Engineering Commons^™

A "Divide-And-Conquer" Strategy For Nde Signal Inversion In Gas Transmission Pipelines, Justin Gary Bram

Theses and Dissertations

Signal inversion in nondestructive evaluation (NDE) applications is a critical step before remediation decisions are made. The accuracy and confidence of the signal inversion results therefore play a key role in evaluating the effectiveness of the NDE procedure. Conventional NDE signal inversion algorithms that employ artificial neural networks treat all geometric regions of the NDE signal equally. Consequently, when the inversion algorithm is presented with input data that is significantly different from the training data, the performance of the network deteriorates significantly. This thesis presents a superior alternative for NDE signal inversion. Different geometric regions of the NDE signature are …

Use Of Principal Component Analysis With Linear Predictive Features In Developing A Blind Snr Estimation System, Matthew James Marbach

Theses and Dissertations

Signal-to-noise ratio is an important concept in electrical communications, as it is a measurable ratio between a given transmitted signal and the inherent background noise of a transmission channel. Currently signal-to-noise ratio testing is primarily performed by using an intrusive method of comparing a corrupted signal to the original signal and giving it a score based on the comparison. However, this technique is inefficient and often impossible for practical use because it requires the original signal for comparison. A speech signal's characteristics and properties could be used to develop a non-intrusive method for determining SNR, or a method that does …

Random Feature Subspace Ensemble Based Approaches For The Analysis Of Data With Missing Features, Hussein Syed Mohammed

Theses and Dissertations

Missing data in real world applications is not an uncommon occurrence. It is not unusual for training, validation or field data to have missing features in some (or even all) of their instances, as bad sensors, failed pixels, malfunctioning equipment, unexpected noise causing signal saturation, data corruption, and so on, are all familiar scenarios in many practical applications.

In this thesis, the feasibility of an ensemble of classifiers trained on a feature subset space is investigated as an effective and practical solution for the missing feature problem. Two ensemble of classifiers approach motivated by the Random Subspace Method are proposed …

An Architecture For Intelligent Health Assessment Enabled Ieee 1451 Compliant Smart Sensors, Donald Albert Nickles

Theses and Dissertations

As systems become increasingly complex and costly, potential failure mechanisms and indicators are numerous and difficult to identify, while the cost of loss is very expensive - human lives, replacement units, and impacts to national security. In order to ensure the safety and long-term reliability of vehicles, structures, and devices attention must be directed toward the assessment and management of system health. System health is the key component that links data, information, and knowledge to action. Integrated Systems Health Management (ISHM) doctrine calls for comprehensive real-time health assessment and management of systems where the distillation of raw data into information …

Data Fusion Of Complementary Information From Parietal And Occipital Event Related Potentials For Early Diagnosis Of Alzheimer's Disease, Nicholas Stepenosky

Theses and Dissertations

The number of the elderly population affected by Alzheimer's disease is rapidly rising. The need to find an accurate, inexpensive, and non-intrusive procedure that can be made available to community healthcare providers for the early diagnosis of Alzheimer's disease is becoming an increasingly urgent public health concern. Several recent studies have looked at analyzing electroencephalogram signals through the use of many signal processing techniques. While their methods show great promise, the final outcome of these studies has been largely inconclusive. The inherent difficulty of the problem may be the cause of this outcome, but most likely it is due to …

Boosted Ensemble Algorithm Strategically Trained For The Incremental Learning Of Unbalanced Data, Michael David Muhlbaier

Theses and Dissertations

Many pattern classification problems require a solution that needs to be incrementally updated over a period of time. Incremental learning problems are often complicated by the appearance of new concept classes and unbalanced cardinality in training data. The purpose of this research is to develop an algorithm capable of incrementally learning from severely unbalanced data. This work introduces three novel ensemble based algorithms derived from the incremental learning algorithm, Learn++. Learn++.NC is designed specifically for incrementally learning New Classes through dynamically adjusting the combination weights of the classifiers' decisions. Learn++.UD handles Unbalanced Data through class-conditional voting …

