Mechanical Engineering Commons^™

A Versatile Microparticle-Based Immunoaggregation Assay For Macromolecular Biomarker Detection And Quantification, Haiyan Wu, Yu Han, George G. Chase, Qiong Tang, Chen-Jung Lee, Bin Cao, Jiang Zhe, Gang Cheng

Dr. Jiang Zhe

The rapid, sensitive and low-cost detection of macromolecular biomarkers is critical in clinical diagnostics, environmental monitoring, research, etc. Conventional assay methods usually require bulky, expensive and designated instruments and relative long assay time. For hospitals and laboratories that lack immediate access to analytical instruments, fast and low-cost assay methods for the detection of macromolecular biomarkers are urgently needed. In this work, we developed a versatile microparticle (MP)-based immunoaggregation method for the detection and quantification of macromolecular biomarkers. Antibodies (Abs) were firstly conjugated to MP through streptavidin-biotin interaction; the addition of macromolecular biomarkers caused the aggregation of Ab-MPs, which were subsequently …

Zwitteration Of Dextran: A Facile Route To Integrate Antifouling, Switchability And Optical Transparency Into Natural Polymers, Bin Cao, Linlin Li, Haiyan Wu, Qiong Tang, Bingbing Sun, He Dong, Jiang Zhe, Gang Cheng

Dr. Jiang Zhe

This communication reports a facile method for zwitteration of dextran with carboxybetaine (CB), which integrates superior antifouling properties, switchability between zwitterionic and cationic forms, as well as enhanced optical transparency into one polysaccharide material. This study provides a new avenue for generating multifunctional zwitterionic CB materials in situ.

Label-Free Biomarker Assay In A Microresistive Pulse Sensor Via Immunoaggregation, Yu Han, Haiyan Wu, Fan Li, Gang Cheng, Jiang Zhe

Dr. Jiang Zhe

We present a label-free biomarker detection method based on immunoaggregation and resistive pulse sensing technology. In this approach, target biomarkers and antibody (Ab)-functionalized microparticles are mixed to form biomarker–microparticle aggregates. A resistive pulse sensor is then used to measure the sizes and count the number of aggregates. The measured volume fraction of the aggregates represents the concentration of the targeted biomarker. In our tests, human ferritin, used as a biomarker, triggered the aggregation of antiferritin Ab-functionalized microparticles in phosphate-buffered saline (PBS). The volume fraction of aggregates increased with the increased ferritin concentration. We also demonstrated the detection of human ferritin …

Single-And Multi-Hole Baffles-A Heat Transfer And Fluid Flow Control For Hydrothermal Growth, Edward Evans, Hongmin Li, Guo-Xiang Wang

Dr. Guo-Xiang Wang

Hydrothermal solution growth is an important technique to grow high-quality single crystals. An autoclave, a closed cylindrical low-carbon steel vessel, is used to grow the large size crystals. A baffle located at the median height divides an autoclave into two chambers. Previous numerical studies indicate that the buoyancy-driven flow within an autoclave is very sensitive to the temperatures on the wall established by the heating. Baffles are required to establish the conditions for growth of high quality single crystals. This paper presents a numerical study of the effects of various baffles on the fluid flow and temperature fields in an …

Three-Dimensional Flow Of Solution In An Industry-Size Hydrothermal Autoclave Subjected To Non-Uniform Heating Effects Of A Baffle On Flow And Temperature Separation, Hongmin Li, Guo-Xiang Wang, Edward Evans

Dr. Guo-Xiang Wang

Hydrothermal growth takes place in a closed cylindrical container called an autoclave. Natural convection flow of an aqueous solution at a high temperature and a high pressure carries the nutrient. The high temperature growth condition and the natural convection flow are maintained by two independently controlled electrical heaters on the outside of the autoclave. In practice, the heating is circumferentially non-uniform. Many theoretical and numerical studies, however, assume axially symmetric heating conditions. This paper presents a numerical analysis of the three-dimensional heat transfer and fluid flow with a non-uniform heating condition. The analysis is based on an industry-size autoclave with …

