Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Publication Year
- Publication
- Publication Type
Articles 31 - 60 of 70
Full-Text Articles in Engineering
Electrodeposition Of Copper From A Choline Chloride Based Ionic Liquid, Rostom Ali M., Ziaur Rahman Md., Sankarsaha S.
Electrodeposition Of Copper From A Choline Chloride Based Ionic Liquid, Rostom Ali M., Ziaur Rahman Md., Sankarsaha S.
Journal of Electrochemistry
The electrodeposition of copper from a solution containing copper chloride in either an ethylene glycol (EG)-choline chloride based or a urea-choline chloride based ionic liquid has been carried out onto a steel cathode by constant current and constant potential methods at room temperature. The influences of various experimental conditions on electrodeposition and the morphology of the deposited layers have been investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). It is shown that very smooth, shiny and dense with good adherence and bright metallic coloured copper coatings can be obtained from both EG and urea based ionic liquids at …
Electrochemical Preparation Of Nanostructural Pt-Ni And Pd-Ni Films For Ethanol Electro-Oxidation, Chen-Zhong Yao, Hui-Xuan Ma, Bo-Hui Wei
Electrochemical Preparation Of Nanostructural Pt-Ni And Pd-Ni Films For Ethanol Electro-Oxidation, Chen-Zhong Yao, Hui-Xuan Ma, Bo-Hui Wei
Journal of Electrochemistry
The Pt-Ni and Pd-Ni films were successfully prepared on Ti substrates by electrodeposition method. The porous Pt-Ni nanoflakes appeared to be uniform with the thickness of the slices about 10 ~ 20 nm. The porous Pd-Ni nanoparticles with a flower shape appeared to be uniform with the diameters of 50 ~ 60 nm. The XRD patterns also indicated that the Pd-Ni and Pt-Ni nanostructures have the poor crystallinity. The onset potentials of ethanol oxidation were negatively shifted to –0.74 V on Pt-Ni electrodes and –0.71 V on Pd-Ni electrodes, respectively. Addition of Ni could enhance catalytic activities and antitoxic properties …
Anode Electrodeposition Of Ti/Mno2 Electrode And Electrocatalytic Oxidization Properties Of Phenol Degradation, Ye Chen, Wen-Li Zhao, Qing Wen
Anode Electrodeposition Of Ti/Mno2 Electrode And Electrocatalytic Oxidization Properties Of Phenol Degradation, Ye Chen, Wen-Li Zhao, Qing Wen
Journal of Electrochemistry
Ti-base manganese dioxide (Ti/MnO2) electrode was prepared by anodically electrodeposition technology in this paper. The structure of the electrode, the microstructure of the electrode surface and the element composition of the electrode were analyzed by XRD, SEM and EDS. The preparation process parameters of the electrode were studied in detail with the help of the V~logi curve and phenol degradation curve. The Ti/MnO2 electrode was anodically electrodeposited at current density 4mA•cm-2, the Mn2 + ions concentration 0.5mol•L-1 and temperature70℃. The V~logi curve and phenol degradation curve were used to evaluate electrocatalytic oxidization properties of the electrode with phenol as the …
Electrodeposition Of Lead Dioxide From Dluoroborate Solutions, Chun-Mei Kong, Yong-Ming Tang, Wen-Zhong Yang, Xiao-Yuan Yang
Electrodeposition Of Lead Dioxide From Dluoroborate Solutions, Chun-Mei Kong, Yong-Ming Tang, Wen-Zhong Yang, Xiao-Yuan Yang
Journal of Electrochemistry
The PbO2 anodes were prepared on platinum from fluoroborate media and its doped solutions by electrodeposition technique.Elecchemical and pysicochemical properties of these PbO2 films were studied by cyclic voltammetry methods,XRD and SEM.The results showed that the presence of BF4-increased PbO2 electrodeposition rate;the prepared lead dioxide consisted of β-PbO2;the preferential orientation of crystals and surface morphology were affected a lot by doping F-and Fe3+.The FB/F-Fe-PbO2 electrode exhibited regular-shaped layers with compact morphology.Furthermore,increasing current density also change the preferential orientation of PbO2 crystals.
