Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2011

PDF

Discipline
Institution
Keyword
Publication
Publication Type

Articles 121 - 150 of 1024

Full-Text Articles in Mechanical Engineering

Improvement Of High Temperature Oxidation Of Low Carbon Steel Exposed To Ethanol Combustion Product At 700 °C By Hot-Dip Aluminizing Coating, Mohammad Badaruddin Nov 2011

Improvement Of High Temperature Oxidation Of Low Carbon Steel Exposed To Ethanol Combustion Product At 700 °C By Hot-Dip Aluminizing Coating, Mohammad Badaruddin

Makara Journal of Technology

Low carbon steel (AISI 1005) was coated by hot-dipping into a molten Al-10% Si bath at 700 °C for 18s. After hotdipping treatment, the coating layers consisted of Al, Si, FeAl3, τ5-Fe2Al8Si, and Fe2Al5. The bare steel and the aluminized steel were isothermally oxidized at 700 °C in ethanol combustion product at atmospheric pressure for 49 h. The aluminized steel shows good performance in high temperature oxidation because the formation of Al2O3 layer on the coating surface. The growth of iron oxide nodules on the surface coating was accelerated by rapid outward diffusion of Fe-ions due to the presence of …

Go to article

Application Of Empirical Orthogonal Function Models To Analyze Shoreline Change At Bangkalan Madura, Darius Arkwright, Suntoyo Suntoyo Nov 2011

Application Of Empirical Orthogonal Function Models To Analyze Shoreline Change At Bangkalan Madura, Darius Arkwright, Suntoyo Suntoyo

Makara Journal of Technology

Bangkalan’s shoreline, especially on the opposite side of Surabaya, has been evaluated to determine the morphological changes due to wave attack, near-shore current, long-shore sediment transport and coastal configuration. This research aims to determine the dominant patterns of variation of Bangkalan’s shoreline change, expressed by Eigen-function in empirical orthogonal function (EOF) models. That was started with data collection such as oceanographic data (wave and tidal), bathymetry and topographic map and sediment data. All data was used for forecasting two-monthly shoreline. Coordinate of two-monthly shoreline was used as input of EOF model. The first Eigen mode is a profile of shoreline …

Go to article

The Effectiveness Of Anaerobic Baffled Reactor And Rotating Biological Contactor In Batik Wastewater Treatment, Augustinus Ignatius Kristijanto, Widhi Handayani, Purwanti Asih Anna Levi Nov 2011

The Effectiveness Of Anaerobic Baffled Reactor And Rotating Biological Contactor In Batik Wastewater Treatment, Augustinus Ignatius Kristijanto, Widhi Handayani, Purwanti Asih Anna Levi

Makara Journal of Technology

Batik is one of popular arts of Indonesia. The batik industries in Sragen, Central Java, are prepared to compete in global market. In order to realize that objective, batik products should fulfill some qualifications, one of which is “environmental friendliness”. As batik production is usually generating wastewater which pollutes the environment, the technology of wastewater treatment should be developed to solve the problem. This preliminary study has been done to assess the effectiveness of anaerobic baffled reactor (ABR) and rotating biological contactor (RBC) in batik wastewater treatment. In 40 days of treatment period, the ABR performance in reducing pollutants showed …

Go to article

Cassava Pulp As A Biofuel Feedstock Of An Enzymatic Hydrolysis Proces, Djuma’Ali Djuma’Ali, Nonot Soewarno, Sumarno Sumarno, Dyah Primarini, Wahono Sumaryono Nov 2011

Cassava Pulp As A Biofuel Feedstock Of An Enzymatic Hydrolysis Proces, Djuma’Ali Djuma’Ali, Nonot Soewarno, Sumarno Sumarno, Dyah Primarini, Wahono Sumaryono

Makara Journal of Technology

Cassava pulp, a low cost solid byproduct of cassava starch industry, has been proposed as a high potential ethanolic fermentation substrate due to its high residual starch level, low ash content and small particle size of the lignocellulosic fibers. As the economic feasibility depends on complete degradation of the polysaccharides to fermentable glucose, the comparative hydrolytic potential of cassava pulp by six commercial enzymes were studied. Raw cassava pulp (12% w/v, particle size <320 >μm) hydrolyzed by both commercial pectinolytic (1) and amylolytic (2) enzymes cocktail, yielded 70.06% DE. Hydrothermal treatment of cassava pulp enhanced its susceptibility to enzymatic cleavageas compared …