Group Decisions In Value Management, Christiono Utomo, Farida Murti, Arazi Idrus

Makara Journal of Technology

This research deals with a technique to expedite group decision making during the selection of technical solutions for value management process. Selection of a solution from a set of alternatives is facilitated by evaluating using multicriteria decision making techniques. During the process, every possible solution is rated on criteria of function and cost. Function deals more with quality than with quantity, and cost can be calculated based on the theoretical time value of money. Decision-making techniques based on satisfying games are applied to determine the relative function and cost of solutions and hence their relative value. The functions were determined …

Fiber Optic Ring Resonator Sensor Detection Technique Based On Spectral Intensity Integration, Purnomo Sidi Priambodo, Sasono Rahardjo, Gunawan Witjaksono, Djoko Hartanto

Makara Journal of Technology

Resonant field phenomenon in optical ring resonator has been a major theme for various studies and can be used for various sensor applications. The spectral response shape changes are subjects to be discussed and analyzed for detection in optical sensor system. The spectral response changes are caused by various factors ranging from refractive index of the surrounding medium, medium loss due to absorption and scattering, and coupling variation between waveguides. These optical phenomena are mostly used for bio-sensor applications, since it is free from electromagnetic interference (EMI) and non-physically destructive. In this paper, we discuss our current research in developing …

Energy And Exergy Analysis Of Kalina Cycle For The Utilization Of Waste Heat In Brine Water For Indonesian Geothermal Field, Nasruddin Nasruddin, Agus Noor Sidiq, Abdulmajeed Mohamad, Rama Usvika

Makara Journal of Technology

The utilization of waste heat in a power plant system—which would otherwise be released back to the environment—in order to produce additional power increases the efficiency of the system itself. The purpose of this study is to present an energy and exergy analysis of Kalina Cycle System (KCS) 11, which is proposed to be utilized to generate additional electric power from the waste heat contained in geothermal brine water available in the Lahendong Geothermal power plant site in North Sulawesi, Indonesia. A modeling application on energy and exergy system is used to study the design of thermal system which uses …

Phonon-Drag Contribution To Seebeck Coefficient Of Ge-On-Insulator Substrate Fabricated By Wafer Bonding Process, Veerappan Manimuthu, Shoma Yoshida, Yuhei Suzuki, Faiz Salleh, Mukannan Arivanandhan, Yoshinari Kamakura, Yasuhiro Hayakawa, Hiroya Ikeda

Makara Journal of Technology

In order to build high-sensitivity infrared photodetectors using SiGe nanowires, we investigate the thermoelectric characteristics of Ge-on-insulator (GOI) layers as a reference for SiGe. We fabricate p-type GOI substrates with an impurity concentration of 1016-1018cm-3 by a wafer-bonding process using Ge and oxidized Si wafers. Annealing treatment is performed in order to further increase the bonding strength of Ge/SiO2 interface. We measure the Seebeck coefficient in the temperature range of 290-350 K. The Seebeck coefficient of the GOI layers is very close to the theoretical value for Ge, calculated on the basis of carrier transport. Hence, there is a small …

Driving Force For Binary Alloy Solidification Under Far From Local Equilibrium Conditions, Sergey Sobolev

Sergey Sobolev

No abstract provided.

Characterization Of Nickel-Doped Biphasic Calcium Phosphate/Graphene Nanoplatelet Composites For Biomedical Application

Faculty of Engineering University of Malaya

The effect of the addition of an ionic dopant to calcium phosphates for biomedical applications requires specific research due to the essential roles played in such processes. In the present study, the mechanical and biological properties of Ni-doped hydroxyapatite (HA) and Ni-doped HA mixed with graphene nanoplatelets (GNPs) were evaluated. Ni (3 wt.% and 6 wt.%)-doped HA was synthesized using a continuous precipitation method and calcined at 900 degrees C for 1 h. The GNP (0.5-2 wt.%)-reinforced 6% Ni-doped HA (Ni6) composite was prepared using rotary ball milling for 15 h. The sintering process was performed using hot isostatic pressing …

