Structural Engineering Commons^™

Evaluations Of Frp Composite Coupons Under Impact And Puncture, Lekhnath Bhandari

Graduate Theses, Dissertations, and Problem Reports

Evaluations of FRP Composite Coupons Under Impact and Puncture

Lekhnath Bhandari

Railroad tank cars are the main mode of transportation for carrying flammable liquids and other hazardous materials, in any mode of ground transportation system. These tank cars, if punctured during derailments may explode releasing large amounts of hazardous materials and posing serious threats to human life and leading to economic losses. To minimize such catastrophes, in 2015, United States Department of Transportation (USDOT) proposed to improve the thermal and puncture performances of these tank cars and introduced two new design specifications: DOT-117 and DOT-117R. Tank cars with 9/16 inches …

Strengthening Of Damaged Structural Members With External Frp, Krishna Tulasi Gadde

Graduate Theses, Dissertations, and Problem Reports

Fiber reinforced polymer (FRP) composites are excellent alternatives to traditional materials for civil infrastructure. Several researchers have worked on the application of FRP composites for construction, repair, and rehabilitation of structures. This research aims at evaluating the use of carbon, glass, basalt, and hybrid FRPs with epoxy and polyurethane resin systems for rehabilitation of damaged structural components. Following evaluations were carried out in this research: (i) tension testing of FRP coupons, (ii) compression testing of concrete cylinders with and without damaged sections/FRP reinforcements, (iii) flexural testing of external-FRP reinforced RC beams with and without damages, (iv) pull-off tests on FRP …

Frp Pedestrian Bridges, Joseph Ryan Virga

Graduate Theses, Dissertations, and Problem Reports

Advanced fiber-reinforced polymer (FRP) composites are being used as mainstream structural materials to build complex infrastructure systems. Such application of FRP composites can be attributed to their high strength-to-weight and stiffness-to-weight ratios, corrosion resistance, higher energy absorption, durability, and competitive life-cycle costs. FRP composites are increasingly being considered as suitable alternative structural materials to traditional construction materials such as timber, concrete, and steel.

In this work, detailed experimental investigation has been carried out on different types of glass FRP composite pedestrian bridges with FRP and/or timber deck. Four full-scale FRP pedestrian bridges, including 70`×8.5’ and 70’×10’ single-span bridges, a 16’×8’ …

Expanding The Applicability Of Press-Brake-Formed Tub Girders Through The Extension Of The Maximum Span Length And The Evaluation Of Pier Continuity, Robert M. Tennant

Graduate Theses, Dissertations, and Problem Reports

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and buried soil steel structure industry leaders who provide educational information on the design and construction of short-span steel bridges in installations up to 140 feet in length. Within the SSSBA technical working group, a modular, shallow press-brake-formed tub girder (PBFTG) was developed to address the demand in the short-span steel bridge market for rapid infrastructure replacement solutions. PBFTGs consist of modular, shallow, trapezoidal boxes fabricated from cold-bent structural steel plate. A concrete deck, or other deck option, may be placed on the girder, and the modular unit …

Review Of Innovative Rehabilitation Techniques For Reinforced Concrete Buildings, Demetrius Karoubas

Graduate Theses, Dissertations, and Problem Reports

Building rehabilitation encompasses the act of repairing damaged structural elements, as well as the upgrading of older buildings to bring them up to modern standards. In recent years, due to the extreme economic and environmental cost of new construction, building rehabilitation is gaining ground as the most viable solution to the problem posed by damaged or substandard buildings. With the constant development of new materials with favorable properties and the improvement of our understanding of earthquakes, new rehabilitation techniques are being developed, improving on the efficiency and effectiveness of older ones. Reinforced Concrete (RC) buildings are a type of building …

Experimental And Design Evaluation Of Multi-Bolted Gfrp Joints, Amir Hossein Houshmandyar

Graduate Theses, Dissertations, and Problem Reports

For infrastructure system implementation, high strength/stiffness to self-weight ratio, corrosion resistance and ease of fabrication are just a few of the many advantages of pultruded fiber reinforced polymer (PFRP) composites over traditional construction materials. However, challenges of engineered FRP materials are addressed via continuous updating of design codes. For example, the anisotropic nature of FRP composite materials includes different mechanical properties in different directions (pull or longitudinal direction vs. transverse to pull direction) of a structural member, resulting in design complexities over isotropic materials. Typically, infrastructure systems are built by bolting FRP structural members because of certain advantages of bolted …

Finite Element Method Calculation Of A Prestressed Self Consolidating Concrete Beam, Vladyslav Machulsky

