Computational Engineering Commons^™

A 4-Node Shell Finite Element Based On Assumed Bending And Membrane Strains For Static Analysis Of Plates And Shells, Sifeddine Abderrahmani

Emirates Journal for Engineering Research

In this paper the development of a new rectangular flat shell element is proposed. This element is called SBRPK-SBRIE. This element is used in the numerical analysis of thin structures based on the strain approach with linear elastic behavior. Combining bending and membrane elements yields the proposed element.The strain-based rectangular finite element for the thin plate bending element denoted SBRPK, and the strain-based membrane element denoted SBRIE. Several numerical examples have been conducted to assess the accuracy and reliability of the developed element compared with the theoretical results and other finite elements. Obtained results show its good performance compared to …

Early-Age Strength And Failure Characteristics Of 3d Printable Polymer Concrete: Numerical Modelling And Experimental Testing, Mohammad Amin Dehghani Najvani

Civil Engineering ETDs

The time-dependent rheological and early-age strength parameters of Polymer concrete (PC) were investigated. PC flow decreased, and the static yield stress and thixotropy increased as the specimen aged, while the dynamic yield stress remained unchanged. The study found that the Herschel-Bulkley model can accurately describe the PC’s rheological behavior over time. The change in cohesion strength and internal friction angle over time was observed using uniaxial unconfined compression and direct shear tests of fresh PC. A time-dependent MohrCoulomb failure criterion was established. Temperature analysis was used to determine the gel time and explain the evolution of the time-dependent early-age strength …

Permeability Prediction For Expansive Soil Based On Physical Properties Using Artificial Neural Networks, Ferry Fatnanta, Imam Suprayogi, Nicola Rabb Ranata, Soewignjo Agus Nugroho, Agus Ika Putra

Makara Journal of Technology

Permeability is a soil parameter related to the construction industry to understand the processes of infiltration, runoff, and settlement. The risk of testing errors is inevitable in permeability investigations, especially in expansive soils. Trial and error in permeability testing becomes difficult due to soils with small pore sizes and large shrinkage expansion. Several studies related to soil physical properties that affect permeability have been conducted. However, the correlation results obtained still have poor accuracy. Artificial neural networks (ANN) are machine learning systems that can change their structure to solve problems that are included in the system. The use of ANNs …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

How Can Visual Programing Be Used To Aid The Development Of A Structural Scheme Design Process Utilising Geometric Data Within An Architectural Revit Model?, Ed Carthy, Kieran Lakhera O'Shea

Reports

The early-stage structural scheme design of a building is a complex task requiring the collection of multiple information categories such as geometry, loading and materials. The collection and review of this information is traditionally conducted in a 2D environment. This is inefficient, time-consuming, and tedious. This paper provides a review of how structural engineers’ understanding and implementation of BIM has evolved significantly in recent years, validated by extant literature in areas such as BIM automation, visual programming, and structural optimisation in the structural engineering sector. Structural engineers are growing more aware that BIM provides a vast repository of data to …

Energy Dissipation In A Sand Damper Under Cyclic Loading, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Various seismic and wind engineering designs and retrofit strategies have been in development to meet structures' proper and safe operation during earthquake and wind excitation. One such method is the addition of fluid and particle dampers, such as sand dampers, in an effort to reduce excessive and dangerous displacements of structures. The present study implements the discrete element method (DEM) to assess the performance of a pressurized sand damper (PSD) and characterize the dissipated energy under cyclic loading. The idea of a PSD is to exploit the increase in shearing resistance of sand under external pressure and the associated ability …

Computational Study Of Dense Gas Dispersion In Urban Areas, Rasna Sharmin

All Dissertations

A series of steady-state simulations have been conducted to investigate removal of dense gas from a simple square canyon formed between two square cross-section obstacles. Due to urbanization and industrialization, there always lies a high risk of exposure to harmful pollutants which can result from accidental release of toxic gasses. Those are often denser than the atmosphere. and can easily get trapped in between buildings in urban canopies. It is important to have full understanding of flushing mechanism of dense fluid inside urban canopies by steady turbulent flow because the exposure to these toxic dense gasses can be catastrophic. There …

Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov

Chemical Technology, Control and Management

The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …

Assessment Of Contract Terms And Conditions For Lump-Sum Contracts, Omar Othman

Theses and Dissertations

A Contract is a tool that defines the obligations of the contracting parties and assigns the risk between them. Contracts are usually drafted to meet the interests of the owner by addressing the legal issues and liabilities. Meanwhile, less emphasis is placed on clearly communicating the contract terms and ensuring that all contracting parties comprehend their risks and obligations. In a country like Egypt, which has faced drastic economic and political changes in the past few years, and yet is experiencing a boom in the construction sector, many developers tend to draft contracts that might be legally complicated or lacks …

