Other Civil and Environmental Engineering Commons^™

Effect Of Waste Covid-19 Masks On Compaction Characteristics Of Silty-Clay Soil, Sydney K. Lawson

Honors College Theses

The present study aims to explore the effect of adding shredded waste Covid-19 masks to silty-clay soil on the soil’s compaction characteristics for beneficial use in embankment, the subgrade of roadways, or backfill. This was accomplished by using two different types of masks: blue surgical masks and KN95 masks. Both mask types were hand shredded into half-inch sections using safety-scissors. The maximum dry density (MDD) and optimum moisture content (OMC) are the two most important compaction characteristics, and they were determined by the Standard Proctor Compaction Test (ASTM D698 / AASHTO T99). The change of both the MDD and OMC …

Investigation And Modification Of Single-Post Aluminum Sign Supports For Mash Crashworthiness, Rodrigo Quintero

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Traffic signs are used to display information to drivers and are one of the most commonly encountered roadside structures. Although they are a vital traffic control device, signs can pose a significant safety risk to errant drivers due to their extensive placement and proximity to the roadway. Therefore, traffic signs and their supports must be designed with crashworthiness in mind to reduce the likelihood of injury in the event of a vehicle impact. Prior to 2009, these systems were evaluated using the crash testing criteria found in the National Cooperative Highway Research Program (NCHRP) Report No. 350 [1]. Currently, they …

Analysis Of Evolution And Morphology Of Urban And Road Networks: Case Study Lebanon-Nabatiyeh Area, Amal Al Ghorayeb, Adel Elkordi, Ghaleb Faour, Zeinab Jaber, Youssef Attallah

BAU Journal - Science and Technology

This study examines the morphology and evolution of urban and road networks and their relationship with topography in the Lebanon-Nabatiyeh area, by using GIS and remote sensing data. and calculate the annual urban growth percentage rate. The results reveal a clear relationship between the morphology of urban and road networks and their evolution over four periods, as well as the influence of the surrounding topography on their configuration. The study recommends that urban areas should be developed in areas with a slope range of 15º or more to improve the urban structure and infrastructure surrounding them. Understanding the evolution and …

Columbus, Nebraska: Southern Housing Development Design Proposal, Ryan Weyers, Caiden Dynek, Alex Papa, Brexton Robertson, Kaden Perala

Honors Theses

The following paper proposes the design and creation of a new housing development in the city of Columbus, Nebraska in a lot to the south of the city and directly north of the Columbus wastewater treatment plant. The goal of this proposal is to provide readers with confidence that our company is the most qualified to complete the project and will create the safest, most comfortable, most efficient, and most cost-effective final design. This proposal seeks to offer a solution to the lack of affordable housing for the growing workforce in Columbus. In order to arrive at this solution, each …

Safety And Operational Assessment Of Rural Free Right-Turn Ramp Intersections, Jonathon Camenzind

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Free right-turn (FRT) ramps are alternative right-turn lane designs for intersecting highways. As of 2023, 79 FRT ramps exist at 68 rural highway intersections in Nebraska. FRT ramps may be located on three-legged or four-legged intersections and may be on the minor, the major, or both minor and major approaches of the same intersection.

This research compared the 68 rural FRT intersections to 24 similar non-FRT rural intersections to identify differences in crash frequency and crash rate and tested for statistical significance using a two-sample t-test. Crash data were obtained for the ten- year period of 2010-2019, with a focus …

Historic Downtown Streetscape Plan Price City, Utah, Patricia Beckert

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The idea of a small-town Main Street has profound meaning within the American culture that has prevailed for the past two centuries. Historically, Main Street serves as the beating heart of a community, a place where economic, social, cultural, and civic activities are centered (Francaviglia, 1996; Main Street America, n.d.). Since the beginning of the 19th century, many factors have led to the decline of Main Streets, and despite a variety of efforts from different stakeholders, that decline has only intensified in recent decades (Isenberg, 2008; Orvell, 2014 Howard, 2015). In 1980, after a three-year project conducted by the National …

Evaluation Of The Effect Of Mls Density Level Data On Dem, Essam Ghanem, Mostafa Rabah, Fekry Ashraf

Mansoura Engineering Journal

Mobile laser scanning (MLS) systems are quickly establishing themselves as the primary source of high-quality digital elevation models (DEM). Data density is the key element that determine the quality of DEMs. Moreover, point density acts a vital role in MLS operation planning and MLS project's cost. This study's goal was to evaluate the impact of point density from MLS on creating DEMs and the accuracy of computed volume in different interpolation methods. The finding demonstrated that the DEM's quality and the volume are more impacted by density level and interpolation method. Interpolation methods are affected by point density. There is …

