Polymer and Organic Materials Commons^™

Super-Hydrophobic Hybrid Coatings Preparation Used By Methyltrithoxysilane (Mtes) And Tetraethylorthosilicate(Teos), Quanwei Li

International Conference on Durability of Concrete Structures

超疏水材料由于其优异的疏水自洁性能，在航空航天、海洋工程、除冰防腐等领域具有广阔的应用前景。本文采用简单的溶胶-凝胶制备超疏水涂层。 . 以甲基三乙氧基硅烷（MTES）和原硅酸四乙酯（TEOS）为前驱体，水解缩合后形成粗糙结构，1H,1H,2H,2H-全氟癸基三乙氧基硅烷（FAS）为低表面能的表面活性剂，系统研究了各自的最佳配比零件。涂层的疏水性和形貌分别通过水接触角测量、扫描电子显微镜（SEM）表征。同时，其官能团通过红外光谱表征。基于大量的实验和优化测试，

Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Application of Computational Tools to Spaghetti-Based Truss Design

Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the …

Thienoisatin Oligomers As N-Type Molecular Semiconductors, Natalie M. Kadlubowski, Xuyi Luo, Jianguo Mei

The Summer Undergraduate Research Fellowship (SURF) Symposium

Organic field effect transistors (OFETs) offer many advantages compared to traditional inorganic transistors, such as flexibility and solution processability. In this study we design and synthesize two thienoisatin-based organic semiconducting small molecules, then investigate their electronic properties in n-type OFETs. To introduce n-type charge transport, electron-withdrawing dicarbonitrile moieties were installed on thienoisoindigo and bis-thienoisatin molecules, which led to a quinoidal conjugation on thienoisoindigo, while maintaining an aromatic conjugation on the bis-thienoisatin. Following the syntheses, the molecules were characterized to determine highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels via cyclic voltammetry, as well as any potential …

Validation Of Wrinkling-To-Delamination Adhesion Measurement Technique, Allison Chau, Hyeyoung Son, Chelsea S. Davis

The Summer Undergraduate Research Fellowship (SURF) Symposium

Polymer thin films have a wide range of applications that span several different industries. Their optical clarity as well as their mechanical rigidness result in their versatile use in applications such as contact lenses, wearable sensors, and flexible electronics. These applications require precise adhesion, so the need for a simple, quantitative adhesion measurement technique is critical. Several methods have already been developed that quantify the adhesion of flexible thin films attached to rigid substrates. However, when the thin films are rigid and the substrates compliant, these methods are insufficient. In the authors’ previous work, an adhesion measurement technique was developed …

Developing Strategies To Toughen Bio-Inspired Adhesives, Narelli P. Narciso, Samuel Lee Huntington, Jonathan J. Wilker

The Summer Undergraduate Research Fellowship (SURF) Symposium

Mussels and other marine creatures adhere very well in underwater environments, having the ability to withstand the force of the sea. These animals have inspired synthetic biomimetic adhesives for wet systems, presenting potential for biomedical applications. However, most current commercial adhesives tend to be brittle, not resisting repetitive movements. This study assesses toughening strategies to improve the mussel-inspired adhesives’ ductility while maintaining its strength. The strategies included altering the polymer’s chemical structure by changing the percentage of polyethylene glycol (PEG) in the molecule and by adding fillers, such as calcium carbonate, silica and nacre - a calcium carbonate compound found …

Structure-Force Field Generator For Molecular Dynamics Simulations, Carlos M. Patiño, Lorena Alzate, Alejandro Strachan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Atomistic and molecular simulations have become an important research field due to the progress made in computer performance and the necessity of new and improved materials. Despite this, first principle simulations of large molecules are still not possible because the high computational time and resources required. Other methods, such as molecular dynamics, allow the simplification of calculations by defining energy terms to describe multiple atom interactions without compromising accuracy significantly. A group of these energy terms is called a force field, and each force field has its own descriptions and parameters. The objective of this project was to develop a …

Study On Mechanical Properties Of Silicone Rubber Materials Used As Gaskets In Pem Fuel Cell Environment, Guo Li

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Analysis Of Optimal Process Conditions And Mechanical Properties On Nanocomposites According To Structural Changes Of Halloysite Nanotubes, Yun-Hae Kim, Soo-Jeong Park, Antonio Norio Nakagaito

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Characterization Of Superabsorbent Polymers In Aluminum Solutions, Nicholas D. Macke, Matthew J. Krafcik, Kendra A. Erk

