Engineering Science and Materials Commons^™

External Direct Sum Invariant Subspace And Decomposition Of Coupled Differential-Difference Equations, Keqin Gu, Huan Phan-Van

SIUE Faculty Research, Scholarship, and Creative Activity

This article discusses the invariant subspaces that are restricted to be external direct sums. Some existence conditions are presented that facilitate finding such invariant subspaces. This problem is related to the decomposition of coupled differential-difference equations, leading to the possibility of lowering the dimensions of coupled differential-difference equations. As has been well documented, lowering the dimension of coupled differential-difference equations can drastically reduce the computational time needed in stability analysis when a complete quadratic Lyapunov-Krasovskii functional is used. Most known ad hoc methods of reducing the order are special cases of this formulation.

Structured Invariant Subspace And Decomposition Of Systems With Time Delays And Uncertainties, Huan Phan-Van, Keqin Gu

SIUE Faculty Research, Scholarship, and Creative Activity

This article discusses invariant subspaces of a matrix with a given partition structure. The existence of a nontrivial structured invariant subspace is equivalent to the possibility of decomposing the associated system with multiple feedback blocks such that the feedback operators are subject to a given constraint. The formulation is especially useful in the stability analysis of time-delay systems using the Lyapunov-Krasovskii functional approach where computational efficiency is essential in order to achieve accuracy for large scale systems. The set of all structured invariant subspaces are obtained (thus all possible decompositions are obtained as a result) for the coupled differential-difference equations …

Optimal Temperature-Actuated Control Of A Thermally-Insulated Roller Blind, Hani Alkhatib, Philippe Lemarchand, Brian Norton, Dominic O'Sullivan

Articles

By altering the thermal equilibria between internal and ambient environments, dynamic insulation can minimize heating and cooling building energy requirements. The performance of a thermally-insulated roller blind was evaluated both experimentally and via simulation studies. The variation of blind position was optimized to minimize building energy consumption, maintain thermal comfort, and minimize daylight discomfort for a particular system, location and conditions. The roller blind was adjusted between four positions, from fully-open to fully-closed, optimal indoor temperature switching thresholds found for moving to these blind positions were 15 °C, 18.4 °C, 19.4 °C and 21.4 °C, respectively. Using these resulted in …

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Survey Data: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A survey was conducted to determine the preferred set point temperature and heating pattern among Irish households. The survey was sent to 237 people living across Ireland, out of which 32 respondents skipped the survey and 9 surveys were found to be incomplete. Amongst the counties in Ireland 71.1% respondents were from Dublin, 6.34% from Kildare, 5% from Meath, 5% from Wicklow and in all the remaining counties response rate was below 2%. Part 1: This section of the survey recorded information regarding characteristics of the building such as house type, wall type, insulation type, period the house was built. …

Fem Eem Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A large number of combinations of Irish wall types, insulation materials, and heating fuel types were produced to compare the multiple variables which influence Optimal Insulation Thickness values. The total cost (TC) and carbon emission (CE) at optimum insulation thickness (OIT) for all combinations of insulation material and three types of fuel are considered. The dataset presents OIT for solid wall, cavity wall and cavity block wall types located in Monaghan, Dublin, and Kerry.

Coupling Methylammonium And Formamidinium Cations With Halide Anions: Hybrid Orbitals, Hydrogen Bonding, And The Role Of Dynamics, Chinnathambi Kamal, Dirk Hauschild, Linsey Seitz, Ralph Steininger, Wanli Yang, Clemens Heske, Lothar Weinhardt, Michael Odelius

Chemistry and Biochemistry Faculty Research

The electronic structures of four precursors for organic-inorganic hybrid perovskites, namely, methylammonium chloride and iodide, as well as formamidinium bromide and iodide, are investigated by X-ray emission (XE) spectroscopy at the carbon and nitrogen K-edges. The XE spectra are analyzed based on density functional theory calculations. We simulate the XE spectra at the Kohn-Sham level for ground-state geometries and carry out detailed analyses of the molecular orbitals and the electronic density of states to give a thorough understanding of the spectra. Major parts of the spectra can be described by the model of the corresponding isolated organic cation, whereas high-emission …

Lecture 00: Opening Remarks: 46th Spring Lecture Series, Tulin Kaman

Mathematical Sciences Spring Lecture Series

Opening remarks for the 46th Annual Mathematical Sciences Spring Lecture Series at the University of Arkansas, Fayetteville.