Study Of Electrodes Modified With Hybrid Copper Cobalt Hexacyanoferrate-Mwcnts Composites, Shan Jiang, Yun Zhang, Xiao-Yan Wang, Xiao-Fei Yao
Study Of Electrodes Modified With Hybrid Copper Cobalt Hexacyanoferrate-Mwcnts Composites, Shan Jiang, Yun Zhang, Xiao-Yan Wang, Xiao-Fei Yao
Journal of Electrochemistry
The hybrid modified electrodes were obtained by electrochemical deposition of copper-cobalt hexacyanoferrate(CuCoHCF) /multi-walled carbon nanotubes(MWCNTs) on the surface of glassy carbon electrode.The effects of the amount of MWCNTs and composition of electrolyte on the properties of modified electrode had been researched.The copper cobalt hexacyanoferrate-MWCNTs modified electrodes show excellent electrochemical properties compared with that modified only copper-cobalt hexacyanoferrate.The CuCoHCF-MWCNTs/GCE exhibits obvious electrocatalytic activity towards oxidation of hydrogen peroxide.The oxidation peak current increased linearly with the concentration of hydrogen peroxide in the range of 3.16 × 10-5 ～ 2.92 × 10-3 mol· L-1.The linear equation is given up ip(μA) = 0.5529 + …
Electrocatalytic Reduction Of L-Cystine At Pb/Nanotio_2 Film Electrode, Dao-Bao Chu, Feng Wang, Ying Xiao, Xue-Jiao Zhang
Electrocatalytic Reduction Of L-Cystine At Pb/Nanotio_2 Film Electrode, Dao-Bao Chu, Feng Wang, Ying Xiao, Xue-Jiao Zhang
Journal of Electrochemistry
The nanoporous Ti-based TiO2 films electrodes modified with Pb particles(Pb/nanoTiO2) were prepared by using anodization and potentiostatic electro-deposition.The optimum deposition conditions were determined by comparing with various deposition potentials and time.The SEM analyses indicated that the TiO2 films were homogeneous nanoporous structure,and the Pb particles well dispersed on the TiO2 films.The L-cystine electrocatalytic activity reduction on the Pb/nanoTiO2 film electrodes was investigated by cyclic voltammetry and Chronoamperometric curves.The results showed that this type of the electrode posseses high acticity and stability.
Preparation Of Pt Nanoflower/Zno Composites Arrays And Their Electrocatalysis For Methanol Oxidation, Li Gao, Yi-Feng E, Lou-Zhen Fan
Preparation Of Pt Nanoflower/Zno Composites Arrays And Their Electrocatalysis For Methanol Oxidation, Li Gao, Yi-Feng E, Lou-Zhen Fan
Journal of Electrochemistry
The Pt nanoflower/ZnO(PtNF/ZnO) nanorod composites arrays were electrochemically prepared by controlling the hydrophobicity and the hydrophilicity of ZnO nanorods arrays.The Pt nanoflowers grew on the tip of ZnO nanorods,which maintain the vertical array of Zno nanorods with a high degree of size uniformity and high surface area.Compared with Pt nanoparticle covered ZnO nanorod arrays,which were prepared by controlling the hydrophilicities of ZnO nanorods and Pt nanoparticles,the PtNF/ZnO displayed highest electrocatalytic activities for the oxidation of methanol.