The Summer Undergraduate Research Fellowship (SURF) Symposium

Over the past few decades, super absorbent polymers (SAPs) have been the topic of research projects all around the world due to their incredible ability to absorb water. They have applications in everything from disposable diapers to high performance concrete. In concrete, aqueous cations permeate the polymer network, reducing swelling and altering properties. One of these ions, aluminum, alters SAP properties by creating a stiff outer shell and greatly reducing absorbency, but these effects have not been well characterized. One method of characterizing the effects of aluminum on SAP hydrogels was performing gravimetric swelling tests to determine equilibrium water capacity …

Characterization Of Suspension Polymerized Polyacrylamide And Poly(Sodium Acrylate-Acrylamide) Copolymer And Their Size Influence On The Properties Of Concrete, Cole R. Davis, Kendra A. Erk, Stacey L. Kelly

The Summer Undergraduate Research Fellowship (SURF) Symposium

Shrinkage leading to cracking and mechanical instability is a major problem for concrete due to the loss of water during the curing process. However, through the addition of Superabsorbent Polymer (SAP) hydrogels, shrinkage can be prevented, increasing the strength of concrete. Characterization of suspension polymerized polyacrylamide (PAM) poly(sodium acrylate-polyacrylamide) (PANa-PAM) copolymer microsphere sizes, morphology and swelling behavior was conducted before adding them to concrete. Size was determined using microscopy paired with ImageJ analysis. Coulter Counter size characterization was also used to determine the particle size distribution. Swelling behavior was determined using the tea bag method as well as size analysis …

Study Of Oxidative-Crosslink Reaction In Polyphenyl Sulfide (Pps) / Carbon Fiber And Its Influence In Additive Manufacturing, Dong Hee Kim, Eduardo Barocio, Bastian Brenken, Anthony Favaloro, Byron Pipes

The Summer Undergraduate Research Fellowship (SURF) Symposium

Ever since its development in 1980s, Fused Filament Fabrication (FFF) has been an attractive additive manufacturing technology due to its flexibility to create intricate shapes at lower costs and faster manufacturing process than subtractive techniques. These advantages make FFF suitable for printing molds for use in traditional composites manufacturing processes. Combining FFF with high-temperature thermoplastic composites enables producing molds that not only sustain autoclave conditions but also have low coefficient of thermal expansion (CTE). A semi-crystalline polymer, Poly-phenylene Sulfide (PPS), with 50% by weight of carbon fiber is used as feedstock material for FFF. Nonetheless, PPS is sensitive to undergo …

Fracture Mechanics-Based Simulation Of Pv Module Delamination, Dominic I. Jarecki, Johanna B. Palsdottir, Peter Bermel, Marisol Koslowski

The Summer Undergraduate Research Fellowship (SURF) Symposium

Photovoltaic (PV) cells are rapidly growing as a renewable alternative to fossil fuels like coal, oil, and natural gas. However, greater adoption has also reduced government subsidies, placing the onus of making solar panels economically competitive on innovative research. While multiple methods have been considered for reducing costs, with each reduction in cost comes the associated peril of reduction in quality and useful lifetime. Several problems considered solved have now resurfaced as potential failure mechanisms with the introduction of cheaper PV cell technologies. However, to remain economically viable, PV modules will not only have to become cheaper, they will have …

Synthesis, Characterization, And Thermoelectric Properties Of Radical Siloxanes, Arnold J. Eng, Bryan Boudouris, Edward P. Tomlinson, Martha Emily Hay

The Summer Undergraduate Research Fellowship (SURF) Symposium

More than half of the annual energy consumption in the United States is lost as waste heat. Polymer-based thermoelectric devices have the potential to utilize this waste heat both sustainably and cost-effectively. Although conjugated polymers currently dominate research in organic thermoelectrics, the potential of using polymers with radical pendant groups have yet to be realized. These polymers have been found to be as conductive as pristine (i.e., not doped) poly(3-hexylthiophene) (P3HT), a commonly-used charge-transporting conjugated polymer. This could yield promising avenues for thermoelectric material design as radical polymers are more synthetically tunable and are hypothesized to have a high Seebeck …

Characterization Of Hydrogel Curing Methods For Manufacturability, Hannah E. Brown, Rebecca K. Kramer, Edward L. White

The Summer Undergraduate Research Fellowship (SURF) Symposium

In the field of soft robotics, hydrogels possess material properties that allow them to function as both soft strain sensors and dielectric elastomer actuators. However, there is still much that needs to be understood about the curing process of hydrogels and the resulting material characteristics before manufacturing these devices can be accomplished. In this study, we investigated the effect of curing time and sample volume on the as-cured material properties of acrylamide-based hydrogels hydrated with lithium and magnesium chloride salt solutions. Samples were cured at room temperature, 60° C and 100° C, and the resulting changes in mechanical stiffness and …

