Civil and Environmental Engineering Commons^™

Evaluation Of Shared Space To Reduce Traffic Congestion, Kimley Frosch, David Martinelli, Avinash Unnikrishnan

Civil and Environmental Engineering Faculty Publications and Presentations

Pedestrian and vehicle interactions often lead to conflicts that bring about safety, traffic congestion, and priority or right of way issues. Common methods used in the past to combat said issues have largely relied on the principle of separating the motions of pedestrians and vehicles by means of bridges, tunnels, signals, and access restrictions. A different approach known as shared space aims to solve the same problems with a less structured and defined environment which instead places more reliance on human interaction and perception. Although it has been used in multiple scenarios across Europe with success, instances of shared spaces …

Observational Method And Coding Framework For Analyzing The Functionality Of Unprotected Bicycle Lanes, Cat Silva, Kelly Clifton, Rolf Moeckel

Civil and Environmental Engineering Faculty Publications and Presentations

This research evaluates how well unprotected bicycle lanes function as dedicated travel lanes for bicyclists. Two types of bicycle lanes are included in this study, including on-street bicycle lanes demarcated with painted lines on the vehicular roadway and bicycle lanes at-grade with, and immediately adjacent to, the pedestrian sidewalk. Specifically, the research is focused on how people behave and interact on street segments with these facilities in place. To assess how, and how well, these types of bicycle lanes function for the bicyclists using them, an observational method is deployed to record, document, and analyze people’s behavior and interactions. A …

Investigate An Appropriate Spatial Resolution For Large-Scaled Pedestrian Travel Demand Model, Qin Zhang, Kelly Clifton, Rolf Moeckel

Civil and Environmental Engineering Faculty Publications and Presentations

An appropriate spatial resolution plays a significant role in any travel demand models. It directly impacts the level of detail of model input data, outcomes, and sensitivities (Castiglione et al., 2014; Moeckel and Donnelly, 2015). Compared to motorized or bicycle travel, pedestrian trips occur over a shorter travel distance and they are sensitive to environmental conditions at a much finer grain. Thus, it is important for models to set an appropriate spatial resolution to capture variations in walking conditions, leading to better representation of pedestrian demand over space (Gehrke and Clifton, 2014).

The Tides They Are A-Changin’: A Comprehensive Review Of Past And Future Nonastronomical Changes In Tides, Their Driving Mechanisms And Future Implications, Ivan D. Haigh, Mark D. Pickering, J.A. Mattias Green, Brian K. Arbic, Arne Arns, Soenke Dangendorf, David Hill, David A. Jay, Multiple Additional Authors

Civil and Environmental Engineering Faculty Publications and Presentations

Scientists and engineers have observed for some time that tidal amplitudes at many locations are shifting considerably due to non-astronomical factors. Here we review comprehensively these important changes in tidal properties, many of which remain poorly understood. Over long geological time-scales, tectonic processes drive variations in basin size, depth, and shape, and hence the resonant properties of ocean basins. On shorter geological time-scales, changes in oceanic tidal properties are dominated by variations in water depth. A growing number of studies have identified widespread, sometimes regionally-coherent, positive and negative trends in tidal constituents and levels during the 19th, 20th and early …

Analysis Of Construction Fall Protection Guardrails In A Population With Changing Anthropometrics, Connor S. Klinzing

Masters Theses

The construction trade has commonly been cited as one of the most dangerous industries within the United States, with falls from elevation being the most predominate cause for injuries and deaths. The OSHA standards related guardrails has not changed since its implementation in 1970. These standards originally derive from the 1950s, which expect a 160-pound person with 40 pounds of equipment, tools, etc. However, the anthropometries of the common working age citizen has dramatically changed in respects to their weight. This study examines the relationship of the guardrail system to the changing anthropometries to determine if a reform is necessary …

Field Performance And Rating Evaluation Of A Modular Press-Brake-Formed Steel Tub Girder With A Steel Sandwich Plate Deck, Nicole Marie Hegele Underwood

Graduate Theses, Dissertations, and Problem Reports

The Short Span Steel Bridge Alliance (SSSBA) is a group of bridge and culvert industry leaders (including steel manufacturers, fabricators, service centers, coaters, researchers, and representatives of related associations and government organizations) who have joined together to provide educational information on the design and construction of short span steel bridges in installations up to 140 feet in length. The SSSBA technical working group has developed a shallow press-brake-formed tub girder, a trapezoidal cold bent girder, to address the demand in the short span steel bridge market for rapid infrastructure replacement solutions.