Seebeck Coefficient Of Soi Layer Induced By Phonon Transport, Faiz Salleh, Takuro Oda, Yuhei Suzuki, Yoshinari Kamakura, Hiroya Ikeda

Makara Journal of Technology

The Seebeck coefficient of a patterned Si wire on P-doped SOI (Si-on-insulator) layer with a carrier concentration of 1018 cm-3 was measured near room temperature. The Seebeck coefficient is found to be smaller than that in the SOI layer and to be closer to the calculated Seebeck coefficient including the electronic contribution. The decrease in the Seebeck coefficient of Si wire is likely to occur due to the elimination of the contribution of phonon drag part. From the theoretical calculation of scattering rates by considering the scattering processes in phonon system, it is considered that an increase in phonon-boundary scattering …

Hazard-Driven Drivers’ Behaviours Towards Vehicle-To-Median Safe Distances, Martha Leni Siregar

Makara Journal of Technology

A median is required for a two-way road to separate traffic from opposing lanes and to prevent head-on collisions. However, studies indicate that medians are also perceived as hazards which need to be avoided during driving. This hazard perception is manifested in drivers’ changing behavior towards various types of medians along the driving lanes inform of their tendency to allow various safe distances to the medians. The Indonesian Highway Capacity Manual (IHCM) does not differentiate between types of medians and the influence on the drivers’ choice of safe margin to the medians. Therefore, this study looks into how the existence …

Construction Of A Novel Method Of Measuring Thermal Conductivity For Nanostructures, Hiroya Ikeda, Shoma Yoshida, Yuhei Suzuki, Veerappan Manimuthu, Faiz Salleh, Fujio Kuwahara, Masaru Shimomura, Kenji Murakami

Makara Journal of Technology

With the aim of characterizing the thermal conduction in a nanometer-scaled materials, we have constructed a novel method on the basis of an ac calorimetric method. In this method, periodic sample heating is performed by light irradiation and the corresponding periodic temperature is detected by infrared irradiative thermometer. This makes us measure the thermal diffusivity out of contact with the objective sample. In the present study, we confirm to measure the thermal diffusivity of bulk Si and Cu by this non-contact method with halogen-lamp irradiation. In determining the thermal diffusivity from the relationship between distance deviation and delay time, the …

The Effects Of The Types Of Milk (Cow, Goat, Soya) And Enzymes (Rennet, Papain, Bromelain) Toward Cheddar Cheese Production, Ariestya Arlene, Anastasia Prima Kristijarti, Ivana Ardelia

Makara Journal of Technology

The objectives of this research are to study the effects of different types of milk and enzymes toward the yield and quality (moisture, ash, protein, fat content, and texture) of cheddar cheese and the interaction between those two variables during the process. The types of milk are cow, goat, and soya milk, while the types of enzymes are rennet, papain, and bromelain enzymes. Regarding the procedure, the milk is first pasteurized before CaCl2 and Lactobacillus lactis that acts as the acidifier starter as much as 0.2% (w/v) and 0.5% of the milk volume are added respectively. The amount of enzyme …

Effects Of Nano Additives On Hydrogen Storage Behavior Of The Multinary Complex Hydride Libh4/Linh2/Mgh2., Sesha Srinivasan, Michael Niemann, Jason Hattrick-Simpers, Kimberly Mcgrath, Prakash Sharma, D. Goswami, Elias Stefanakos

Jason R. Hattrick-Simpers

No abstract provided.

Development Of Combined Optical Cell And Sieverts-Type Apparats For In-Situ Measurement Of Hydrogen Storage Materials, Chun Chiu, Jason Hattrick-Simpers, Edwin Heilweil, Leonid Bendersky

Jason R. Hattrick-Simpers

No abstract provided.

Raman Spectroscopic Observation Of Dehydration In Ball-Milled Linh2-Libh4-Mgh2 Nanoparticles, Jason Hattrick-Simpers, James Maslar, Michael Niemann, Chun Chiu, Sesha Srinivasan, Elias Stefanakos, Leonid Bendersky

Jason R. Hattrick-Simpers

No abstract provided.