Environmental Assessments On A Local Project, Robert Winebrinner, Trevor Wieseke, Summer R. Elmore, Alison Krupski, Mike Maurovich

Purdue Road School

This presentation will go through the environmental process of a recent $125M local project within Noblesville. What are the major differences between the National Environmental Policy Act (NEPA) and State Environmental Policy Act (SEPA) process as it relates to an environmental assessment (EA)? What is required, what is not required, and what is optional? How long does the process take? Join us as we walk through this exciting process and experience.

Additive Manufacturing Of Engineered Cementitious Composites With Ultra-High Tensile Ductility, Amir Bakhshi

Civil Engineering ETDs

One of the critical factors in the development of additive manufacturing in the construction industry is designing suitable materials for 3D printing applications. 3D concrete printing (3DCP) has gained significant attention due to the abundance and availability of concrete. However, concrete is a brittle material and, without proper reinforcement, cannot meet the requirements for structural purposes. Engineered Cementitious Composites (ECC), known for high ductility, and strain-hardening with low fiber contents, can potentially eliminate the need for steel reinforcement in 3D printing without any need for manual placement of reinforcement. A set of systematic tests on ECC mix designs' fresh and …

Fundamental Investigation Of Interaction Between Moisture And Asphalt-Aggregate Systems, Rui Xiao

Doctoral Dissertations

Moisture-induced damage is one of the most common forms of flexible pavement distress which directly causes or exacerbates pavement failure. The intrusion of moisture into the asphalt pavements reduces the overall mechanical properties of the locking structures and gives rise to one or more of the visible forms of distress such as raveling, stripping, permanent deformation and fatigue cracking. This doctoral study is aimed at understanding the detrimental action of water on the asphalt-aggregate systems and the damage mechanism by multi-technique investigation. A thermodynamics framework was considered to characterize the properties of asphalt mix ingredients as well as the engineering …

University Of Tennessee Outdoor Cultural And Recreational Center, Meredith King

Chancellor’s Honors Program Projects

No abstract provided.

University Of Tennessee Outdoor Cultural And Recreational Center, Meredith King

Chancellor’s Honors Program Projects

No abstract provided.

Big Data Applications: Public Involvement Tools For Public Involvement, Amy L. Livingston, Houssam Ghandour

Purdue Road School

Using big data to better understand origin-destination and regional travel patterns is critical to project development. Tools such as passive geographically based data lead to improved definitions for traffic analysis zones (TAZs), which, in turn, help inform public involvement plans for a more targeted approach and improved equity. This presentation will highlight future planning applications in Indiana and other case examples where we have used big data to aid the plan development of public and stakeholder engagement.

Load And Pressure Distribution As A Function Of Dynamic Contact Stress At The Railroad Crosstie-Ballast Interface, Habib Abdil Unluoglu

Theses and Dissertations--Civil Engineering

Excessive crosstie wear and abrasion and ballast wear and fouling are two of the fundamental problems contributing to inadequate railroad track performance. This adversely affects the attainment and long-term maintenance of desired track geometric requirements. The magnitudes and distribution of the stresses at the crosstie-ballast (CT-B) interface must be known to determine the stress distribution on the ballast. However, the stresses at the top of the ballast often vary significantly. This study examines a new approach to predicting dynamic contact pressures at the interface of crosstie and ballast using the ‘square wave theory.’ A data set of in-track CT-B interfacial …

Truss Bridge Damage Localization And Severity Estimation Using Influence Lines, Hamoud Alshallaqi

Civil and Environmental Engineering Theses and Dissertations

The safety of bridges is one of the primary concerns of researchers, engineers, and bridge owners and managers, especially when bridges are approaching the end of their intended service lives. The estimation of bridge condition and remaining service life is critical to prioritize the allocation of available funding for repairs and rehabilitation. Various methods, including both dynamic and static approaches, have been developed to detect and localize bridge damage and estimate its severity. This research presents a methodology for detecting a single damaged member in a truss bridge and estimating the severity of the damage using static vertical deflection influence …

Assessment Of Key Imperatives For Enhancing Precast Adoptability In Egypt, Mostafa Sameh

