Construction Engineering and Management Commons^™

Fabricación De Morteros Reforzados Para Recubrimiento Con Fibras Extraídas Del Pseudotallo De La Planta De Plátano (Musa Paradisiaca) Mezclados Con Cenizas De Procesos Agroindustriales, Laura Natalia Galeano Sarmiento

Ingeniería Civil

Debido a la alta demanda de materiales en la industria de la construcción, en este proyecto de investigación se planteó el uso de fibras vegetales como alternativa de materia prima para el reforzamiento de morteros. En este caso, se evaluó la viabilidad de añadir fibras extraídas del pseudotallo de la planta de plátano Musa Paradisiaca, y cenizas volantes. Se describieron diferentes aplicaciones de otros proyectos similares para el uso de reforzamientos con fibras vegetales en la construcción, además de referir el proceso de cultivo, extracción de la fibra y tratamiento.

Se fabricaron morteros fibroreforzados a los cuales se les realizaron …

Seismic Loading Effects Within Orthogonally Connected Steel Lateral Force Resisting Systems, Alhussin Faraj Aliwan

Graduate Theses and Dissertations

Steel buildings located within seismically active regions require special design considerations to ensure public safety and prevent collapse during an extreme seismic event. Two commonly used steel systems are special moment frames (SMFs) and buckling-restrained braced frames (BRBFs). When two seismic systems share a common column in an orthogonal configuration (such as at a building corner), design specifications currently consider a 100+30 rule wherein the shared column is designed for 100% fuse demand in one direction, plus 30% fuse demand from the other direction. While this rule has been shown to be reasonable for elastic building response, a few studies …

On The Seismic Performance Of Skewed Special Moment Frame Reduced Beam Section Connections, Damaso Daniel Dominguez

Graduate Theses and Dissertations

Special Moment Frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs, as they provide lateral system stiffness without the use of braces which often obstruct views and architectural features. Reduced beam section (RBS) connections are popular SMF connection details developed following the Northridge earthquake to limit brittle fractures within connection welds. Current American Institute of Steel Construction (ASIC) provisions (i.e. AISC 341-16) provide prequalified SMF RBS connection details (including welding requirements); however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF RBS connections …

Wireless Underground Communications In Sewer And Stormwater Overflow Monitoring: Radio Waves Through Soil And Asphalt Medium, Usman Raza, Abdul Salam

Faculty Publications

Storm drains and sanitary sewers are prone to backups and overflows due to extra amount wastewater entering the pipes. To prevent that, it is imperative to efficiently monitor the urban underground infrastructure. The combination of sensors system and wireless underground communication system can be used to realize urban underground IoT applications, e.g., storm water and wastewater overflow monitoring systems. The aim of this article is to establish a feasibility of the use of wireless underground communications techniques, and wave propagation through the subsurface soil and asphalt layers, in an underground pavement system for storm water and sewer overflow monitoring application. …

Characterization And Delineation Of Karst Geohazards Along Rm652 Using Electrical Resistivity Tomography, Culberson County, Texas, Adam F. Majzoub

Electronic Theses and Dissertations

The Delaware Basin of West Texas and southeastern New Mexico is the major western subdivision of the Permian Basin and a northern extension of the Chihuahuan Desert. The major evaporite unit within the Delaware Basin is the Castile Formation, which consists of gypsum/anhydrite and is highly susceptible to dissolution and karsting. Manifestations of karst within the Castile outcrop are abundant and include sinkholes, subsidence features and caves, both epigene and hypogene in origin.

