Engineering Commons^™

A Micromachined Thermo-Optical Light Modulator Based On Semiconductor-To-Metal Phase Transition, Lijun Jiang

Dissertations

In this research, a micromachined thermo-optical light modulator was realized based on the semiconductor-to-metal phase transition of vanadium dioxide (VO₂) thin film. VO₂ undergoes a reversible phase transition at approximately 68 0C, which is accompanied with drastic changes in its electrical and optical properties. The sharp electrical resistivity change can be as great as five orders. Optically, VO₂ film will switch from a transparent semiconductor phase to a reflective metal phase upon the phase transition. The light modulator in this research exploits this phase transition related optical switching by using surface micromachined low-thermal-mass pixels to achieve …

Intercity Travel Demand : A Utility-Consistent Simultaneous Trip Generation And Mode Choice Model, Guilin Li

Dissertations

An intercity travel decision includes a complex set of subdecisions, such as when to travel, where to travel, which mode to choose, and others. The main focus of this dissertation is to examine trip frequency and mode choice of intercity non-business travel.

The objective of this study is to understand intercity travel behavior using disaggregate models. The proposed conceptual framework for intercity travel behavior leads to a nested logit/continuous choice model that is rigorously linked to the utility maximization theory. Compared to a traditional intercity travel demand model, the proposed model is utility consistent in that trip generation and mode …

Effect Of Fullerene Containing Lubricants On Wear Resistance Of Machine Components In Boundary Lubrication, Andriy Titov

Dissertations

Fullerenes, a new form of carbon nanomaterials, possess unique physical and mechanical properties that make their use as additives to liquid lubricants potentially beneficial. The goal of this study was to investigate the effect of fullerene containing lubricants on wear resistance of steel-bronze couples operating under boundary lubrication conditions. A mathematical model of deformed asperity contact was built to calculate real contact area and real contact pressure. Computer controlled wear friction testing methodology and equipment were designed, developed and implemented for obtaining reliable and objective experimental data. In addition, optical and scanning electron microscopy and standard surface texture analysis were …

Migration Of An Intruder Particle In A Boundary Driven Shear Flow, Jian Liu

Dissertations

This study reports on three-dimensional, discrete element simulations of a single large spherical intruder in a Couette shear flow composed of uniform sized particles. The simulation results are useful in providing a numerical reproduction of the experiments for size segregation and mixing. This in turn has a major importance in many industries which are concerned with handling of particles and powders, such as pharmaceutical manufacturing, agriculture, chemical and mineral processing.

Discrete element simulations are carried out using the "soft sphere" model of Walton, et. al., which provides a method for obtaining the information at a macroscopic level from multi-body collisions …

Reactive Modification Of Polyesters And Their Blends, Chen Wan

Dissertations

As part of a broader research effort to investigate the chemical modification of polyesters by reactive processing a low molecular weight (MW) unsaturated polyester (UP) and a higher MW saturated polyester, polyethylene terephthalate (PET), alone or blended with polypropylene (PP) were melt processed in a batch mixer and continuous twin screw extruders. Modification was monitored by on-line rheology and the products were characterized primarily by off-line rheology, morphology and thermal analysis. Efforts were made to establish processing/property relationships and provide an insight of the accompanying structural changes. The overall response of the reactively modified systems was found to be strongly …

Oblivious Data Hiding : A Practical Approach, Husrev T. Sencar

Dissertations

This dissertation presents an in-depth study of oblivious data hiding with the emphasis on quantization based schemes. Three main issues are specifically addressed:

1. Theoretical and practical aspects of embedder-detector design.

2. Performance evaluation, and analysis of performance vs. complexity tradeoffs.

3. Some application specific implementations.

A communications framework based on channel adaptive encoding and channel independent decoding is proposed and interpreted in terms of oblivious data hiding problem. The duality between the suggested encoding-decoding scheme and practical embedding-detection schemes are examined. With this perspective, a formal treatment of the "processing" employed in quantization based hiding methods is presented. In …

Fabrication And Characterization Of Microcrystalline Silicon Solar Cells, Liwei Li

Dissertations

In this study, single junction p-i-n μc-Si:H solar cells were prepared using plasma of silane diluted by hydrogen in a low-cost, single chamber, non-load-locked RF-PECVD system. Direct structural characterization of μc-Si:H solar cells, rather than stand-alone films, was conducted using Raman Spectroscopy, XRD, and AFM. Strong correlations among device deposition, i-layer structural properties, and device performance have been established. With such correlations, critical issues in fabricating low-cost, large-scale, high performance μc-Si:H solar cells were identified.