Graduate Theses, Dissertations, and Problem Reports

In this study, a prestressed concrete box beam produced for the Stalnaker Run Bridge (SRB) replacement project using self-consolidating concrete (SCC) was simulated using finite element method (FEM) numerical technique. ANSYS, a commercial FEM software, was used to build the prestressed SCC box beam model. The FEM model was developed to understand the behavior of concrete and steel under prestressing loads, long-term effects, and superimposed loads. The SOLID65 and REINF264 element types were chosen to simulate the behavior of concrete and steel materials. Experimentally measured mechanical properties of concrete from the SRB project were used in the analysis allowing for …

Estimation And Mitigation Of Stresses In Mass Concrete Structures Containing Ground Granulated Blast Furnaceslag And Fly Ash, Guadalupe Leon

Graduate Theses, Dissertations, and Problem Reports

In large concrete structures, due to concrete’s low thermal conductivity, the interior temperature rise can approach the concrete’s adiabatic temperature rise. As the concrete’s surface losses heat to the environment and cools rapidly, the interior of the concrete attempts to expand while the exterior provides an internal restraint. The phenomenon causes thermal stresses at the concrete’s surface. If the thermal stresses exceed the concrete’s tensile strength, there is a high probability of cracking. The cracks usually appear during the first few days after construction while the concrete’s tensile strength is low. These early-age cracks can reduce the service life of …

Timber Bridge Pile Splicing With Fiber Reinforced Polymer Wraps, Drew L. Damich

Graduate Theses, Dissertations, and Problem Reports

Timber pile repair using splicing is widely used but little research has been done to determine their strength capacity after repair using this method. Current timber pile splicing mechanisms utilize various steel or wooden components. Fiber Reinforced Polymer (FRP) wraps can be utilized as replacement to conventional materials in splicing of timber piles. This study evaluated the strength capacities of traditional splicing mechanisms in relation to FRP wrap splice mechanisms. Traditional splicing mechanisms consisted of flat steel plate, C-channel steel plate, and wooden plate splices. The FRP wrap splice consisted of unidirectional glass/epoxy composite with three layers of fabric as …

A Parametric Study Of Lateral-Torsional Buckling In Pultruded Frp Beams Using Abaqus, Robert Nathaniel Baylor

Graduate Theses, Dissertations, and Problem Reports

Fiber Reinforced Polymer (FRP) composites continue to gain popularity in civil and mechanical infrastructure due to a high strength-to-weight ratio, corrosion-resistance, and low maintenance requirements. FRP can also fulfill niche roles requiring non-conductivity and magnetic transparency. The longitudinal forming of pultruded FRP makes it a natural choice for lightweight beams. Although FRP composites have a high strength for their weight, the elastic and shear moduli for glass FRP may only be 1/7 and 1/30 that of steel, respectively. These low stiffnesses make FRP composite beams particularly susceptible to lateral-torsional buckling (LTB). In addition, the low shear to elastic stiffness amplifies …

Nondestructive Condition Assessment Of Civil Infrastructure Using Ultrasonic Technique, Tyler Keith Ashbrook

Graduate Theses, Dissertations, and Problem Reports

Civil Infrastructure controls the way people live by providing safe passage and shelter across the entire globe. Since safety leads the concern in infrastructure, it is essential to ensure that these structures have been adequately tested and analyzed periodically. Testing these structures can be extremely expensive when parts are required to be removed to capture the flaw, which is why nondestructive testing (NDT) continues to grow in demand since it can evaluate the structural component in-situ without causing any damage. Ultrasonic testing (UT) helps to adequately sustain and advance the safety in existing and future infrastructure across the globe. Continual …

Field Evaluation Of A Modular Press-Brake-Formed Steel Tub Girder In An Application That Includes Skew And Superelevation, Adam D. Roh

Graduate Theses, Dissertations, and Problem Reports

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and culvert industry leaders (including steel manufacturers, fabricators, service centers, coaters, researchers, and representatives of related associations and government organizations) who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140’-0” in length. A technical working group from within the SSSBA developed the notion for the modular shallow press-brake-formed steel tub girder as a solution for the short span steel bridge market.