Go to article

Nonlinear Progressive Wave Equation For Stratified Atmospheres, B. Edward Mcdonald, Andrew A. Piacsek Nov 2011

Nonlinear Progressive Wave Equation For Stratified Atmospheres, B. Edward Mcdonald, Andrew A. Piacsek

All Faculty Scholarship for the College of the Sciences

The nonlinear progressive wave equation (NPE) [McDonald and Kuperman, J. Acoust. Soc. Am. 81, 1406–1417 (1987)] is expressed in a form to accommodate changes in the ambient atmospheric density, pressure, and sound speed as the time-stepping computational window moves along a path possibly traversing significant altitude differences (in pressure scale heights). The modification is accomplished by the addition of a stratification term related to that derived in the 1970s for linear range-stepping calculations and later adopted into Khokhlov-Zabolotskaya-Kuznetsov-type nonlinear models. The modified NPE is shown to preserve acoustic energy in a ray tube and yields analytic similarity solutions for …

Go to article

Cutting Tool Insert Having Internal Microduct For Coolant, William J. Endres Nov 2011

Cutting Tool Insert Having Internal Microduct For Coolant, William J. Endres

Michigan Tech Patents

A cutting tool insert includes: a body defining a rake face, a flank face, and a cutting edge at an intersection of the rake and flank faces; and a cooling microduct within the body. The microduct has a cross-sectional area of not more than 1.0 square millimeter. The microduct is adapted to permit the flow of a coolant therethrough to transfer heat away from the cutting edge and extend the useful life of the insert. The microduct may have a portion with a cross-sectional area no larger than 0.004 square millimeter, and may communicate through at least one of the …

Go to article

Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel Nov 2011

Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel

A.S. Md Abdul Haseeb

Biodiesel is currently in regular use as an alternative fuel over conventional petroleum diesel. However, corrosion of automotive materials is one of the concerns related to biodiesel compatibility issues. In addition, auto-oxidation of biodiesel can also enhance the corrosiveness of biodiesel. The present study aims to investigate inhibition effect of ethylenediamine (EDA), n-butylamine (nBA), tert-butylamine (TBA) against corrosion of cast iron. Static immersion tests in biodiesel in the presence (100 ppm) and absence of different corrosion inhibitors were carried out at room temperature for 1200 hours. At the end of the test, corrosion characteristic was investigated by weight loss measurements …

Go to article

Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel Nov 2011

Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel

A.S. Md Abdul Haseeb

Biodiesel is currently in regular use as an alternative fuel over conventional petroleum diesel. However, corrosion of automotive materials is one of the concerns related to biodiesel compatibility issues. In addition, auto-oxidation of biodiesel can also enhance the corrosiveness of biodiesel. The present study aims to investigate inhibition effect of ethylenediamine (EDA), n-butylamine (nBA), tert-butylamine (TBA) against corrosion of cast iron. Static immersion tests in biodiesel in the presence (100 ppm) and absence of different corrosion inhibitors were carried out at room temperature for 1200 hours. At the end of the test, corrosion characteristic was investigated by weight loss measurements …

Go to article

Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel, Haseeb Asma Nov 2011

Effect Of Different Corrosion Inhibitors On The Corrosion Of Cast Iron In Palm Biodiesel, Haseeb Asma

Haseeb ASMA

Biodiesel is currently in regular use as an alternative fuel over conventional petroleum diesel. However, corrosion of automotive materials is one of the concerns related to biodiesel compatibility issues. In addition, auto-oxidation of biodiesel can also enhance the corrosiveness of biodiesel. The present study aims to investigate inhibition effect of ethylenediamine (EDA), n-butylamine (nBA), tert-butylamine (TBA) against corrosion of cast iron. Static immersion tests in biodiesel in the presence (100 ppm) and absence of different corrosion inhibitors were carried out at room temperature for 1200 hours. At the end of the test, corrosion characteristic was investigated by weight loss measurements …

Go to article

Aspects Of Fatigue Failure Mechanisms In Polymer Fuel Cell Membranes, Ahmet Kusoglu, Michael H. Santare, Anette M. Karlsson Nov 2011

Aspects Of Fatigue Failure Mechanisms In Polymer Fuel Cell Membranes, Ahmet Kusoglu, Michael H. Santare, Anette M. Karlsson

