Controls and Control Theory Commons^™

Computer Training Systems For Training Engineering Personnel For Control Industrial Enterprises, Yusuf Shodiyevich Avazov, Kamola Rustamovna Abdullaeva

Chemical Technology, Control and Management

A principle has been proposed for constructing computer simulators for improving the qualifications of process control operators at industrial enterprises and for training students of higher educational institutions. The capabilities of a computer simulator that can be used as a digital assistant are revealed. Their architecture for building digital simulators is proposed. From the architecture it is clear that the computer simulator consists of two systems. The training process management system and the server of the computerized simulator are combined into a digital simulator. Simulators in this category provide student operators with the opportunity to develop skills in self-control of …

Obtaining Sweet Molasses By The Method Of Hydromechanical And Enzymatic Processing Of Grain, Sadritdin Maxamatdinovich Turabdjanov, Kamoliddin Ahmadjonovich Mahmudov, Bexzod Alisherovich Kasimov, Kasun Dissanayake Kumara

Chemical Technology, Control and Management

Methods of hydrolysis of grains to starch under the influence of hydrodynamic and enzymatic processes are logically based. Polysaccharides derived from starchy grains are known and popular in the food industry for their thickening and stabilizing properties. To date, studies that allow for a deeper understanding of the mechanism of interaction of polysaccharide-containing products with their main components, the effect on the set of rheological, organoleptic, physico-chemical properties of food products that determine their functions are relevant.

Development Of The Computer Model Of The Waste Water Treatment Process Using Ion-Exchange Resins In The Matlab Program, Jaloliddin Abdurazzakovich Eshbobaev, Bakhodir Tajiddinovich Khamidov, Adham Tilovovich Norkobilov, Orifjon Sharipovich Kodirov

Chemical Technology, Control and Management

In this work, a mathematical model of industrial wastewater treatment technology was formed. First, wastewater treatment technologies were analyzed and the technology of ion-exchange resin treatment was selected. A water purification device using ion-exchange resins was made, and tested on the Kungrad soda plant and the results were obtained. According to these results, it was determined that the cleaning coefficient of the device is up to 98-99%. In this article, a mathematical model of a wastewater treatment device using ion-exchange resins was developed using the stoichiometric matrix method. After the mathematical model of the process was found, a graph of …

The Morphology Analysis Of Soil In Remote Sensing Image Processing, Mirzayan Mirzaaxmedovich Kamilov, Mirzaakbar Xakkulmirzayevich Hudayberdiev, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article analyzed various techniques used in satellite image processing to analyze soil morphology. Analysis of soil morphology using satellite imagery plays a crucial role in soil science research, Land Management, and environmental monitoring. It provides an economical and efficient means of studying large-scale soil variability, providing information on land sustainable use, resource management and soil conservation decisions.

Application Of Evolutionary Algorithms For Optimization Of Operation Modes Of Regional Electric Power Systems, Isamiddin Khakimovich Siddikov, Oksana Vitalevna Porubay

Chemical Technology, Control and Management

The paper presents the possibilities of using evolutionary algorithms to solve the problem of optimizing the operation modes of electric power facilities in the presence of constraints in the form of inequalities and equalities. The limits of constraints have a variable character, depending on the generated and consumed energy. Existing methods used for the optimization of modes are based on general principles and approaches to optimization, which usually adapt to the specifics of the problem. In electric power facilities, optimization problems have some peculiarities, among which is the presence of multiple constraints applied to both independent and dependent variables. Many …

Evaluating Eeg–Emg Fusion-Based Classification As A Method For Improving Control Of Wearable Robotic Devices For Upper-Limb Rehabilitation, Jacob G. Tryon

Electronic Thesis and Dissertation Repository

Musculoskeletal disorders are the biggest cause of disability worldwide, and wearable mechatronic rehabilitation devices have been proposed for treatment. However, before widespread adoption, improvements in user control and system adaptability are required. User intention should be detected intuitively, and user-induced changes in system dynamics should be unobtrusively identified and corrected. Developments often focus on model-dependent nonlinear control theory, which is challenging to implement for wearable devices.