Following extensive experimental testing and design work at West …

Accuracy Of 3d Point-Cloud And Photo-Based Models Of City Street Intersections, Mariah D. Peart

Electronic Theses and Dissertations

From Georgia Southern University’s Built Environment and Modeling lab, this study compares point positions and distance measurements completed with state-of-the-art instruments and equipment. A modern, 12-second, laser scanner, a modern unmanned aerial vehicle and a highly accurate, 1-second robotic total station were employed for this study. The latter serving as the benchmark instrument. The main objective of this quantitative comparison is to explore the accuracy and usability of a relatively large point-cloud model, as a virtual surveying tool for redesign/reconstruction purposes. This project involves the generation of large, 3D, point-cloud models of two busy and complex city street intersections. One …

Finite Element Modeling Of Mechanically Stabilized Earth Walls Built With Welded Wire Wall Panels, Dejuan G. Solan

Electronic Theses and Dissertations

In this thesis, a finite element modeling of Mechanically Stabilized Earth (MSE) walls using welded wire wall panels was performed. The implementation of finite element modeling and analysis proved to be quite efficient in simulating the three-dimensional behavior of wall panels that are a part of MSE walls. The comprehensive finite element model included defined concrete and steel material properties in order to present both the realistic behaviors of each component in the model as well as better facilitating and increasing the accuracy of the simulation of numerous finite element analysis (FEA) cases. FEA was employed to simulate welded wire …

Fuzzy Control System For Variable Rate Irrigation Using Remote Sensing, Willians Ribeiro Mendes, Fábio Meneghetti U. Araújo, Ritaban Dutta, Derek M. Heeren

Biological Systems Engineering: Papers and Publications

Variable rate irrigation (VRI) is the capacity to spatially vary the depth of water application in a field to handle different types of soils, crops, and other conditions. Precise management zones must be developed to efficiently apply variable rate technologies. However, there is no universal method to determine management zones. Using speed control maps for the central pivot is one option. Thus, this study aims to develop an intelligent fuzzy inference system based on precision irrigation knowledge, i.e., a system that can create prescriptive maps to control the rotation speed of the central pivot. Satellite images are used in this …

Design Of Plant Protection Uav Variable Spray System Based On Neural Networks, Sheng Wen, Quanyong Zhang, Xuanchun Yin, Yubin Lan, Jiantao Zhang, Yufeng Ge

Biological Systems Engineering: Papers and Publications

Recently, unmanned aerial vehicles (UAVs) have rapidly emerged as a new technology in the fields of plant protection and pest control in China. Based on existing variable spray research, a plant protection UAV variable spray system integrating neural network based decision making is designed. Using the existing data on plant protection UAV operations, combined with artificial neural network (ANN) technology, an error back propagation (BP) neural network model between the factors affecting droplet deposition is trained. The factors affecting droplet deposition include ambient temperature, ambient humidity, wind speed, flight speed, flight altitude, propeller pitch, nozzles pitch and prescription value. Subsequently, …

Water Effects On Optical Canopy Sensing For Late-Season Site-Specific Nitrogen Management Of Maize, Tsz Him Lo, Daran Rudnick, Brian Krienke, D. M. Heeren, Yufeng Ge, Tim M. Shaver

Biological Systems Engineering: Papers and Publications

The interpretation of optical canopy sensor readings for determining optimal rates of late-season site-specific nitrogen application to corn (Zea mays L.) can be complicated by spatially variable water sufficiency, which can also affect canopy size and/or pigmentation. In 2017 and 2018, corn following corn and corn following soybeans were subjected to irrigation×nitrogen fertilizer treatments in west central Nebraska, USA, to induce variable water sufficiency and variable nitrogen sufficiency. The vegetation index-sensor combinations investigated were the normalized difference vegetation index (NDVI), the normalized difference red edge index (NDRE), and the reflectance ratio of near infrared minus red edge over near …

Principal Variable Selection To Explain Grain Yield Variation In Winter Wheat From Features Extracted From Uav Imagery, Jiating Li, Arun-Narenthiran Veeranampalayam-Sivakumar, Madhav Bhatta, Nicholas D. Garst, Hannah Stoll, P. Stephen Baenziger, Vikas Belamkar, Reka Howard, Yufeng Ge, Jiating Li

Biological Systems Engineering: Papers and Publications

Background: Automated phenotyping technologies are continually advancing the breeding process. However, collecting various secondary traits throughout the growing season and processing massive amounts of data still take great efforts and time. Selecting a minimum number of secondary traits that have the maximum predictive power has the potential to reduce phenotyping efforts. The objective of this study was to select principal features extracted from UAV imagery and critical growth stages that contributed the most in explaining winter wheat grain yield. Five dates of multispectral images and seven dates of RGB images were collected by a UAV system during the spring growing …

