithiation. In order to improve the electrochemical performance a number of strategies have been employed, such as dispersion of silicon in active/inactive matrixes, devising of novel nanostructures, and various coatings for protection. Amongst these strategies, silicon-carbon coating based composites are one …

Fast Diffusion Of Silver In Tio2 Nanotube Arrays, Wanggang Zhang, Yiming Liu, Diaoyu Zhou, Hui Wang, Wei Liang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Using magnetron sputtering and heat treatment, Ag@TiO₂ nanotubes are prepared. The effects of heat-treatment temperature and heating time on the evolution of Ag nanofilms on the surface of TiO₂ nanotubes and microstructure of Ag nanofilms are investigated by X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. Ag atoms migrate mainly on the outmost surface of the TiO₂ nanotubes, and fast diffusion of Ag atoms is observed. The diffusivity for the diffusion of Ag atoms on the outmost surface of the TiO₂ nanotubes at 400 °C is 6.87 × 10⁻¹⁸ m²/s, …

Synthesis Of Titania Thin Films With Controlled Mesopore Orientation: Nanostructure For Energy Conversion And Storage, Suraj R. Nagpure

Theses and Dissertations--Chemical and Materials Engineering

This dissertation addresses the synthesis mechanism of mesoporous titania thin films with 2D Hexagonal Close Packed (HCP) cylindrical nanopores by an evaporation-induced self-assembly (EISA) method with Pluronic surfactants P123 and F127 as structure directing agents, and their applications in photovoltaics and lithium ion batteries. To provide orthogonal alignment of the pores, surface modification of substrates with crosslinked surfactant has been used to provide a chemically neutral surface. GISAXS studies show not only that aging at 4°C facilitates ordered mesostructure development, but also that aging at this temperature helps to provide orthogonal orientation of the cylindrical micelles which assemble into an …

Peptide-Functionalized Magnetic Nanoparticles For Cancer Therapy Applications, Anastasia K. Hauser

Theses and Dissertations--Chemical and Materials Engineering

Lung cancer is one of the leading causes of cancer deaths in the United States. Radiation and chemotherapy are conventional treatments, but they result in serious side effects and the probability of tumor recurrence remains high. Therefore, there is an increasing need to enhance the efficacy of conventional treatments. Magnetic nanoparticles have been previously studied for a variety of applications such as magnetic resonance imaging contrast agents, anemia treatment, magnetic cell sorting and magnetically mediated hyperthermia (MMH). In this work, dextran coated iron oxide nanoparticles were developed and functionalized with peptides to target the nanoparticles to either the extracellular matrix …

Thermodynamics And Kinetics Of The Three-Way Junction Of Phi29 Motor Prna And Its Assembly Into Nanoparticles For Therapeutic Delivery To Prostate Cancer, Daniel W. Binzel

Theses and Dissertations--Pharmacy

The emerging field of RNA nanotechnology necessitates creation of functional RNA nanoparticles, but has been limited by particle instability. Previously, it was found the three-way junction (3WJ) of the Phi29 DNA packaging motor pRNA was found to be ultra-stable and assemble in solution without the presence of metal ions. The three-way junction is composed of three short oligo RNA strands and proven to be thermodynamically stable. Here the assembly mechanism, thermodynamic and enzymatic stabilities, and kinetics are examined in order to understand the stability behind this unique motif. Thermodynamic and kinetics studies found that the pRNA 3WJ formed out of …

Biomimetic Oral Mucin From Polymer Micelle Networks, Sundar Prasanth Authimoolam

Theses and Dissertations--Chemical and Materials Engineering

Mucin networks are formed by the complexation of bottlebrush-like mucin glycoprotein with other small molecule glycoproteins. These glycoproteins create nanoscale strands that then arrange into a nanoporous mesh. These networks play an important role in ensuring surface hydration, lubricity and barrier protection. In order to understand the functional behavior in mucin networks, it is important to decouple their chemical and physical effects responsible for generating the fundamental property-function relationship. To achieve this goal, we propose to develop a synthetic biomimetic mucin using a layer-by-layer (LBL) deposition approach. In this work, a hierarchical 3-dimensional structures resembling natural mucin networks was generated …

