Manufacturing Commons^™

Additive Manufacturing For Medical Education, Michael Noon

College of Engineering Summer Undergraduate Research Program

A growing body of evidence is suggesting that anatomical knowledge, the keystone of many medical specialties, is suffering among new graduates. While a host of reasons are provided, one common thread that many point to is the decline of cadaver dissections in the classroom. Many virtual audio-visual tools are used to address this gap, yet evidence has shown their ineffectiveness. Given this gap, the high degree of flexibility found in additive manufacturing (AM), and the many uses AM has already found in the medical field, we propose its use to fill this gap, allowing for students to learn with touch …

Empowering Student Success: Unlocking The Potential Of Project-Based Steel Design Education, Aly Mousaad Aly

Faculty Publications

In the pursuit of student success, it is essential to acknowledge that a singular teaching style does not universally cater to all students. The educator's crucial role lies in creating an optimal learning environment that fosters students' endeavors to excel. This endeavor transcends mere classroom success or employment prospects, encompassing a broader impact on societal well-being. An experiential learning approach, where students actively engage in practical tasks, emerges as the most effective mode of instruction. Integrating project-based learning activities into the curriculum holds immense potential for enhancing student learning. Additionally, the utilization of analysis software tools like FTool and STAAD …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

A Qualitative Look Into Repair Practices, Jumana Labib

Undergraduate Student Research Internships Conference

This research poster is based on a working research paper which moves beyond the traditional scope of repair and examines the Right to Repair movement from a smaller, more personal lens by detailing the 6 categorical impediments as dubbed by Dr. Alissa Centivany (design, law, economic/business strategy, material asymmetry, informational asymmetry, and social impediments) have continuously inhibited repair and affected repair practices, which has consequently had larger implications (environmental, economic, social, etc.) on ourselves, our objects, and our world. The poster builds upon my research from last year (see "The Right to Repair: (Re)building a better future"), this time pulling …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

El Español En Estados Unidos Como Recurso Para La Educación De Hispanos En Ingeniería, Hiram Moya

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Los Hispanos representan la más grande minoría en Estados Unidos. Sin embargo, el número de estudiantes hispanos en las carreras de ciencias y en particular en ingeniería ha estado subrepresentada por muchos años. Esta falta de representación ha hecho que se estudie de muchas formas los métodos de reclutar y retener y graduar estudiantes hispanos en ingeniería. Sin embargo, la urgencia continúa. Existen muchos retos para mejorar la participación de hispanos en ingeniería, incluyendo la falta costumbre en preguntar o solicitar ayuda, los retos económicos, y la falta de ejemplos a seguir en la facultad. Dado los retos, este artículo …

Embedding Computer Simulation Based Classroom Activities To Enhance The Learning Experience For Manufacturing Systems, Tzu-Liang Bill Tseng, Md Fashiar Rahman, Richard Chiou, Ivan Arturo Renteria-Marquez, Aditya Akundi, Amit J. Lopes, Jeevarathinam Senthilkumar

Manufacturing & Industrial Engineering Faculty Publications and Presentations

In recent time, manufacturing environment are bracing higher end technologies to achieve high productivity, efficiency and effectiveness. Due to the adoption of the sophisticated technologies, the system is becoming very complex and stochastic. Moreover, the manufacturing system is interconnected among its different subsystems and components, which cannot be described only through the theoretical explanation. Here, computer simulation can be integrated to design and visualize the stochastic and complex system. This paper uses the advantage of simulation to describe a series classroom activity using SIMIO software, which are deployed in industrial systems simulation course in the University of Texas at El …

Expanding Engineering And Technology Opportunities To Students In The Border Region Through International Collaboration, Jesus A. Gonzalez-Rodriguez, Immanuel Edinbarough, Adriana Rios-Santiago, Anabel Pineda-Briseno

Manufacturing & Industrial Engineering Faculty Publications and Presentations

Expanding Engineering and Technology Opportunities to Students in the Border Region through International Collaboration

For some years now, our Department of Engineering Technology of the XXXX, has collaborated with Universities across the southern border to carry out different activities such as undergraduate research, collaborative course-based projects, and senior design projects. We have observed how students benefit from being exposed to work in multidisciplinary and multicultural teams.

