Engineering Commons^™

Selective Resistive Sintering: A Novel Additive Manufacturing Process, Austin Bryan Van Horn

Graduate Theses and Dissertations

Selective laser sintering (SLS) is one of the most popular 3D printing methods that uses a laser to pattern energy and selectively sinter powder particles to build 3D geometries. However, this printing method is plagued by slow printing speeds, high power consumption, difficulty to scale, and high overhead expense. In this research, a new 3D printing method is proposed to overcome these limitations of SLS. Instead of using a laser to pattern energy, this new method, termed selective resistive sintering (SRS), uses an array of microheaters to pattern heat for selectively sintering materials. Using microheaters offers significant power savings, significantly …

Solar Car Suspension System, Alex Power, Adam O'Camb

Mechanical Engineering

No abstract provided.

Revolutionized Additive Manufacturing, Matthew Walker, Winthrop Townsend, Luca Fuller

Mechanical Engineering

No abstract provided.

The Effect Of Process Parameters And Surface Condition On Bond Strength Between Additively Manufactured Components And Polymer Substrates, Bharat Bhushan Chivukula

Graduate Theses and Dissertations

Additive patching is a process in which printers with multiple axes deposit molten material onto a pre-defined surface to form a bond. Studying the effect of surface roughness and process parameters selected for printing auxiliary part on the bond helps in improving the strength of the final component. Particularly, the influence of surface roughness, as established by adhesion theory, has not been evaluated in the framework of additive manufacturing (AM). A full factorial design of experiments with five replications was conducted on two levels and three factors, viz., layer thickness, surface roughness, and raster angle to examine the underlying effects …

Study Of Selective Laser Remelting Of 316l S.S. To Reduce Roughness On Inclined Surface, Jafar Ghorbani

Theses and Dissertations

Additive manufacturing (AM) technologies are increasingly competing with subtractive methods, and there are promising applications for additive technologies that are hybrid with traditional manufacturing methods. Poor surface roughness of additive manufactured parts continues to be a major challenge especially for advanced functional parts. In this study, effect of processing parameters are evaluated, optimized and verified by using the Box–Behnken design of experiment method. The results, for the first time, reveal that surface remelting has the potential to become a high speed approach for improving the roughness of non-horizontal surface of additive manufactured parts.

Fiber Glass Mat Splice Automation, Max Weinstein, Charles Scott Forbes, Max Kilpatrick

Mechanical Engineering

Currently, GAF has two operators manually splice together each roll of fiberglass mat. To save money and resources, GAF wants to automate this splicing process. Our team is responsible for stage 3 of 5 in this automation process. We are responsible for ensuring that the system is able to move autonomously to the necessary positions required for splicing together the rolls of fiberglass mat. We have determined the best solution for accomplishing this movement is to use linear slide actuators. This document will describe the process by which we arrived at our solution, the details of our solution, and a …

Automated Machine Tender, Ryan A. Canfield, Samuel N. Adler, Louis S. Roseguo

Mechanical Engineering

The use of CNC (Computerized Numerical Control) machines automate production in factories through programs controlling manual operations such as milling or lathing. The manufacturing process can be automated beyond the use of CNC machines through the addition of a robotic tender capable of carrying out the same tasks as a human operator. A tender can be integrated into the CNC machine itself, or purchased separately and configured to autonomously operate a particular machine. Smaller companies making limited production runs may not find it economically feasible to purchase large scale integrated machine tenders, but would benefit from a versatile autonomous machine …

Compression Molded Composite Component, Greg Hermansen, Larsson Johnson, Joanne Medrano, Kyle Hammell

Mechanical Engineering

The following final design report outlines the design and fabrication of a carbon fiber compression molded sunglasses case. It intends to guide the development of a future lab activity for a composites undergraduate course at Cal Poly – San Luis Obispo. The activity aims to support an educational investigation in "out-of-autoclave" composites manufacturing methods, such as compression molding, which offer some key benefits over autoclave molding. The methodology behind the creation of a conceptual design, an initial prototype, and a final product is laid out in detail below.