Agenator: An Open Source Computer-Controlled Dry Aging System For Beef, Soon Kiat Lau, Felipe Azevedo Ribeiro, Jeyamkondan Subbiah, Chris R. Calkins

Biological Systems Engineering: Papers and Publications

Dry aging of beef is a process where beef is exposed to a controlled environment with the ultimate goal of drying the beef to improve its quality and value. Comprehensive investigations into the effects of various environmental conditions on dry aging are crucial for understanding and optimizing the process, but the lack of affordable equipment focused on data collection makes it difficult to do so. The Agenator was thus developed as an open source system with a suite of features for investigating dry aging such as: measuring and recording relative humidity, temperature, mass, air velocity, and fan rotational speed; precise …

High-Speed, High-Frequency Ultrasound, In Utero Vector-Flow Imaging Of Mouse Embryos, Jeffrey A. Ketterling, Orlando Aristizabal, Billy Y. S. Yiu, Daniel H. Turnbull, Colin K. L. Phoon, Alfred C. H. Yu, Ronald H. Silverman

Biological Systems Engineering: Papers and Publications

Real-time imaging of the embryonic murine cardiovascular system is challenging due to the small size of the mouse embryo and rapid heart rate. High-frequency, linear-array ultrasound systems designed for small-animal imaging provide high-frame-rate and Doppler modes but are limited in regards to the field of view that can be imaged at fine-temporal and -spatial resolution. Here, a plane-wave imaging method was used to obtain high-speed image data from in utero mouse embryos and multi-angle, vector-flow algorithms were applied to the data to provide information on blood flow patterns in major organs. An 18-MHz linear array was used to acquire plane-wave …

A Machine Learning Approach For Improving Near-Real-Time Satellite-Based Rainfall Estimates By Integrating Soil Moisture, Ashish Kumar, Raaj Ramsankaran, Luca Brocca, Francisco Munoz-Arriola

Biological Systems Engineering: Papers and Publications

Near-real-time (NRT) satellite-based rainfall estimates (SREs) are a viable option for flood/drought monitoring. However, SREs have often been associated with complex and nonlinear errors. One way to enhance the quality of SREs is to use soil moisture information. Few studies have indicated that soil moisture information can be used to improve the quality of SREs. Nowadays, satellite-based soil moisture products are becoming available at desired spatial and temporal resolutions on an NRT basis. Hence, this study proposes an integrated approach to improve NRT SRE accuracy by combining it with NRT soil moisture through a nonlinear support vector machine-based regression (SVR) …

A Role For Nanoparticles In Treating Traumatic Brain Injury, Badrul Alam Bony, Forrest M. Kievit

Biological Systems Engineering: Papers and Publications

Traumatic brain injury (TBI) is one of the main causes of disability in children and young adults, as well as a significant concern for elderly individuals. Depending on the severity, TBI can have a long-term impact on the quality of life for survivors of all ages. The primary brain injury can result in severe disability or fatality, and secondary brain damage can increase the complexities in cellular, inflammatory, neurochemical, and metabolic changes in the brain, which can last decades post-injury. Thus, survival from a TBI is often accompanied by lifelong disabilities. Despite the significant morbidity, mortality, and economic loss, there …

Rapeseed Seedling Stand Counting And Seeding Performance Evaluation At Two Early Growth Stages Based On Unmanned Aerial Vehicle Imagery, Biquan Zhao, Jian Zhang, Chenghai Yang, Guangsheng Zhou, Youchun Ding, Yeyin Shi, Dongyan Zhang, Jing Xie, Qingxi Liao

Biological Systems Engineering: Papers and Publications

The development of unmanned aerial vehicles (UAVs) and image processing algorithms for field-based phenotyping offers a non-invasive and effective technology to obtain plant growth traits such as canopy cover and plant height in fields. Crop seedling stand count in early growth stages is important not only for determining plant emergence, but also for planning other related agronomic practices. The main objective of this research was to develop practical and rapid remote sensing methods for early growth stage stand counting to evaluate mechanically seeded rapeseed (Brassica napus L.) seedlings. Rapeseed was seeded in a field by three different seeding devices. A …

Early Prediction Of Soybean Traits Through Color And Texture Features Of Canopy Rgb Imagery, Wenan Yuan, Nuwan Kumara Wijewardane, Shawn Jenkins, Geng Bai, Yufeng Ge, George L. Graef