Multiresolution Wavelet Analysis Of Event-Related Eeg Potentials Using Ensemble Of Classifier Data Fusion Techniques For Early Diagnosis Of Alzheimer's Disease, Apostolos Topalis

Theses and Dissertations

The recent advances and knowledge in medicine and nutrition have greatly improved our average life expectancy. An unfortunate consequence of this longer life span, however, is a dramatic increase in the number of individuals suffering from dementia, and more specifically, from Alzheimer's disease (AD). Furthermore, AD remains under-diagnosed and under-treated until its more severe stages due to lack of standard diagnostic tools available to community clinics. A search for biomarkers that will allow early diagnosis of the disease is therefore necessary to develop effective medical treatments. Such a biomarker should be non-invasive, simple to obtain, safe, inexpensive, accurate, and most …

Structuring Emperical Methods For Reuse And Efficiency In Product Development Processes, Marshall Edwin Bare

Theses and Dissertations

Product development requires that engineers have the ability to predict product performance. When product performance involves complex physics and natural phenomena, mathematical models are often insufficient to provide accurate predictions. Engineering companies compensate for this deficiency by testing prototypes to obtain empirical data that can be used in place of predictive models. The purpose of this work is to provide techniques and methods for efficient use of empirical methods in product development processes. Empirical methods involve the design and creation of prototype hardware and the testing of that hardware in controlled environments. Empirical methods represent a complete product development sub-cycle …

Wavefront Curvature Sensing From Image Projections, Jonathan C. Buffington

Theses and Dissertations

This research outlines the development and simulation of a signal processing approach to real time wavefront curvature sensing in adaptive optics. The signal processing approach combines vectorized Charge Coupled Device (CCD) read out with a wavefront modal estimation technique. The wavefront sensing algorithm analyzes vector projections of image intensity data to provide an estimate of the wavefront phase as a combination of several low order Zernike polynomial modes. This wavefront sensor design expands on an existing idea for vector based tilt sensing by providing the ability to compensate for additional modes. Under the proposed wavefront sensing approach, the physical wavefront …

Reconstructing Spectral Scenes Using Statistical Estimation To Enhance Space Situational Awareness, Travis F. Blake

Theses and Dissertations

A new sensor, the Advanced Electro-Optical System (AEOS) Spectral Imaging Sensor (ASIS) has been developed at the Maui Space Surveillance Complex (MSSC). ASIS is capable of collecting resolved imagery of space objects in 10's-100's of spectral bands while using an adaptive optics system. However, the stringent requirements of collecting ground-based images requires a sensor that induces spectral blurring. Post-processing algorithms to remove this blurring are required to fully exploit these spectral images. This research focuses on developing the reconstruction algorithms, based on proven estimation theories, required to spectrally deblur the images collected from ASIS. Additionally, the research will expand the …

The Piezoresistive Effect In Microflexures, Gary K. Johns

Theses and Dissertations

The objective of this research is to present a new model for predicting the piezoresistive effect in microflexures experiencing bending stresses. A linear model describing piezoresistivity exists for members in pure tension and compression. Extensions of this model to more complex loading conditions do not match experimental results. An accurate model of piezoresistivity in complex loading conditions would expand the design possibilities of piezoresistive devices. A new model to predict piezoresistive effects in tension, compression, and more complex loading conditions is proposed. The focus of this research is to verify a unidirectional form of this proposed model for microflexures in …

Statistical Methods For Kinetic Modeling Of Fischer Tropsch Synthesis On A Supported Iron Catalyst, Brian L. Critchfield

Theses and Dissertations

Fischer-Tropsch Synthesis (FTS) is a promising technology for the production of ultra-clean fuels and chemical feedstocks from biomass, coal, or natural gas. Iron catalysts are ideal for conversion of coal and biomass. However, precipitated iron catalysts used in slurry-bubble column reactors suffer from high attrition resulting in difficulty separating catalysts from product and increased slurry viscosity. Thus, development of an active and selective-supported iron catalyst to manage attrition is needed. This thesis focuses on the development of a supported iron catalyst and kinetic models of FTS on the catalyst using advanced statistical methods for experimental design and analysis. A high …