Current-Driven Production Of Vortex-Antivortex Pairs In Planar Josephson Junction Arrays And Phase Cracks In Long-Range Order, Francisco Estellés-Duart, Miguel Ortuño, Andrés M. Somoza, Valerii M. Vinokur, Alex Gurevich

Physics Faculty Publications

Proliferation of topological defects like vortices and dislocations plays a key role in the physics of systems with long-range order, particularly, superconductivity and superfluidity in thin films, plasticity of solids, and melting of atomic monolayers. Topological defects are characterized by their topological charge reflecting fundamental symmetries and conservation laws of the system. Conservation of topological charge manifests itself in extreme stability of static topological defects because destruction of a single defect requires overcoming a huge energy barrier proportional to the system size. However, the stability of driven topological defects remains largely unexplored. Here we address this issue and investigate numerically …

A Dynamical System Approach For Resource-Constrained Mobile Robotics, Tauhidul Alam

FIU Electronic Theses and Dissertations

The revolution of autonomous vehicles has led to the development of robots with abundant sensors, actuators with many degrees of freedom, high-performance computing capabilities, and high-speed communication devices. These robots use a large volume of information from sensors to solve diverse problems. However, this usually leads to a significant modeling burden as well as excessive cost and computational requirements. Furthermore, in some scenarios, sophisticated sensors may not work precisely, the real-time processing power of a robot may be inadequate, the communication among robots may be impeded by natural or adversarial conditions, or the actuation control in a robot may be …

Development Of The End-Effector Of A Cable-Driven Parallel Manipulator For Automated Crop Sensing, Iman Salafian

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

A four cable-driven parallel manipulator (4CDPM), consisting of sophisticated spectrometers and imagers, is under development for use in acquiring phenotypic and environmental data over an acre-sized maize field. This thesis presents the design, controls, and testing of two sub-systems in a 4CDPM: a Center of Mass Balance System (CMBS) and a Drop-Down System (DDS).

One of the factors that influences stability is the center of mass (COM) position of the end effector. An offset in COM can cause a pendulum effect or an undesired tilt angle. A center of mass balancing system is presented in this thesis to minimize the …

Kinetic Energy Investigation, Mike Jackson

High School Lesson Plans

Students will build a mouse trap powered car that converts elastic potential energy contained in the trap’s spring to linear kinetic energy of the car. The release of this energy results in a net force which leads to linear acceleration. This acceleration can be measured with Vernier Logger Pro®, and using Newton’s Second Law of Motion, the net force can be calculated. Finally, using the concept of work, the final kinetic energy of the car can be calculated. Once students become familiar with the calculation of work and energy, the teacher will challenge the students to modify their cars to …

Compact Facility For Testing Steady And Transient Thermal Performance Of Building Walls, Aimee Byrne, Gerard Byrne, Anthony Robinson

Articles

Energy efficiency retrofit of buildings represents a key effort in reducing EU energy demand by 20% by 2020. However, predictions tend to overestimate savings by large percentages. The shortfall in savings can be attributed to incorrect predictive techniques, comfort takeback along with other behavioural and workmanship variables. Common predictive techniques related to heat loss tend to be based on the U-value of the building envelope. This paper presents the design of a more straightforward and compact version of the traditional Hot-Box apparatus (measures U-value) which instead determines the thermal resistance of samples of building envelope. U-value includes the need to …

Design And Commissioning Of A Community Scale Solar Powered Membrane-Based Water Purification System In Haiti, Shavin Pinto, Yung Wong, Kyle Fennesy, Yan Tang, Marc Compere