Electrodeposition Of Nanocrystalline Ni-Based Alloys, Hanseung Park
Electrodeposition Of Nanocrystalline Ni-Based Alloys, Hanseung Park
All Theses
Nanocrystalline materials can often process superior properties, but they are generally unstable against grain growth. Addition of a dopant can stabilize nanocrystalline alloys by decreasing the excess grain boundary energy as the thermodynamic driving force for grain growth and reducing grain boundary mobility via a kinetic effect of solute drag. In this thesis study, eight Ni-based alloys (Ni-W, Ni-P, Ni-Mo, Ni-Cu, Ni-B, Ni-Mg, Ni-Zn and Ni-Co) and pure Ni were made using an electrodeposition method. It is concluded that the use of different dopant can drastically affect the deposition mechanism as well as the morphology of resultant films. Ni-W and …
Electrodeposition Of Al On Magnesium Alloy In Ionic Liquid, Tsai Wen-Ta, Shu-You Chen, Mu-Huan Zhuang, Chang Jeng-Kuei, Yi-Wen Sun
Electrodeposition Of Al On Magnesium Alloy In Ionic Liquid, Tsai Wen-Ta, Shu-You Chen, Mu-Huan Zhuang, Chang Jeng-Kuei, Yi-Wen Sun
Journal of Electrochemistry
Electrodeposition of a metallic aluminum on a magnesium alloy in acidic aluminum chloride-1-ethyl-3-methylimidazolium chloride ionic liquids(AlCl3-EMIC) was investigated.The effects of current density and AlCl3 content in the ionic liquid on the electrodeposition behavior were studied.The results showed that aluminum could be successfully electrodeposited on the AZ91D substrate.At-0.2 V,the ionic liquid containing 60 m/o AlCl3 was optimum for Al electrodeposition.The current efficiency was higher if electrodeposition was performed at a lower applied current density.The existence of Al coating could caused a substantial increase in open circuit potential,reducing the susceptibility of Mg alloy to corrosion.The results of electrochemical impedance spectroscopy showed that …
Electrodeposition Of Nickel Nanowires And Nanotubes Using Various Templates, Asli Ertan, Surendra N. Tewari, Orhan Talu
Electrodeposition Of Nickel Nanowires And Nanotubes Using Various Templates, Asli Ertan, Surendra N. Tewari, Orhan Talu
Chemical & Biomedical Engineering Faculty Publications
Nickel nanotubes and nanowires are grown by galvanostatic electrodeposition in the pores of 1000, 100, and 15 nm polycarbonate as well as in anodised alumina membranes at a current density of 10 mA cm-2. The effects of pore size, porosity, electrodeposition time, effective current density, and pore aspect ratio are investigated. Nickel nanotube structures are obtained with 1000 nm pore size polycarbonate membrane without any prior treatment method. At the early stages of electrodeposition hollow nickel nanotubes are produced and nanotubes turn into nanowires at longer depositon times. As effective current density accounting for the membrane porosity decreases, the axial …
Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang
Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang
Journal of Electrochemistry
By using a galvaostatic electrodeposition method in the ZnCl2 solution,the highly oriented ZnO nanorod array films have been successfully prepared on ITO substrate after the pretreatment with ZnO nanoparticles.And they were characterized by scanning electron microscope,X-ray diffraction and transmittance spectra.The results indicated that the ZnO nanorod arrays grew along(001) direction with an orientation perpendicular to the substrate.When the wavelength of incident was over 380 nm,the ZnO nanorod arrays showed high optical transmission of above 95%.Furthermore,the band gap became narrower.
A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao
A Study Of Pd-Ir On Nickel Foam Cathode For Aluminum-Hydrogen Peroxide Semi-Fuel Cells, Ding-Wang Zhu, Dan-Dan Chen, Bi-Jin Li, Gui-Ling Wang, Dian-Xue Cao
Journal of Electrochemistry
The Pd-Ir/Ni electrodes were prepared by electrodeposition of Pd and Ir on the porous nickel foam surface.The structure,composition and state of the Pd-Ir catalyst were analyzed using SEM and XPS.The catalytic performance of Pd-Ir/Ni for H2O2 electroveduction at different concentrations of H2O2 were investigated.A limiting current density of 318 mA/cm2 was obtained with 0.4 mol/L H2O2.The aluminum-hydrogen peroxide semi-fuel cells using different aluminum alloys as anode and Pd-Ir/Ni as cathode were assembled and tested.It was found that the fuel cell with aluminum-manganese alloy anode demonstrated a maximum power density of 198mW/cm2 at 234mA/cm2.