Context-Aware Sensing And Fusion For Structural Health Monitoring And Night Time Traffic Surveillance, Xinxiang Zhang

Electrical Engineering Theses and Dissertations

Rapid developments in computer vision technologies have been transforming many traditional fields in engineering and science in the last few decades, especially in terms of diagnosing problems from visual images. Leveraging computer vision technologies to inspect, monitor, assess infrastructure conditions, and analyze traffic dynamics, has gained significant increase in both effectiveness and efficiency, compared to the cost of traditional instrumentation arrays to monitor, and manually inspect civil infrastructures and traffic conditions. Therefore, to construct the next-generation intelligent civil and transportation infrastructures, this dissertation develops a comprehensive computer-vision based sensing and fusion framework for structural health monitoring and intelligent transportation systems. …

Evaluation Of Parametric And Nonparametric Statistical Models In Wrong-Way Driving Crash Severity Prediction, Sajidur Rahman Nafis

FIU Electronic Theses and Dissertations

Wrong-way driving (WWD) crashes result in more fatalities per crash, involve more vehicles, and cause extended road closures compared to other types of crashes. Although crashes involving wrong-way drivers are relatively few, they often lead to fatalities and serious injuries. Researchers have been using parametric statistical models to identify factors that affect WWD crash severity. However, these parametric models are generally based on several assumptions, and the results could generate numerous errors and become questionable when these assumptions are violated. On the other hand, nonparametric methods such as data mining or machine learning techniques do not use a predetermined functional …

Evaluación Analítica De Parámetros No Considerados En La Formulación De Resistencia Nominal De Conectores Tipo Espigo, José David Ovalle Fernández, William Oswaldo Ramírez Patiño

Ingeniería Civil

Existe una gran variedad de sistemas estructurales, cada uno con características específicas para el soporte de cargas verticales y horizontales. Uno de ellos, el sistema compuesto, el cual es desarrollado buscando ventajas como: la optimización del uso de los materiales combinando ambos en una unidad estructural, el uso de mayores luces entre columnas; la posibilidad de reutilización de la estructura; reducción de los costos de construcción debido a la disminución de tiempos en obra; de tamaño de columnas y cimentación; además, del aumento de protección contra el fuego y corrosión.

Con la aplicación de tecnologías como la soldadura, fue posible …

Review Of Forecasting Univariate Time-Series Data With Application To Water-Energy Nexus Studies & Proposal Of Parallel Hybrid Sarima-Ann Model, Cory Sumner Yarrington

Graduate Theses, Dissertations, and Problem Reports

The necessary materials for most human activities are water and energy. Integrated analysis to accurately forecast water and energy consumption enables the implementation of efficient short and long-term resource management planning as well as expanding policy and research possibilities for the supportive infrastructure. However, the integral relationship between water and energy (water-energy nexus) poses a difficult problem for modeling. The accessibility and physical overlay of data sets related to water-energy nexus is another main issue for a reliable water-energy consumption forecast. The framework of urban metabolism (UM) uses several types of data to build a global view and highlight issues …

Impacts Of Using Tubular Sections In Open Web Steel Joists, Hollis (Cas) L. Caswell V

Honors Theses

Open web steel joists are lightweight structural trusses used in place of I-beams to support long-span floors and roofs of open space buildings. Their slender geometry makes them highly efficient in resisting flexure, but susceptible to out-of-plane buckling in a failure mode known as lateral-torsional buckling. This failure can be avoided by running lateral bracing between joists called bridging or potentially by using tubular sections to build up the joists rather than angle sections.

It is possible that a joist design using tubular cross-sections could require less bridging and prevent the need to use erection bridging for initial joist construction. …

Effects Of City Growth On Tall Building Cladding Fatigue, Hang You

Electronic Thesis and Dissertation Repository

As city develops there will be changes in the aerodynamic characteristics due to varying building surrounding and topology. For example, the city growth around a tall building can cause an increase in wind load due to venturi or wake effects or decrease due to sheltering effects depending on the type of surrounding. The densification of cities will also increase the turbulence level due to wake effects. In the present study, the implication of these changes on the aerodynamic forces on cladding connections is investigated. With increased fluctuations in the wind loads, the cladding connections will also experience stress fluctuations, which …

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi

Civil Engineering Theses

Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …

Expanding The Concept Of Comprehensive Area Ratio Parameter To The South-Central States Towards Simplifying The Structural Evaluation Of Flexible Pavements At The Network Level, Nitish R. Bastola