One alternative is to incorporate bioelectrical signal-based machine learning into the system, allowing for simpler controller designs to be augmented by supplemental brain (electroencephalography/EEG) and muscle (electromyography/EMG) information. To extract user intention better, sensor …

Topological Interpolation Method For Modeling Dynamic Systems, Isamiddin Xakimovich Siddikov, Dilnoza Maxamadjanovna Umurzakova

Chemical Technology, Control and Management

The method of simulation structural-complex continuous-discrete control systems is discussed. For simulation and calculation of dynamic processes in continuous-discrete systems topological interpolation method is proposed, based on application of hybrid methods of space of state variables and interpolation of signals. The essence of the method is that the dynamics of the investigated system, considered at the final interval, is broken down into subintervals, on each of which the processes are described by linear ordinary system differential equations. The computational efficiency of the proposed method was evaluated by comparison with standard methods such as the Runge-Kutta-Merson method. The use of this …

Prediction Using Fire Data Based On Machine Learning Algorithms, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

In this article, the process of real-time prediction of the dynamics of fire development in non-stationary and gas-fired areas is carried out by developing a real-time prediction method based on artificial intelligence and deep machine learning (Deep Machine Learning) algorithms. The most commonly used KNN algorithm, CVM algorithm, Random Forest algorithm and Naive Bayes algorithm were used for prediction fire situations.

Intellectualization Of The Process Of Monitoring Of Complex Technological Productions, Dmitry Semenovich Karpovich, Umidjon Abdimajitovich Ruziev

Chemical Technology, Control and Management

The article deals with the creation of intelligent monitoring systems for complex technological processes. The methods and models of the intellectualization of information processing systems are analyzed. The advantages of using intelligent measuring instruments in monitoring systems are given, which allow obtaining reliable information necessary for the effective control of complex technological processes. The issues of using intelligent measuring instruments in monitoring systems are considered. A block diagram of intelligent monitoring of signal processing of complex production processes has been proposed. An algorithm for parametric correction of intelligent measuring instruments in monitoring systems has been developed. A model of a …

Modeling And Dynamic Correction Of The Thermal Radiation Fluxes Measuring System, Olexander Alekseevich Sytnik, Fatima Mirazizovna Sagatova

Chemical Technology, Control and Management

Temperature measurements are currently an integral part of modern production, in particular, energy, aviation, instrumentation, etc. Therefore, the need to improve the accuracy of measurement, control and regulation of temperature largely determines the technical and economic efficiency of production. The development of reliable methods for temperature control under various conditions and the creation of specific devices is one of the most important tasks of modern instrumentation. The article deals with the issues of solving the problems of modeling and correcting the dynamic characteristics of a system for measuring thermal radiation fluxes using the integral method of signal recovery. For computer …

Investigation Of Magnetic Circuits Of Differential Transformer Displacement Sensors, Sulton Fayzullaevich Amirov, Absaid Khurramovich Sulliev, Shukhrat Azamatovich Sharapov

Chemical Technology, Control and Management

The article examines the magnetic circuits of both existing and developed differential transformer displacement sensors for large linear displacements. These circuits are characterized by a specific distribution structure of magnetic resistance parameters in long ferromagnetic cores and the magnetic capacitance between them. It is shown that in the existing sensor, the distribution of working magnetic flux along the length of the ferromagnetic cores has a nonlinear nature, resulting in a nonlinear relationship between the output signal in the form of electromotive force and the input linear displacement of the sensor. It has been established that by selecting the law of …

Tank Level Controller Plc Lab, Siddhi Upadhyaya, Teghvir Grewal

Electrical Engineering

The California Polytechnic State University San Luis Obispo’s Electrical Engineering Department is currently developing lab experiments for the new EE435 (Industrial Power Control and Automation) class. In order to support these efforts, fourth year Cal Poly students are expected to develop laboratory experiments that will be conducted during this new class for the semester system. The lab experiment focused on in this project is called the Tank Level Controller. This experiment will introduce EE 435 students to Schneider Electric Programmable Logic Controller (PLC) hardware and software, which is prominent in the automation industry.
This experiment will require students to develop …