Growth Mechanism And Morphology Of Electrodeposited Micro-Nanocrystalline Iron, Qiao-Xin Zhang, Jia-Ming Zhang, Li-Ning Yang
Growth Mechanism And Morphology Of Electrodeposited Micro-Nanocrystalline Iron, Qiao-Xin Zhang, Jia-Ming Zhang, Li-Ning Yang
Journal of Electrochemistry
Effects of current density,reaction temperature,electrolyte concentration and surfactant on the electrochemical deposition of micro-nanocrystalline iron were studied.Morphologies and structures of the samples were characterized by SEM and XRD,the results showed that the electrodeposits is slice α-Fe under little current and the density,lower temperature and higher concentration,and the dentritic α-Fe is under opposite conditions,but the influence from surfactant is unconsicously.Moreover,the growth mechanism of the electrodeposits was also analysed here.
Morphology Of The Pb-Sn Alloy Thin-Layer Electrodeposition, Yan-Jun Du, Zhi-Gang Yin, Tong-Chi Xia
Morphology Of The Pb-Sn Alloy Thin-Layer Electrodeposition, Yan-Jun Du, Zhi-Gang Yin, Tong-Chi Xia
Journal of Electrochemistry
The morphology of Pb-Sn alloy thin-layer electrodeposition was studied.Experimental results showed that the morphology of deposit could vary as the concentration of Pb2+、 Sn2+ two kind metallic ion to be changed.The patterns of product appeared the dendritic,ramification,dense branch,fractal,and homogeneous structure and their morphological evolution was caused by the change in anisotropy of crystal growth and different stage of electrodeposits.
Electrodeposition Of Nano-Sb-Zn Alloy In Acetamide-Urea-Nabr-Kbr Melt, Peng Liu, Xin-Ai Guo, Ye-Xiang Tong, Qi-Qin Yang
Electrodeposition Of Nano-Sb-Zn Alloy In Acetamide-Urea-Nabr-Kbr Melt, Peng Liu, Xin-Ai Guo, Ye-Xiang Tong, Qi-Qin Yang
Journal of Electrochemistry
The electroreduction of Zn(II) and Sb(III) in acetamide-urea-NaBr-KBr(343 K) were studied by cyclic volatmmetry.The reduction of Zn(II) or Sb(III) to the metals is an irreversible process.The transfer coefficient of Zn(II)+2e→Zn and Sb(III) +3e→Sb were calculated to be 0.231 and 0.319,the diffusion coefficient of Zn(II) and Sb(III) in the melt were determined as 1.70 10~(-6) and 3.21 10~(-6) cm~(2)· s~(-1) respectively.The Zn-Sb films with different Zn content from 29.67 at% to 97.34 at% were electrodeposited in acetamide-urea-NaBr-KBr melt at 343 K by controlling the deposition potential and the Zn(II)/Sb(III) molar ratio.The morphology of Zn-Sb film was observed by SEM.Zn-Sb film comprises …
Study On The Microstructure Of Pb-Sn Alloy Obtained From Quasi-Two-Dimensional Electrodeposition, Bin Sun
Study On The Microstructure Of Pb-Sn Alloy Obtained From Quasi-Two-Dimensional Electrodeposition, Bin Sun
Journal of Electrochemistry
A two-layered structure of eutectic-solid sulotion is formed in the microstructure of Pb-Sn alloy obtained from quasi-two-dimensional electrodeposition.It is showed that this unique structure is caused by the variation of the current density on the growth interface.When the interface is located in the front of the whole deposits,the current density is high.So the Pb and Sn can deposit together and the eutectic texture forms.When the interface is in the rear of the whole deposits,the current density is low.At this moment the electrodeposition of Pb is the dominant reaction,and the Pb-based solid solution appears.