Exploration Of Magnetoelectric Thin-Film Sensors Using Supperlattice Composition Spreads, K.-S. Chang, M. Aronova, C. Gao, C. Lin, Jason Hattrick-Simpers, M. Murakami, I. Takeuchi

Jason R. Hattrick-Simpers

No abstract provided.

Observation Of Phase Transitions In Hydrogenated Yttrium Films Via Normalized Infrared Emissivity, Jason Hattrick-Simpers, Ke Wang, Lei Cao, Chun Chiu, Edwin Heilweil, Robert Downing, Leonid Bendersky

Jason R. Hattrick-Simpers

No abstract provided.

Optical Cell For Combinatorial In Situ Raman Spectroscopic Measurements Of Hydrogen Storage Materials At High Pressures And Temperatures, Jason Hattrick-Simpers, Wilbur Hurst, Sesha Srinivasan, James Maslar

Jason R. Hattrick-Simpers

An optical cell is described for high-throughput backscattering Raman spectroscopic measurements of hydrogen storagematerials at pressures up to 10 MPa and temperatures up to 823 K. High throughput is obtained by employing a 60 mm diameter × 9 mm thick sapphire window, with a corresponding 50 mm diameter unobstructed optical aperture. To reproducibly seal this relatively large window to the cell body at elevated temperatures and pressures, a gold o-ring is employed. The sample holder-to-window distance is adjustable, making this cell design compatible with optical measurement systems incorporating lenses of significantly different focal lengths, e.g., microscope objectives and single element …

A Combinatorial Characterization Scheme For High-Throughput Investigations Of Hydrogen Storage Materials, Jason Hattrick-Simpers, Zhuopeng Tan, Hiroyuki Oguchi, Chun Chiu, Edwin Heilweil, James Maslar, Leonid Bendersky

Jason R. Hattrick-Simpers

No abstract provided.

Physicochemical Characterization And Thermal Behavior Of Biodiesel And Biodiesel–Diesel Blends Derived From Crude Moringa Peregrina Seed Oil

Faculty of Engineering University of Malaya

Moringaceae is a monogeneric family with a single genus i.e. Moringa. This family includes 13 species. All these species are known as medicinal, nutritional and water purification agents. This study reports, for the first time, on characterization of the biodiesel derived from crude Moringa peregrina seed oil and its blends with diesel. The crude oil was converted to biodiesel by the transesterification reaction, catalyzed by potassium hydroxide. High ester content (97.79%) was obtained. M. peregrina biodiesel exhibited high oxidative stability (24.48 h). Moreover, the major fuel properties of M. peregrina biodiesel conformed to the ASTM D6751 standards. However, kinematic viscosity …

A Versatile Microparticle-Based Immunoaggregation Assay For Macromolecular Biomarker Detection And Quantification, Haiyan Wu, Yu Han, George G. Chase, Qiong Tang, Chen-Jung Lee, Bin Cao, Jiang Zhe, Gang Cheng

Mechanical Engineering Faculty Research

The rapid, sensitive and low-cost detection of macromolecular biomarkers is critical in clinical diagnostics, environmental monitoring, research, etc. Conventional assay methods usually require bulky, expensive and designated instruments and relative long assay time. For hospitals and laboratories that lack immediate access to analytical instruments, fast and low-cost assay methods for the detection of macromolecular biomarkers are urgently needed. In this work, we developed a versatile microparticle (MP)-based immunoaggregation method for the detection and quantification of macromolecular biomarkers. Antibodies (Abs) were firstly conjugated to MP through streptavidin-biotin interaction; the addition of macromolecular biomarkers caused the aggregation of Ab-MPs, which were subsequently …

Impact Of In Situ Physical And Chemical Cleaning On Pvdf Membrane Properties And Performances

Faculty of Engineering University of Malaya

Appropriate selection of cleaning agent is an important factor to achieve a better cleaning efficiency and this topic has become an ongoing discussion. This work assesses the impacts of sodium hydroxide (NaOH) and sodium hypochlorite (NaOCl) aqueous solution towards polyvinylidene fluoride (PVDF) stability at the typical concentrations used in membrane cleaning. The cleaned membranes were characterised using held emission scanning electron microscopy (FESEM), Fourier transform infrared (FTIR), pure water flux measurement, contact angle, protein retention and tensile testing. Membrane cleaned at elevated temperature and higher concentration presented a higher water flux than the virgin membrane which can be a worrying …