Mechanical Engineering Faculty Publications

The swelling-driven fatigue behavior of polymer fuel cell membranes during relative humidity (RH) cycling is investigated. In particular, swelling-induced membrane stresses are obtained from a numerical model simulating fuel cell RH cycle tests, and compared to the lifetimes obtained experimentally from tests conducted in the absence of electrochemical effects. A strong correlation between the lifetimes of the membranes in the actual tests and model results is obtained. In general, higher RH (or swelling) amplitude results in larger stress amplitudes and shorter lifetime, that is, fewer cycles to failure. Tensile stresses are needed for forming local cavities in the membrane, which …

Go to article

Gait Verification Using Knee Acceleration Signals, L. W. Hang, C. Y. Hong, C. W. Yen, D. J. Chang, Mark L. Nagurka Nov 2011

Gait Verification Using Knee Acceleration Signals, L. W. Hang, C. Y. Hong, C. W. Yen, D. J. Chang, Mark L. Nagurka

Mechanical Engineering Faculty Research and Publications

A novel gait recognition method for biometric applications is proposed. The approach has the following distinct features. First, gait patterns are determined via knee acceleration signals, circumventing difficulties associated with conventional vision-based gait recognition methods. Second, an automatic procedure to extract gait features from acceleration signals is developed that employs a multiple-template classification method. Consequently, the proposed approach can adjust the sensitivity and specificity of the gait recognition system with great flexibility. Experimental results from 35 subjects demonstrate the potential of the approach for successful recognition. By setting sensitivity to be 0.95 and 0.90, the resulting specificity ranges from 1 …

Go to article

Seamless Bridge And Roadway System For The U.S. Practice, Nima Ala Nov 2011

Seamless Bridge And Roadway System For The U.S. Practice, Nima Ala

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Expansion joints are one of the main causes for high maintenance costs in bridges. The search for ideal expansion joints has proven fruitless. That is why it has been said that “the best joint is no joint”. A seamless bridge system is envisioned that results in bridges with long service lives by eliminating the joints over the entire length of the bridge, approach slab and a segment of the roadway called transition. All bridge thermal movements are dissipated to zero in the transition. The system is similar to a system developed in Australia but modifications had to be made to …

Go to article

Engineering On The Rose Float: Final Project Report, Stephen Boles, Garrett Dong, Peter Hoonhout Nov 2011

Engineering On The Rose Float: Final Project Report, Stephen Boles, Garrett Dong, Peter Hoonhout

Mechanical Engineering

The purpose of this project is to design the simple mechanical movement systems of the 2012 Cal Poly Tournament of Roses Float Parade to prevent failure. Three mechanisms were designed. One of the mechanisms is a tall building that has a superhero and helicopter rotating around the top; it also has the ability to rotate the top 2/3rds of the mechanism to a 90 degree angle to fit under a 16.5 foot bridge. Another mechanism is the cars that look like they are driving on the pod’s road surface via train tracks underneath the surface. The cars will travel …

Go to article

Response Characterization Of Electroactive Polymers As Mechanical Sensors, G. Alici, Geoffrey M. Spinks, J. D. Madden, Y. Wu, G G. Wallace Oct 2011

Response Characterization Of Electroactive Polymers As Mechanical Sensors, G. Alici, Geoffrey M. Spinks, J. D. Madden, Y. Wu, G G. Wallace

Gordon Wallace

The characterization of the dynamic response (including transfer function identification) of trilayer polypyrrole (PPy) type conducting polymer sensors is presented. The sensor was built like a cantilever beam with the free end stimulated through a mechanical lever system, which provided displacement inputs. The voltage generated and current passing between the two outer PPy layers as a result of the input was measured to model the output/input behavior of the sensors based on their experimental current/displacement and voltage/displacement frequency responses. We specifically targeted the low-frequency behavior of the sensor as it is a relatively slowsystem. Experimental transfer function models were generated …

Go to article

Pulsed Fusion And Radiation-Cooled Gaseous Core Fission Rocket Performance Comparisons For A Mars Roundtrip Mission, Miles Owen Oct 2011

Pulsed Fusion And Radiation-Cooled Gaseous Core Fission Rocket Performance Comparisons For A Mars Roundtrip Mission, Miles Owen

Von Braun Symposium Student Posters

No abstract provided.