Electrodeposition Of Three-Dimensional Porous Copper Films Using Hydrogen Bubbles As Template, Ya-Feng Sun, Zhen-Jiang Niu
Electrodeposition Of Three-Dimensional Porous Copper Films Using Hydrogen Bubbles As Template, Ya-Feng Sun, Zhen-Jiang Niu
Journal of Electrochemistry
Using cathodic hydrogen bubbles as a template,the three-dimensional(3-D) porous copper films have been successfully electrodeposited from a bath of 0.2 mol·dm~(-3) CuSO_(4) and 1.5 mol·dm~(-3) H_(2)SO_(4),effects of deposition parameters including temperature,current density and additives(Na_(2)SO_(4),HCl and Polyethylene glycol(PEG)) on the morphologies of the deposits have been systematically studied.SEM results showed that both the pore size and thickness of the pore walls decreased with cooling the electrolyte temperature or adding(Na_(2)SO_(4)) or PEG into the bath when the other deposition parameters were fixed.With addition small amounts of HCl in the bath,the wall structures of the films could be profoundly changed by refining the …
Copper Electrodeposition Under The Perturbation Of Hard Particles, Zeng-Wei Zhu, Di Zhu
Copper Electrodeposition Under The Perturbation Of Hard Particles, Zeng-Wei Zhu, Di Zhu
Journal of Electrochemistry
Copper electrodepositon was carried out on the rotating cathode,with hard particles(such as ceramic beads) filling between the electrodes.The rotation of cathode led hard particles to polish and impact the surface of deposit during electrodeposition.Copper deposits with a mass of cuspidal nodules were produced in acid sulfate solutions while brittle deposits without nodules were produced in alkaline sulfate solutions.It was also found that brightening and smoothing deposit could be obtained from the alkaline solution,and the deposit was approximatively disordered orientation with granular morphology of about 100~300 nm.The results show that the polishing and impact of hard particles can effectively disturb the …
Development Of Palladium Nanowires, Chuanding Cheng
Development Of Palladium Nanowires, Chuanding Cheng
Doctoral Dissertations
Inherent limitations of traditional lithography have prompted the search for means of achieving self-assembly of nano-scale structures and networks for the next generation of electronic and photonic devices. The nanowire, the basic building block of a nanocircuit, has recently become the focus of intense research. Reports on nanowire synthesis and assembly have appeared in the scientific literature, which include Vapor-Liquid-Solid mechanism, template-based electrochemical fabrication, solvothermal or wet chemistry, and assembly by fluid alignment or microchannel networks. An ideal approach for practical application of nanowires would circumvent technical and economic constraints of templating. Here we report on the self-assembly of highly-ordered …
A Conjugate Dissolution / Deposition Behavior In Thin Layer Electrodeposition, Sun Bin
A Conjugate Dissolution / Deposition Behavior In Thin Layer Electrodeposition, Sun Bin
Journal of Electrochemistry
During the electrodeposition of lead, the dendrite deposit segregates from the cathode due to the disturbance of hydrogen gas. The segregated deposit could move toward the anode spontaneously rather than keep stationary. The studies show that this novel phenomenon was caused by the conjugate electrodissolution and electrodeposition reactions taking place at two ends of the isolated segment of the deposit. The mechanism inducing this phenomenon is suggested.