We now expand this form of work to a higher-level research collaboration where students and faculty from four different institutions participate. Two institutions of higher education in Mexico and a University and a Community …

Tabletop Mechanical Tester, Jamie Dombroski, Brian English, Richard Leffler, Andrew Shirk

Williams Honors College, Honors Research Projects

The need for hands-on and face-to-face experiences in the engineering classroom is very great. The equations, principles, and concepts can all be learned, but without the visual and tactile application, these don’t always sink in or become concrete. A small-scale tensile test machine was designed, sourced, manufactured, and tested for the purpose of being applied in classroom settings to provide this experience to engineering students. Extensive research was performed concerning tensile machines on the market, the essential elements of which are the load cell, grips, crosshead, extensometer, motor, and frame. The raw materials for the frame were purchased and drawings …

Design And Implementation Of A Virtual Reality Laboratory For Mechanical Maintenance, Adolfo Enrique Samudio Cano

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Adolfo Enrique Samudio Cano on April 27, 2018.

Analysis Of Tool Wear And Tool Life Of Cutting Tool Inserts Using Statistical Process Control Charts: A Case Study, Evan R. Ferrell

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Evan R. Ferrell on April 28, 2017.

Lean Process Improvement And Quality Analysis For Performance Rework, Paula R. Sloas

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the degree of Master of Science by Paula R. Sloas on April 19, 2017

Merging Creative Design And Cad Learning Activities In A Product Design Programme, Pearl O'Rourke, Colm O'Kane, Leslie Smith, Michael Ring

Conference Papers

Traditional learning and teaching methods for creativity differ from those used in a scientific context. Although the creative process can benefit from a certain level of prescription and structural constraint - with time allocated to research, problem definition, conceptualisation and idea development - flexibility and fluidity are necessary for creative innovation. In contrast, the more linear and rigid pedagogies associated with science and engineering education facilitate efficient learning of subjects such as those based on software packages, manufacturing and materials theory or mechanics. This paper describes the development of a project which aims to establish constructive links between the learning …

Exploration Station Kidshake Table, Jeremy Duhe, Philip Hopkins, Matt Ostiguy, Samantha Weiner

Mechanical Engineering

The KIDShake Table is an all mechanical earthquake shake table sponsored by the Exploration Station Children's Museum of Grover Beach. This interactive exhibit has two working mechanisms, a hand crank and pull rope, that provide two axis movement for knocking down block structures. This table was built and designed for a target age of 10 years.

Inhibition Of Bacillus Cereus Growth By Bacteriocin Producing Bacillus Subtilis Isolated From Fermented Baobab Seeds (Maari) Is Substrate Dependent, Donatien Kaboré, Dennis S. Nielsen, Hagrétoui Sawadogo-Lingan, Bréhima Diawara, Mamoudou H. Dicko Prof., Mogens Jakobsen, Line Thorsen

Pr. Mamoudou H. DICKO, PhD

Comparison Of Phenolic Compounds And Antioxidant Capacities Of Traditional Sorghum Beers With Other Alcoholic Beverages, Fatouma Abdoul-Latif, Romaric G. Bayili, Louis C. Obame, Mamoudou H. Dicko Prof.

Pr. Mamoudou H. DICKO, PhD

Thirty samples of sorghum beers “dolo” were selected from traditionally fermented household manufacturers from Burkina Faso. Dolo samples were screened for their total phenolic content, proanthocyanidins and putative antioxidant capacities, and were compared with industrial beers and wines. Total phenols were measured using the Folin-Ciocalteu method. Proanthocyanidins content were determined by the method of HCl-butanol hydrolysis. Antioxidant activities were evaluated both with 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay and by the trolox equivalent antioxidant capacity (TEAC) using 2,2’-azinobis(3-ethyl-benzothiazoline-6-sulfonic acid radical) (ABTS•+). The average contents of total phenols and proanthocyanidins were 506 μg GAE/ml of dolo and 45 μg APE/ml of dolo, respectively. An …

Toxicity Assessment And Analgesic Activity Investigation Of Aqueous Acetone Extracts Of Sida Acuta Burn F. And Sida Cordifolia L. (Malvaceae), Medicinal Plants Of Burkina Faso, Kiessoum Konate, Adama Hilou, Raïssa Rr Aworet-Samseny, Alain Souza, Nicolas Barro, Mamoudou H. Dicko Prof., Jacques Datté, Bertrand M’Batchi

Pr. Mamoudou H. DICKO, PhD

Background Sida acuta Burn f. and Sida cordifolia L. (Malvaceae) are traditionally used in Burkina Faso to treat several ailments, mainly pains, including abdominal infections and associated diseases. Despite the extensive use of these plants in traditional health care, literature provides little information regarding their toxicity and the pharmacology. This work was therefore designed to investigate the toxicological effects of aqueous acetone extracts of Sida acuta Burn f. and Sida cordifolia L. Furthermore, their analgesic capacity was assessed, in order to assess the efficiency of the traditional use of these two medicinal plants from Burkina Faso. Method For acute toxicity …

