Engineering Commons^™

Development Of Metaheuristic Algorithms For The Efficient Allocation Of Power Flow Control Devices, Eduardo Jose Castillo Fatule

Open Access Theses & Dissertations

No abstract provided.

Use Of Digital Twins To Mitigate Communication Failures In Microgrids, Andrew Eggebeen

Theses and Dissertations

This work investigates digital twin (DT) applications for electric power system (EPS) resilience. A novel DT architecture is proposed consisting of a physical twin, a virtual twin, an intelligent agent, and data communications. Requirements for the virtual twin are identified. Guidelines are provided for generating, capturing, and storing data to train the intelligent agent. The relationship between the DT development process and an existing controller hardware-in-the-loop (CHIL) process is discussed. To demonstrate the proposed DT architecture and development process, a DT for a battery energy storage system (BESS) is created based on the simulation of an industrial nanogrid. The creation …

A Design Strategy To Improve Machine Learning Resiliency Of Physically Unclonable Functions Using Modulus Process, Yuqiu Jiang

Theses and Dissertations

Physically unclonable functions (PUFs) are hardware security primitives that utilize non-reproducible manufacturing variations to provide device-specific challenge-response pairs (CRPs). Such primitives are desirable for applications such as communication and intellectual property protection. PUFs have been gaining considerable interest from both the academic and industrial communities because of their simplicity and stability. However, many recent studies have exposed PUFs to machine-learning (ML) modeling attacks. To improve the resilience of a system to general ML attacks instead of a specific ML technique, a common solution is to improve the complexity of the system. Structures, such as XOR-PUFs, can significantly increase the nonlinearity …

Cyber-Threat Detection Strategies Governed By An Observer And A Neural-Network For An Autonomous Electric Vehicle, Douglas Scruggs

All Theses

A pathway to prevalence for autonomous electrified transportation is reliant upon accurate and reliable information in the vehicle’s sensor data. This thesis provides insight as to the effective cyber-attack placements on an autonomous electric vehicle’s lateral stability control system (LSCS). Here, Data Integrity Attacks, Replay Attacks, and Denial-of-Service attacks are placed on the sensor data describing the vehicle’s actual yaw-rate and sideslip angle. In this study, there are three different forms of detection methods. These detection methods utilize a residual metric that incorporate sensor data, a state-space observer, and a Neural-Network. The vehicle at hand is a four-motor drive autonomous …

Hybrid Wall Outlet For Ac Or Dc Power Delivery, Garrett Knoller, Kerr Allan, Greg Perini

Electrical Engineering

The goal of this project is to develop hybrid DC and AC wall outlets for an efficient, flexible power interface. A DC plug standard is also proposed to allow DC devices to be safely powered by the outlet with the correct DC voltage for each device. The primary objective is to create a power outlet compatible with the proposed DC plug as well as NEMA 5-15 AC plugs, enabling the same outlet to power both types of load as needed. The outlet is intended for buildings and systems transitioning to an isolated DC grid to encourage DC development and adoption. …

A Case Study In Cmos Design Scaling For Analog Applications: The Ringamp Ldo, Steven Corum

Masters Theses

As CMOS process nodes scale to smaller feature sizes, process optimizations are made to achieve improvements in digital circuit performance, such as increasing speed and memory, while decreasing power consumption. Unfortunately for analog design, these optimizations usually come at the expense of poorer transistor performance, such as reduced small signal output resistance and increased channel length modulation. The ring amplifier has been proposed as a digital solution to the analog scaling problem, by configuring digital inverters to function as analog amplifiers through deadzone biasing. As digital inverters naturally scale, the ring amplifier is a promising area of exploration for analog …

Ism-Band Energy Harvesting Wireless Sensor Node, Fnu Naveed

Graduate Theses and Dissertations

In recent years, the interest in remote wireless sensor networks has grown significantly, particularly with the rapid advancements in Internet of Things (IoT) technology. These networks find diverse applications, from inventory tracking to environmental monitoring. In remote areas where grid access is unavailable, wireless sensors are commonly powered by batteries, which imposes a constraint on their lifespan. However, with the emergence of wireless energy harvesting technologies, there is a transformative potential in addressing the power challenges faced by these sensors. By harnessing energy from the surrounding environment, such as solar, thermal, vibrational, or RF sources, these sensors can potentially operate …

Diverse Impacts Of Commercial Ev Charging Load Infrastructure On Electric Power Grid, Antonio Avila

