Open Access. Powered by Scholars. Published by Universities.®

Structural Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 7 of 7

Full-Text Articles in Structural Engineering

Behavior Of Concrete Mixes Using Recycled Aggregate Confined With Steel Sections, Latifa Sobhi Kassem, Adnan El-Masri, Nour Webhi Dec 2023

Behavior Of Concrete Mixes Using Recycled Aggregate Confined With Steel Sections, Latifa Sobhi Kassem, Adnan El-Masri, Nour Webhi

BAU Journal - Science and Technology

Recycled Concrete Aggregate (RAC) is a form of recycled concrete that has been studied for green building for the past 50 years. It can be used to create strong structures, such as seismic retrofitting of earthquake-prone structures. Studies have attempted to experimentally study the effect of using recycled aggregate in concrete, but the literature lacks the use of recycled concrete aggregate rapped with steel rings. This study examines the behavior of circular concrete columns with different percentages of recycled aggregate. It examines the behavior of a column with different percentages of recycled aggregate, one without jacketing, one with partial jacketing, …


Investigation Of The Experimental And Numerical Flexural Behavior Of Innovative Totally Encased Composite Beams, Nour Wehbi, Adnan Masri, Oussama Baalbaki Dec 2021

Investigation Of The Experimental And Numerical Flexural Behavior Of Innovative Totally Encased Composite Beams, Nour Wehbi, Adnan Masri, Oussama Baalbaki

BAU Journal - Science and Technology

Composite steel-concrete beams have been widely used in long span construction and high rise buildings due to their favorable behavior in terms of high strength, stiffness, and ductility. In this research, the flexural behavior of an innovative steel-concrete composite section is investigated experimentally and verified numerically using ABAQUS software. The studied section is composed of steel tubular specimen or steel hollow pipe totally encased in concrete in the absence of any flexural or shear reinforcement. Instead, steel mesh wraps are used around the tubular steel specimen to provide sufficient steel-concrete bond. All of the studied beams have the same 3m …


New Type Of Lightweight Aggregate For Use In Structural Concrete, Jamal Khatib, Ali Jahami, Oussama Baalbaki, Adel Elkordi Dec 2021

New Type Of Lightweight Aggregate For Use In Structural Concrete, Jamal Khatib, Ali Jahami, Oussama Baalbaki, Adel Elkordi

BAU Journal - Science and Technology

This research studied the utilization of municipal solid waste incineration bottom ash (MSWI-BA) in lightweight coarse aggregate (LWC) production. A special method was followed to prepare the new aggregate to fully replace the normal aggregates (NWA) in concrete. The mechanical properties such as compressive strength, tensile strength, and elasticity modulus were investigated for the LWC concrete. Then, two beams were prepared; one from LWC and the other from NWC. The structural performance of beams made up of lightweight aggregates compared to normal aggregates was investigated. The results showed that this type of aggregates led to a 20% reduction in concrete …


Properties Of Concrete Containing Crushed Limestone As Total Replacement Of Natural Sand And Recycled Engine Oil, Mohammad El Bast M. El Bast, Jamal Khatib, Oussama Baalbaki, Adel Elkordi Jun 2021

Properties Of Concrete Containing Crushed Limestone As Total Replacement Of Natural Sand And Recycled Engine Oil, Mohammad El Bast M. El Bast, Jamal Khatib, Oussama Baalbaki, Adel Elkordi

BAU Journal - Science and Technology

The rapid growth in the construction industry at the global level has made concrete the most widely used construction material throughout the world. Accordingly, the consumption of natural sand which is one the main raw material constituent of concrete is continuously growing. The demand for river sand is highly increasing due to its scarcity in the market. Manufactured sand produced by crushed rock is being considered as an appropriate alternative to replace river sand in concrete. In recent years, there is a growing interest in the use of crushed sand obtained from limestone quarries in some countries where river sand …


Dynamic Soil-Structure Interaction Analysis: Detecting The Reliability Of Modelling The Piles As A Plate Element For A Multistory Building Resting On Deep Foundation, Zeinab Hussein Zein Z.H.Zein, Lina Jaber L. Jaber, Yehya Temsah Y. Temsah Jun 2021

Dynamic Soil-Structure Interaction Analysis: Detecting The Reliability Of Modelling The Piles As A Plate Element For A Multistory Building Resting On Deep Foundation, Zeinab Hussein Zein Z.H.Zein, Lina Jaber L. Jaber, Yehya Temsah Y. Temsah

BAU Journal - Science and Technology

The assessment of seismic responses of buildings in dynamic-soil-pile-structure interaction problems has been one of the main interests among researchers in recent decades. Simulating such problems is usually done by two-dimensional models to overcome the difficulties encountered in 3D models. Commonly, piles were represented by plate elements of infinite length, disregarding the soil flowing between piles. Recently, Plaxis – a finite element software- implemented a new feature known as “the embedded pile row” that allows the definition of piles' out of plane spacing in a 2D model. Many researchers proved its validity in accurately simulating the real 3D pile’s behavior. …


A Novel Probabilistic Framework Of Rc Corroded Structures Under Dynamic Loading, Rawan Mouin Mashmoushy Eng., Wael Slika, Adel Elkordi Jun 2021

A Novel Probabilistic Framework Of Rc Corroded Structures Under Dynamic Loading, Rawan Mouin Mashmoushy Eng., Wael Slika, Adel Elkordi

BAU Journal - Science and Technology

Steel corrosion in reinforced concrete structures can lead to severe deterioration damage under static and seismic loads. In practice, it is essential to mitigate failure risk by quantifying the extent of damage and simulating the structural response of damaged structures. However, numerical modeling of the dynamic behavior of corroded structure is challenging due to high nonlinearity of the problem and its multidisciplinary nature. In addition, corrosion damage exhibits various sources of uncertainty that impede accurate deterministic modeling of the dynamic response of RC structures. Therefore, this study presents a simplified framework, to simulate the non-linear response of corroded structures under …


Use Of Biomimicry Design Approach In Constructing Sustainable Resilient Structures (Case Study: Port Of Beirut), Farouk Bader, Marwan Halabi, Hiba Mohsen, Maged Youssef May 2021

Use Of Biomimicry Design Approach In Constructing Sustainable Resilient Structures (Case Study: Port Of Beirut), Farouk Bader, Marwan Halabi, Hiba Mohsen, Maged Youssef

BAU Journal - Creative Sustainable Development

Resiliency is not the same as sustainability, nor its substitute, but definitely the two concepts complement each other’s. Sustainability is the avoidance of depletion of natural resources to maintain ecological balance whereas resiliency is to recover, adapt and keep going in the face of setbacks. While designing with green approach is important but what will happen to leed points if the building becomes uninhabitable due to disasters, that’s where resiliency comes into play. The 2019 statistics showed that natural disasters accounted for 133 billion dollars losses and manmade ones accounted for other 7 billion in addition to 11,755 people worldwide …