Biomedical Engineering and Bioengineering Commons^™

The Viability Of Advantg Deterministic Method For Synthetic Radiography Generation, Andrew Albert Bingham

Masters Theses

"Time sensitive and high resolution image simulations are needed for synthetic radiography generation. The standard stochastic approach requires lengthy run times with poor statistics at higher resolutions. The investigation of the viability of a deterministic approach to synthetic radiography image generation was explored. The aim was to analyze a computational time decrease over the stochastic method. ADVANTG was compared to MCNP in multiple scenarios including a Benchtop CT prototype, to simulate high resolution radiography images. By using ADVANTG deterministic code to simulate radiography images the computational time was found to decrease over 10 times compared to the MCNP stochastic approach"--Abstract, …

Combination Of Bmp-2 And Relaxin To Induce Osteogenesis In Vivo, Sahitya Injamuri

Masters Theses

"Bone grafts are a common procedure for treating craniofacial injuries such as trauma, surgery, and reconstruction. Autografts and allografts have limitations which encourages the use of synthetic bone grafts. While synthetic bone grafts, such as hydroxyapatite (HA) microspheres, are advantageous for their cost and reproducibility, they lack the cells and growth factors needed for proper osteoinduction. Bone morphogenetic protein-2 (BMP-2) has been shown to increase the osteoinduction of grafts but the effective dose is above physiological levels and causes undesired effects on the body. Relaxin has been shown to enhance BMP-2's ability to induce bone formation in vitro and thus …

An Economic Evaluation Of A Biofuel Supply Chain Utilizing Multiple Feedstocks, Huaqi Zhang

Masters Theses

Biomass is considered as one potential feedstock for biofuel production. However, the high cost of biomass-to-biofuel supply chain, attributed to biomass’s low bulk density and resulting harvest, storage, and transportation challenges, has been a major hindrance to the success of biomass-based biofuel industry. In addition, the issue of dry matter losses during storage for a feedstock has affected biomass quantity and quality if the feedstock is stored for several months after a single harvest in a year. One potential way to improve the economics of biomass supply chain is to reduce storage need and enhance the utilization of harvest equipment …

A Transcutaneous Data And Power Transfer System For Osteogenesis Monitoring Sensors, Deepak Dileepkumar

Masters Theses

Implant devices are widely used in health care applications such as life support systems, patient rehabilitation devices and patient monitoring devices. Medical implants have enabled physicians to obtain relevant real time information regarding an organ, or a site of interest with in the body and suggest treatment accordingly. In some cases, the position of the implant within the body or threats of infections prevents wired communication techniques to extract information from the implant. Wireless communication is the alternative in such cases. Distraction osteogenesis is one such application where wireless communication can be established with callus growth monitoring sensors to obtain …

Fluorochlorozirconate Glass Ceramics For Computed Radiography, Adam Wesley Evans

Masters Theses

Heat treating fluorochlorozirconate (FCZ) glasses nucleates nanocrystals in the glass matrix, resulting in a glass ceramic that has optical properties suitable for use as a medical imaging plate. As the temperature of heat treatment rises, the resulting FCZ glass-ceramic becomes increasingly more opaque as the size of the orthorhombic phase BaCl­₂[barium chloride] nanocrystals grow within the glass matrix. This opaqueness negatively affects imaging. The effect of adding Fe³⁺[iron] on the valence state of zirconium and overall glass quality was investigated.

Samples were synthesized and characterized with differential scanning calorimetry to determine the temperature of the orthorhombic …

A Feasibility Study Of Just-In-Time Asthma Self-Management Intervention, Phillip Charles Scruggs

Masters Theses

Quality asthma care requires not only an initial diagnosis, but long term follow up care and education on long term control. Preventable symptoms continue to reduce the quality of life for chronic asthma sufferers and place an unnecessary burden on emergency services and the health care system at large. A mobile health (mHealth) solution is proposed to effectively improve outcomes for patients while ultimately reducing the overall burden of mismanagement on the healthcare system as a whole. The Just-in-Time Asthma Self- Management and Intervention (JASMIN) system provides a way for a patient or user to track, self-manage, and interact with …

A Haptic Surface Robot Interface For Large-Format Touchscreen Displays, Mark Price