After extensive testing at West Virginia University and multiple successful field demonstrations, members of …

On-Site Measurement Of The Water-Cementitious Ratio And Heat Of Hydration Of Delivered Concrete, Seyednavid Mardmomen

Graduate Theses, Dissertations, and Problem Reports

In this study, AASHTO T318-15 was adopted to estimate the water content of fresh concrete mixes and then revised to have better precision. The additional step required sieving out the coarse aggregate after drying the sample in a microwave oven, and it was then used in the calculation of the absorbed water and cementitious material content. Several laboratory batches, as well as on-site water-cementitious (w/cm) ratio tests, were performed on concrete mixes containing ordinary Portland cement, ground granulated blast furnace slag, and Class F fly ash. The results of the experiments indicated that the accuracy of the revised method was …

Effects Of Supplementary Cementitious Materials On Early-Age Tensile Creep And Shrinkage Of Concrete, Lucas James Bucklen

Graduate Theses, Dissertations, and Problem Reports

Determination of early-age tensile creep properties is critical for the performance of mass concrete structures at an early age. Due to the stress relaxation that tensile creep induces in concrete structures, accurate quantification of creep deformation is needed to determine the stress profile of the structure. Conventional methods of measuring tensile creep include the direct tension test where the concrete is subject to constant tensile stress. This method requires large quantities of concrete with embedded strain gauges which can only be used once. In this paper, the tensile creep parameters of concrete are found by using the restrained concrete ring …

Time-Dependent Reliability Framework For Durability Design Of Frp Composites, Rajneesh Kumar Bharil

Graduate Theses, Dissertations, and Problem Reports

The life-cycle performance, durability, and aging characteristics of Fiber Reinforced Polymer (FRP or Structural Composites) have been of keen interest to the engineers engaged in the FRP design, construction, and manufacturing. Unlike conventional construction materials such as steel and concrete, the design guidelines to account for the aging of FRP are somewhat scattered or not available in an approved or consistent format. Loss of strength over time or aging of any structural material should be of concern to engineers as the in-service lifespan of many engineering structures is expected to exceed 100 years. Use of durability strength-reduction factors or factors …

Monotonic Response Of Rc Exterior Beam-Column Joints Reinforced With Filler-Modules And Frp Composite Wraps/Gussets, Praveen Kumar Reddy Majjigapu

Graduate Theses, Dissertations, and Problem Reports

A review of post-earthquake reconnaissance studies revealed that reinforced concrete (RC) structures, designed and built before the development of Uniform Building Code (UBC) seismic design guidelines in 1976, have suffered complete collapse or severe damages due to the brittle failure of exterior beam-column joints. Over the past 50 years, several studies were conducted to strengthen exterior joints of in-service structures, with limited emphasis on developing simple, economic and durable repair strategies to improve energy absorption through large inelastic joint deformations. Even less emphasis was devoted to developing repair procedures that minimize stress-concentrations at joint corners and enhancing the strength, ductility, …

Experimental And Field Evaluation Of Frp Pedestrian Bridge Decks, Kalrav Singh Tomer

Graduate Theses, Dissertations, and Problem Reports

Traditional materials such as steel, timber, and concrete have continued to dominate their usage in civil infrastructure. They offer great advantages like strength and stiffness but at the same time they pose major issues in terms of durability and maintenance. Fiber reinforced polymer (FRP) exhibits outstanding properties like lightness, excellent corrosion and wear resistance along with superior thermo-mechanical properties. Glass FRPs (GFRPs) have emerged as one of the best alternatives in the field of civil infrastructure. It has been more than four decades since fiber reinforced polymer (FRP) composites have gained notable applications in civil infrastructure industry. However, FRPs have …

Retaining Wall System With Soldier Pile And Composite Resin Infused Lagging Elements, Shane Phillip Moore

Graduate Theses, Dissertations, and Problem Reports

Retaining walls are used as an alternative to installing drainage and soil reinforcement, depending on site conditions. This report discusses the design of a retaining wall with steel soldier piles and lagging elements for rocky slopes. The design consists of six different options, three options with a span of eight feet and three options with a span of ten feet between soldier piles. The three options for both spans are the same concept but designed for different load conditions. These options include: timber with glass fiber reinforced polymers (GFRP) wraps, reinforced concrete with GFRP wraps, and an FRP Prodeck system …

Bending Response Of Timber Mortise And Tenon Joints Reinforced With Filler-Modules And Frp Gussets, Andrew Robert Pacifico

Graduate Theses, Dissertations, and Problem Reports

In 2013, the California Bay Area (CBA) passed a set of ordinances to ensure that their 10,000 plus timber soft-story buildings were prepared for seismic events, through nondestructive evaluation methods. Many property owners are searching for an affordable retrofitting system that will also meet CBA’s new laws focusing on installations by the mandated deadlines in 2020. Over the past three to four decades, Fiber Reinforced Polymer (FRP) composites have found their way into the civil infrastructure sector for rehabilitation. The objective of this study is to evaluate the bending behavior retrofitted mortise and tenon timber joints reinforced with engineered wood …