Branch Detonation Of A Pulse Detonation Engine With Flash Vaporized Jp-8, John David Slack

Theses and Dissertations

Pulse Detonation Engines (PDE) operating on liquid hydrocarbon fuels are limited to operating frequencies of 35 Hz due to long ignition times from a low energy ignition sources. This study shows ignition time of JP-8 can be nearly eliminated by igniting a thrust tube using a secondary detonation. A counter flow heat exchanger attached to a thrust tube utilized waste heat from the detonation process to heat JP-8 to supercritical conditions. The fuel flash vaporized when injected into the air stream of the engine. A detonation was produced by a spark in a 5 cm diameter, 1.37 m long tube. …

Observation And Tracking Of Tropical Cyclones Using Resolution Enhanced Scatterometry, Richard Ryan Halterman

Theses and Dissertations

The QuikSCAT scatterometer provides global daily coverage of oceanic near-surface vector winds. Recently, algorithms have been developed to enhance the spatial resolution of QuikSCAT winds from 25~km to 2.5~km posting. These ultra-high resolution winds are used, in comparison with standard L2B data product winds, to observe and track tropical cyclones. Resolution enhanced winds are found to provide additional storm structure such as inner core size and structure and the presence of multiple eyewalls compared with standard resolution winds. The 2.5~km winds are also able to observe storms nearer to the shore than 25~km winds. An analysis of circulation center locatability …

An Analysis Of The Accounting Methods Used By Builders Producing Twenty-Five Or Fewer Homes Per Year, David Andrus

Theses and Dissertations

Accounting plays a crucial role in the success of any business, but it is particularly vital in the construction industry, a complex field that typically requires the coordination of multiple subcontractors and multiple jobs in any given year. Although small-volume home builders make up 70 percent of the membership of the National Association of Home Builders (NAHB), a trade association of the home building industry, little is known about the accounting practices of these builders. This thesis undertook to study the accounting practices of small-volume home builders. Small-volume home builders were defined as those producing 25 homes or fewer in …

A Dynamic Workflow Framework For Mass Customization Using Web Service And Autonomous Agent Technologies, Daniel J. Karpowitz

Theses and Dissertations

Custom software development and maintenance is one of the key expenses associated with developing automated systems for mass customization. This paper presents a method for reducing the risk associated with this expense by developing a flexible environment for determining and executing dynamic workflow paths. Strategies for developing an autonomous agent-based framework and for identifying and creating web services for specific process tasks are presented. The proposed methods are outlined in two different case studies to illustrate the approach for both a generic process with complex workflow paths and a more specific sequential engineering process.

A Torque Based Power Input Model For Friction Stir Welding, Jefferson W. Pew

Theses and Dissertations

For decades models have been developed for predicting the size of the weld nugget and heat affected zones in fusion welded structures. The basis for these models is the welding heat input, which is fairly well understood for most arc welding processes. However, this traditional approach is not as straightforward for Friction Stir Welding (FSW). To date, there is no definitive relationship to quantify the heat input for FSW. An important step to establish a heat input model is to identify how FSW process parameters affect weld power. This study details the relationship between FSW process parameters and torque for …

Design And Construction Of Pavements In Cold Regions: State Of The Practice, Brad Steven Smith

Theses and Dissertations

The effects of frost action introduce many challenges in the design and construction of roadways in cold regions throughout the United States. The penetration of frost into pavement structures can lead to differential frost heave during winter and thaw weakening during spring. Both of these damage mechanisms lead to premature pavement distress, structural deterioration, and poor ride quality. Because the availability of naturally occurring non-frost-susceptible pavement base materials is rapidly diminishing in many areas while project budgets remain largely inadequate, pavement engineers are utilizing alternative materials and techniques to minimize such damage. The purpose of this research was to investigate …