Choice Of Instruments For Verification And Calibration Of Gas Analyzers, Ortigali Khakimov, Paraxat Mayliyevna Matyakubova, Mirolim Muhammad O'G'Li Maxmudjonov

Chemical Technology, Control and Management

This article analyzes the process of metrological control of gas analyzers and metrological requirements for them. The current state of the standards used in the state metrological control of gas analyzers and the results of the analyzes were studied. The task of choosing the measuring instruments used in the verification process and optimizing the requirements for them is set. An experimental verification process was organized in three groups using several measuring devices, and the reliability of the verification results was assessed. With the use of modern measuring instruments, a graph of the output value was built during the experimental verification …

Modeling And Adjustment Of A Fuzzy Controller In A Bioreactor Control System, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article describes the modeling and configuration of a fuzzy controller for the control system of the bacterial oxidation of hard-to-enrich gold-bearing sulfide ores. The simulated logical fuzzy controller allows you to save the consumption of refrigerant water consumed in the process by 4,3%, using it to control the process of bacterial oxidation.

Mathematical Description And Algorithm For Solving The Model Of The Ionite Regeneration Process In The Ion Exchange Method Of Water Softening, Djalolitdin Paxritdinovich Mukhitdinov, Nilufar Abdusami Qizi Yunusova

Chemical Technology, Control and Management

Based on the modern representation of the water softening process by the ion exchange method, modeling was carried out, an algorithm was developed and the ionite regeneration process was calculated in a water softening plant with a fixed ionite layer. To solve the system of equations of the model, special, but simple enough for use in engineering calculations, techniques and methods have been developed and applied. The constructed model and its solution algorithm can be used to predict the process of ionite regeneration in an ion exchange apparatus. It can also be used to calculate the time of the ionite …

Synthesis Methods And Algorithms For Expanding The Dynamic Range Of The Adc, Jumaev Odil Abdujalilovich, Rashidov G'Olibjon Xayriddinovich

Chemical Technology, Control and Management

The modern development of new technologies, in particular, the intensive use of programmable logic integrated circuits in digital information processing tasks, allows for algorithmically and programmatically solving problems, opens up real opportunities to increase accuracy and ensure the required signal conversion speed, and also, it will be possible to take into account the effects of noise and their elimination over the entire time interval band. The article discusses the main methods of digital information processing, analyzes the ways and possibilities of expanding the dynamic range of analog-to-digital converters, as well as the synthesis of appropriate conversion devices, primarily digital filters.

Mathematical Description Of A Bleach Impregnation Reservoir, Bekobod Ibragimov

Chemical Technology, Control and Management

This article discusses the issues of constructing a mathematical model of the technological process of bleaching textile materials in an impregnating reservoir using the heat balance equation, on the basis of which a qualitative analysis of the dynamic properties of an object has been carried out in order to create highly efficient control systems with the use of energy-saving technologies. While constructing a mathematical model characterizing the established and non-established modes of the control object (impregnating reservoir) used changes in heat flow and mass velocity of the incoming tissue. An algorithm for constructing a mathematical model of the process of …

Methods And Algorithms For Monitoring And Prediction Of Various Fire Hazardous Situations, Mizaakbar Xakkulmirzayevich Hudayberdiyev, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

This article analyzes emergency situations arising from natural disasters (fires, explosions, earthquakes, floods, landslides, etc.) and man-made accidents. The event in which the values of fire risks in the area decrease uniformly and at the same time the amount of fire risks is minimal is considered optimal. Models, methods, and logistic regression algorithm have been used to predict fire hazard situations and identify potential fire safety measures.