Biological Systems Engineering: Papers and Publications

Global crop production is facing the challenge of a high projected demand, while the yields of major crops are not increasing at sufficient speeds. Crop breeding is an important way to boost crop productivity, however its improvement rate is partially hindered by the long crop generation cycles. If end-season crop traits such as yield can be predicted through early-season phenotypic measurements, crop selection can potentially be made before a full crop generation cycle finishes. This study explored the possibility of predicting soybean end-season traits through the color and texture features of early-season canopy images. Six thousand three hundred and eighty-three …

Time-Domain And Frequency-Domain Reflectometry Type Soil Moisture Sensor Performance And Soil Temperature Effects In Fine- And Coarse-Textured Soils, Y. Zhu, S. Irmak, A. J. Jhala, M. C. Vuran, A. Diotto

Biological Systems Engineering: Papers and Publications

The performances of six time-domain reflectometry (TDR) and frequency-domain reflectometry (FDR) type soil moisture sensors were investigated for measuring volumetric soil-water content (θ_v) in two different soil types. Soil-specific calibration equations were developed for each sensor using calibrated neutron probe-measured θ_v. Sensors were also investigated for their performance response in measuring θ_v to changes in soil temperature. The performance of all sensors was significantly different (P<0.05) than the neutron probe-measured θ_v, with the same sensor also exhibiting variation between soils. In the silt loam soil, the 5TE sensor had the lowest root mean squared error (RMSE) of 0.041 …

Optimization Of Process Parameters And Fermentation Strategy For Xylanase Production In A Stirred Tank Reactor Using A Mutant Aspergillus Nidulans Strain, Asmaa Abdella, Fernando Segato, Mark R. Wilkins

Biological Systems Engineering: Papers and Publications

The present work studied the optimization of aeration rate, agitation rate and oxygen transfer and the use of various batch fermentation strategies for xylanase production from a recombinant Aspergillus nidulans strain in a 3 L stirred tank reactor. Maximum xylanase production of 1250 U/mL with productivity of 313 U/mL/day was obtained under an aeration rate of 2 vvm and an agitation rate of 400 rpm using batch fermentation. The optimum volumetric oxygen transfer coefficient (kLa) for efficient xylanase production was found to be 38.6 h1. Fed batch mode and repeated batch fermentation was also performed with kLa was 38.6 h1. …

Antibiotic Resistance Gene Profile Changes In Cropland Soil After Manure Application And Rainfall, Morgan Meyers, Lisa Durso, John E. Gilley, Heidi Waldrip, Lana Castleberry, Amy Millmier Schmidt

Biological Systems Engineering: Papers and Publications

Land application of manure introduces gastrointestinal microbes into the environment, including bacteria carrying antibiotic resistance genes (ARGs). Measuring soil ARGs is important for active stewardship efforts to minimize gene flow from agricultural production systems; however, the variety of sampling protocols and target genes makes it difficult to compare ARG results between studies. We used polymerase chain reaction (PCR) methods to characterize and/or quantify 27 ARG targets in soils from 20 replicate, long-term no-till plots, before and after swine manure application and simulated rainfall and runoff. All samples were negative for the 10 b-lactamase genes assayed. For tetracycline resistance, only source …

Perceptions Of Vulnerability To Flooding, Hurricanes, And Climate Change On Grand Isle, Louisiana’S Only Inhabited Barrier Island, Lauren Miller

Graduate Student Theses, Dissertations, & Professional Papers

This study used in-depth interviews of permanent residents on Grand Isle, Louisiana, a remote barrier island, to better understand their perceptions of structural flood measures, non-structural responses to flooding and hurricanes, and perceptions of vulnerability to flooding, hurricanes, and climate change on a remote barrier island-Grand Isle, Louisiana. Residents' perceptions regarding the various structural measures implemented by the federal, state, and local government appeared mixed. Non-structural responses to flooding risks implemented at the household, community, state, and federal level continue to strengthen resiliency on Grand Isle. According to interviewees, aspects of environmental, rural, and economic vulnerability on Grand Isle impact …

Intrinsic Variations In Geometric Properties Of Nonlinear Equivalent Strut Models For Infill-Rc Frames, Bruna Kirch Nienkotter Rocha

Theses: Doctorates and Masters

Reinforced concrete frames infilled with unreinforced masonry are commonly used in structures worldwide. The interaction between the frame and the infill panel is usually ignored in engineering practice, and the masonry infill is not considered as a structural element. However, observations made after the occurrence of strong earthquakes have shown that the bare frame and infill-frame behave differently when subjected to in-plane lateral loads. Extensive research has been conducted on the behaviour of infill-frames when laterally loaded. This research focuses on the analysis of infill-frames using the equivalent strut modelling method, whereby an infill-frame is simplified, and the infill panel …