Masters Theses

This thesis presents the design for a novel haptic interface for large-format touchscreens. Techniques such as electrovibration, ultrasonic vibration, and external braked devices have been developed by other researchers to deliver haptic feedback to touchscreen users. However, these methods do not address the need for spatial constraints that only restrict user motion in the direction of the constraint. This technology gap contributes to the lack of haptic technology available for touchscreen-based upper-limb rehabilitation, despite the prevalent use of haptics in other forms of robotic rehabilitation. The goal of this thesis is to display kinesthetic haptic constraints to the touchscreen user …

Magnetism Of Magnetite Nanoparticles As Determined By Mössbauer Spectroscopy, Hien-Yoong Hah

Masters Theses

Fe₃O₄ [Magnetite] nanoparticles have magnetism that differs greatly from their bulk counterparts. Whereas bulk Fe₃O₄ is a ferrimagnet, single-domain Fe₃O₄ nanoparticles have been found to be superparamagnetic. This allows for increased magnetization of the nanoparticles compared to the bulk when in a magnetic field. For most paramagnets, magnetization requires applied fields of a few Tesla at low temperatures. This is achievable through the application of superconducting magnets. In superparamagnets, the high susceptibility of the particles allows magnetization through a Nd-Fe-B permanent magnet at room temperature. This is caused by an increased …

Registration And Segmentation Of Multimodality Images For Post Processing Of Skeleton In Preclinical Oncology Studies, Vineeth Radhakrishnan

Masters Theses

Advancements in medical imaging techniques provide biomedical researchers with quality anatomical and functional information inside preclinical subjects in the fields of cancer, osteopathic, cardiovascular, and neurodegenerative research. The throughput of the preclinical imaging studies is a critical factor which determines the pace of small animal medical research. The time involved in manual analysis of large amount of imaging data prior to data interpretation by the researcher, limits the number of studies in a time frame.

In the proposed solution, an automated image segmentation method was used to segment individual vertebrae in mice. Individual vertebrae of MOBY atlas were manually segmented …

Biodegradable Electronic And Optical Devices Toward Temporary Implants, Md Shihab Adnan

Masters Theses

"Implantable biomedical devices have a high potential to revolutionize health care technologies in near future. Implantable devices can be classified as permanent prosthetic devices such as pacemakers or nerve stimulants and temporary devices for intermediate monitoring and control scenario which are still in research phase. In contrast to permanent device, temporary implants lose functionality and become unnecessary after intended operational lifetime which may pose serious electromagnetic and biomedical safety concern, latent complications at the implanted sites and possible ethical issues if not removed from body by an additional surgical operation.

The first paper of this thesis focuses on exploring the …

Removal Of Trace Organic Compounds In Domestic Wastewater Using Recirculating Packed-Bed Media Filters, Brittani Nikole Perez

Masters Theses

Pharmaceuticals and personal care products (PPCPs) are commonly detected in the environment resulting from their survival from conventional wastewater treatment systems. More information is needed about the fate and transfer of these trace organic compounds in domestic wastewater and their associated risks so that efficient strategies for their removal can be developed for both large/small scale treatment systems. This study aimed to determine whether onsite wastewater treatment systems were capable of providing PPCP removal, in addition to quantifying different forms of removal (biodegradation/sorption). A column study was constructed to determine the removal efficiencies of 3 target PPCPs, endocrine disrupting compound …

Icloudecg: A Mobile Cardiac Telemedicine System, David S. Clifford

Masters Theses

With rising healthcare costs and a substantially growing number of patients 65 or over, the benefits of telemedicine and patient self-monitoring systems are becoming increasingly evident. Patients, physicians, hospitals, and even insurance providers benefit from vigilant, cost-effective patient monitoring systems. This thesis describes the development of a portable, smart-phone connected system for continuous cardiac monitoring. The system is capable of continuously monitoring the conditions of the heart, automated detection of cardiac arrhythmias, and real-time notifying patients and physicians of the detected abnormalities. The system consists of four main subsystems: 1) a Bluetooth capable chest-strap ECG, 2) an Android-enabled mobile device, …

Effects Of Varus Knee Alignment And Using Toe-Cages On Frontal Plane Knee Biomechanics In Stationary Cycling, Guangping Shen