Theses and Dissertations

Precast Concrete’s modular application concept is a major construction method that has been used historically seen in various shapes, forms, and with a wide range of constituents. Examples include Ancient Egypt and China among several impressive structures in old civilizations. The major advantages of precast concrete lie in its adaptability, resilience, and versatility which makes precast concrete one of the most agile building materials. Precast concrete as we know it today has been introduced to our markets over the past several decades. Having similar advantages to that of old precast building methods, the road has been paved for wider use …

Experimental Investigation Of The Performance Of A Hybrid Self-Healing System In Porous Asphalt Under Fatigue Loadings, Shi Xu, Liu Xueyan, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, which is designed to achieve autonomic damage repair in asphalt pavement, offers a great life-extension prospect and therefore not only reduces pavement maintenance costs but also saves energy and reduces CO2 emissions. The combined asphalt self-healing system, incorporating both encapsulated rejuvenator and induction heating, can heal cracks with melted binder and aged binder rejuvenation, and the synergistic effect of the two technologies shows significant advantages in healing efficiency over the single self-healing method. This study explores the fatigue life extension prospect of the combined healing system in porous asphalt. To this aim, porous asphalt (PA) test specimens with …

Going Green: A Comparative Analysis Of Green Urbanism In Paris And Shanghai, Jeanne Torp

Honors Theses

As climate change becomes more pressing with each day and as we scramble to slow down the challenges it poses, adapting the means of operation within our cities will become an invaluable tool for reducing humanity’s carbon footprint. This paper seeks to study the ways in which green infrastructure in global cities can be used to do just that—adapting to and mitigating the effects of challenges resulting from climate change. In order to provide a broad overview of the effectiveness of such green infrastructure systems across the globe, this research will focus on two cities that vary greatly in their …

Evaluation Of Permanent Concrete Barriers To Mash 2016, Samuel Elias Hovde

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The objective of this research project was to develop evaluation criteria for permanent concrete barriers to MASH 2016 TL-3 and TL-4 without crash testing and then to evaluate permanent concrete barrier standards provided by the sponsoring agencies of the Midwest Pooled Fund Program. A literature review was conducted to determine evaluation criteria for stability, shape, strength, and anchorage, and a database of permanent concrete barrier crash tests was compiled. A survey was conducted to collect barrier standards from the members of the Midwest Pooled Fund Program, and barriers were selected and evaluated according to the determined methodology. A total of …

The Role Of Rejuvenators In Embedded Damage Healing For Asphalt Pavement, Shi Xu, Xueyan Liu, Amir Tabakovic, P Lin, Y Zhang, S Nahar, B J. Lommerts, Erik Schlangen

Articles

Rejuvenator encapsulation technique showed great potential for extrinsic asphalt pavement damage healing. Once the capsules are embedded within asphalt pavement, the healing is activated on-demand via progressing microcrack. When the microcrack encounters the capsule, the fracture energy at the tip opens the capsule and releases the rejuvenator. Then the released rejuvenator wets the crack surfaces, diffuses into and softens the aged bitumen, allowing two broken edges to come in the contact, preventing further asphalt pavement deterioration. The quality and speed of the damage repair process strongly depend on the quality of rejuvenator, thus it is important to choose a proper …

Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi

Civil Engineering Theses

Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …

Expanding The Concept Of Comprehensive Area Ratio Parameter To The South-Central States Towards Simplifying The Structural Evaluation Of Flexible Pavements At The Network Level, Nitish R. Bastola

Civil Engineering Theses

The surface deflection bowl data collected through Non-Destructive Testing (NDT) has been widely utilized by various Department of Transportation (DOTs) in the South-Central States and other places. The primary purpose of using deflection-based NDTs in network-level assessment is to identify a weak pavement section that requires further analysis at the project level. The falling weight deflectometer (FWD) test is one of the common NDT based tests utilized by highway agencies in assessing the performance of the flexible pavement. However, a robust method to evaluate pavement sections utilizing FWD data from all the sensors are seldom developed. There is always a …

Bio-Binder—Innovative Asphalt Technology, Amir Tabakovic

Articles

The global road network spans 16.3 million km [1], of which 5 million km is in the EU. These road networks fulfil major economic and social goals by facilitating the movement of goods and people throughout the EU, and are therefore of the utmost importance to the economic and social life of the EU [2]. National governments invest heavily in their road networks, e.g., in 2014, EUR 53.33 billion was invested in the development and maintenance of the EU road network [3]. Each year, the world produces 1.6 trillion tonnes of asphalt [4], of which 218 million tonnes is produced …