Antibacterial Activity Against Beta- Lactamase Producing Methicillin And Ampicillin-Resistants Staphylococcus Aureus: Fractional Inhibitory Concentration Index (Fici) Determination, Kiessoun K Onate, Jacques François Mavoungou, Alexis Nicaise Lepengué, Raïssa Rr Aworet-Samseny, Adama Hilou, Mamoudou H. Dicko Prof., Bertrand M’Batchi

Pr. Mamoudou H. DICKO, PhD

The present study reports the antibacterial capacity of alkaloid compounds in combination with Methicillin and Ampicillin-resistants bacteria isolated from clinical samples. The resistance of different bacteria strains to the current antibacterial agents, their toxicity and the cost of the treatment have led to the development of natural products against the bacteria resistant infections when applied in combination with conventional antimicrobial drugs. The antibacterial assays in this study were performed by using inhibition zone diameters, MIC, MBC methods, the time-kill assay and the Fractional Inhibitory Concentration Index (FICI) determination. On the whole, fifteen Gram-positive bacterial strains (MRSA/ARSA) were used. Negative control …

Bacteriocin Formation By Dominant Aerobic Sporeformers Isolated From Traditional Maari, Donatien Kabore, Line Thorsen, Dennis Sandris Nielsen, Torben Sune Berner, Hagrétou Sawadogo-Lingani, Bréhima Diawara, Mamoudou H. Dicko Prof., Mogens Jackobsen

Pr. Mamoudou H. DICKO, PhD

The antimicrobial activity of 8 Bacillus spp. and 2 Lysinibacillus spp. representing the predominant aerobic sporeformers during traditional maari fermentations, a traditional fermented baobab seeds product fromBurkina Faso,was investigated. The antimicrobial activitywas assessed against a total of 31 indicator organisms representing various Gram-negative and positive pathogens. The screening showed that 3 Bacillus subtilis strains (B3, B122 and B222) in particular had antimicrobial activity against some Gram-positive organisms and were selected for further studies. Itwas found that the antimicrobial substances producedwere heat stable, in-sensitive to catalase, sensitive to protease and trypsin but resistant to the proteolytic action of papain and proteinase …

Acid Resistance, Bile Tolerance And Antimicrobial Properties Of Dominant Lactic Acid Bacteria Isolated From Traditional “Maari” Baobab Seeds Fermented Condiment, Donatien Kabore, Hagrétou Sawadogo-Lingani, Mamoudou H. Dicko Prof., Bréhima Diawara, Mogens Jacobsen

Pr. Mamoudou H. DICKO, PhD

Maari is a fermented food condiment obtained by spontaneous fermentation of seeds from the baobab tree (Adansonia digitata). Nine dominant lactic acid bacteria (LAB) strains, isolated from traditional maari fermentation were examined for their resistance to pH 2.5, their tolerance to 0.3% bile and their antimicrobial activities against pathogenic bacteria. The agar spot test was used to screen the dominant LAB for antagonistic activity against a total of 21 indicator organisms including Bacillus cereus strains, Salmonella spp., Listeria monocytogenes, Yersinia enterocolitica, Escherichia coli and Micrococcus luteus. It was observed that all LAB strains survived in 0.3% bile and exhibited antimicrobial …

A Review Of Baobab (Adansonia Digitata) Products: Effect Of Processing Techniques, Medicinal Properties And Uses, Donatien Kabore, Hagrétou Sawadogo-Lingani, Bréhima Diawara, Clarise Compaoré, Mamoudou H. Dicko Prof., Mogens Jacobsen

Pr. Mamoudou H. DICKO, PhD

A general literature review including the effect of processing techniques, medicinal value and uses of baobab tree is reported in this manuscript. Baobab tree has multi-purpose uses, as it produces food and non-food products such as medicines, fuel, timber, fodder. Every part of the baobab tree is reported to be useful. The seeds, leaves, roots, flowers, fruit pulp and bark of baobab are edible. Baobab leaves are used in the preparation of soup. Seeds are used as a thickening agent in soups, but they can be fermented and used as a flavouring agent or roasted and eaten as snacks. The …

Antimicrobial And Antioxidant Activities Of Essential Oil And Methanol Extract Of Matricaria Chamomilla L. From Djibouti, Fatouma M. Abdoul-Latif, Mohamed Nabil, Prosper Edou, Adwa A. Ali, Samatar O. Djama, Louis-Clément Obamé, Mamoudou H. Dicko Prof.