Go to article

Method And Apparatus For Characterizing Microscale Formability Of Thin Sheet Materials, Nasr A. Shuaib, Marwan K. Khraisheh Oct 2011

Method And Apparatus For Characterizing Microscale Formability Of Thin Sheet Materials, Nasr A. Shuaib, Marwan K. Khraisheh

Mechanical Engineering Faculty Patents

A method of predicting sheet formability at a microscale level includes the steps of providing a grid pattern on a test sheet, bulging the test sheet to a hemispherical shape until a crack is initiated on the surface of the test sheet, detecting the initiation of the crack, acquiring two images of the surface adjacent to the crack and calculating surface strains on the test sheet.

Go to article

History Of The Biological Systems Engineering Program In Nebraska, University Of Nebraska-Lincoln, William E. Splinter Oct 2011

History Of The Biological Systems Engineering Program In Nebraska, University Of Nebraska-Lincoln, William E. Splinter

Tractor Testing Development and Research Documents

The Farm Machinery/Agricultural Engineering/Biological Systems Engineering program current and former faculty members at the University of Nebraska, as demonstrated here, has made a statewide, national, and worldwide impact on the efficient production of food. The quality of this recognition is evidenced best by peer professionals through recognized ASABE awards received by Nebraska alumni or professors. Since its inception in 1909 and until 2010, there have been 10 national presidents, 19 gold medal recipients and 33 named national award recipients. Currently there are 31 ASABE Fellows and two members of the National Academy of Engineering. This national recognition comes as a …

Go to article

Aerial Rendezvous Between An Unmanned Air Vehicle And An Orbiting Target Vehicle, Mark Andrew Owen Oct 2011

Aerial Rendezvous Between An Unmanned Air Vehicle And An Orbiting Target Vehicle, Mark Andrew Owen

Theses and Dissertations

In this thesis we develop methods that facilitate an aerial rendezvous between two air vehicles. The objective of this research is to produce a method that can be used to insert a miniature air vehicle behind a rendezvous vehicle and then track that vehicle to enable a visual rendezvous. For this research we assume the rendezvous vehicle is following a relatively stable and roughly elliptical orbit. Path planners and controllers have been developed that can be used to effectively intercept the rendezvous vehicle by inserting the MAV onto the orbit of interest. A method for planning and following time-optimal Dubins …

Go to article

A Novel Solid Oxide Redox Flow Battery For Grid Energy Storage, Nansheng Xu, Xue Li, Xuan Zhao, John B. Goodenough, Kevin Huang Oct 2011

A Novel Solid Oxide Redox Flow Battery For Grid Energy Storage, Nansheng Xu, Xue Li, Xuan Zhao, John B. Goodenough, Kevin Huang

Faculty Publications

In this work we report proof-of-concept of a novel redox flow battery consisting of a solid oxide electrochemical cell (SOEC) integrated with a redox-cycle unit. The charge/discharge characteristics were explicitly observed by operating between fuel cell and electrolysis modes of the SOEC along with “in-battery” generation and storage of H2 realized by an in situ closed-loop reversible steam-metal reaction in the redox-cycle unit. With Fe/FeO as the redox materials, the new storage battery can produce an energy capacity of 348 Wh/kg-Fe and round-trip efficiency of 91.5% over twenty stable charge/discharge cycles. This excellent performance combined with robustness, environmental friendliness …

Go to article

Direct Numerical Simulation Of Hypersonic Turbulent Boundary Layers. Part 4. Effect Of High Enthalpy, L. (Lian) Duan, M. P. Martín Oct 2011

Direct Numerical Simulation Of Hypersonic Turbulent Boundary Layers. Part 4. Effect Of High Enthalpy, L. (Lian) Duan, M. P. Martín

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper we present direct numerical simulations (DNS) of hypersonic turbulent boundary layers to study high-enthalpy effects. We study high-and low-enthalpy conditions, which are representative of those in hypersonic flight and ground-based facilities, respectively. We find that high-enthalpy boundary layers closely resemble those at low enthalpy. Many of the scaling relations for low-enthalpy flows, such as van-Driest transformation for the mean velocity, Morkovin's scaling, and the modified strong Reynolds analogy hold or can be generalized for high-enthalpy flows by removing the calorically perfect-gas assumption. We propose a generalized form of the modified Crocco relation, which relates the mean temperature …