Final Design Report: Allergen Mixing Assistant (Ama) Micro-Refrigeration Redesigning, Mitchell Parks, Minwoo (Michael) Suh

Mechanical Engineering

Abstract

Allergen Mixing Assistant (AMA) by Xtract Solutions is a device designed to more “effectively refrigerate, organize, and mix allergenic extracts”. Although Xtract Solutions intended the product to be fully automated, the company has decided against its automation and declared its current design as a minimum viable product whose components are too expensive, difficult to source and complex. Therefore, Cal Poly AMA design team - Mitchell Parks and Minwoo Suh - has decided to replace these expensive components with much more economical alternatives as shown below:

Stirling cooler

→

Thermoelectric (Peltier) cooler

Custom Arduino

Controller Card

→

TEC Thermostat *** …

Final Design Report: Polymer Fatigue Characterization Test Method, Wyatt Ayling, Tyler Price, Brandon Stell, Michela Upson

Mechanical Engineering

Polylogix is a team dedicated to the design, build, and testing of a fatigue machine to simulate cyclic loading on a biomedical polymer. This project is sponsored by Endologix, Inc. to provide test data characterizing mechanical material properties of various formulations of polymer used in abdominal aortic aneurysm surgeries. With this project goal, the machine must be able to test the polymer at body conditions; these include a testing temperature of 37°C and a cycling frequency ranging from 1 Hz to 10 Hz. This report proposes the following solution to this design challenge: an AC motor-driven mechanism utilizing a planetary …

Cold Gas Dynamic Spray – Characterization Of Polymeric Deposition, Trenton Bush

Masters Theses

When a solid, ductile particle impacts a substrate at sufficient velocity, the resulting heat, pressure, and plastic deformation can produce bonding at the interface. The use of a supersonic gas flow to accelerate such particles is known as Cold Spray deposition. The Cold Spray process has been commercialized for some metallic materials, but further research is required to unlock the exciting material properties possible with polymeric compounds. In this work, a combined computational and experimental study a) simulated and optimized the nozzle flow conditions necessary to produce bonding in a polyethylene particle, b) developed and fabricated an experimental device, and …

Fabrication Of Large Mechanically Flexible Multi-Layered Pdms Optical Devices, Robert S. Green

Electronic Thesis and Dissertation Repository

Mechanically flexible large area polydimethylsiloxane (PDMS) optical devices are fabricated using soft-lithography techniques based on replica moulding. These non-rigid optical devices can be designed as sheets to act as either light concentrators (collectors) or diffusers (illuminators) based on the position and geometry of micro-optical structures (MOSs) embedded within the sheet or imprinted on its surface. The active surface area of the device can range from less than a sq. cm to several sq. m. The performance of the large area optical device is a function of the location and geometry of micro-optical structures, thickness and shape of the flexible waveguide, …

Parametric Design, Modeling, And Optical Evaluation Of Retroreflective Prismatic Structures, Sama Hussein

Electronic Thesis and Dissertation Repository

Retroreflectors (RR) are defined as passive optical structures that redirect incident light to its originating source. Specific types of retroreflectors called inverted cubes (ICs) function through total internal reflection (TIR) and are used in various applications such as measurement tools, traffic signs and automotive rear and side lighting. This thesis aims to model, analyze, fabricate and study a novel type of IC retroreflectors called right triangular prism (RTP). A parametric approach is used to model existing IC geometries from a generic unit cube and is then implemented to model the novel RTP geometry. Those elements are then tested by optical …

Ultraprecise Single Point Inverted Cutting Strategies For Multi-Axis Fabrication Of Right Triangular Prismatic Retroreflectors, Benjamin W. Hamilton

Electronic Thesis and Dissertation Repository

The optical phenomenon of retroreflection (RR) is described as light rays contacting a surface and being redirected back to their originating source. While applications are many and varied, their primary focus is safety in low-light conditions, and the focus of this research is toward automotive applications. Few geometric shapes are capable of retroreflection. Among them are the lens-and-mirror, and cube corner geometry; however, the right triangular prism (RTP) has been introduced as a viable alternative. This study demonstrates a more efficient fabrication technology when compared to current industry practices.

The ultraprecise single point inverted cutting (USPIC) technology was envisioned as …

Determining The Print Accuracy Of Four Three-Dimensional Printers, Kshiteej Dalal

Master of Technology Management Plan II Graduate Projects

Rapid prototyping [RP] or 3D printing [3DP] have existed for some time now. One of the major deficiencies of 3DP is the accuracy of the printed three dimensional parts. Even beyond that is the lack of studies that have been designed to measure the 3DP components. Measuring, verifying and determining the accuracy of 3DP parts is the focus of this study. As the accuracy is measured and approaches those of CNC machined parts, it will drive the development of additional additive manufacturing [AM] machinery. In this project a component is created in a solid modeling package. A solid model of …