Pr. Mamoudou H. DICKO, PhD

The essential oil and methanol extracts of Matricaria Chamomilla L. were subjected to screening for their possible antioxidant activity by two complementary test systems, namely 2,2-diphenykpicrylhydrazyl (DPPH) free radical scavenging and β-carotene-linoleic acid assays. BHT was used as positive control in both test systems. In the DPPH test system, the IC50 values of essential oil and methanol extracts were 4.18 and 1.83 μg/ml, respectively. In the β-carotene-linoleic acid system, oxidation was effectively inhibited by M. Chamomilla, the RAA value of essential oil and methanol extracts were 12.69 and 11.37 %, respectively. When compared to BHT, the essential oil and methanol …

Biodepollution Of Wastewater Containing Phenolic Compounds From Leather Industry By Plant Peroxidases, Mamounata Diao, Nafissetou Ouedraogo, Lamine Baba-Moussa, Paul W. Savadogo, Georges N'Guessan Amani, Mamoudou H. Dicko Prof.

Pr. Mamoudou H. DICKO, PhD

This study deals with the use of peroxidases (POXs) from Allium sativum, Ipomoea batatas, Raphanus sativus and Sorghum bicolor to catalyze the degradation of free phenolic compounds as well as phenolic compounds contained in wastewater from leather industry. Secretory plant POXs were able to catalyze the oxidation of gallic acid, ferulic acid, 4-hydroxybenzoic acid, pyrogallol and 1,4-tyrosol prepared in ethanol 2% (v:v). Efficiency of peroxidase catalysis depends strongly on the chemical nature of phenolic substrates and on the botanical source of the enzymes. It appeared that POX from Raphanus sativus had the highest efficiency. Results show that POXs can also …

An Analysis Of The Manufacturing Process As Related To The Camber Requirement For Brake Pads, Daniel Patrick Midden

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Daniel Patrick Midden on November 30, 2010.

Antimicrobial And Antioxidant Activities Of Essential Oil And Methanol Extract Of Jasminum Sambac From Djibouti, Fatou Abdoul-Latif, Prosper Edou, François Eba, Nabil Mohamed, Adwa Ali, Samatar Djama, Louis-Clément Obame, Mamoudou Hama Dicko

Pr. Mamoudou H. DICKO, PhD

The essential oil of jasminum sambac from Djibouti was subjected to screening for their possible antioxidant activity by two complementary test systems, namely DPPH free radical scavenging and beta-carotene-linoleic acid assays. Butylated hydroxytoluene (BHT) was used as positive control in both test systems. In the DPPH test system, the IC50 value of essential oil and methanol extract were respectively 7.43 and 2.30 μg/ml. In the beta-carotene-linoleic acid system, oxidation was effectively inhibited by Jasminum sambac, the RAA value of essential oil and methanol extract were respectively 96.6 and 93.9%. When compared to BHT, the essential oil and methanol extract had …

Building A Successful Transatlantic Collaboration In Engineering/Technological Education; Lessons From A Six Year Journey, Donal Mchale, Mark Mcgrath, John Lawlor

Conference Papers

This paper reflects on key learning’s from the first six-years (2004-2010) of the development of a collaborative journey of two trans-Atlantic higher-educational institutions. It describes the progress towards building a sustainable and innovative international educational partnership in Engineering/Technological education between the Technological University Dublin,DublinIrelandandPurdue University,Indiana,USA.

In particular, the paper provides insight into the iterative stages of development of this relationship. It reflects on some of the key challenges and it recognises the critical enablers of success. It focuses on challenges and solutions in the following six important areas

(i) The partnership initiation stage. Key considerations and important enablers of future …

Product Focused Freeform Fabrication Education, Frank W. Liou, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Presented in this paper is our experience of teaching freeform fabrication to students at the Missouri University of Science and Technology, and to high school students and teachers. The emphasis of the curriculum is exposing students to rapid product development technologies with the goal of creating awareness to emerging career opportunities in CAD/CAM. Starting from solid modeling, principles of freeform fabrication, to applications of rapid prototyping and manufacturing in industry sponsored product development projects, students can learn in-depth freeform fabrication technologies. Interactive course content with hands-on experience for product development is the key towards the success of the program.