Nucleation And Crystal Growth Of Pt Electrodeposition On Poly Crystal Au Microdisc Electrode, Zhi-Yong Tao, Pei-Fang Liu
Nucleation And Crystal Growth Of Pt Electrodeposition On Poly Crystal Au Microdisc Electrode, Zhi-Yong Tao, Pei-Fang Liu
Journal of Electrochemistry
Based on the Fleischmann's model of nucleation and crystal growth for electrodeposition combined with the Barradas-Bosco's adsorption-nucleation model for electrochemical phase formation, the chronoamperometry was well fitted for Pt deposition on polycrystalline Au micro disc electrodes (30 μm in diameter) in different H_(2)PtCl_(6) concentrations at different over-potentials. The initial stage of Pt deposition in dilute H_(2)PtCl_(6) could be interpreted by the model of H_(2)PtCl_(6 ) adsorption combined with instantaneous nucleation and two-dimensional cylindrical growth. The rate constant of the two-dimensional growth increased linearly with overpotential. Then the deposit grew layer by layer and the rate constant increased non-linearly with overpotential. …
Electrodeposition Of Copper Into Trenches Under Rotating Hydrodynamic Condition, Jian-Jun Sun
Electrodeposition Of Copper Into Trenches Under Rotating Hydrodynamic Condition, Jian-Jun Sun
Journal of Electrochemistry
Silicon chips patterned with treneches were fixed onto a rotating electrode. Copper was electrodeposited into the trenches under rotating hydrodynamic conditions The sizes of the trenches are 1 m in height and 0.35 m, 0.50 m and 0.70 m in width, respectively. The effects of rotating of the chip, the current density and the concentration of Cu~(2+ )on the filling of thetrenches were studied. It is found that lower current density and moderate concentration of Cu~(2+)resulted in a void free filling of the trenches.
Electrodeposition Nanolaminated Growth Of Zinc, Ying Cao, Tian-Hui Shen, Jing-Yuan Yao, Gui-Fu Ding
Electrodeposition Nanolaminated Growth Of Zinc, Ying Cao, Tian-Hui Shen, Jing-Yuan Yao, Gui-Fu Ding
Journal of Electrochemistry
Nanolaminated growth of the electrodeposition of zinc was studied. The structure and size of crystalline in zinc coatings were investigated by using FEG-TEM and XRD. The corrosion tests of the zinc deposition and the Coatings-Neutral salt spray test were performed, the capability in corrosion resistance of the nanolaminated growth was better than that of others.
Xrd Study On Highly Preferred Orientation Cu Electrodeposit, Min Gu, Fang-Zu Yang, Ling Huang, Shi-Bing Yao, Shao-Min Zhou
Xrd Study On Highly Preferred Orientation Cu Electrodeposit, Min Gu, Fang-Zu Yang, Ling Huang, Shi-Bing Yao, Shao-Min Zhou
Journal of Electrochemistry
Copper electrodeposit was obtained in CuSO 4+H 2SO 4 electrolyte solution by electrodeposition and its structure was studied by XRD.The results showed that copper electoddeposits with the highly preferred orientations of (220)and (111) could be obtained at current density 4.0 A/dm 2 and 15.0 A/dm 2,respectively. The texture coefficient ( TC ) values were increased by thickness of Cu deposits. The thickness would be, to obtain Cu electrodeposit with(111) highly preferred orientation,about 7 times of that of (220) highly preferred orientation, which indicated that(220) face was easier to be remained than (111)face and that electrocrystallization of Cu at low current …
Study On Electrodeposition Of Ingaas Thin Film, Yu Chun Li, Xi Lian Wang, Jing Ke Han, Ai-Zhen Han, Yuan-Kai Gao, Zhi-Wei Yang
Study On Electrodeposition Of Ingaas Thin Film, Yu Chun Li, Xi Lian Wang, Jing Ke Han, Ai-Zhen Han, Yuan-Kai Gao, Zhi-Wei Yang
Journal of Electrochemistry
The principle and the experimental method of the electrodeposition are discribed in detail in this paper.InGaAs thin film was prepared by using optimized electrodeposited conditions. The radiative wave length of the film was between 1.3～1.5 μm, the composition of the film was analyzed by energy spectrometer and the transmission spectrum of the film was measured by spectrophotometer and monochromator. The V I chractristic of the conductive type and the topography of the In x Ga 1 x As film were also studied.