Minimizing Trihalomethane Formation Through Source Water Monitoring And Optimizing Treatment Practices, Nashid Mirza

Graduate Theses, Dissertations, and Problem Reports

Trihalomethanes, a family of halogenated disinfection byproducts, are prevalent in finished drinking water. According to USEPA’s Disinfectants and Disinfection Byproducts Rules (DBPRs), the regulatory standard of the total trihalomethanes (TTHMs) is 80 μg/L, and water treatment plant operators are required to closely monitor TTHMs in the finished water on a quarterly basis. Although total organic carbon (TOC) has been identified as a precursor for the TTHMs, knowledge gaps still exist in how specific water and treatment related factors (e.g., intake water quality, seasonal variation, contact time, and treatment train) affect TTHMs formation. Focusing on water treatment plants in southwestern Pennsylvania, …

Review Of Water Allocation Models For West Virginia, Madison Lee Alexis Thompson

Graduate Theses, Dissertations, and Problem Reports

Modeling river basins started gaining in popularity and usage in the western part of the United States in large part due to its extreme droughts. Planning is necessary to sustain the population, industries, and recreational water use year-round. Water allocation modeling is a tool used to aid in the issues that come from managing water resources. This work considers the continuous models that synthesized the hydrologic processes that occur and provides a simulation of past, current, or future conditions.

West Virginia, located on the eastern side of the United States, does not have an extreme drought problem as seen in …

2019 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Bending Response Of Timber Mortise And Tenon Joints Reinforced With Filler-Modules And Frp Gussets, Andrew Robert Pacifico

Graduate Theses, Dissertations, and Problem Reports

In 2013, the California Bay Area (CBA) passed a set of ordinances to ensure that their 10,000 plus timber soft-story buildings were prepared for seismic events, through nondestructive evaluation methods. Many property owners are searching for an affordable retrofitting system that will also meet CBA’s new laws focusing on installations by the mandated deadlines in 2020. Over the past three to four decades, Fiber Reinforced Polymer (FRP) composites have found their way into the civil infrastructure sector for rehabilitation. The objective of this study is to evaluate the bending behavior retrofitted mortise and tenon timber joints reinforced with engineered wood …

Structural Behavior Of Steel Plate Embedded Hybrid Gfrp Shapes, Piyush R. Soti

Graduate Theses, Dissertations, and Problem Reports

The civil infrastructure industry has been dominated by traditional materials such as steel, timber, and concrete. Although these materials offer great advantages, they have major durability issues in terms of corrosion, decaying, and cracking. Traditional material-based structures deteriorate frequently and require regular-interval repairs with huge expenditures. To resolve these maintenance and durability issues associated with traditional materials, fiber reinforced polymer (FRP) composites have gained some popularity in the past few decades because of their superior mechanical properties and durability. Carbon-FRPs (CFRPs) and glass-FRP (GFRPs) are the most commonly used FRPs in the market. However, in civil engineering applications, CFRPs are …

Short Beam Shear Strength Evaluations Of Gfrp Composites: Correlations Through Accelerated And Natural Aging, William Todd Barker

Graduate Theses, Dissertations, and Problem Reports

Fiber Reinforced Polymers (FRP) composites have been materials of interest in replacing or reinforcing steel, wood, and concrete, but lack of understanding of degradation under physical and chemical aging is a main concern. Through many years of research, the understanding of aging or durability of GFRPs has improved. To be able to evaluate aging related degradation rates, an accelerated aging methodology under varying environments is introduced. Accelerated aging is a concept used to age composites in a lab controlled environment under varying pH conditions (2 to 13) and temperatures (~ -20° to +160°F). Once acceleratedly aged testing is completed, Arrhenius …

Retaining Wall System With Soldier Pile And Composite Resin Infused Lagging Elements, Shane Phillip Moore

Graduate Theses, Dissertations, and Problem Reports

Retaining walls are used as an alternative to installing drainage and soil reinforcement, depending on site conditions. This report discusses the design of a retaining wall with steel soldier piles and lagging elements for rocky slopes. The design consists of six different options, three options with a span of eight feet and three options with a span of ten feet between soldier piles. The three options for both spans are the same concept but designed for different load conditions. These options include: timber with glass fiber reinforced polymers (GFRP) wraps, reinforced concrete with GFRP wraps, and an FRP Prodeck system …