An Approach To Counting Vehicles From Pre-Recorded Video Using Computer Algorithms, Mishuk Majumder

LSU Master's Theses

One of the fundamental sources of data for traffic analysis is vehicle counts, which can be conducted either by the traditional manual method or by automated means. Different agencies have guidelines for manual counting, but they are typically prepared for particular conditions. In the case of automated counting, different methods have been applied, but You Only Look Once (YOLO), a recently developed object detection model, presents new potential in automated vehicle counting. The first objective of this study was to formulate general guidelines for manual counting based on experience gained in the field. Another goal of this study was to …

Development Of An Improved Arterial Roadway Performance Reliability Methodology, Ernest Tufuor

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The need for reliable performance measures of urban arterial roadways is increasing because of the rise in traffic congestion and the high value of travel time. Consequently, travel time reliability (TTR), which combines components of measures of central tendency and measures of dispersion of travel times, has recently received considerable research interest.

The basis of all TTR metrics is the travel time distribution (TTD). Estimating and forecasting arterial TTDs for TTR analysis is the focus of this dissertation. This dissertation proposes a new TTR methodology that is a marked improvement on recent TTR estimation and forecasting methodologies including the current …

2-D Non-Linear Finite Element Analysis Of Folsom Dam: Seismically Induced Separation And Pore Pressure Along The Soil-Concrete Interface, Grace Amoussou

Master of Science in Civil Engineering Theses

The seismic soil-concrete interface stability of composite dams has been an area of interest to many researchers. However, the true interface behavior during a seismic event has not been well understood. During a ground shaking, bonding and de-bonding action along the interface may cause significant separation of soil and concrete surfaces, and such a separation may take place at any depth along the interface creating a stability concern for the overall dam. Moreover, the repetitive nature of bonding/debonding behavior may induce excess pore pressure along the interface, which in turn, may trigger a liquefaction failure or a hydraulic fracture in …

Uas Based Methodology For Measuring Glide Slope Angles Of Airport Precision Approach Path Indicators (Papi), Yi-Chun Lin, Seyyed Meghdad Hasheminasab, John L. Bullock, Deborah Horton, Adam Baxmayer, Ayman Habib, Darcy M. Bullock

Purdue Road School

This session presents alternative approaches for using unmanned aerial systems for checking the alignment of precision approach path indicators (PAPI lights). UAS data acquired at the KLAF (Purdue) airport will be used as an illustrative example.

A Novel Self-Healing System: Towards A Sustainable Porous Asphalt, Shi Xu, Xueyan Liu, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, aimed to produce a sustainable asphalt pavement using green technology, has been studied in the past two decades. Technologies including encapsulated rejuvenator and induction heating have been proposed, demonstrated in the laboratory, and gradually evaluated in field application. This paper looks into the synergy effect of the above two technologies, where induction heating serves as the asphalt damage repair mechanism, requiring just 2 min heating time and encapsulated rejuvenator will replenish (rejuvenate) aged asphalt binder and reinstate bitumen’s healing ability. Moreover, the increased temperature from induction heating could in turn accelerate the diffusion process of rejuvenator into aged …

Carbon-Based Interlayers In Perovskite Solar Cells, Aleksandr P. Litvin, Xiaoyu Zhang, Kevin Berwick, Anatoly V. Fedorov, Weitao Zheng, Alexander V. Baranov

Articles

Perovskites are solution-processed, high-performance semiconductors of interest in low-cost photovoltaics. The interfaces between the perovskite photoactive layers and the top and bottom contacts are crucial for efficient charge transport and minimizing trapping. Control of the collection of charge carriers at these interfaces is decisive to device performance. Here, we review recent progress in the realization of efficient perovskite solar cells using cheap, easily processed, stable, carbon-based interlayers. Interface materials including graphene, carbon nanotubes, fullerenes, graphene quantum dots and carbon dots are introduced and their influence on device performance is discussed.

Wastewater Treatment Fatty Acids For Biodiesel Production, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater scum is the thick oily substance that floats on top of the primary and secondary tanks within a wastewater treatment plant. Scum has a 30% to 60% lipid content making it an excellent resource for the biodiesel industry. Also the use of scum would reduce the cost of current management practices such as landfill disposal or incineration. In this article there is an overview of lipid byproducts currently being produced at wastewater treatment plants today. This is followed by a presentation showing a full length process for turning wastewater scum into biodiesel raw material.