Masters Theses

Effects of varus knee alignment on the internal knee abduction moment (KAM) in walking has been widely studied. KAM has been shown to be closely associated with the development of medial knee osteoarthritis (OA). Despite the importance of the knee alignment, no studies have explored its effects on knee frontal plane biomechanics during stationary cycling. The purpose of this study was to examine the effects of varus knee alignment and using a toe-cage on the knee frontal plane biomechanics during stationary cycling. Eleven participants in each of the varus and neutral groups participated in the study. The participants performed in …

Promoting Extracellular Matrix Crosslinking In Synthetic Hydrogels, Marcos M. Manganare

Masters Theses

The extracellular matrix (ECM) provides mechanical and biochemical support to tissues and cells. It is crucial for cell attachment, differentiation, and migration, as well as for ailment-associated processes such as angiogenesis, metastases and cancer development. An approach to study these phenomena is through emulation of the ECM by synthetic gels constructed of natural polymers, such as collagen and fibronectin, or simple but tunable materials such as poly(ethylene glycol) (PEG) crosslinked with short peptide sequences susceptible to digestion by metalloproteases and cell-binding domains. Our lab uses PEG gels to study cell behavior in three dimensions (3D). Although this system fosters cell …

Human Intracranial High Frequency Oscillation Detection Using Time Frequency Analysis And Its Relation To The Seizure Onset Zone, Riazul Islam

Masters Theses

One third of the patients diagnosed with focal epilepsy do not respond to antiepileptic drugs. For these patients the possible diagnosis options to give seizure freedom or at least reduce seizure frequencies significantly would be surgical resection or seizure interrupting implantable devices. The success of these procedures depends on accurate detection of the region causing seizure also known as epileptic zone. This requires detail pre-surgical evaluation including Invasive Video Electroencephalographic Monitoring (IVEM). The resulting great volume of intracranial Electroencephalography (iEEG) signal is visually examined by an expert epileptologist which can be time consuming, extremely complex, and not always effective. We …

Biodegradable Nano-Hybrid Polymer Composite Networks For Regulating Cellular Behavior, Charles Henley Sprague

Masters Theses

Photo-crosslinkable polymeric biomaterials have emerged in the field of biomedical research to promote tissue regeneration. For example, scaffolds that can be crosslinked and hardened in situ have been known to make suitable implant alternatives. Since injectable and photo-crosslinkable biomaterials offer the advantage of being minimally invasive, they have emerged to compete with autografts, a current highly invasive method to repair diseased tissue. A series of novel photo-crosslinkable, injectable, and biodegradable nano-hybrid polymers consisting of poly(ε-caprolactone fumarate) (PCLF) and polyhedral oligomeric silsesquioxane (POSS) has been synthesized in our laboratory via polycondensation. To engineer the material properties of the nano-hybrid networks, varied …

A Continous Rotary Actuation Mechanism For A Powered Hip Exoskeleton, Matthew C. Ryder

Masters Theses

This thesis presents a new mechanical design for an exoskeleton actuator to power the sagittal plane motion in the human hip. The device uses a DC motor to drive a Scotch yoke mechanism and series elasticity to take advantage of the cyclic nature of human gait and to reduce the maximum power and control requirements of the exoskeleton. The Scotch yoke actuator creates a position-dependent transmission that varies between 4:1 and infinity, with the peak transmission ratio aligned to the peak torque periods of the human gait cycle. Simulation results show that both the peak and average motor torque can …

Doping Of Fluorchlorozirconate And Borate-Silica Glass Ceramics For Medical Imaging And Fast Neutron Scintillation, Julie Elizabeth Swafford

Masters Theses

Borate silica glass ceramics were produced for neutron scintillation. The Glass ceramics were doped with europium fluoride [EuF₂] and cerium chloride [CeCl₃]. Isotopic lithium fluoride [⁶LiF] and boron oxide [¹⁰B₂O₃] were used in most samples while non-isotopic lithium fluoride [LiF] and boron oxide [ B₂O₃] were used in the rest. When exposed to a neutron beam, samples doped with europium fluoride [EuF₂] scintillated while samples doped with cerium chloride [CeCl₃] did not. This contradicts current literature on fast scintillation. What …

