Open Access. Powered by Scholars. Published by Universities.®
Aerodynamics and Fluid Mechanics Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Physical Sciences and Mathematics (16)
- Computer Sciences (11)
- Space Vehicles (5)
- Applied Mathematics (4)
- Heat Transfer, Combustion (4)
-
- Mechanical Engineering (4)
- Numerical Analysis and Computation (4)
- Chemical Engineering (3)
- Chemistry (3)
- Structures and Materials (3)
- Thermodynamics (3)
- Transport Phenomena (3)
- Aeronautical Vehicles (2)
- Fluid Dynamics (2)
- Materials Chemistry (2)
- Materials Science and Engineering (2)
- Physics (2)
- Physical Chemistry (1)
- Keyword
-
- Ablation (6)
- Ablative Materials (3)
- Pyrolysis gas (3)
- Backward Euler Method (2)
- Charring ablators (2)
-
- Computational Fluid Dynamics (2)
- Heat transfer (2)
- Hypersonic Flows (2)
- PICA (2)
- Rough Surface (2)
- Stardust (2)
- Thermal Protection System (2)
- Thermal Response (2)
- Turbulent Flow (2)
- Vibrational Energy (2)
- Aerothermodynamics (1)
- Applied Magnetic Field (1)
- Arc-jet environment (1)
- Astroparticles (1)
- Astrophysics (1)
- Band Model (1)
- Blowing Effects (1)
- Blowing Pattern (1)
- CFD (1)
- Capsule (1)
- Carbon Preform (1)
- Carbon fiber oxidation (1)
- Carbon fiber reactivity (1)
- Charring (1)
- Charring Ablator (1)
Articles 1 - 20 of 20
Full-Text Articles in Aerodynamics and Fluid Mechanics
Numerical Investigation On The Effect Of Spectral Radiative Heat Transfer Within An Ablative Material, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin
Numerical Investigation On The Effect Of Spectral Radiative Heat Transfer Within An Ablative Material, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin
Mechanical Engineering Faculty Publications
The spectral radiative heat flux could impact the material response. In order to evaluate it, a coupling scheme between KATS - MR and P1 approximation model of radiation transfer equation (RTE) is constructed and used. A Band model is developed that divides the spectral domain into small bands of unequal widths. Two verification studies are conducted: one by comparing the simulation computed by the Band model with pure conduction results and the other by comparing with similar models of RTE. The comparative results from the verification studies indicate that the Band model is computationally efficient and can be used to …
Fully Coupled Internal Radiative Heat Transfer For The 3d Material Response Of Heat Shield, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin
Fully Coupled Internal Radiative Heat Transfer For The 3d Material Response Of Heat Shield, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin
Mechanical Engineering Faculty Publications
The radiative transfer equation (RTE) is strongly coupled to the material response code KATS. A P-1 approximation model of RTE is used to account for radiation heat transfer within the material. First, the verification of the RTE model is performed by comparing the numerical and analytical solutions. Next, the coupling scheme is validated by comparing the temperature profiles of pure conduction and conduction coupled with radiative emission. The validation study is conducted on Marschall et al. cases (radiant heating, arc-jet heating, and space shuttle entry), 3D Block, 2D IsoQ sample, and Stardust Return Capsule. The validation results agree well for …
Numerical Reconstruction Of Spalled Particle Trajectories In An Arc-Jet Environment, Raghava S. C. Davuluri, Sean C. C. Bailey, Kaveh A. Tagavi, Alexandre Martin
Numerical Reconstruction Of Spalled Particle Trajectories In An Arc-Jet Environment, Raghava S. C. Davuluri, Sean C. C. Bailey, Kaveh A. Tagavi, Alexandre Martin
Mechanical Engineering Faculty Publications
To evaluate the effects of spallation on ablative material, it is necessary to evaluate the mass loss. To do so, a Lagrangian particle trajectory code is used to reconstruct trajectories that match the experimental data for all kinematic parameters. The results from spallation experiments conducted at the NASA HYMETS facility over a wedge sample were used. A data-driven adaptive methodology was used to adapts the ejection parameters until the numerical trajectory matches the experimental data. The preliminary reconstruction results show that the size of the particles seemed to be correlated with the location of the ejection event. The size of …
Effect Of Spalled Particles Thermal Degradation On A Hypersonic Flow Field Environment, Raghava S. C. Davuluri, Huaibao Zhang, Alexandre Martin
Effect Of Spalled Particles Thermal Degradation On A Hypersonic Flow Field Environment, Raghava S. C. Davuluri, Huaibao Zhang, Alexandre Martin
Mechanical Engineering Faculty Publications
Two-way coupling is performed between a spallation code and a hypersonic aerothermodynamics CFD solver to evaluate the effect of spalled particles on the flow field. Time accurate solutions are computed in argon and air flow fields. A single particle simulations and multiple particles simulations are performed and studied. The results show that the carbon vapor released by spalled particles tend to change the composition of the flow field, particularly the upstream region of the shock.