Open Access Theses & Dissertations

With the rising prominence of electric vehicles (EVs) in the transportation sector, this thesis delves into the critical nexus between commercial EVs, charging infrastructure, and their consequential impacts on the power grid. As commercial EVs, particularly medium and heavy-duty variants, gain traction as viable alternatives in the commercial transportation landscape, understanding the intricacies of their charging requirements becomes paramount. This thesis critically examines the technological and logistical dimensions of the charging infrastructure for supporting commercial EVs, evaluating the consequential implications on the power grid and proposing strategies for mitigation through the utilization of Distributed Energy Resources (DERs). In tandem with …

Towards A Spaceworthy Cots Graphics Processing Unit: Hardware Performance Counter Based Symptomatic Fault Detection, Antonio E. Teijeiro

Open Access Theses & Dissertations

Ionizing radiation remains an obstacle to bringing graphics processing units (GPU) to space. Since radiation-hardened GPU chips are technically infeasible at the moment, an emphasis has been placed on the adaptation of commercial-off-the-shelf (COTS) GPUs to the space domain. At present, GPU error detection methods require redundant computation. This thesis work explores the utilization of hardware performance counters, special registers useful for monitoring internal GPU hardware events, for symptom-based, lightweight error detection. Hardware performance counters are successfully utilized for the detection of anomalous single event upsets in the L0 instruction cache, the load store unit, the arithmetic and logic unit, …

Low-Power, Event-Driven System On A Chip For Charge Pulse Processing Applications, Joseph A. Schmitz

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents an electronic architecture and methodology capable of processing charge pulses generated by a range of sensors, including radiation detectors and tactile synthetic skin. These sensors output a charge signal proportional to the input stimulus, which is processed electronically in both the analog and digital domains. The presented work implements this functionality using an event-driven methodology, which greatly reduces power consumption compared to standard implementations. This enables new application areas that require a long operating time or compact physical dimensions, which would not otherwise be possible. The architecture is designed, fabricated, and tested in the aforementioned applications to …

Investigating Mems Devices In Flow Conditions Relevant To Flow-Through Systems., Mohammad Shafquatul Islam

Electronic Theses and Dissertations

Advancements in microscale actuating technologies has substantially expanded the possibilities of interacting with the surrounding environment. Microstructures that deflect in response to mechanical forces are one of the largest application areas of microelectromechanical systems (MEMS). MEMS devices, functioning as sensors, actuators, and support structures, find applications in inertial sensors, pressure sensors, chemical sensors, and robotics, among others. Driven by the critical role of catalytic membrane reactors, this dissertation aims to evaluate enzyme activity on polymeric membranes and explore how fabrication methods from the field of Electrical and Computer Engineering (ECE) can incorporate sensing and actuation into these porous surfaces. Toward …

A Modular Framework For Surface-Embedded Actuation And Optical Sensing In Soft Robots., Paul Bupe Jr

Electronic Theses and Dissertations

This dissertation explores the development and integration of modular technologies in soft robotics, with a focus on the OptiGap sensor system. OptiGap serves as a simple, flexible, cost-effective solution for real-time sensing of bending and deformation, validated through simulation and experimentation. Working as part of an emerging category of soft robotics called Soft, Curved, Reconfigurable, Anisotropic Mechanisms, or SCRAMs, this research also introduces the Thermally-Activated SCRAM Limb (TASL) technology, which employs shape-memory alloy (SMA) wire embedded in curved sheets for surface actuation and served as the initial inspiration for OptiGap. In addition, the EneGate system is presented as a complementary …

Gpu Based Monte Carlo Estimation Of Eddy Current Losses In Electromagnetic Coil-Core System, Adwaith Ravichandran

Theses and Dissertations

A novel parallelizable probabilistic approach to model eddy currents in AC electromagnets is presented in this research. Consequently, power loss associated with the formation of these eddy currents is estimated and validated using experimental data. Furthermore, predicting the effect of ferromagnetic alternating field enhancement on power loss in the source excitation winding has been an active area of research. Unlike a stationary field, an alternating sinusoidal field diffuses partially into the ferromagnetic material leading to a predictably sub-optimal field enhancement. To model these physics, finite element techniques employ nonlinear iterative solvers which are time consuming. A novel method is developed …

Project Thetis: A Low-Cost, Low-Profile Inertial Data Logger, Braidan Duffy

Theses and Dissertations

This thesis details the design, testing, calibration, and verification of a nine degree of freedom inertial measurement data logger for use with floating bodies. The instrument was conceived to address limitations of equipment used in classes within the Ocean Engineering department at Florida Institute of Technology. By meeting with several stakeholders and end users, a series of stakeholder requirements, capabilities, and component-level requirements were de- veloped that informed the design constraints. There were several hardware iterations of the board, culminating in Revision F5 which was extensively tested and proven. The design was inspected after testing concluded to determine which capabilities …