Design For Manufacturability: Off-Road Toyota Bumper, Drew Donlon

Industrial and Manufacturing Engineering

The purpose of this project is to design a new off-road bumper that is improved from the stock form of a 1996-2002 Toyota 4Runner and a 1996-2004 Toyota Tacoma. The current state of the component is too weak to endure to off-road endeavors, and a kit bumper market is virtually untapped for these vehicles. The objectives of this project were met by redesigning the stock front bumper, conducting a finite element analysis on the model to test for strength, prototyping the bumper with CNC cut cardboard, and conducting a full cost analysis including the costs for waterjet and laser cutting …

El Capitán: Cal Poly Rose Float Digital Drive System, Gregory Raffi Baghdikian

Computer Engineering

In today’s world of smartphones, self-driving cars, and internet-connected coffee makers, it seems as if computers are contained in everything around us. These “embedded systems” have become critical components of our lives, improving everything about the things they control, from cost, to speed, to simplicity. One area that embedded systems has hardly gained a foothold is in the world of floatbuilding. Most of the floats in the Tournament of Roses Parade, including the one built jointly by Cal Poly San Luis Obispo and Cal Poly Pomona, are technologically very simple, using mostly analog components and rudimentary discrete digital logic to …

Design & Analysis Of A Bicycle Towing Device, Austin Lynch, William Max Mcewan, Fredrik Stenson

Industrial and Manufacturing Engineering

A local businessman had the idea to build a device that allows a bicycle to tow another bicycle. He built a prototype to demonstrate his idea but he wanted help in developing a product that could fit more bikes, did not require a rear rack to operate, and be manufacturable at his facility. He also expressed interest in an economic evaluation of production and marketing of the device. An analysis of customer needs led to adding reduction of weight and ease of attachment to the design requirements.

This report is about improving the original design and presents the process of …

Mentoring Management Database, Alexandra Cava, Samantha Kin

Industrial and Manufacturing Engineering

A new mentoring program is set to begin next year pairing children from Kindergarten through 12th grade with college students as their mentors. Keeping track of the mentor information, mentee information, pairings, stipend disbursements, interview question results, events, and final assessments by hand would be extremely difficult, therefore, a database would be a great asset to the program.

Creating a database in Microsoft Access allows a user to have all this information in one convenient location, therefore, ensuring there is a good user interface is a key component to this project. Using Perach’s "Guide to the Perplexed" as the base …

Zero Waste Campus Dining, Jenny Caudillo, Sarah Dahel, Youlen Ghazalian

Industrial and Manufacturing Engineering

Cal Poly Campus Dining has a goal of becoming a zero waste entity by providing their customers with alternative methods of disposing their trash. Their current operations produce waste, specifically their methods of packaging the food. Campus dining plans to be more sustainable by providing their customers with reusable containers. The objective of this implementation is to reduce waste produced from one-time use, disposable food containers. The success criteria for the desired system is based around the ability to track and measure the reusable containers to prevent further waste, while providing the user an accommodating environment to ensure they will …

Building A Startup Wine Brand, Sean Christopher Silvestre

Industrial and Manufacturing Engineering

Lisso Wine is a company that currently purchases wine from a California winemaker and resells it in China. In order to reach more customers and increase sales, Lisso wants to create their own brand of wine while keeping the winemaker as a supplier. However, they do not have a plan for the marketing, production, or distribution of their new product. This project will be treated as a startup venture by Lisso Wine and designed to be operated by a handful of people with limited resources. Sustainable and cost-effective materials were selected for the product and it’s packaging in order to …

Ymca Operations Manual Development, Devlin Stewart

Industrial and Manufacturing Engineering

The San Luis Obispo YMCA sports department was losing money and overworking their employees due to lack of processes and organizational issues. To address this, a plan was made with the sports director to begin organizing the sports department. This would be done by creating an operations manual for them to organize and consolidate all of their relevant information.