Numerical Investigation On Charring Ablator Geometric Effects: Study Of Stardust Sample Return Capsule Heat Shield, Haoyue Weng, Alexandre Martin
Numerical Investigation On Charring Ablator Geometric Effects: Study Of Stardust Sample Return Capsule Heat Shield, Haoyue Weng, Alexandre Martin
Mechanical Engineering Faculty Publications
Sample geometry is very influential in small charring ablative articles where 1D assumption might not be accurate. In heat shield design, 1D is often assumed since the nose radius is much larger than the thickness of charring. Whether the 1D assumption is valid for the heat shield is unknown. Therefore, the geometric effects of Stardust sample return capsule heat shield are numerically studied using a material response program. The developed computer program models material charring, conductive heat transfer, surface energy balance, pyrolysis gas transport and orthotropic material properties in 3D Cartesian coordinates. Simulation results show that the centerline temperatures predicted …
Numerical Investigation Of Pyrolysis Gas Blowing Pattern And Thermal Response Using Orthotropic Charring Ablative Material, Haoyue Weng, Alexandre Martin
Numerical Investigation Of Pyrolysis Gas Blowing Pattern And Thermal Response Using Orthotropic Charring Ablative Material, Haoyue Weng, Alexandre Martin
Mechanical Engineering Faculty Publications
An orthotropic material model is implemented in a three-dimensional material response code, and numerically studied for charring ablative material. Model comparison is performed using an iso-Q sample geometry. The comparison is presented using pyrolysis gas streamlines and time series of temperature at selected virtual thermocouples. Results show that orthotropic permeability affects both pyrolysis gas flow and thermal response, but orthotropic thermal conductivity essentially changes the thermal performance of the material. The effect of orthotropic properties may have practical use such that the material performance can be manipulated by altering the angle of orthotropic orientation.
Numerical Study Of Spallation Phenomenon In An Arc-Jet Environment, Raghava Davuluri, Alexandre Martin
Numerical Study Of Spallation Phenomenon In An Arc-Jet Environment, Raghava Davuluri, Alexandre Martin
Mechanical Engineering Faculty Publications
The spallation phenomenon might affect the aerodynamic heating rates of re-entry vehicles. To investigate spallation effects, a code is developed to compute the dynamics of spalled particles. The code uses a finite-rate chemistry model to study the chemical interactions of the particles with the flow field. The spallation code is one-way coupled to a CFD solver that models the hypersonic flow field around an ablative sample. Spalled particles behavior is numerically studied for argon and air flow field. The chemistry model is compared with that of Park's model which complies with oxidation and sublimation and shows disagreement for nitridation.
Experimental And Numerical Study Of Carbon Fiber Oxidation, Francesco Panerai, Nagi N. Mansour, Jean Lachaud, Alexandre Martin
Experimental And Numerical Study Of Carbon Fiber Oxidation, Francesco Panerai, Nagi N. Mansour, Jean Lachaud, Alexandre Martin
Mechanical Engineering Faculty Publications
The oxidation at high Knudsen number of FiberForm® , the matrix material of NASA's Phenolic Impregnated Carbon Ablator, is investigated both experimentally and numerically. The experimental setup consists of a quartz tube through a clamshell heater. Mass loss and recession of carbon preform samples are measured at temperatures between 700 and 1300 K and pressures around 2000 Pa. A volume average fiber-scale oxidation model is used to model the setup and extract the effective reactivity of the material. New values for carbon fiber reactivity are suggested and discussed.