Impact Of In Situ Physical And Chemical Cleaning On Pvdf Membrane Properties And Performances

Faculty of Engineering University of Malaya

Appropriate selection of cleaning agent is an important factor to achieve a better cleaning efficiency and this topic has become an ongoing discussion. This work assesses the impacts of sodium hydroxide (NaOH) and sodium hypochlorite (NaOCl) aqueous solution towards polyvinylidene fluoride (PVDF) stability at the typical concentrations used in membrane cleaning. The cleaned membranes were characterised using held emission scanning electron microscopy (FESEM), Fourier transform infrared (FTIR), pure water flux measurement, contact angle, protein retention and tensile testing. Membrane cleaned at elevated temperature and higher concentration presented a higher water flux than the virgin membrane which can be a worrying …

Modeling Of Biomass Torrefaction And Pyrolysis And Its Applications, Jordan L. Klinger

Dissertations, Master's Theses and Master's Reports - Open

Utilizing biomass provides a possible near-term alternative solution for fossil energy dependence in both electricity generation and transportation. Though thermochemical conversion can produce solid/liquid fuels that are compatible in existing infrastructure, detailed scientific chemical and mechanistic understanding are still being developed. In contribution to these efforts, this work is focused on development of a semiempirical, lumped parameter, chemical kinetic model to describe the degradation of woody biomass.

The initial kinetic model was developed in the torrefaction region to describe the gas-phase evolution of products (water, organic acids, permanent gases, and furfural) through a three consecutive reaction model. In this model, …

Coalescence-Induced Jumping Of Droplet: Inertia And Viscosity Effects, Samaneh Farokhirad, Jeffrey F. Morris, Taehun Lee

Publications and Research

The problem of coalescence-induced self-propelled jumping of droplet is studied using three-dimensional numerical simulation. The focus is on the effect of inertia and in particular the effect of air density on the behavior of the merged droplet during jumping. A lattice Boltzmann method is used for two identical, static micro-droplets coalescing on a homogeneous substrate with contact angle ranging from 0◦ to 180◦. The results reveal that the effect of air density is significant on detachment of the merged droplet from the substrate at the later stage of the jumping process; the larger the air density, the larger the jumping …

Properties Of Zn-Bi Composite Coatings Prepared By Ionic Co-Discharge Deposition

Faculty of Engineering University of Malaya

Zn-Bi composite was synthesized by ionic co-discharge deposition and its properties were investigated. The results show that the Zn-Bi composite with the incorporation of Bi has a finer grain size than the pure Zn coating and improves the mechanical properties. The microhardness is increased by approximately two times simply by adding a small amount of Bi electrolyte into a Zn bath solution. A lower volume loss of the Zn-Bi composite coating compared with the pure Zn coating also indicates that the Zn-Bi coating has a better wear resistance. Link to Full-Text Articles : http://www.sciencedirect.com/science/article/pii/S1003632615635968

Thermal And Dynamic Mechanical Properties Of Grafted Kenaf Filled Poly (Vinyl Chloride)/Ethylene Vinyl Acetate Composites

Faculty of Engineering University of Malaya

The effects of kenaf and poly (methyl methacrylate grafted kenaf on the thermal and dynamic mechanical properties of poly (vinyl chloride), PVC and ethylene vinyl acetate, EVA blends were investigated. The PVC/EVA/kenaf composites were prepared by mixing the grafted and ungrafted kenaf fiber and PVC/ EVA blend using HAAKE Rheomixer at a temperature of 150 degrees C and the rotor speed at 50 rpm for 20 min. The composites were subjected to Differential Scanning Calorimetric (DSC), Thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), Fourier transform infrared (FTIR) and Scanning Electron Microscopy (SEM) studies. The DSC data revealed that the crystallinity …