Publications

This paper presents the design and commissioning of a solar powered water purification system at the Ryan Epps Home for Children (REHC) in Michaud, Haiti. This system supplies clean drinking water to the 200 children who live and go to school at REHC and also to the community in the form of a micro-business. This micro-business is the mechanism for income generation for sustainable system operation. The purifier uses a three stage filtration system with a disc-type sediment filter, a 0.1 micron ultrafiltration membrane, and an ultraviolet light for disinfection. The backwash cycle extends the life of the ultrafiltration membrane …

Case Studies Of Cavity And External Wall Insulation Retrofitted Under The Irish Home Energy Saving Scheme: Technical Analysis And Occupant Perspectives, Aimee Byrne, Gerard Byrne, Garrett O'Donnell, Anthony Robinson

Articles

The residential sector represents 27% of primary energy consumption in Ireland. This paper examines the case study of the Irish government’s national grant scheme to encourage energy efficiency retrofit in private housing. That is the Home Energy Saving (HES) Scheme, later rebranded the Better Energy: Homes (BEH) Scheme. The methodology involved monitoring several homes immediately before and after retrofit alongside discussions with occupants. The examination focused on specific measures commonly introduced through the HES/BEH programme − cavity and external wall insulation. It has been found that a significant decrease in heat loss through the walls was measured in all cases. …

Intensity And Resolution Enhancement Of Local Regions For Object Detection And Tracking In Wide Area Surveillance, Evan Krieger, Vijayan K. Asari, Saibabu Arigela, Theus H. Aspiras

Electrical and Computer Engineering Faculty Publications

Object tracking in wide area motion imagery is a complex problem that consists of object detection and target tracking over time. This challenge can be solved by human analysts who naturally have the ability to keep track of an object in a scene. A computer vision solution for object tracking has the potential to be a much faster and efficient solution. However, a computer vision solution faces certain challenges that do not affect a human analyst. To overcome these challenges, a tracking process is proposed that is inspired by the known advantages of a human analyst.

First, the focus of …

Almost Sure Asymptotic Stabilization Of Differential Equations With Time-Varying Delay By Lévy Noise, Dezhi Liu, Weiqun Wang, Jose Luis Menaldi

Mathematics Faculty Research Publications

This paper aims to determine that the Lévy noise can stabilize the given differential equations with time-varying delay, which has generalized the Brownian motion case. An analysis is developed and sufficient conditions on the stabilization for stochastic differential equations with time-varying delay are presented. Our stabilization criteria is in terms of linear matrix inequalities (LMIs), whence the feedback controls can be designed more easily in practice.

Blast-Induced Mild Traumatic Brain Injury Through Ear Canal: A Finite Element Study, Praveen Akula, Yi Hua, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Purpose The role of ear canal in transmitting blast waves to the brain is not clear. The goal of this work is to characterize the influence of ear canal on blast-induced mild traumatic brain injury through a computational approach.

Methods A three-dimensional human head model with single-side ear canal details was reconstructed from computed tomography images. The ear canal was positioned either facing the incident blast wave or facing away from the blast wave.

Results The blast wave-head interaction has demonstrated that the overpressure within the ear canal was substantially amplified when the ear directly faced the blast wave. When …

An Agent Based Approach For Simulating Demo Enterprise Models, Mamadou Seck, Joseph Barjis

Engineering Management & Systems Engineering Faculty Publications

DEMO (design and engineering methodology for organization) is a theoretically grounded methodology for rigorous enterprise modeling. It provides relevant concepts from a construction perspective. As the methodology gains a wider audience, there is a growing interest in simulating DEMO models. Most attempts to develop a simulation approach for enterprise models in general, and the DEMO methodology in particular, are based on process oriented conceptualizations that are typically implementation in a discrete event paradigm. In this paper, we propose a conceptual framework for the translation of DEMO models into an agent based simulation. We will describe the DEMO methodology in some …

Modeling The Impact Of Simulated Educational Interventions On The Use And Abuse Of Pharmaceutical Opioids In The United States: A Report On Initial Efforts, Wayne Wakeland, Alexandra E. Nielsen, Teresa D. Schmidt, Dennis Mccarty, Lynn Webster, John Fitzgerald, J. David Haddox