Refinement And Performance Analysis Of The Stepped Frequency Microwave Radiometer In Extra Tropical Cyclone Conditions, Jezabel Vilardell Sanchez

Doctoral Dissertations

The Stepped Frequency Microwave Radiometer (SFMR) is a key instrument for estimation of ocean surface wind speed and rain rate in tropical and extra-tropical cyclones research. Through the observed brightness temperature (TB) over a range of six C-band frequencies, the SFMR derives these key parameters used by hurricane specialists to issue watches and warnings. The information gathered with this instru- ment is also pivotal for post-storm studies and satellite calibrations. Currently, the SFMR requires an average time of 5-10 seconds of averaging to cycle through the six di↵erent frequency channels, so in regions with strong wind/rain gradients such as the …

Models Of Physical-Technical Effects In The Processes Of Changing Three-Phase Asymmetrical Currents Into A Signal In The Appearance Of Secondary Voltage, Timur Urunbayevich Kurbaniyazov

Chemical Technology, Control and Management

This article presents research models, physical processes and mathematical expressions of the processes, quantities and parameters in the elements and structures of three-phase electromagnetic current transformers used in measurement and control systems of asymmetrical three-phase reactive power of power supply systems.

Analysis Of The Pros And Cons Of The Acquisition Of Training Ships By Metis, Jeremiah Yaw Frimpong

World Maritime University Dissertations

No abstract provided.

Furthering Development Of Smart Fabrics To Improve The Accessibility Of Music Therapy, Ellie Nguyen, Daisy Z. Fernandez-Reyes, Franceli L. Cibrian

Engineering Faculty Articles and Research

In this paper, we present the design and development of HarmonicThreads, a smart, cost-effective fabric augmented by generative machine learning algorithms to create music in real time according to the user's interaction. In this manner, we hypothesize that individuals with sensory differences could take advantage of the fabric's flexibility, the music will adapt according to users' interaction, and the affordable hardware we propose will make it more accessible. We follow a design thinking methodology using data from a multidisciplinary team in Mexico and the United States. Then we will close this paper by discussing challenges in developing accessible smart fabrics …

Chip- And System-Level Reliability On Sic-Based Power Modules, Pengyu Lai

Graduate Theses and Dissertations

The blocking voltage, switching frequency and temperature tolerance of power devices have been greatly improved due to the revolution of wide bandgap (WBG) materials, such as silicon carbide (SiC) and gallium nitride (GaN). Owing to the development of SiC-based power devices, the power rating, operating voltage, and power density of power modules have been significantly improved. However, the reliability of SiC-based power modules has not been fully explored yet. Thus, this dissertation focuses on the chip- and system-level reliability on SiC-based power modules. For chip-level reliability, this work focuses on on-chip SiC ESD protection devices for SiC-based integrated circuits (ICs). …

Mathematical Model Of An Industrial Robot Built On The Basis Of Linear Motion Mechatron Modules, Matyokubov Nurbek Rustamovich, Rakhimov Temurbek Omonboyevich

Chemical Technology, Control and Management

The use of Industry 4.0 technologies in modern production serves to increase production efficiency. Robots and robotic complexes with innovative intelligent control are widely used in industrial production. However, studying their mechanical part, linear motion mechatronic modules and control system is a complex object. The variety and complexity of control methods and operating modes negatively affects the operator's working time and production productivity. In such cases, it is necessary to improve control methods and develop technologies used in industry, including robots and robotic manipulators, which allow to perform short movements with high accuracy and speed. In the article, the mathematical …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

Electromagnetic Current Transducer For Control Of Reactive Power Consumption Of An Asynchronous Motor From A Single-Phase Supply Of Renewable Energy Source, Llhomjon Xakimovich Siddikov, Saidikrom Saidmurodovich A'Zamov, Dilyorbek Doniyorbek O'G'Li Karimjonov

Chemical Technology, Control and Management

In the world, the demand for electricity and its quality is increasing, in order to further increase the share of renewable energy sources, the reactive power that generates the magnetic field and current in asynchronous motors, which consumes more than 60% of the electricity generated from them and provided by them The research of electromagnetic current transformers, which allows controlling the consumption, evaluating the asymmetry and nonsinusoidal indicators of reactive power and energy, remotely sensing and measuring these quantities with appropriate devices, and converting them into a standard signal, is considered an urgent issue . The research results of the …

Distributed Optimization With Limited Communication In Networks With Adversaries, Iyanuoluwa Emiola