The critical importance of seeding processes in determining the microstructure of μc-Si:H i-layers and performance of μc-Si:H solar cells has been demonstrated. Using …

Studies On Improved Integrated Membrane-Based Chromatographic Process For Bioseparation, Yanke Xu

Dissertations

To improve protein separation and purification directly from a fermentation broth, a novel membrane filtration-cum-chromatography device configuration having a relatively impermeable coated zone near the hollow fiber module outlet has been developed. The integrated membrane filtration-cum-chromatography unit packed with chromatographic beads on the shell side of the hollow fiber unit enjoys the advantages of both membrane filtration and chromatography; it allows one to load the chromatographic media directly from the fermentation broth or lysate and separate the adsorbed proteins through the subsequent elution step in a cyclic process.

Interfacial polymerization was carried out to coat the bottom section of the …

The Use Of A Water Quality Model To Evaluate The Impacts Of Combined Sewer Overflows On The Lower Hudson River, Wen-Pin Shu

Dissertations

CSO discharges have long been recognized as a significant source of water pollution. While many sources of water pollution have been controlled over the past 20 years, CSOs continue to be a main environmental concern in several areas, especially in old cities. In the past, most CSO research focused on the CSO control processes, including floatables and suspended solids removal. Few studies have been conducted in the area of the impacts of CSO discharge on the receiving water quality. To achieve this purpose, a powerful water-modeling tool, WASP 6.1, is utilized in this study. The Lower Hudson River is selected …

Vibration-Induced Densification Of Granule Materials, Ninghua Zhang

Dissertations

Physical experiments as well as discrete element simulations of vibration are carried out. The use of different amplitudes and frequencies are applied in the experiments to facilitate the observation of densification trends with mono-disperse acrylic spheres and multi-disperse polyethylene pellets. For mono-disperse acrylic spheres, four densification trends are found at different vibration conditions, and attaining the "maximum density" is closely related to the combination of vibration frequency and amplitude, in agreement with experiments in the literature. For multi-disperse polyethylene pellets, there is a substantial increase in solids fraction due to the effects of particle shape and surface friction. Computer simulations …

Multi-Spectral Light Interaction Modeling And Imaging Of Skin Lesions, Sachin Vidyanand Patwardhan

Dissertations

Nevoscope as a diagnostic tool for melanoma was evaluated using a white light source with promising results. Information about the lesion depth and its structure will further improve the sensitivity and specificity of melanoma diagnosis. Wavelength-dependent variable penetration power of monochromatic light in the trans-illumination imaging using the Nevoscope can be used to obtain this information. Optimal selection of wavelengths for multi-spectral imaging requires light-tissue interaction modeling. For this, three-dimensional wavelength dependent voxel-based models of skin lesions with different depths are proposed. A Monte Carlo simulation algorithm (MCSVL) is developed in MATLAB and the tissue models are simulated using the …

Ip-Based Virtual Private Networks And Proportional Quality Of Service Differentiation, Jingdi Zeng

Dissertations

IP-based virtual private networks (VPNs) have the potential of delivering cost-effective, secure, and private network-like services. Having surveyed current enabling techniques, an overall picture of IP VPN implementations is presented.

In order to provision the equivalent quality of service (QoS) of legacy connection-oriented layer 2 VPNs (e.g., Frame Relay and ATM), IP VPNs have to overcome the intrinsically best effort characteristics of the Internet. Subsequently, a hierarchical QoS guarantee framework for IP VPNs is proposed, stitching together development progresses from recent research and engineering work.

To differentiate IP VPN QoS, the proportional QoS differentiation model, whose QoS specification granularity compromises …

Dielectrophoretic Manipulation Of Biological And Non-Biological Analytes In A Microfluidic Channel, Dawn J. Bennett

Dissertations

Micro-total-analytical systems (μTASs) for analyzing chemical/biological substances are now used across a wide variety of applications ranging from biological warfare agent detection to the healthcare industry. The first step in the operation of a μTAS consists of concentrating and separating the analytes of interest from the background matrix and positioning them into selected locations for subsequent analysis. The use of ac electric fields was demonstrated to have promising potential for a μTAS because the application of an ac field suppresses undesirable electrolytic effects in the liquid. The main purpose of this work is to study micro-scale phenomena in a flowing …