Structural Behavior Of Steel Plate Embedded Hybrid Gfrp Shapes, Piyush R. Soti

Graduate Theses, Dissertations, and Problem Reports

The civil infrastructure industry has been dominated by traditional materials such as steel, timber, and concrete. Although these materials offer great advantages, they have major durability issues in terms of corrosion, decaying, and cracking. Traditional material-based structures deteriorate frequently and require regular-interval repairs with huge expenditures. To resolve these maintenance and durability issues associated with traditional materials, fiber reinforced polymer (FRP) composites have gained some popularity in the past few decades because of their superior mechanical properties and durability. Carbon-FRPs (CFRPs) and glass-FRP (GFRPs) are the most commonly used FRPs in the market. However, in civil engineering applications, CFRPs are …

Short Beam Shear Strength Evaluations Of Gfrp Composites: Correlations Through Accelerated And Natural Aging, William Todd Barker

Graduate Theses, Dissertations, and Problem Reports

Fiber Reinforced Polymers (FRP) composites have been materials of interest in replacing or reinforcing steel, wood, and concrete, but lack of understanding of degradation under physical and chemical aging is a main concern. Through many years of research, the understanding of aging or durability of GFRPs has improved. To be able to evaluate aging related degradation rates, an accelerated aging methodology under varying environments is introduced. Accelerated aging is a concept used to age composites in a lab controlled environment under varying pH conditions (2 to 13) and temperatures (~ -20° to +160°F). Once acceleratedly aged testing is completed, Arrhenius …

Field Performance And Rating Evaluation Of A Modular Press-Brake-Formed Steel Tub Girder With A Steel Sandwich Plate Deck, Nicole Marie Hegele Underwood

Graduate Theses, Dissertations, and Problem Reports

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and culvert industry leaders (including steel manufacturers, fabricators, service centers, coaters, researchers, and representatives of related associations and government organizations) who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140 feet in length. The SSSBA technical working group has developed a shallow press-brake-formed tub girder, a trapezoidal cold bent girder, to address the demand in the short span steel bridge market for rapid infrastructure replacement solutions.

Following extensive experimental testing and design work at West …

Direct Determination Of The Dynamic Elastic Modulus And Poisson's Ratio Of Timoshenko Prisms And Rods, Guadalupe Leon

Graduate Theses, Dissertations, and Problem Reports

In this study, the exact solution of the Timoshenko beam vibration frequency equation under free-free boundary conditions was determined with an accurate shear shape factor. The exact solution was compared with a 3-D finite element calculation using ABAQUS program, and the difference between the exact solution and the 3-D FEM was within 0.15% for both the transverse and torsional modes. Furthermore, relationships between the resonance frequencies and Poisson’s ratio were proposed that can directly determine the elastic constants, unlike the equations provided by ASTM C215. The frequency ratio between the 1^st bending mode and the 1^st torsional mode, …

The Determination Of The Concrete Tensile Creep At Early Age Using The Ring Test, Tadamon Mohammed

Graduate Theses, Dissertations, and Problem Reports

In this study, the modified double power law (MDPL) model is used to determine the tensile creep of concrete at an early age based on the ASTM C1581 restrained shrinkage ring test. Three concrete mixes using Ordinary Portland Cement (OPC) were tested. The three concrete mixes were cast, and each underwent the ring tests up to cracking. Mechanical properties of concrete at the age of 1, 3, 7, 14, and 28 days were tested to find the compressive strength, tensile strength and Young’s Modulus of concrete. The strength tests results were obtained from both 4x8 inch and 6x12 inch cylinders. …

Tire-Derived Geo-Cylinders And Polymer Products For Enhancing The Properties Of Base/Sub Base Materials In Pavement Systems, Justin Scott Smith

Graduate Theses, Dissertations, and Problem Reports

As a critical part of the transportation network, pavements offer a safe means for vehicular traffic. Pavements are subjected to many forms of stress during their service life, and they are susceptible to environment related cracking and failures. Failures can be attributed to poor subgrade, freeze-thaw variations, and fatigue under repetitive axle loadings. Reinforcement products such as tire-derived geo-cylinders (TDGC) which make-up mechanical concrete and geo-polymers have been utilized in civil engineering practice, and this research aims to understand the potential life of tested pavement system components set at displacement limitations when reinforced with TDGCs and geo-polymers from exposure to …