Synergetic Synthesis Of Multivariate Nonlinear Dynamic Objects, Isamiddin Siddikov, Komil Usmanov

Chemical Technology, Control and Management

Based on the synergetic approach, the article solves the problem of analyzing a chemical reactor as a control object and formulates recommendations on the structural and topological synthesis of various control system options. The main feature of technological control objects, in which, as a result of hydromechanical, physical, chemical influences on the flows of the starting substances, their physical properties, state of aggregation and composition change, is their multidimensionality, nonlinearity, multiconnectedness, as well as parametric uncertainty of the mathematical model at the design stage. This type of facility includes a chemical reactor, thermal management, which in most cases is carried …

Remote Alignment Fixing Device With Vizir Marks In Base Lcd Indicator, Nodirbek Rustambekovich Yusupbekov, Zahidov Muratovich Nematjon

Chemical Technology, Control and Management

The article substantiates the needs to increase the level of automation of methods and geodetic support of geometric parameters during the construction of buildings and structures. In particular, the method of alignment measurements is considered. This is widely used in determining deviations from the straightness and alignment of the installation of elements in engineering building structures, including hydraulic structures, as well as in the control of process equipment installations, rolling mills, conveyor lines, crane tracks, when monitoring precipitation. and deformations of techno objects. One of the methods of alignment measurements with the use of a visual-optical device – aliniometer and …

Algorithms For Multi-Factory Polynomial Modeling Of Technological Processes, Farrukh Do'stmirzayevich Jo'rayev, Murodjon Ashurqulovich Ochilov

Chemical Technology, Control and Management

The article reveals the meaning and essence of the modeling method in the study of complex technological processes based on the problematic aspects of building multifactorial relationships and the principles for their elimination. In the case of non-linearity of multifactorial connections of a complex system, the expediency of approximating such functions by polynomials is substantiated. The authors' ideas about the increasing importance of interpolation methods in practice against the background of the possibility of simplification based on the use of modern mathematical hardware and software for integration into the process of modeling and optimizing technological processes due to the complexity …

Virtual Potassium Chloride Analyzer In The System Of Advanced Control Of Potash Fertilizer Production Processes, Umidjon Ruziev, Jahongir Sherboyevich Bekqulov

Chemical Technology, Control and Management

It is proposed to include virtual instrumental quality analyzers of potash fertilizers in the composition of the advanced (advanced) management system. The structure of the virtual analyzer is substantiated using mathematical models of the technological process of drying potassium chloride in its composition. Based on the results of fuzzy clustering, the parameters of the modes of the technological process of drying potassium chloride are determined.

Influence Of Magnetomechanical Properties Of Ferromagnetic Materials On The Sensitivity Of A Magnetoelastic Sensor, Sulton Amirov, Kamila Komilovna Jurayeva

Chemical Technology, Control and Management

The requirements of high operational reliability are most fully met by automated monitoring and control systems, the elements of which are magnetoelastic sensors. Such sensors, due to their metrological characteristics, have found application in electrified railway transport, in the metallurgical, metalworking, mining and other industries. The principle of operation of such sensors is based on the fact that in the process of influencing the magnetic core of the sensor by force, there is a change in the magnetic permeability of the material, a change in the magnetic resistance of the circuit, a change in the mutual inductance coefficient of the …

Structural Model Of The Technological Process Of Storage And Processing Of Oil Raw Materials, N.A Kabulov

Chemical Technology, Control and Management

The technological method of storing and processing oilseed raw materials is structurally modelled in the article. Additionally, it is suggested that the generalized structure be presented as a three-part scheme, consisting of a raw material department, a processing shop, and transportation networks. On the basis of a thorough examination of the characteristics of the constituent parts of the technological complex, a practical model for the problem of the general characteristics of the technological complex is proposed.