Systems Science Faculty Publications and Presentations

Three educational interventions were simulated in a system dynamics model of the medical use, trafficking, and nonmedical use of pharmaceutical opioids. The study relied on secondary data obtained in the literature for the period of 1995 to 2008 as well as expert panel recommendations regarding model parameters and structure. The behavior of the resulting systems-level model was tested for fit against reference behavior data. After the base model was tested, logic to represent three educational interventions was added and the impact of each intervention on simulated overdose deaths was evaluated over a 7-year evaluation period, 2008 to 2015. Principal findings …

Use Of Comsol Simulation For Undergraduate Fluid Dynamics Course, Hyun J. Kwon

Faculty Publications

The COMSOL software was used to introduce CFD and teach fluid dynamics more effectively. Introduction of CFD has become an important part of fluid dynamics in recent years; however, undergraduate students have less access to practical exposure to it, unless they take additional elective courses which are seldom offered in undergrad predominant institutes. Simulation has become an essential step in designing and optimizing process in many engineering problems. Therefore, the COMSOL simulation project was assigned to undergraduate CFD as a part of their term project to enhance their exposure to simulation software and help understanding the use of simulation on …

Relationship Between Impact Energy And Fracture Toughness Of Prestressed Concrete Railway Sleepers, Sakdirat Kaewunruen, Alexander Remennikov

Faculty of Engineering - Papers (Archive)

The prestressed concrete sleepers (or railroad ties), which are installed in railway track systems as the crosstie beam support, are designed to carry and transfer the wheel loads from the rails to the ground. It is well known that railway tracks are subject to impact loading conditions, which are attributable to the train operations with either wheel or rail abnormalities such as flat wheels, dipped rails, etc. These loads are of very high magnitude but short duration. In addition, there exists the potential of repeated load experience during the design life of prestressed concrete sleepers. Prestressed concrete has played a …

Multiscale Modeling Of Impact On Heterogeneous Viscoelastic Solids With Evolving Microcracks, Flavio V. Souza

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Multiscale computational techniques play a major role in solving problems related to viscoelastic composite materials due to the complexities inherent to these materials. In the present work, a numerical procedure for multiscale modeling of impact on heterogeneous viscoelastic solids containing evolving microcracks is proposed in which the (global scale) homogenized viscoelastic incremental constitutive equations have the same form as the local scale viscoelastic incremental constitutive equations, but the homogenized tangent constitutive tensor and the homogenized incremental history dependent stress tensor depend on the amount of damage accumulated at the local scale. Furthermore, the developed technique allows the computation of the …

Identification Of Multiple Oscillation States Of Carbon Nanotube Tipped Cantilevers Interacting With Surfaces In Dynamic Atomic Force Microscopy, Mark Strus, Arvind Raman

Birck and NCN Publications

Carbon nanotubes (CNTs) have gained increased interest in dynamic atomic force microscopy (dAFM) as sharp, flexible, conducting, nonreactive tips for high-resolution imaging, oxidation lithography, and electrostatic force microscopy. By means of theory and experiments we lay out a map of several distinct tapping mode AFM oscillation states for CNT tipped AFM cantilevers: namely, noncontact attractive regime oscillation, intermittent contact with CNT slipping or pinning, or permanent contact with the CNT in point or line contact with the surface while the cantilever oscillates with large amplitude. Each state represents fundamentally different origins of CNT-surface interactions, CNT tip-substrate dissipation, and phase contrast …

Dynamic Design Guidelines For Prestressed Concrete Sleepers, Alexander Remennikov, Martin H. Murray, Sakdirat Kaewunruen

Faculty of Engineering - Papers (Archive)

