Controls and Control Theory Commons^™

Highly Efficient Maximum Power Point Tracking Using A Quasi-Double-Boost Dc/Dc Converter For Photovoltaic Systems, Christopher J. Lohmeier

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Solar photovoltaic (PV) panels are a great source of renewable energy generation. The biggest problem with solar systems is relatively low efficiency and high cost. This work hopes to alleviate this problem by using novel power electronic converter and control designs. An electronic DC/DC converter, called “Quasi-Double-Boost DC/DC Converter,” is designed for a Solar PV system. A Maximum Power Point Tracking (MTTP) algorithm is implemented through this converter. This algorithm allows the PV system to work at its highest efficiency. Different current sensing and sensorless technologies used with the converter for the MPPT algorithm are offered and tested. Design aspects …

Design And Control Of High Power Density Motor Drive, Dong Jiang

Doctoral Dissertations

This dissertation aims at developing techniques to achieve high power density in motor drives under the performance requirements for transportation system. Four main factors influencing the power density are the main objects of the dissertation: devices, passive components, pulse width modulation (PWM) methods and motor control methods.

Firstly, the application of SiC devices could improve the power density of the motor drive. This dissertation developed a method of characterizing the SiC device performance in phase-leg with loss estimation, and claimed that with SiC Schottky Barrier Diode the advantage of SiC JFET could benefit the motor drive especially at high temperature. …

Nonlinear Multivariable Modeling Of Solid Oxide Fuel Cells Using Core Vector Regression, M. Mohammadi, M. Raoofat, Hesamoddin Marzooghi, G. B. Gharehpetiangharehpetian

Hesamoddin Marzooghi

This paper presents new steady-state and dynamic models for solid oxide fuel cells (SOFCs) using core vector regression (CVR). So far, most of conventional SOFC models have been presented based on conversion laws. Due to complex mathematical equations used in these models, they are time-consuming and need large amount of memory to be applied for controller design, especially power electronic interface controller design, generation and load predictions, optimization and other studies. To overcome these problems, some black-box models, such as support vector machine (SVM) and artificial neural network (ANN)-based models have been also proposed for SOFC. In this paper, in …

Heart-Rate Monitoring Control System Using Photoplethysmography (Ppg), Wesley Nguyen, Ryan Horjus

Electrical Engineering

No abstract provided.

Modeling And Analysis Of The Effects Of Pcb Parasitics On Integrated Dc-Dc Converters, Darwin Domingo Fernandez

Master's Theses

Load transients are prevalent in every electronic device including semiconductor memory, card readers, microprocessors, disc drives, piezoelectric devices, and digitally based systems. They are capable of producing voltage stress, introducing noise, and degrading device functionality. In order to avoid damage to the device, a feedback control loop is implemented with system compensation to regulate the output voltage deviations by the converter. Because designing compensation networks can be rather complicated, DC-DC converters with integrated feedback control topologies help minimize design time and complexity of converter compensation at the expense of design flexibility. This thesis widens the limitations of an integrated DC-DC …

Bridgeless Active Power Factor Correction Using A Current Fed Push Pull Converter, Jeramie Seth Bianchi

Master's Theses

ABSTRACT

Bridgeless Active Power Factor Correction

Using a Current Fed Push Pull Converter

Jeramie Seth Bianchi

Switched Mode Power Supplies have become increasingly popular for efficient methods of delivering power to an assortment of electronic devices. This thesis proposes a method of using a current fed push pull converter to provide active power factor correction and rectification in a single stage. While most AC-DC converters utilize a bridge rectifier to convert AC-DC and then perform DC-DC conversion, the proposed circuit will utilize its output diodes to perform rectification, thus eliminating the need for a bridge rectifier. This circuit will also …

Experimental Study Of Shoot-Through Control Methods For Z-Source Inverter, Omar Ellabban, Joeri Van Mierlo, Philippe Lataire

Omar Ellabban

This paper presents a simulation and experimental comparative analysis of the Z-source inverter (ZSI) with four different shoot-through (ST) control methods, namely: the simple boost control, the maximum boost control, the maximum constant boost control and the modified space vector modulation boost control methods. A review of these methods is presented with a summary of all expressions. A prototype of a 30 kW ZSI is designed and implemented. The eZdsp™ F2808 evaluation board is used for the realization of the shoot-through control methods and the real time workshop (RTW) is used for automatic code generation. The paper compares between the …

Mechatronics Application To Solar Tracking, Danny L. Rodriguez Jr

Purdue Polytechnic Directed Projects

The purpose of this was to design and implement a two-axis solar tracking system utilizing the National Instruments C-Rio real time controller. In order to accomplish this a prototype was modeled in CAD. This prototype used two 12 V DC motors to change a solar panel's rotation and tilt based on feedback data from three cadmium sulfide photoresistors. This configuration was chosen for its ability to create both a left-right rotational and an up/down tilt differential. In Addition this approach uses National Instruments Labview to control a solar tracking system. Using Labview add uniqueness to this project by adding a …