Shape Matching, Relevance Feedback, And Indexing With Application To Spine X-Ray Image Retrieval, Xiaoqian Xu

Theses and Dissertations

The National Library of Medicine (NLM), an institute in the National Institutes of Health (NIH), maintains a collection of 17,000 digitized spine X-ray images obtained from the second National Health and Nutrition Examination Survey (NHANES II). Research effort has been devoted to develop a web-accessible retrieval system that allows retrieval of images from the NHANES II database on relevant and frequently found pathologies. A comprehensive and successful image retrieval system requires effective image representation and matching methods, relevance feedback algorithms to incorporate user opinions, and efficient indexing schemes for fast access to image databases. This dissertation studies and develops approaches …

Large 3-D Deflection And Force Analysis Of Lateral Torsional Buckled Beams, Robert Parley Chase

Theses and Dissertations

This thesis presents research on the force and deflection behavior of beams with rectangular cross-sections undergoing lateral torsional buckling. The large 3-D deflection path of buckling beam tips was closely approximated by circular arcs in two planes. A new chain algorithm element was created from pseudo-rigid-body segments and used in a chain calculation that accurately predicted the force deflection relationship of beams with large 3-D deflections.

Using Duplication With Compare For On-Line Error Detection In Fpga-Based Designs, Daniel L. Mcmurtrey

Theses and Dissertations

Space destined FPGA-based systems must employ redundancy techniques to account for the effects of upsets caused by radiated environments. Error detection techniques can be used to alert external systems to the presence of these upsets. Readback with compare is an error detection technique commonly employed in FPGA-based designs. This work introduces duplication with compare (DWC) as an automated on-line error detection technique that can be used as an alternative to readback with compare. This work also introduces a set of metrics that is used to quantify the effectiveness and coverage of this error detection technique. A tool is presented that …

Impact Of Wastewater Reuse In Burlington County On Surface Water Quality And Adjacent Wetlands, Crystal L. Mattson

Theses and Dissertations

This study was conducted to assess potential ecological impacts from application of treated wastewater effluent. Indian Springs Golf Course is currently irrigated with reclaimed wastewater. Grab water samples were collected from three (3) ponds located on the golf course over the course of a year and were analyzed for nitrate-nitrogen, total phosphorus, organics, and bacteria. A second golf course, Medford Lakes Country Club is currently irrigated with groundwater. Grab water samples were collected from both locations and analyzed for nutrients and bacteria for comparison purposes.

Results of sample analyses indicate that detriment to the quality of surface water at the …

Vacuum Chamber Construction And Contamination Study Of A Micro Pulsed Plasma Thruster, Jacob H. Debevec

Theses and Dissertations

The micro pulsed plasma thruster (micro-PPT) is a simple and versatile electric thruster capable of performing multiple missions, from precise attitude control on standard satellites to primary propulsion for nanosatellites. In order to fill this role as both industry and government move toward utilizing smaller satellites, micro-PPTs first need to be thoroughly tested on the ground. This study examines the deposition profile and rate of particle emission from the thruster so that satellite designers understand any potential contamination issues with sensitive instruments and solar panels. Employing a newly assembled vacuum chamber system, four tests were completed with the micro-PPTs, and …

An Exploration Of Several Structural Measurement Techniques For Usage With Functionally Graded Materials, Robert A. Reuter

Theses and Dissertations

Titanium / titanium boride functionally graded 6"x 1"x1" beams were subjected to a four-point beam test in order to critique the value of several measurement techniques. Also, finite element analysis results were compared with experimental values and general observations about the experiment were recorded. Uniform 85% TiB /15% Ti and uniform commercially pure titanium specimens were also subjected to the same loading conditions as a control. Techniques used include digital image correlation, fiber optic strain gauging, strain gauging, and differential infrared thermography techniques. The strain data results were compared with one another and to linear finite element models. It was …