Algorithmic Methods For Developing The Structure Of A Thyristor Electric Drive For Mining Machines, N.R Yusupbekov, O.A. Jumaev, S.S. Turaev

Chemical Technology, Control and Management

The article discusses the creation of algorithmic structures and the development of digital control systems for electric drives of mine-lifting machines, provides some concepts for creating digital control systems using thyristor converters. The analysis of the static volt-ampere characteristics of the thyristor is given, some calculations of the circuits and circuits of the thyristor converter (TP) corresponding to the different modes of operation of the TP are given, and also, based on the synthesis of the dynamic properties and characteristics of the thyristor, an algorithmic structure of the model of the thyristor converter is proposed.

Analysis Of Vegetable Oil Refining Technology, Elyor Samadov

Chemical Technology, Control and Management

Innovative technologies for refining vegetable oils are presented, as well as the qualitative characteristics of raw vegetable oils obtained by extraction and mechanical methods. A general review of the chemical composition and impurities of vegetable oils resulting from the reaction between glycerol and fatty acids is carried out, and a brief review of the study to determine the effect of refining on biologically active components.

The analytical review is devoted to a comparative comparison of two types of refining - chemical and physical refining.

Synchronization Of The Training Of Specialists In The Automation Of Technological Processes In Accordance With The Dynamics Of The Taxonomy Of Learning Goals, Yusuf Shodievich Avazov, Kamola Abdullaeva

Chemical Technology, Control and Management

Changes in the characteristics of modern ones, reflecting them as the "digital generation", inevitably necessitate electronic interactive, mobile and mixed, machine learning, especially in the field of automation and control of technological processes and production. As a consequence of reflecting these realities, there have been parallel changes in the taxonomy of learning objectives - from the classical to the revised rethought and digital.

In order to study the problem of synchronizing the training of future specialists in the field of automation and control of technological processes and production and funny knowledge in accordance with the dynamics of the taxonomy of …

Modeling Of The Process Of Measuring Conversion Of The Flow Of Liquid And Gaseous Media By The Method Of Variable Pressure Drop, Shukhrat Manapovich Gulyamov, Elbek Elmirza O'G'Li Ortiqov

Chemical Technology, Control and Management

On the basis of material and heat balances, taking into account the initial and boundary conditions, a mathematical model of the process of measuring the transformation of liquid and gaseous technological media by the method of variable pressure drop is constructed. The analysis of the results of studying the influence of non-stationary flows of a controlled medium on the uncertainty of the results of measuring the flow rate of liquids and gaseous mixtures with a changing hydrodynamic structure of the flow of a controlled medium is performed. A comparative analysis of the calculated and experimental transient processes in the measuring …

Model For Calculating The Static Characteristics Of Hydraulic Systems Of Hydro Technical Buildings, Mirkhalil Ismailov, Dong Zhang, Farkhod Kasimov

Chemical Technology, Control and Management

Hydraulic mechanisms that actuate flat gates, widely used in hydraulic structures, are studied as hydraulic actuators of the system. Their static mathematical models are developed using an integrated methodology with a hydraulic pump, inlet and suction pipes, and internal and external resistance factors. Unlike existing mathematical models, the model developed in this paper allows a detailed description of the characteristics of hydraulic drives due to the fact that pressure losses in the throttle, regulator, and power amplifier, as well as local resistances in hydraulic pipelines, are taken into account.

Research Of Three-Phases Current’S Transducers Of Filter-Compensation Devices For Control Reactive Power’S Consumption Of Asynchronous Motor, Ilkhomjon Khakimovich Siddikov, Dilyorbek Karimjonov Doniyorbek O'G'Li -, Abdumutal Abdikarimovich Abdigapirov

Chemical Technology, Control and Management

In the article given materials of developing of three-phase electromagnetic current transducers of reactive power, using with asynchronous motor, methods connecting of two sensing element, series, parallel and differential and loops suitable for each phase, dynamic characteristics of output signals of three-phase electromagnetic current transducers asynchronous motor.

On the basis of modern calculation and design complexes are of great importance in the research variable sizes of three-phase current electromagnetic transducers of filter-compensation devices of reactive power of asynchronous motors. Presented mathematical model of research of electrical, electromagnetic and magnetic elements of electromagnetic current transducers in the …