Go to article

A Study Of Solder Joint Failure Criteria, Jianbiao Pan, Julie Silk Oct 2011

A Study Of Solder Joint Failure Criteria, Jianbiao Pan, Julie Silk

Industrial and Manufacturing Engineering

One of the challenges in an experimental study of solder joint reliability is to determine when cracks occur in a solder joint or when a solder joint fails. Cracks in a real solder joint are difficult to identify using an X-Ray system. Cross-sectioning and scanning electron microscopy (SEM) is a destructive method. A common non-destructive test method is to monitor resistance increase in a solder joint or a daisy-chain. However, no scientific research has been done in establishing the relationship between the crack area of an interconnection and the change in resistance of the interconnection. This paper proposes a method …

Go to article

An Overview Of Sustainable Universities, B Bakhtyar Oct 2011

An Overview Of Sustainable Universities, B Bakhtyar

B Bakhtyar

This book covers definitions, concept, and history of sustainable development (SD), sustainability in higher education (SHE) or sustainable campus, its related theories, history of SHE and the components of SHE, community aspect of SHE or sustainable community, the similarities and differences of cities and university campuses as well as different existing assessment approaches in the world. Moreover, different interpretation of SD, SHE, and their principal and components are introduced. It attempts to give a clear perspective on the history, definitions and different approaches of SHE. Finally, it describes the birth of SD and SHE and their existing status in the …

Go to article

Synthesis, Structural, Optical And Mechanical Characterization Of Srb2O4 Nanorods, Rui Li, Lihong Bao, Xiaodong Li Oct 2011

Synthesis, Structural, Optical And Mechanical Characterization Of Srb2O4 Nanorods, Rui Li, Lihong Bao, Xiaodong Li

Faculty Publications

Single crystalline strontium borate (SrB2O4) nanorods were synthesized for the first time via a facile sol–gel route at low temperature. The SrB2O4 nanorods have a good crystalline nature with the growth direction along the [511] orientation and they are transparent from the ultraviolet to the visible regimes. Nanoscale three-point bending tests were performed directly on individual nanorods to probe their mechanical properties using an atomic force microscope. The elastic modulus of SrB2O4 nanorods was measured to be 158.2 ± 2.8 GPa, exhibiting a significant increase compared with other borate nanostructures …

Go to article

Automated Flow Path Design Optimization Using Mesh Morphing, William Dennis Gough Oct 2011

Automated Flow Path Design Optimization Using Mesh Morphing, William Dennis Gough

Theses and Dissertations

The use of CAD models and CFD analysis has become an essential part of fluid flow design. To reduce the time spent determining a design, optimization frameworks have been implemented to automate the process. Mesh morphing has been implemented within these frameworks to further reduce the time needed. While optimization methods have been developed to optimize a fluid flow path, the optimum design needs to be recreated in a CAD model. A method has been developed which eliminates the need to recreate the optimal results in CAD. This is accomplished by using mesh morphing, CAD and CFD together in an …

Go to article

Technical Note: Friction Factor Diagrams For Pipe Flow, Jim Mcgovern Oct 2011

Technical Note: Friction Factor Diagrams For Pipe Flow, Jim Mcgovern

Articles

This technical note describes diagrams of friction factor for pipe flow that have been prepared using, mainly, the equations that Lewis Moody used to prepare his famous diagram in 1944. The preparation of the new diagrams was prompted by the need for vector graphics versions that could be used for teaching purposes and that could be distributed freely to students and others under a Creative Commons Attribution-Share-Alike license. Using a structure very similar to that of Moody's diagram, variants with the Darcy friction factor and the Fanning friction factor have been prepared. In addition, variants have been prepared that include …

Go to article

On The Distortion And Warpage Of 7249 Aluminum Alloy After Quenching And Machining, N. Keleshian, R. Kyser, J. Rodriquez, C. Cueva, V. Vega, E. W. Lee, J. Ogren, Omar S. Es-Said Oct 2011

On The Distortion And Warpage Of 7249 Aluminum Alloy After Quenching And Machining, N. Keleshian, R. Kyser, J. Rodriquez, C. Cueva, V. Vega, E. W. Lee, J. Ogren, Omar S. Es-Said

Mechanical Engineering Faculty Works

The objective of this study is to determine the effect of solution treatment temperature, quenching media, and various machining sequences on the warpage behavior of aluminum 7249 alloy aged to T6 and T7' tempers. Large extrusions of 7249 aluminum alloy with fins were cut into 108 "T" sections. The samples were solution-treated, aged, and machined. Three solution temperatures (445, 474, and 505 A degrees C), two quenching media (water and 20% polyalkylene glycol), two aging treatments (T6 and T7'), and three machine sequences were used. The flatness of the samples was measured on the surfaces orthogonal to the z-axis. Three …