Land reconnaissance surveys conducted during the summer of 2015 documented abundant karst landforms in close proximity to a major thoroughfare, RM 652, in Culberson County, Texas. 2D …

Building Codes To Minimize Cover Collapses In Sinkhole-Prone Areas, George Veni, Connie Campbell Brashear, Andrew Glasbrenner

Sinkhole Conference 2015

Cover- collapse sinkholes are forming with increasing frequency under buildings. Analyses of sinkhole distribution in Beacon Woods, Florida, preliminarily indicate their occurrence is an order of magnitude greater in urban versus undeveloped areas, suggesting the structures themselves are enhancing the collapse process. The most likely causes are induced recharge via at least one of two sources. First, runoff and drainage from roads, structures, and impoundments that is not adequately dispersed will promote sinkhole development. Second, leaking water, sewer, and septic systems beneath or adjacent to a structure will also promote collapse. The process of cover-collapse from induced recharge is well …

Multi Geophysical Parameters For Earthquake Forecasting, Ramesh P. Singh

Mathematics, Physics, and Computer Science Faculty Articles and Research

This article focuses on the importance of keeping the public aware of earthquake forecasting. This article also encourages proper seismic codes to design buildings in the seismic-prone regions because such practice can save lives and property associated with an earthquake.

Scientific And Engineering Studies Of Systems, Structures, And Components Important To Safety For A Potential Repository At Yucca Mountain, Nevada, Ian Buckle, E. Manos Maragakis

Publications (YM)

TASK 26: Upgrade of Earthquake Simulation Facilities in the Large-Scale Structures Laboratory at University of Nevada Reno

The objective of this Task was to purchase, install and commission the equipment necessary to upgrade two existing shake tables in the Structures Laboratory at UNR, from uniaxial to biaxial motion.

It was recognized that a parallel effort, funded by NSF and HUD, to add a third biaxial table with identical properties to the upgraded existing tables, would be undertaken at the same time.

Groundwater Study: Toyota Motor Manufacturing, Usa Georgetown, Kentucky, Gary Felton, Lyle V. A. Sendlein, Teri Dowdy, Daryl Hines

KWRRI Research Reports

An eighteen month study of the Toyota Motor Manufacturing (TMM) plant site and the surrounding area was undertaken. The basic charge for this project was to characterize the groundwater that is potentially impacted by the TMM plant site. This included occurrence, flow direction, and, if possible, velocity. Because the area is karstified (has sinkholes, springs, caves, etc.) surface water and groundwater are intimately connected and, hence, surface water was frequently an important component of this work.

Data from TMM construction plans and monitoring work done subsequent to construction were elicited from the various repositories within the TMM infrastructure. Aerial color …

Farm Dams In High Rainfall Areas, G C. Brown

Journal of the Department of Agriculture, Western Australia, Series 4

WATER storage is essential on most south-west farms to ensure adequate irrigation supplies in the dry summers. Government irrigation water supply schemes are limited and most farmers must supply their own water storage.

Land Levelling With Scrapers, K R. Southon

Journal of the Department of Agriculture, Western Australia, Series 4

A VARIETY of earth-moving equipment can be used in preparing land for flood irrigation, but the best machine for extensive earth moving over some distance is a power-driven, carry-all scraper.

Crossings For Channels And Drains In The Ord River Area, K S. Cole

Journal of the Department of Agriculture, Western Australia, Series 4

ON farms irrigated by surface methods it is essential to provide crossings over channels and drains.

These crossings must be wide and strong enough to take the biggest farm machinery.

Irrigation In Western Australia : Report On Government-Controlled Areas : 1958-59, H K. Gibsone

Journal of the Department of Agriculture, Western Australia, Series 4

IRRIGATION in the south-western portion of Western Australia is mainly confined to the coastal plain west of the Darling Range where the three main irrigation districts of Harvey, Collie and Waroona have been established by the State Government.

The Government-controlled irrigation areas extend southward from Waroona (70 miles from Perth) to Dardanup (120 miles from Perth) and have an average width of about five miles.

A Useful Farm-Made Roller, V E. Western

Journal of the Department of Agriculture, Western Australia, Series 4

A very serviceable compacting roller can be constructed at little expense by using discarded truck tyres.

The roller described here has an overall width of 5 ft. 3 in. and carries seven 9.00 x 24 semi-trailer tyres which had been discarded when the treads were worn smooth.