Cnt Membrane Platforms For Transdermal Drug Delivery And Aptamer Modulated Transport, Tao Chen

Theses and Dissertations--Chemical and Materials Engineering

CNT membrane platforms are biomimetic polymeric membranes imbedded with carbon nanotubes which show fast fluid flow, electric conductivity, and the ability to be grafted with chemistry. A novel micro-dialysis probe nicotine concentration sampling technique was proposed and proved in vitro, which could greatly improve the efficiency and accuracy of future animal transdermal studies. To enhance the scope of transdermal drug delivery which was limited to passive diffusion of small, potent lipophilic drugs, a wire mesh lateral electroporation design was also proposed which could periodically disrupt the skin barrier and enhance drug flux.

It was shown that AMP binding aptamer …

Addressing Public Health Risks Of Persistent Pollutants Through Nutritional Modulation And Biomimetic Nanocomposite Remediation Platforms, Bradley J. Newsome

Theses and Dissertations--Chemistry

Due to their relative chemical stability and ubiquity in the environment, chlorinated organic contaminants such as polychlorinated biphenyls (PCBs) pose significant health risks and enduring remediation challenges. Engineered nanoparticles (NPs) provide a novel platform for sensing/remediation of these toxicants, in addition to the growing use of NPs in many industrial and biomedical applications, but there remains concern for their potential long-term health effects. Research highlighted herein also represents a transdisciplinary approach to address human health challenges associated with exposure to PCBs and NPs. The objectives of this dissertation research are two-fold, 1) to develop effective methods for capture/sensing and remediation …

Fabrication Of Magnetic Two-Dimensional And Three-Dimensional Microstructures For Microfluidics And Microrobotics Applications, Hui Li

Theses and Dissertations--Mechanical Engineering

Micro-electro-mechanical systems (MEMS) technology has had an increasing impact on industry and our society. A wide range of MEMS devices are used in every aspects of our life, from microaccelerators and microgyroscopes to microscale drug-delivery systems. The increasing complexity of microsystems demands diverse microfabrication methods and actuation strategies to realize. Currently, it is challenging for existing microfabrication methods—particularly 3D microfabrication methods—to integrate multiple materials into the same component. This is a particular challenge for some applications, such as microrobotics and microfluidics, where integration of magnetically-responsive materials would be beneficial, because it enables contact-free actuation. In addition, most existing microfabrication methods …

Reference Compensation For Localized Surface-Plasmon Resonance Sensors, Neha Nehru

Theses and Dissertations--Electrical and Computer Engineering

Noble metal nanoparticles supporting localized surface plasmon resonances (LSPR) have been extensively investigated for label free detection of various biological and chemical interactions. When compared to other optical sensing techniques, LSPR sensors offer label-free detection of biomolecular interactions in localized sensing volume solutions. However, these sensors also suffer from a major disadvantage – LSPR sensors remain highly susceptible to interference because they respond to both solution refractive index change and non-specific binding as well as specific binding of the target analyte. These interactions can severely compromise the measurement of the target analyte in a complex unknown media and hence limit …

The Critical Role Of Mechanism-Based Models For Understanding And Predicting Liposomal Drug Loading, Binding And Release Kinetics, Sweta Modi

Theses and Dissertations--Pharmacy

Liposomal delivery systems hold considerable promise for improvement of cancer therapy provided that critical formulation design criteria can be met. The main objective of the current project was to enable quality by design in the formulation of liposomal delivery systems by developing comprehensive, mechanism-based mathematical models of drug loading, binding and release kinetics that take into account not only the therapeutic requirement but the physicochemical properties of the drug, the bilayer membrane, and the intraliposomal microenvironment.