Go to article

Effect Of Gold Content On The Reliability Of Snagcu Solder Joints, Jianbiao Pan, J. Silk, M. Powers, P. Hyland Oct 2011

Effect Of Gold Content On The Reliability Of Snagcu Solder Joints, Jianbiao Pan, J. Silk, M. Powers, P. Hyland

Industrial and Manufacturing Engineering

Electroplated Ni/Au over Cu is a popular metallization for printed circuit board finish as well as for component leads, especially wire-bondable high-frequency packages, where the gold thickness requirement for wire bonding is high. The general understanding is that less than 3 wt% of Au is acceptable in SnPb solder joints. However, little is known about the effect of Au content on the reliability of SnAgCu solder joints. The purpose of this paper is to determine the acceptable level of Au in SAC305 solder joints. Three different package platforms with different Au thicknesses were assembled on boards with two different Au …

Go to article

Innovative Manufacturing Process For Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing, W. Miranda, G. Takiguchi, T. Shimabukuro, L. Mclennan, C. Agajanian, L. Quintero, D. Mismar, J. Abdulla, C. Andrews, M. Hahn, E. Fodran, E. W. Lee, H. Garmestani, R. D. Conner, D. Brick, J. Ogren, Omar S. Es-Said Oct 2011

Innovative Manufacturing Process For Defect Free, Affordable, High Pressure, Thin Walled, Hydraulic Tubing, W. Miranda, G. Takiguchi, T. Shimabukuro, L. Mclennan, C. Agajanian, L. Quintero, D. Mismar, J. Abdulla, C. Andrews, M. Hahn, E. Fodran, E. W. Lee, H. Garmestani, R. D. Conner, D. Brick, J. Ogren, Omar S. Es-Said

Mechanical Engineering Faculty Works

Various thermo-mechanical processes were performed on a standard and a low oxygen content Ti-6Al-4V alloy. Testing was performed to determine whether it was possible to achieve a combination of tensile properties comparable to those of Ti-3Al-2.5V by means of cold working and annealing Ti-6Al-4V from a thickness of 0.671 cm (0.264 in.) to that between 0.081 and 0.094 cm (0.032-0.037 in.), which had never been carried out before. The resulting mechanical properties of this study were compared to the mechanical properties of Ti-3Al-2.5V to determine whether Ti-6Al-4V could be used as a suitable replacement for hydraulic tubing applications. The optimum …

Go to article

3d Simulation Of Wind Turbine Rotors At Full Scale. Part Ii: Fluid–Structure Interaction Modeling With Composite Blades, Y. Bazilevs, Ming-Chen Hsu, J. Kiendel, R. Wuchner, K. U. Bletzigner Oct 2011

3d Simulation Of Wind Turbine Rotors At Full Scale. Part Ii: Fluid–Structure Interaction Modeling With Composite Blades, Y. Bazilevs, Ming-Chen Hsu, J. Kiendel, R. Wuchner, K. U. Bletzigner

Ming-Chen Hsu

In this two-part paper, we present a collection of numerical methods combined into a single framework, which has the potential for a successful application to wind turbine rotor modeling and simulation. In Part 1 of this paper we focus on: 1. The basics of geometry modeling and analysis-suitable geometry construction for wind turbine rotors; 2. The fluid mechanics formulation and its suitability and accuracy for rotating turbulent flows; 3. The coupling of air flow and a rotating rigid body. In Part 2, we focus on the structural discretization for wind turbine blades and the details of the fluid–structure interaction computational …

Go to article

Effect Of Gold Content On The Reliability Of Snagcu Solder Joints, Jianbiao Pan, J. Silk, M. Powers, P. Hyland Oct 2011

Effect Of Gold Content On The Reliability Of Snagcu Solder Joints, Jianbiao Pan, J. Silk, M. Powers, P. Hyland

Jianbiao Pan

Electroplated Ni/Au over Cu is a popular metallization for printed circuit board finish as well as for component leads, especially wire-bondable high-frequency packages, where the gold thickness requirement for wire bonding is high. The general understanding is that less than 3 wt% of Au is acceptable in SnPb solder joints. However, little is known about the effect of Au content on the reliability of SnAgCu solder joints. The purpose of this paper is to determine the acceptable level of Au in SAC305 solder joints. Three different package platforms with different Au thicknesses were assembled on boards with two different Au …

Go to article

First Prev Next Last