Thermal And Mechanical Properties Of Polymers Using Molecular Dynamics, Daniel Glass, Alejandro Strachan, Lorena Alzate-Vargas, Chunyu Li, Benjamin Haley

The Summer Undergraduate Research Fellowship (SURF) Symposium

Polymer systems have gained attention during the past years because of their technological and industrial applications. Simulations, particularly molecular dynamics, are very useful for exploring properties of amorphous polymers, without using experiments. Our goal is to create a readily-available tool that will perform MD simulations in order to get thermal and mechanical properties (Glass transition temperature, Young Modulus) of the polymers. The work that has been done will be part of a tool to help people to learn about polymer properties including Glass Transition Temperature. We model some polymers at a scale of 10,000 atoms. The tool uses LAMMPS to …

Polymer-Based Thermoelectric Devices, Stuart W. Hilsmier, Edward P. Tomlinson, Bryan Boudouris

The Summer Undergraduate Research Fellowship (SURF) Symposium

Currently, over 50% of all energy generated in the US is lost as waste heat, and thermoelectric generators offer a promising means to recoup some of this energy, if their efficiency is improved. While organic thermoelectric materials lack the efficiency of their inorganic counterparts, they are composed of highly abundant resources and have low temperature processing conditions. Recently, a new class of redox-active polymers, radical polymers, has exhibited high electrical conductivity in an entirely amorphous medium. In addition, these radical polymers have a simple synthetic scheme and can be highly tunable to provide desired electrical properties. In this study, the …

Investigation Of Fracture And Healing Behavior Of Thermoreversible Gels Via Oscillation Rheology, Krithika Subramaniam, Travis Thornell, Kendra Erk

The Summer Undergraduate Research Fellowship (SURF) Symposium

Thermoreversible gels have the unique ability to self-heal, or repair themselves, once they are fractured. They are physically cross-linked, thus providing them with the capability to reform their broken bonds as a function of temperature. The objective of this project is to determine the extent of the gels’ recovery. If self-healing does in fact occur, these gels can be applied in various industries, including medicine for drug delivery or paints and coatings. The tri-block polymer poly(methyl methacrylate)-poly(n-butyl acrylate)-poly(methyl methacrylate) (PMMA-PnBA-PMMA) was heated and stirred with 2-ethyl-1-hexanol to create a polymer gel. Through the use of a rheometer, a shear stress …

Characterization Of Mechanical Properties Displayed In Body Armor Ballistic Fibers, Dawei Li, Matthew Hudspeth, Weinong Wayne Chen

The Summer Undergraduate Research Fellowship (SURF) Symposium

The current body armor systems manufactured using ballistic fibers are not performing as theoretical results predict and are causing injuries. The actual maximum projectile penetration speed that the body armor can endure is significantly lower than the theoretical maximum speed, thus causing a costly build-test relationship that is not aided with modeling design efforts. The main aim of this research is to determine the maximum penetration speeds for ballistic yarns and fabrics. Secondary aim is to examine the common assumption that during transverse impact, single fiber is under pure tension and shear stress is negligible. To examine aforementioned assumption, fibers …

Rheo-Piv Investigation Of Fracture And Self-Healing In A Triblock Copolymer Gel, Benjamin A. Helfrecht, Travis L. Thornell, Kendra A. Erk

The Summer Undergraduate Research Fellowship (SURF) Symposium

Physically associating polymer gels have shown the ability to heal after failure, making them promising candidates for various medical applications or consumer products. However, the processes by which these materials self-heal is not well-understood. This study seeks to explain the self-healing behavior of the triblock copolymer poly(methyl methacrylate)-poly(n-butyl acrylate)-poly(methyl methacrylate), or PMMA-PnBA-PMMA, by probing the material’s post-fracture behavior with rheometry and particle image velocimetry (PIV). The self-healing behavior was studied by deforming each gel in shear until failure multiple times with “recovery” periods in-between. PIV was used to verify the occurrence of each fracture in both time and space. Stress …

Simulation Of Bio-Inspired Porous Battery Separators, Yumeng Xie, Edwin Garcia, Aniruddha Jana

The Summer Undergraduate Research Fellowship (SURF) Symposium

Li-Ion rechargeable battery is one of the most-used rechargeable batteries around the industry of the world. The battery is most used in most electronic devices, electrical cars. But the battery separator is one of the mainly problem that limits the service life. If we can find the way to improve the performance of the battery separator, we can highly increase the service life of the Li-Ion battery. The goal of the project 'Simulation of Bio-Inspired Porous Battery Separators' is to generate a tool for users in order to create computer models of bio-inspired porous structures that resemble porous separators layer …

Cellulose Nanocrystals As A Material For Microencapsulation, Lauren C. Kennedy, Congwang Ye, Colton Steiner, Carlos Martinez