Civil Engineering Theses

The surface deflection bowl data collected through Non-Destructive Testing (NDT) has been widely utilized by various Department of Transportation (DOTs) in the South-Central States and other places. The primary purpose of using deflection-based NDTs in network-level assessment is to identify a weak pavement section that requires further analysis at the project level. The falling weight deflectometer (FWD) test is one of the common NDT based tests utilized by highway agencies in assessing the performance of the flexible pavement. However, a robust method to evaluate pavement sections utilizing FWD data from all the sensors are seldom developed. There is always a …

Classification, Localization, And Quantification Of Structural Damage In Concrete Structures Using Convolutional Neural Networks, Majdi Flah

Electronic Thesis and Dissertation Repository

Applications of Machine Learning (ML) algorithms in Structural Health Monitoring (SHM) have recently become of great interest owing to their superior ability to detect damage in engineering structures. ML algorithms used in this domain are classified into two major subfields: vibration-based and image-based SHM. Traditional condition survey techniques based on visual inspection have been the most widely used for monitoring concrete structures in service. Inspectors visually evaluate defects based on experience and engineering judgment. However, this process is subjective, time-consuming, and hampered by difficult access to numerous parts of complex structures. Accordingly, the present study proposes a nearly automated inspection …

Assessing The Prevalence Of Suspicious Activities In Asphalt Pavement Construction Using Algorithmic Logics And Machine Learning, Mostofa Najmus Sakib

Boise State University Theses and Dissertations

Quality Control (QC) and Quality Assurance (QA) is a planned systematic approach to secure the satisfactory performance of Hot mix asphalt (HMA) construction projects. Millions of dollars are invested by government and state highway agencies to construct large-scale HMA construction projects. QC/QA is statistical approach for checking the desired construction properties through independent testing. The practice of QC/QA has been encouraged by the Federal Highway Administration (FHWA) since the mid 60’s. However, the standard QC/QA practice is often criticized on how effective such statistical tests and how representative the reported material tests are. Material testing data alteration in the HMA …

Modelling The Addition Of Limestone In Cement Using Hydcem, Niall Holmes, Denis Kelliher, Mark Tyrer

Conference papers

Hydration models can aid in the prediction, understanding and description of hydration behaviour over time as the move towards more sustainable cements continues.

HYDCEM is a new model to predict the phase assemblage, degree of hydration and heat release over time for cements undergoing hydration for any w/c ratio and curing temperatures up to 450C. HYDCEM, written in MATLAB, complements more sophisticated thermodynamic models by predicting these properties over time using user-friendly inputs within one code. A number of functions and methods based on up to date cement hydration behaviour from the literature are hard-wired into the code along with …

Multi-Objective Bayesian Optimization Of Super Hydrophobic Coatings On Asphalt Concrete Surfaces, Ali Nahvi, Mohammad Kazem Sadoughi, Ali Arabzadeh, Alireza Sassani, Chao Hu, Halil Ceylan, Sunghwan Kim

Ali Nahvi

Conventional snow removal strategies add direct and indirect expenses to the economy through profit lost due to passenger delays costs, pavement durability issues, contaminating the water runoff, and so on. The use of superhydrophobic (super-water-repellent) coating methods is an alternative to conventional snow and ice removal practices for alleviating snow removal operations issues. As an integrated experimental and analytical study, this work focused on optimizing superhydrophobicity and skid resistance of hydrophobic coatings on asphalt concrete surfaces. A layer-by-layer (LBL) method was utilized for spray depositing polytetrafluoroethylene (PTFE) on an asphalt concrete at different spray times and variable dosages of PTFE. …

A Multiline Anchor Concept For Floating Offshore Wind Turbines, Casey Fontana

Doctoral Dissertations

Floating offshore wind turbines (FOWTs) hold great potential for the renewable energy industry, but capital costs remain high. In efforts to increase FOWT substructure efficiency and reduce costs, this thesis investigates a novel multiline anchor concept in which FOWTs share anchors instead of being moored separately. The goal of this thesis is to evaluate the force dynamics, design, and potential cost reduction of the system. Anchor forces are simulated using the NREL 5 MW reference turbine and OC4-DeepCwind semisubmersible platform, and multiline anchor force is computed as the vector sum of the contributing mooring line tensions. The use of a …

Toward Building Resilient, Sustainable, And Smart Infrastructure In The 21st Century, Aly Mousaad Aly