Electrocrystallization Mechanism And Grain Sizes Of Ni-W-B Alloy Eletrodeposits, Fang-Zu Yang, Gang-Min Cao, Xiao Hu, Shu-Kai Xu, Shao-Min Zhou
Electrocrystallization Mechanism And Grain Sizes Of Ni-W-B Alloy Eletrodeposits, Fang-Zu Yang, Gang-Min Cao, Xiao Hu, Shu-Kai Xu, Shao-Min Zhou
Journal of Electrochemistry
The electrodeposition characteristics and grain sizes of Ni_W_B alloy have been studied by cyclic voltammetry, potentiostatic step and X_ray diffraction (XRD). The results showed that Ni_W_B alloy electrodeposit obtained from the solution containing ammonium citrate as a complexing agent was presented in the lower electrochemical activity compared with Ni_W alloy. Based upon the i～t curves of potentiostatic step, it was revealed that electrocrystallization of Ni_W_B alloy on glassy carbon followed the mechanism of instantaneous nucleation and three dimensional growth with diffusion controlled. The crystal nucleus number on the surface of electrode was raised by the increase of overpotential. According to …
The Studies Of The (Photo) Electrochemical Character On The Electrodeposited Silver Indium Selenium Thin Films, Shaoai Xie
Journal of Electrochemistry
A photoelectrochemical cell(PEC) is constructed,using an AgInSe 2 film photoanode made from electrodeposition and a platinium electrode in aqueous polyiodide or polysufide electrolyte. The V oc and I sc of PEC have been tested and measured, and the effect of chemical decoration on the photoanodes also studied.
Electrodeposition Of Neodymium_Iron Group Alloy Films In( P _Ch 3c 6h 4so 3) 3nd+Dmf System, Peng Liu, Yexiang Tong, Qiqin Yang, Yansheng Yang
Electrodeposition Of Neodymium_Iron Group Alloy Films In( P _Ch 3c 6h 4so 3) 3nd+Dmf System, Peng Liu, Yexiang Tong, Qiqin Yang, Yansheng Yang
Journal of Electrochemistry
Neodymium p _toluenesulfonate was prepared and applied to the electrodepositon of neodymium_iron group alloy films. This salt has high solubility in DMF and can be dehydrated easily. Cyclic voltammograms of Pt electrode in ( p _CH 3C 6H 4SO 3) 3Nd+MCl 2(M=Fe,Co,Ni)+DMF indicated that the neodymiun_iron group alloys can be elcetrodeposited from this medium, the Nd_Fe,Nd_Co and Nd_Ni films were obtained by electrolysis at constant potential. The Nd_Fe,Nd_Co and Nd_Ni films are amorphous in which the rare earth contents are in the range of 15 at%～60 at% as analyzed by XRD and EDS. The Nd content in the deposited film …
The Electrochemical Behavior And Deposited Mechanism Of Zn Ni Alloy Codeposition, Jixun Wu, Yongqin Liu, Huimin Meng
The Electrochemical Behavior And Deposited Mechanism Of Zn Ni Alloy Codeposition, Jixun Wu, Yongqin Liu, Huimin Meng
Journal of Electrochemistry
The electrochemical behavior of Zn Ni alloy codeposition and concomitant hydrogen evolution have been studied in the chloride ammonia solution through the d c electroplating method. Under the condition of the applied cathodic current density of 2A/dm 2 , the AC impedance spectra have been measured. An equivalent circuit has been presented for the impedance study on the alloy codeposition.
Behavior Of Copper In Hydrogen Storage Alloy Microencapsulated By Copper, Dawei Zhang, Huatang Yuan, Huabin Yang, Zuoxiang Zhou, Yunshi Zhang
Behavior Of Copper In Hydrogen Storage Alloy Microencapsulated By Copper, Dawei Zhang, Huatang Yuan, Huabin Yang, Zuoxiang Zhou, Yunshi Zhang
Journal of Electrochemistry
Negative electrode made from Cu microencapsulated hydrogen storage alloy was studied by using cyclic voltammetry method. The results showed that copper as a coating material was of a certain stability in 5 mol/L KOH solution within the range of charge and discharge voltage. But when expanding the sweep voltage, the CV curve showed a pair of distinct oxidation reduction current peaks of Cu 2O formation at E =-0.3 V and Cu 2O reduction at E =-0.6 V. With charging discharging cycles, copper is liable to be oxidized to Cu 2O and further oxidized into CuO 2- 2. When charged again, …