Computer Aided Diagnosis Of Oral Cancer: Using Time-Step Ct Images, Jonathan T. Scott

Masters Theses

"In medical imaging it is a very common practice to use a technique known as Time-Step imaging in patients who might develop cancer. Time-Step imaging it a very powerful technique, however it can lead to unmanageable amounts of image data. Previously the only way to search all of this data was to manually look through all of the files. This had to be done by trained professionals who knew what to look for within the images and make a judgment about the patient based on the images. This paper discusses the development of an algorithm to have a computer search …

Healing Of Bone Defects In A Rodent Calvarial Defect Model Using Strong Porous Bioactive Glass (13-93) Scaffolds, Yinan Lin

Masters Theses

"The main objective of this project was to evaluate the capacity of strong porous silicate (13-93) bioactive glass scaffolds prepared by a robocasting technique to regenerate bone and stimulate angiogenesis in a rat calvarial defect model. The scaffolds were created with the same grid-like microstructure but in a variety of formulations: (i) as-fabricated, (ii) pretreated in an aqueous phosphate solution to convert the glass surface to hydroxyapatite, (iii) loaded with bone morphogenetic protein-2 (BMP2) (1 µg per scaffold), and (iv) doped with copper (0.4-2.0 wt. % CuO). When compared to the as-fabricated scaffolds, the pretreated scaffolds enhanced bone regeneration at …

Freeform Extrusion Fabrication Of Titanium Fiber Reinforced 13-93 Bioactive Glass Scaffolds, Albin Thomas

Masters Theses

"Although implants made with bioactive glass have shown promising results for bone repair, their application in repairing load-bearing long bones is limited due to their poor mechanical properties as compared to human bones. This thesis study is on freeform extrusion fabrication of silicate based 13-93 bioactive glass scaffolds reinforced with titanium fibers. A composite paste was prepared with 13-93 bioactive glass filled with titanium fibers (~16 µm in diameter and aspect ratio of ~250) having 0.1 to 0.4 vol. % of the bioactive glass scaffold. This paste was then filled into a syringe manually, and then extruded through a nozzle …

Computer Aided Detection Of Oral Lesions On Ct Images, Shaikat Mahmood Galib

Masters Theses

"Oral lesions are important findings on computed tomography images. They are difficult to detect on CT images because of low contrast, arbitrary orientation of objects, complicated topology and lack of clear lines indicating lesions. In this thesis, a fully automatic method to detect oral lesions from dental CT images is proposed to identify (1) Closed boundary lesions and (2) Bone deformation lesions. Two algorithms were developed to recognize these two types of lesions, which cover most of the lesion types that can be found on CT images. The results were validated using a dataset of 52 patients. Using non training …

In Vitro Study Of Wound-Healing Capabilities Of Bioactive Glass Fibers Under Various Culture Conditions, Sisi Chen

Masters Theses

"Bioactive borate glass has been recognized to have both hard and soft tissue repair and regeneration capabilities through stimulating both osteogenesis and angiogenesis. However, the underlying physiological and cellular mechanism behind this function remains unclear. In this study, in vitro dynamic flow modules were designed to mimic the micro-environment near the vascular depletion and hyperplasia area in wound-healing regions, and were used to investigate the biocompatibility and functionality of borate glass nano-/micro-fibers. Glass-cell interactions were investigated either by dosing fibers to the upstream of or co-cultured with cells, and two types of borate glasses (with or without CuO/ZnO doped were …

Comparative Analysis Of Clavicular Tunnel Confìguration For Coracoclavicular Ligament Reconstruction, Mark Omwansa

Masters Theses

A number of coracoclavicular ligament reconstructions are carried out each year and post surgical fractures of the clavicle have been reported. The primary objective of this research is to develop a comparative metrics that compares clavicular tunnel configurations used in coracoclavicular reconstruction techniques. The goal of this comparison is to reduce post surgical failures due to clavicle fractures. The present analysis compared two techniques { a single 3 mm clavicular tunnel and the other double 6 mm tunnels { experimentally, using Four-point bending testing and Finite Element Analysis (FEA). A unique method, slicing, was used to create an FE clavicle …

A Low-Power Approach For Front End Biological Signal Conditioning, Logan Smith Taylor

Masters Theses

In a lab-on-a-chip (LOC) application, the measurement of small analog signals such as local temperature variation often involves detection of very low-level signals in a noisy micro-scale environment. This is true for other biomedical monitoring systems as well. These systems observe various physiological parameters or electrochemical reactions that need to be tracked electrically. For temperature measurement pyroelectric transducers represent an efficient solution in terms of speed, sensitivity, and scale of integration, especially when prompt and accurate temperature monitoring is desired.