Membrane binding of the drug affects both drug loading and release from liposomes. The influence of bilayer composition and phase structure on the partitioning …

Influence Of Surface Modification On Properties And Applications Of Complex Engineered Nanoparticles, Binghui Wang

Theses and Dissertations--Chemical and Materials Engineering

Complex engineered nanoparticles (CENPs) are being used on various applications. Their properties are different from those of neat nanoparticles. The dissertation explores these differences from four aspects: 1) Modify carbon nanomaterials’ inert surfaces and investigate the effect on thermal and rheological behavior of their dispersions; 2) Generate self-assembly bi-layer structure of oxide nanoparticles via surface modification; 3) Study interaction between lysozyme and different surface-charged ceria nanoparticles; 4) Investigate the biodistribution and transformations of CENPs in biological media.

An environment-friendly surface modification was developed to modify surfaces of carbon nanomaterials for increasing their affinity to non-polar fluid. It can offset formation …

Transformations, Bioavailability And Toxicity Of Manufactured Zno Nanomaterials In Wastewter, Sewwandi Rathnayake

Theses and Dissertations--Plant and Soil Sciences

In order to properly evaluate the ecological and human health risks of ZnO Manufactured nanomaterials (MNMs) released to the environment, it is critical to understand the likely transformation products in the wastewater treatment process and in soils receiving biosolids. To address this critical knowledge gap, we examined the transformation reactions of 30 nm ZnO MNMs in single component and multi-component systems, with phosphate and natural organic matter (NOM). We also assessed the influence of nano ZnO transformation on the bioavailability, and toxicity of ZnO transformation products to Triticum aestivum. The data revealed that ZnO MNMs react with phosphate at …

Near Wall Shear Stress Modification Using An Active Piezoelectric Nanowire Surface, Christopher R. Guskey

Theses and Dissertations--Mechanical Engineering

An experimental study was conducted to explore the possible application of dynamically actuated nanowires to effectively disturb the wall layer in fully developed, turbulent channel flow. Actuated nanowires have the potential to be used for the mixing and filtering of chemicals, enhancing convective heat transfer and reducing drag. The first experimental evidence is presented suggesting it is possible to manipulate and subsequently control turbulent flow structures with active nanowires. An array of rigid, ultra-long (40 μm) TiO₂ nanowires was fabricated and installed in the bounding wall of turbulent channel flow then oscillated using an attached piezoelectric actuator. Flow velocity …

Numerical Modeling And Characterization Of Vertically Aligned Carbon Nanotube Arrays, Johnson Joseph

Theses and Dissertations--Mechanical Engineering

Since their discoveries, carbon nanotubes have been widely studied, but mostly in the forms of 1D individual carbon nanotube (CNT). From practical application point of view, it is highly desirable to produce carbon nanotubes in large scales. This has resulted in a new class of carbon nanotube material, called the vertically aligned carbon nanotube arrays (VA-CNTs). To date, our ability to design and model this complex material is still limited. The classical molecular mechanics methods used to model individual CNTs are not applicable to the modeling of VA-CNT structures due to the significant computational efforts required. This research is to …

Ultrastable Synergistic Tetravalent Rna Nanoparticles For Targeting To Cancers, Farzin Haque, Dan Shu, Yi Shu, Luda S. Shlyakhtenko, Piotr G. Rychahou, B. Mark Evers, Peixuan Guo

Pharmaceutical Sciences Faculty Publications

One of the advantages of nanotechnology is the feasibility to construct therapeutic particles carrying multiple therapeutics with defined structure and stoichiometry. The field of RNA nanotechnology is emerging. However, controlled assembly of stable RNA nanoparticles with multiple functionalities which retain their original role is challenging due to refolding after fusion. Herein, we report the construction of thermodynamically stable X-shaped RNA nanoparticles to carry four therapeutic RNA motifs by self-assembly of reengineered small RNA fragments. We proved that each arm of the four helices in the X-motif can harbor one siRNA, ribozyme, or aptamer without affecting the folding of the central …