Experimental Investigation Of Blowing Effects On Turbulent Flow Over A Rough Surface, Mark A. Miller, Alexandre Martin, Sean C. C. Bailey
Experimental Investigation Of Blowing Effects On Turbulent Flow Over A Rough Surface, Mark A. Miller, Alexandre Martin, Sean C. C. Bailey
Mechanical Engineering Faculty Publications
A high Reynolds number turbulent channel flow facility was used to study the combined effects of roughness and flow injection on the mean flow and turbulence characteristics. It was found that the additional momentum injection through the surface enhanced the roughness effects and for the mean flow the effect of blowing was indistinguishable from that of increased roughness. However, for the turbulence statistics, this analogy broke down in that the addition of blowing resulted in behavior which did not follow that predicted by Townsend’s hypothesis. This was observed as a reduction of outer-scaled Reynolds stress well into the outer layer. …
Coupled Flow Field Simulations Of Charring Ablators With Nonequilibrium Surface Chemistry, Hicham Alkandry, Iain D. Boyd, Alexandre Martin
Coupled Flow Field Simulations Of Charring Ablators With Nonequilibrium Surface Chemistry, Hicham Alkandry, Iain D. Boyd, Alexandre Martin
Mechanical Engineering Faculty Publications
This paper describes the coupling of a Navier-Stokes solver to a material response code to simulate nonequilibrium gas-surface interactions. The Navier-Stokes solver used in this study is LeMANS, which is a three-dimensional computational fluid dynamics code that can simulate hypersonic reacting flows including thermo-chemical nonequilibrium effects. The material response code employed in this study is MOPAR, which uses the one-dimensional control volume nite-element method to model heat conduction and pyrolysis gas behavior. This coupling is demonstrated using a test case based on the Stardust sample return capsule. Coupled simulations are performed at three different trajectory conditions. The effects of the …
Volume Averaged Modeling Of The Oxidation Of Porous Carbon Fiber Material, Alexandre Martin
Volume Averaged Modeling Of The Oxidation Of Porous Carbon Fiber Material, Alexandre Martin
Mechanical Engineering Faculty Publications
Charring ablators remain the premium choice for space exploration missions that involve atmospheric re-entry. This type of ablative material is composed of a carbon matrix, usually made of fibers, which is then impregnated with a resin. During re-entry, the high heat flux produced by convective heating causes the material to chemically react. First, the resin pyrolyzes, and is vaporized into a gas that travels through the material, and is eventually ejected at the surface. Then, as the temperature rises, the surface of the porous matrix recess through ablative processes. For re-entry conditions typical of space exploration missions, this is mainly …
Flow-Tube Oxidation Experiments On The Carbon Preform Of Pica, Francesco Panerai, Alexandre Martin, Nagi N. Mansour, Steven A. Sepka, Jean Lachaud
Flow-Tube Oxidation Experiments On The Carbon Preform Of Pica, Francesco Panerai, Alexandre Martin, Nagi N. Mansour, Steven A. Sepka, Jean Lachaud
Mechanical Engineering Faculty Publications
Oxidation experiments on the carbon preform of a phenolic-impregnated carbon ablator were performed in the NASA Ames ow-tube reactor facility, at temperatures between 700 and 1300 K, under dry air gas at pressures between 103 and 104 Pa. Mass loss, volumetric recession and density changes were measured at different test conditions. An analysis of the diffusion/reaction competition within the porous material, based on the Thiele number, allowed us to identify low temperature and low pressure conditions to be dominated by in-depth volume oxidation. Experiments above 1000 K were found at transition conditions, where diffusion and reaction occur at similar scales. …
Multi-Dimensional Modeling Pyrolysis Gas Flow Inside Charring Ablators, Haoyue Weng, Alexandre Martin
Multi-Dimensional Modeling Pyrolysis Gas Flow Inside Charring Ablators, Haoyue Weng, Alexandre Martin
Mechanical Engineering Faculty Publications
Using an ablative thermal/material response code, the importance of three-dimensionality for modeling ablative test-article is addressed. In particular, the simulation of the pyrolysis gas flow inside a porous material is presented, using two different geometries. The effects of allowing the gas to flow out of the side wall are especially highlighted. Results show that the flow inside the test-article is complex, and that the 0D or 1D assumption made in most Material Response (MR) codes might not be valid for certain geometries.