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cellulose is an abundant, biodegradable, and inexpensive renewable polymer that is light in weight with high mechanical strength (Habibi, Lucia, Rojas 2010). Full fibers of cellulose have been used in many products such as plastics and textiles for over a century and a half, but recently, modern extraction techniques have made it possible to investigate uses for minuscule cellulose fibers (Habibi, Lucia, Rojas 2010). Through acid hydrolysis, cellulose fibers become rod-like nanostructures with a high aspect ratio that are known as Cellulose Nanocrystals (CNCs) (Habibi, Lucia, Rojas 2010). Since CNCs are biodegradable and derive from a renewable resource, finding ways …

Next Generation Crystal Viewing Tool, Zach Schaffter, Gerhard Klimeck

The Summer Undergraduate Research Fellowship (SURF) Symposium

The science and engineering community is limited when it comes to crystal viewing software tools. Each tool lacks in a different area such as customization of structures or visual output. Crystal Viewer 2.0 was created to have all of these features in one program. This one tool simulates virtually any crystal structure with any possible material. The vtkvis widget offers users advanced visual options not seen in any other crystal viewing software. In addition, the powerful engine behind Crystal Viewer 2.0, nanoelectronic modeling 5 or (NEMO5), performs intensive atomic calculations depending on user input. A graphical user interface, or GUI, …

Efficiently Dispersing Carbon Nanotubes In Polyphenylene Sulfide, Kevin M. Sommer, R. Byron Pipes

The Summer Undergraduate Research Fellowship (SURF) Symposium

Thermal plastics are replacing conventional metals in the aerospace, sporting, electronics, and other industries. Thermal plastics are able to withstand relatively high temperatures, have good fatigue properties, and are lighter than metals. Unfortunately, they are not very electrically conductive. However, adding carbon nanotubes to thermal plastics such as polyphenylene sulfide (PPS) can drastically increase the plastic's conductivity at a low weight percent of nanotubes called the percolation threshold. The percolation threshold is the point where adding a little more carbon nanotubes brings together the network of nanotubes and greatly increases the conductivity. We need to learn how to increase the …

Testing Self Healing Properties In Polymers, Hamsini Gopalakrishna, John Blendell

The Summer Undergraduate Research Fellowship (SURF) Symposium

Mussels and barnacles have the ability to stick to underwater surfaces with the help of a cross-linked protein structure. Reduction in the plastic consumption can be achieved by using toughened polymers. Synthesized cross-linking polymers can be used for underwater adhesion by mimicking the protein structure used by mussels and barnacles. One such polymer is poly(3,4-dihydroxystyrene-co-styrene) having enhanced toughness. Traditionally, blister tests measure the adhesion between a substrate to a surface but this was modified to serve as the driving force to drive crack propagation in controlled flaws. The modified blister tests were carried out on polystyrene (PS) samples. Once the …

Interfacial Rheological Mechanics Of A Non-Ionic, Tri-Block Copolymer At Water/Hexadecane Interface, Jerome J. Nash, Kendra Erk

The Summer Undergraduate Research Fellowship (SURF) Symposium

Growing interest on the stability of foams and emulsions has lead to concentrated research of interfacial rheology. The response of an interfacial layer to mechanical deformation in size and shape is dependent on its composition. [Miller 2010] This research analysis focused on the adsorption and rheological mechanics of the non-ionic, tri-block copolymer, Pluronic 17R4 at the water/hexadecane interface. The adsorption and viscoelastic properties of the interface were measured via methods of pendant drop tensiometry and dynamic oscillation with drop shape analysis software. Interfacial tension measurements were taken to study the surface pressures of Pluronic 17R4 solutions with concentrations ranging from …

Interfacial Energy Between Carbon Nanotubes And Polymers Measured From Nanoscale Peel Tests In The Atomic Force Microscope, Mark C. Strus, Camilo I. Cano, R. Byron Pipes, Cattien V. Nguyen, Arvind Raman

Other Nanotechnology Publications

The future development of polymer composite materials with nanotubes or nanoscale fibers requires the ability to understand and improve the interfacial bonding at the nanotube-polymer matrix interface. In recent work [Strus MC, Zalamea L, Raman A, Pipes RB, Nguyen CV, Stach EA. Peeling force spectroscopy: exposing the adhesive nanomechanics of one-dimensional nanostructures. Nano Lett 2008;8(2):544–50], it has been shown that a new mode in the Atomic Force Microscope (AFM), peeling force spectroscopy, can be used to understand the adhesive mechanics of carbon nanotubes peeled from a surface. In the present work, we demonstrate how AFM peeling force spectroscopy can be …