Current design philosophy, outlined in AS 1085.14, is based on the analysis of permissible stresses resulting from quasi-static wheel loads and essentially the static response of concrete sleepers. In general, cracking can incur when the bottom fibre stress is larger than tensile strength of concrete. Premature cracking of prestressed concrete sleepers has been detected in railway tracks. The major cause of cracking is the infrequent but high-magnitude wheel loads produced by a small percentage of “out-of-round” wheels or railhead surface defects, which are crudely accounted for in AS 1085.14 by a single load factor. Based on the current design method, …

Hand-Held Flyback Driven Coaxial Dielectric Barrier Discharge: Development And Characterization, Victor J. Law, Vladimir Milosavljevic, Neil O’Connor, James F. Lalor, Steven Daniels

Articles

The development of a handheld single and triple chamber atmospheric pressure coaxial dielectric barrier discharge driven by Flyback circuitry for helium and argon discharges is described. The Flyback uses external metal-oxide-semiconductor field-effect transistor power switching technology and the transformer operates in the continuous current mode to convert a continuous dc power of 10–33 W to generate a 1.2–1.6 kV 3.5 μs pulse. An argon discharge breakdown voltage of ∼768 V is measured. With a 50 kHz, pulse repetition rate and an argon flow rate of 0.5–10 argon slm (slm denotes standard liters per minute), the electrical power density deposited in …

Comparison Of Vacuum Glazing Thermal Performance Predicted Using Two- And Three-Dimensional Models And Their Experimental Validation, Brian Norton, Philip Eames, Yueping Fang, Trevor Hyde, Neil Hewitt

Conference Papers

The thermal performance of vacuum glazing was predicted using two dimensional (2-D) finite element and three dimensional (3-D) finite volume models. In the 2-D model, the vacuum space, including the pillar arrays, was represented by a material whose effective thermal conductivity was determined from the specified vacuum space width, the heat conduction through the pillar array and the calculated radiation heat transfer between the two interior glass surfaces within the vacuum gap. In the 3-D model, the support pillar array was incorporated and modeled within the glazing unit directly. The difference in predicted overall heat transfer coefficients between the two …

Experimental And Finite Element Analysis Of Preloaded Bolted Joints Under Impact Loading, Brendan O'Toole, Kumarswamy Karpanan, Masoud Feghhi

Mechanical Engineering Faculty Research

One of the primary parameters in analyzing bolted joints is preload in the bolt. We have considered several possible preload modeling techniques to analyze the effect of preload on the dynamic response of the bolted joints. Five different methods of applying preload in the nonlinear finite element analysis are evaluated. These methods are “force on bolt and nut”, “force on bolt shank”, “interference fit”, “thermal gradient” and “initial stress method”. Explicit and implicit analyses are used for transient response and preload generation in bolt respectively. Time history and shock response spectrum are used to compare experimental and simulation results. Simulation …

The Case For Thoroughly Testing Complex System Dynamic Models, Wayne Wakeland, Megan Hoarfrost

Systems Science Faculty Publications and Presentations

In order to determine whether model testing is as useful as suggested by modeling experts, the full battery of model tests recommended by Forrester, Senge, Sterman, and others was applied retrospectively to a complex previously-published system dynamics model. The time required to carry out each type of test was captured, and the benefits that resulted from applying each test was determined subjectively. The resulting benefit to cost ratios are reported. These ratios suggest that rather than focusing primarily on sensitivity testing, modelers should consider other types of model tests such as extreme condition tests and family member tests. The study …

On Misorientation Distribution Evolution During Anisotropic Grain Growth, Elizabeth A. Holm, Gregory N. Hassold, Mark A. Miodownik

Physics Publications

In order to study the development of texture and boundary character during annealing, three-dimensional grain crystallography and crystallographically mediated grain boundary properties were incorporated into a finite temperature Monte Carlo model for grain growth. Randomly textured microstructures evolve normally, with growth exponent n=0.96. While texture remains random, the steady-state boundary misorientation distribution favors low-angle boundaries. To first order, low-angle boundaries increase by lengthening, not by proliferating. In contrast, microstructures with a strong single-component texture develop four-grain junctions and highly curved grain boundaries, which alter evolution. The boundary misorientation distribution narrows and shifts to low angles, and no steady state …