Comparison Of Models For Mixture Transport Properties For Numerical Simulations Of Ablative Heat-Shields, Hicham Alkandry, Iain D. Boyd, Alexandre Martin
Comparison Of Models For Mixture Transport Properties For Numerical Simulations Of Ablative Heat-Shields, Hicham Alkandry, Iain D. Boyd, Alexandre Martin
Mechanical Engineering Faculty Publications
The goal of this study is to evaluate the effects of different models for calculating the mixture transport properties on flowfield predictions of ablative heat-shields. The Stardust sample return capsule at four different trajectory conditions is used as a test case for this study. In the first part of the study, the results predicted using Wilke's mixing rule with species viscosities calculated using Blottner's curve fits and species thermal conductivities determined using Eucken's relation are compared to the results obtained using Gupta's mixing rule with collision cross-section (CCS) data. The Wilke/Blottner/Eucken model overpredicts the heat transfer to the surface relative …
Investigation Of Turbulent Structure Modification By Momentum Injection Into Turbulent Flow Over A Rough Surface, Mark A. Miller, Huaibao Zhang, Alexandre Martin, Sean C. C. Bailey
Investigation Of Turbulent Structure Modification By Momentum Injection Into Turbulent Flow Over A Rough Surface, Mark A. Miller, Huaibao Zhang, Alexandre Martin, Sean C. C. Bailey
Mechanical Engineering Faculty Publications
Utilizing a turbulent channel flow facility, experiments were performed to determine the modifications made to the temporal and spatial structure of turbulence over a sinusoidally rough surface due to momentum injection through the surface. As expected, when compared to the smooth-walled conditions, it was found that the surface roughness increased wall shear stress, decreased the turbulence energy content near the wall, and shifted that energy content to wavelengths on the order of the roughness elements. The addition of momentum injection was found to produce further modifications analogous to increasing the roughness height by increasing the wall shear stress and further …
Modeling Of Chemical Nonequilibrium Effects In A Charring Ablator, Alexandre Martin
Modeling Of Chemical Nonequilibrium Effects In A Charring Ablator, Alexandre Martin
Mechanical Engineering Faculty Publications
Charring ablators remain the premium choice for space exploration missions that involve atmospheric re-entry. These type of ablative material are composed of a carbon matrix, usually made of fibers, which is then impregnated with a resin. During re-entry, the high heat flux produced by convective heating causes the material to chemically react. First, the resin pyrolyzes, and is vaporized into a gas that travels through the material, and is eventually ejected at the surface. Since the composition of the gas at the surface greatly affects the heat flux, and therefore the surface temperature, it is thus important to be able …
High Performance Modeling Of Atmospheric Re-Entry Vehicles, Alexandre Martin, Leonardo C. Scalabrin, Iain D. Boyd
High Performance Modeling Of Atmospheric Re-Entry Vehicles, Alexandre Martin, Leonardo C. Scalabrin, Iain D. Boyd
Mechanical Engineering Faculty Publications
Re-entry vehicles designed for space exploration are usually equipped with thermal protection systems made of ablative material. In order to properly model and predict the aerothermal environment of the vehicle, it is imperative to account for the gases produced by ablation processes. In the case of charring ablators, where an inner resin is pyrolyzed at a relatively low temperature, the composition of the gas expelled into the boundary layer is complex and may lead to thermal chemical reactions that cannot be captured with simple flow chemistry models. In order to obtain better predictions, an appropriate gas flow chemistry model needs …
Modeling Of Heat Transfer Attenuation By Ablative Gases During The Stardust Re-Entry, Alexandre Martin, Iain D. Boyd
Modeling Of Heat Transfer Attenuation By Ablative Gases During The Stardust Re-Entry, Alexandre Martin, Iain D. Boyd
Mechanical Engineering Faculty Publications
The great majority of modern space vehicles designed for planetary exploration use ablative materials to protect the payload against the high heating environment experienced during re-entry. In order to properly model and predict the aerothermal environment of the vehicle, it is imperative to account for the gases produced by ablation processes. In the case of charring ablators, where an inner resin is pyrolyzed at a relatively low temperature, the composition of the gas expelled into the boundary layer is complex and may lead to thermal chemical reactions that cannot be captured with simple flow chemistry models. In order to obtain …
Effect Of Applied Magnetic Field On Shock Boundary Layer Interaction, Ovais U. Khan, Alexandre Martin
Effect Of Applied Magnetic Field On Shock Boundary Layer Interaction, Ovais U. Khan, Alexandre Martin
Mechanical Engineering Faculty Publications
The governing magneto-hydrodynamic (MHD) equations contain classical fluid dynamics equations along with coupled Maxwell’s magnetic induction equations. These equations model both advection and diffusion effects of electromagnetic field. However, available literature indicates that some previous investigations neglect the diffusion of magnetic field and considered only ideal MHD equations for modeling a typical MHD problem. In this work, the effects of magnetic field diffusion term also known as viscous magnetic term have been investigated over flow structure. Low magnetic Reynolds number approximation and ideal full MHD set of equations have been considered and solved using a four-stage modified Runge-Kutta scheme augmented …
Numerical Modeling Of The Cn Spectral Emission Of The Stardust Re-Entry Vehicle, Alexandre Martin, Erin D. Farbar, Iain D. Boyd
Numerical Modeling Of The Cn Spectral Emission Of The Stardust Re-Entry Vehicle, Alexandre Martin, Erin D. Farbar, Iain D. Boyd
Mechanical Engineering Faculty Publications
Re-entry vehicles designed for space exploration are usually equipped with thermal protection systems made of ablative material. In order to properly model and predict the aerothermal environment of the vehicle, it is imperative to account for the gases produced by ablation processes. In the case of charring ablators, where an inner resin is pyrolyzed at a relatively low temperature, the composition of the gas expelled into the boundary layer is complex and may lead to thermal chemical reactions that cannot be captured with simple ow chemistry models. In order to obtain better predictions, an appropriate gas ow chemistry model needs …