Control Of A Bidirectional Z-Source Inverter Forelectric Vehicle Applications In Different Operation Modes, Omar Ellabban, Joeri Van Mierlo, Philippe Lataire

Omar Ellabban

This paper proposes two control strategies for the bidirectional Z-source inverters (BZSI) supplied by batteries for electric vehicle applications. The first control strategy utilizes the indirect field-oriented control (IFOC) method to control the induction motor speed. The proposed speed control strategy is able to control the motor speed from zero to the rated speed with the rated load torque in both motoring and regenerative braking modes. The IFOC is based on PWM voltage modulation with voltage decoupling compensation to insert the shoot-through state into the switching signals using the simple boost shoot-through control method. The parameters of the four PI …

A Dsp Based Dual Loop Digital Controller Design And Implementation Of A High Power Boost Converter For Hybrid Electric Vehicles Applications, Omar Ellabban, Joeri Van Mierlo, Philippe Lataire

Omar Ellabban

This paper presents a DSP based direct digital control design and implementation for a high power boost converter. A single loop and dual loop voltage control are digitally implemented and compared. The real time workshop (RTW) is used for automatic real-time code generation. Experimental results of a 20 kW boost converter based on the TMS320F2808 DSP during reference voltage changes, input voltage changes, and load disturbances are presented. The results show that the dual loop control achieves better steady state and transient performance than the single loop control. In addition, the experimental results validate the effectiveness of using the RTW …

Design And Implementation Of A Dsp Based Dual-Loop Capacitor Voltage Control Of The Z-Source Inverter, Omar Ellabban, Joeri Van Mierlo, Philippe Lataire

Omar Ellabban

The Z-source inverter is a recently proposed single stage converter topology with buck-boost capabilities. This paper proposes a dual-loop capacitor voltage control, with outer voltage loop and inner current loop, of the Z-source inverter (ZSI). Both controller are designed based on a third order small signal model of the ZSI using the direct digital design method. Real-time control algorithm is implemented using DSP linked with MATLAB real time workshop (RTW) as rapid prototyping tool. The feasibility of the proposed dual loop control method has been verified by the simulation and experimental results.

Intelligibility Of Electrolarynx Speech Using A Novel Hands-Free Actuator, Brian Madden, Mark Nolan, Ted Burke, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx provides quasi-periodic acoustic excitation of the vocal tract. In most electrolarynxes, mechanical vibrations are produced by a linear electromechanical actuator, the armature of which percusses against a metal or plastic plate at a frequency within the range of glottal excitation. In this paper, the intelligibility of speech produced using a novel hands-free actuator is compared to speech produced using a conventional electrolarynx. Two able-bodied speakers (one male, one female) performed a closed response test containing 28 monosyllabic words, once using a conventional electrolarynx and a second time using the novel design. The resulting audio recordings …

Augmented Control Of A Hands-Free Electrolarynx, Brian Madden, James Condron, Eugene Coyle

Conference Papers

During voiced speech, the larynx acts as the sound source, providing a quasi-periodic excitation of the vocal tract. Following a total laryngectomy, some people speak using an electrolarynx which employs an electromechanical actuator to perform the excitatory function of the absent larynx. Drawbacks of conventional electrolarynx designs include the monotonic sound emitted, the need for a free-hand to operate the device, and the difficulty experienced by many laryngectomees in adapting to its use. One improvement to the electrolarynx, which clinicians and users frequently suggest, is the provision of a convenient hands-free control facility. This would allow more natural use of …

Parallel Operation Of Inverters And Active Power Filters In Distributed Generation System: A Review, Shafiuzzaman Khan Khadem, Malabika Basu, Michael Conlon

Articles

In this paper a technical review of parallel operation of power electronics inverters for load sharing conditions in distributed generation (DG) network is presented. Emphasis is given to parallel operation of Active Power Filters (APFs) as they are widely used to mitigate load current disturbances into DG networks. Discussions on recent advances in control strategies as applied to APFs are presented.

Special Issue On Wireless Sensor And Actuator Networks, Jiming Chen, Karl H. Johanson, Stephan Olariu, Ioannis Ch. Paschalidis, Ivan Stojmenovic

Computer Science Faculty Publications

( First paragraph) WIRELESS Sensor Networks (WSNs), in their various shapes and forms, have greatly facilitated and enhanced the automated, remote, and intelligent monitoring of a large variety of physical systems. These networks consist of a large number of typically small devices, each incorporating sensing, processing, and wireless communications capabilities. Their use has penetrated a plethora of application domains from industrial and building automation, to environmental, wildlife, and health monitoring.

Aether, Thomas Cameron, Kristine Colton, Daren Childers

Electrical Engineering

Aether is a RC-style autonomous air vehicle that utilizes GPS positioning along with a wireless communication system to achieve a computer-controlled flight.

This report will incorporate the acquisition, design, integration, implementation and testing phases of the UAV development. Furthermore a discussion of troubleshooting as well as improvements for future projects will be included.