The project was scoped to develop a plan for the YMCA to implement an operations manual. By delivering a work breakdown structure, a gantt chart, and a plan for continuous improvement, the YMCA could use these tools to develop their operations …

Soto's True Earth Market Optimization, Hironari Fujita, Wei Lin Luong, Sean Macwilliams

Industrial and Manufacturing Engineering

Soto’s True Earth Market is a new organic market startup which is located in a historical facility in the small town of Cambria. The new owner of Soto’s Andre Ponce has a vision to create a community revolved around local organic foods and sustainability. Since Soto’s is still in the initial startup phase there is a large amount of room for optimization and redesign in order to create a solid customer foundation. Andre presented several opportunities for improvement to the team. With a time constraint of solely two quarters the project team decided to provide the following:

● Old and …

E-Learning Design For Microsoft Access & Asp.Net, Jonathan Choi, Christopher Hom

Industrial and Manufacturing Engineering

The problem definition is that the current video tutorial series is outdated and lacks interactive features that aid with E-Learning. The goal of the project is to create a platform that incorporates features such as structure, interaction, assessments, and competency tests. The project revolved around integrating four softwares together in order to create an effective E-Learning platform. The four softwares were Adobe Captivate, Camtasia, Microsoft Access and Microsoft Visual Studios. Adobe Captive is used to store the tutorial video and assign quizzes. Camtasia is used to record the tutorial videos. Microsoft Access is used to store all the questions given …

Improving The Mechanical Performance Of 3d Printed Parts Using Fused Filament Fabrication, Inderpreet Binning

Industrial and Manufacturing Engineering

The 3D printing industry has seen rapid growth in the last 10 years and has been called the next industrial revolution. There are several different processes used in 3D printing, but the most popular process is called Fused Filament Fabrication (FFF) or Fused Deposition Modeling (FDM). This is the process where (most commonly) plastic filament enters a nozzle, is heated to a semi-liquid state, and then deposited into a pattern to create a print. One major drawback to this process is that the prints are anisotropic. This means that the strength of the print varies with the orientation that it …

Facility Redesign For Increased Throughput And Improved Product Flow Of Shark Rack Products Final Assembly At Paris Precision, Karina Hromyak, Julia Remnant

Industrial and Manufacturing Engineering

Paris Precision is a metal fabrication company that fabricates metal components for various companies, one of which is Shark Rack, which creates high end server racks. Shark Rack has plans for a dramatic increase in demand over the next two years. Paris Precision’s Final Assembly area is currently not conducive to produce such a large increase in demand. A redesign of the Final Assembly facility is needed to handle the increase in production and to improve product flow through the space. The project team’s objectives are to:

● Study current Final Assembly production process

● Analyze the production flow

● …

National Society Of Sales Engineers & National Sales Engineering Competition, Joseph Lynes, Tyler Sasse

Industrial and Manufacturing Engineering

Sales Engineering is a popular career choice for many engineers coming out of university. Despite its continuing growth, many students lack the knowledge and preparation to be successful in the early years of their career. A small collection of sales engineering minors and student clubs are the only option for students interested in technical sales.

Using the DMAIC process, the senior project team went step by step to find and implement the best possible solution to better connect college students and the professional sales engineering industry . The team worked side by side with professionals in the industry and students …

Smart Packing With Qr - Improving Cal Poly's Parking System For All Users, Kelsey Bazshushtari, Andrew Lee, Christopher Ragasa

Industrial and Manufacturing Engineering

Cal Poly Smart Parking, herein referred to as CPSP QR Code Initiative, is developed to reduce the wait times student, staff, and guest drivers experience when searching for a parking spot on campus. Cal Poly is currently undergoing a large growth in student population, and, as a result, is experiencing congestion in parking lots. Drivers will commonly spend frustrating amounts of time "vulturing" these parking lots for an open spot. CPSP QR Code Initiative consists of a database that is controlled by user submitted data through QR codes scanned on a user’s smartphone. This system will provide drivers with a …

Gold Contamination In Non-Lead Surface Mount Solder Joints, Richard Alexander Garrison

Industrial and Manufacturing Engineering

Abstract

Solder joints are critical to the reliability of circuit boards. If gold is introduced to the solder joint, brittle AuSn4 intermetallic compounds develop which affect reliability of that solder joint. To determine the effects of gold when dissolved into a non-lead solder joint, a process was developed in order to apply gold content onto SAC305 solder paste. The gold was transferred as a paste from a micropipette onto each individual solder bump. This process was designed to apply a range of gold content from 1.0 wt. % to 10 wt. % to each individual solder joint. The test board …

Inventory Tracking Software Improvement Project, Jacky Leung

Industrial and Manufacturing Engineering

FanimeCon’s Convention Operations department required standardized processes and controls for their inventory tracking software. On top of the current web application, new controls were put into place for checkout limitations. To allow for a continuous improvement effort, processes became standardized with a new graphical user interface where user input is recorded. These will provide processing times for further study in proposing redesigned layouts and more efficient processes.