The ability to perform laboratory operations on a small scale using miniaturized LOC devices is a promising biosensing technique. The …

Design Of A Passive Exoskeleton Spine, Haohan Zhang

Masters Theses

In this thesis, a passive exoskeleton spine was designed and evaluated by a series of biomechanics simulations. The design objectives were to reduce the human operator’s back muscle efforts and the intervertebral reaction torques during a full range sagittal plane spine flexion/extension. The biomechanics simulations were performed using the OpenSim modeling environment. To manipulate the simulations, a full body musculoskeletal model was created based on the OpenSim gait2354 and “lumbar spine” models. To support flexion and extension of the torso a “push-pull” strategy was proposed by applying external pushing and pulling forces on different locations on the torso. The external …

Were Neandertal Humeri Adapted For Spear Thrusting Or Throwing? A Finite Element Study, Michael Anthony Berthaume

Masters Theses

An ongoing debate concerning Neandertal ecology is whether or not they utilized long range weaponry. The anteroposteriorly expanded cross-section of Neandertal humeri have led some to argue they thrusted their weapons, while the rounder cross-section of Late Upper Paleolithic modern human humeri suggests they threw their weapons. We test the hypothesis that Neandertal humeri were built to resist strains engendered by thrusting rather than throwing using finite element models of one Neandertal, one Early Upper Paleolithic (EUP) human and three recent human humeri, representing a range of cross-sectional shapes and sizes. Electromyography and kinematic data and articulated skeletons were used …

Metabolic Modeling Of Secondary Metabolism In Plant Systems, Lisa M. Leone

Masters Theses

In the first part of this research, we constructed a Genome scale Metabolic Model (GEM) of Taxus cuspidata, a medicinal plant used to produce paclitaxel (Taxol®). The construction of the T. cuspidata GEM was predicated on recent acquisition of a transcriptome of T. cuspidata metabolism under methyl jasmonate (MJ) elicited conditions (when paclitaxel is produced) and unelicited conditions (when paclitaxel is not produced). Construction of the draft model, in which transcriptomic data from elicited and unelicited conditions were included, utilized tools including the ModelSEED developed by Argonne National Laboratory. Although a model was successfully created and gapfilled by ModelSEED …

Joint Reaction Force And Contributions Of Surrounding Muscles To Knee Joint Load During Stair Ascent In Total Knee Replacement Patients And Healthy Individuals, Robert Jacob Rasnick

Masters Theses

Total knee replacement (TKR) is commonly used to correct end stage knee osteoarthritis (OA) of the knee joint. Unfortunately, difficulty with stair climbing has been seen to exist, prolonging the challenges of TKR patents. Complete understanding of loading at the knee is of great interest in order to aid patient populations, implant manufacturers, rehabilitation, and future research. The outcome of a TKR is intended to reestablish normal motion and loading of the knee. Musculoskeletal modeling provides a means to accurately approximate joint loading and the corresponding muscle contributions during a movement.

The purpose of the present study was to examine …

Cervical Cancer Histology Image Feature Extraction And Classification, Peng Guo

Masters Theses

"Cervical cancer, the second most common cancer affecting women worldwide and the most common in developing countries can be cured if detected early and treated. Expert pathologists routinely visually examine histology slides for cervix tissue abnormality assessment. In previous research, an automated, localized, fusion-based approach was investigated for classifying squamous epithelium into Normal, CIN1, CIN2, and CIN3 grades of cervical intraepithelial neoplasia (CIN) based on image analysis of 62 digitized histology images obtained through the National Library of Medicine. In this research, CIN grade assessments from two pathologists are analyzed and are used to facilitate atypical cell concentration feature development …