Faculty Publications

In recent years, as a result of significant climate change, stringent windstorms are becoming more frequent than before. Given the threat that windstorms bring to people and property, wind/structural engineering research is imperative to improve the resilience of existing and new infrastructure, for community safety and assets protection. The Windstorm Impact, Science and Engineering (WISE) research program at Louisiana State University (LSU) focuses on creating new knowledge applicable to the mitigation of existing and new infrastructure, to survive and perform optimally under natural hazards. To achieve our research goals, we address two imperious challenges: (i) characterization of realistic wind forces …

Prediction Of Flood Hydrograph In Small River Catchments Using System Modelling Approach, Ahmed Nasr, Zeinab Bedri, Loreta Ramanauske

Conference papers

Floods remain to be one of the natural catastrophic disasters with serious adverse social and economic implications on individuals and communities all around the world. In Ireland, frequency of flood events have increased dramatically during the last forty years and is expected to continue to rise primarily due to changes in rainfall and temperature patterns as a result of the global climate change. Small river catchments are usually vulnerable to different types of flooding particularly those associated with “monster” rainfall events, which are characterised by short durations and high intensities. Therefore accurate prediction of flood hydrographs resulting from these rainfall …

Investigating Scale Effects On Analytical Methods Of Predicting Peak Wind Loads On Buildings, Mohammadtaghi Moravej

FIU Electronic Theses and Dissertations

Large-scale testing of low-rise buildings or components of tall buildings is essential as it provides more representative information about the realistic wind effects than the typical small scale studies, but as the model size increases, relatively less large-scale turbulence in the upcoming flow can be generated. This results in a turbulence power spectrum lacking low-frequency turbulence content. This deficiency is known to have significant effects on the estimated peak wind loads.

To overcome these limitations, the method of Partial Turbulence Simulation (PTS) has been developed recently in the FIU Wall of Wind lab to analytically compensate for the effects of …

Modeling The Impacts Of Sea Level Rise On Storm Surge Inundation In Flood-Prone Urban Areas Of Hampton Roads, Virginia, Luca Castrucci, Navid Tahvildari

Civil & Environmental Engineering Faculty Publications

Hampton Roads is a populated area in the United States Mid-Atlantic region that is highly affected by sea level rise (SLR). The transportation infrastructure in the region is increasingly disrupted by storm surge and even minor flooding events. The purpose of this study is to improve our understanding of SLR impacts on storm surge flooding in the region. We develop a hydrodynamic model to study the vulnerability of several critical flood-prone neighborhoods to storm surge flooding under several SLR projections. The hydrodynamic model is validated for tide prediction, and its performance in storm surge simulation is validated with the water …

On The Ramberg-Osgood Stress-Strain Model And Large Deformations Of Cantilever Beams, Ronald J. Giardina Jr

University of New Orleans Theses and Dissertations

In this thesis the Ramberg-Osgood nonlinear model for describing the behavior of many different materials is investigated. A brief overview of the model as it is currently used in the literature is undertaken and several misunderstandings and possible pitfalls in its application is pointed out, especially as it pertains to more recent approaches to finding solutions involving the model. There is an investigation of the displacement of a cantilever beam under a combined loading consisting of a distributed load across the entire length of the beam and a point load at its end and new solutions to this problem are …

Numerical Modeling Of Tornado-Like Vortex And Its Interaction With Bluff- Bodies, Zoheb Nasir

Electronic Thesis and Dissertation Repository

The study the flow structure of tornado-like vortices and their impact over engineering structures is important due to the extent of tornado induced fatalities and damages observed each year in North America and around the world. In the present study, a numerical modeling approach inspired by the WindEEE Dome and the modified version of Ward’s Tornado Simulator has been developed. Using a full-scale numerical simulator, tornadoes of different intensities have been simulated for different swirl ratio values to study flow structures in comparison with previous studies. The effect of topographic features on the tornado-like vortex has been investigated for the …

Microstructural Analysis Of Thermoelastic Response, Nonlinear Creep, And Pervasive Cracking In Heterogeneous Materials, Alden C. Cook

Electronic Theses and Dissertations

This dissertation is concerned with the development of robust numerical solution procedures for the generalized micromechanical analysis of linear and nonlinear constitutive behavior in heterogeneous materials. Although the methods developed are applicable in many engineering, geological, and materials science fields, three main areas are explored in this work. First, a numerical methodology is presented for the thermomechanical analysis of heterogeneous materials with a special focus on real polycrystalline microstructures obtained using electron backscatter diffraction techniques. Asymptotic expansion homogenization and finite element analysis are employed for micromechanical analysis of polycrystalline materials. Effective thermoelastic properties of polycrystalline materials are determined and compared …

Numerical Modeling And Seismic Assessment Of Smart Isolation System For High-Speed Railway Rc Bridge Subjected To Near-Field Ground Motions, Lingkun Chen

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.