Robust Estimation Of Mahalanobis Distance In Hyperspectral Images, Eduardo C. Meidunas

Theses and Dissertations

This dissertation develops new estimation methods that fit Johnson distributions and generalized Pareto distributions to hyperspectral Mahalanobis distances. The Johnson distribution fit is optimized using a new method which monitors the second derivative behavior of exceedance probability to mitigate potential outlier effects. This univariate distribution is then used to derive an elliptically contoured multivariate density model for the pixel data. The generalized Pareto distribution models are optimized by a new two-pass method that estimates the tail-index parameter. This method minimizes the mean squared fitting error by correcting parameter values using data distance information from an initial pass. A unique method …

Integrated Conceptual Design Of Joined-Wing Sensor Craft Using Response Surface Models, Josh E. Dittmar

Theses and Dissertations

A multidisciplinary conceptual design and analysis of Boeing's joined-wing SensorCraft has been conducted. This analysis was completed using geometrical optimization, aerodynamic analyses, and response surface methodology on a composite structural model. Phoenix Integration's Model Center was used to integrate the sizing and analysis codes found in Raymer's text, "Aircraft Design: A Conceptual Approach" as well as those from the NASA derived conceptual design tool AirCraft Synthesis (ACSYNT), and a modified Boeing Finite Element Model (FEM). This research demonstrated the utility of integrated low-order models for fast and inexpensive conceptual modeling of unconventional aircraft designs.

Utah Commercial Motor Vehicle Weigh-In-Motion Data Analysis And Calibration Methodology, Luke W. Seegmiller

Theses and Dissertations

In preparation for changes in pavement design methodologies and to begin to assess the effectiveness of the weigh-in-motion (WIM) system in Utah, the Utah Department of Transportation (UDOT) contracted with a Brigham Young University (BYU) research team to conduct an evaluation of their commercial motor vehicle (CMV) data collection system statewide. The objective of this research was to evaluate the CMV data collection program in the state of Utah and to make limited recommendations for potential improvements and changes that will aid in more detailed and accurate CMV data collection across the state. To accomplish the research objectives, several tasks …

Defining A Model For Tool Consumption Rate On Asphalt Reclamation Machines, Matthew H. Taylor

Theses and Dissertations

Asphalt and concrete reclamation machines are used to cut roadways when a repair is required. The performance of these machines can affect the quality of road repairs, and cost/profitability for both contractors and governments. We believe that several performance characteristics in reclamation machines are governed by the placement and pattern of cutting picks on the cutter head. Previous studies, focused on mining and excavation applications, have shown strong correlation between placement and wear. The following study employs a screening experiment (observational study) to find significant contributors to tool wear, in applications of asphalt milling or reclamation. We have found that …

Consolidation And Interweaving Of Composite Members By A Continuous Manufacturing Process, Sarita L. Kesler

Theses and Dissertations

Recent research and development has resulted in a working prototype of an automated process for manufacturing IsoTruss® and other innovative open lattice composite structures which yields faster, and more predictable and consistent parts, while automatically consolidating individual members. This machine is sufficiently versatile to manufacture any type of open lattice structure fabricated from filamentary composite materials. The objectives of the research in this thesis were two-fold: (1) to validate this new process for making IsoTruss structures; and (2) to measure the compression strength and stiffness of specimens produced on the machine. In order to accomplish the first purpose, various parts …

A New Spectroscopic Method For The Non-Destructive Characterization Of Weathering Damage In Plastics, Andrew Robert George

Theses and Dissertations

The weathering of plastics and composites is a problem because of the loss of both physical and mechanical properties that it causes in these materials. But this weathering effect has been difficult, and in some cases, impossible to characterize without the destruction of the plastic or composite part. Clearly a rapid, reliable, and non-destructive test for the extent of the weathering damage is critically needed. A recent problem that arose at Superyacht Solutions, a boat repair company in Australia, required a solution to just this problem. Such a test was developed for Superyacht Solutions, and is being applied across a …