Electronic Theses and Dissertations, 2020-

We all hope for the best but sometimes, one must plan for ways of dealing with the worst-case scenarios, especially in a network with adversaries. This dissertation illustrates a detailed description of distributed optimization algorithms over a network of agents, in which some agents are adversarial. The model considered is such that adversarial agents act to subvert the objective of the network. The algorithms presented in this dissertation are solved via gradient-based distributed optimization algorithm and the effects of the adversarial agents on the convergence of the algorithm to the optimal solution are characterized. The analyses presented establish conditions under …

Optimized Beam-Forming For Massive Mimo- Ofdm System, Nelly M. Shafik, Hazem H. El-Banna

Mansoura Engineering Journal

Massive Multiple-Input Multiple-Output (MIMO) wireless communication systems, achieved by large number of antennas, is the main secrete of Fifth Generation (5G) wireless communication networks powerful. In this paper, novel active antennas selection algorithm is proposed with resulted in efficient system performance with only half number of antenna elements. In order to gain optimum performance of massive MIMO wireless communication systems, it is vital to well analyze channel models which is glory indication for massive MIMO system characteristics. In this paper, MIMO system is simulated in bad frequency selective fading channel which is considered the most matching channel in case of …

Inkjet-Printed Electrochemical Sensors For Lead Detection, Annatoma Arif

Open Access Theses & Dissertations

This PhD dissertation research has developed a simple, miniaturized, sensitive, selective, reproducible, and disposable 3D (inkjet printed – additive manufacturing technology) gold (Au) plated electrochemical sensor (ECS) on shape memory polymer (SMP) for aqueous lead detection. This technology has shown promising performance in the application of electrochemical sensing (lead (II) detection) due to increased effective electrode surface area (7.25 mm^2 ± 0.15 mm^2) despite miniaturizing lateral surface area (4.19 mm^2). The design, fabrication processes, optimization including bismuth functionalization, evaluation, uncertainty analysis, and cost analysis of the novel SMP based inkjet printed Au plated sensor have been delineated in this manuscript …

Metal Additive Microfabrication Of Semiconductor Packages With Inbuilt Thermal Management System, Bhushan Lohani

Open Access Theses & Dissertations

Moore’s law describes the development capabilities in electronics manufacturing. Although his estimation held for decades, at present, the doubling of components every two years seems to be approaching a halt. The assessment was based on the miniaturization of transistors to create space for more. Miniaturization led to higher component density, decreased cost, lowered power consumption, and compactness. However, it also came with high current density, increased Joule heating, and reduced critical charge. One of the limiting factors is the heat generated from such devices, which is heavily discussed in International Roadmap for Devices and Systems (IRDS) and International Technology Roadmap …

Characterization, Simulation, And Test Method For Image Artifacts Due To Phase Drift Of The Saw Filter In The Magnetic Resonance Receiver, Gabriel T. Jacobs

Theses and Dissertations

The receiver for a Magnetic Resonance (MR) scanner is responsible for capturing the precise frequency and phase of extremely low-power RF signals emanating from the human body; and consequentially must minimize unexpected phase drift in the received signal. One well-known source for temperature-dependent phase drift in RF electronics is the Surface Acoustic Wave (SAW) filter. In this work, the phase drift due to temperature changes in the SAW filter of an MR receiver was evaluated for its potential effects on image quality using several image quality metrics. A lab bench method was developed to playback MR images using typical lab-equipment …

Ultra Fast Dc Switch, Ian A. Buck

Theses and Dissertations

With advancements in power electronics, DC power systems are a strong contender forfuture power system and shipboard application studies. However, to ensure proper DC power systems, protection engineers must develop different DC protection schemes to maintain proper system protection levels. The critical issue behind developing DC protection devices is that the signal never crosses zero naturally, as in AC circuit breakers and AC disconnect switches. There is also a necessity for galvanic isolation in the DC protection system. A method developed is pairing a mechanical commercial-off-the-shelf vacuum interrupter, a Thomson coil actuator, and a current commutating drive circuit (CCDC). The …

Virtual Prototyping Of Pebb Based Power Electronics System For Ground Vehicles, Yi Li

All Theses

Power electronics are heavily involved in power and energy systems in plenty of applications nowadays. The increase of demand brings more challenges into simulations for development. Considering the complexity of the systems and high frequency operational conditions, this paper presents comprehensive research on modeling, simulating, and validation on ground vehicle propulsion system applications.

To reduce the computational burden, the Power Electronics Building Blocks concept is utilized to simplify the structure of modeling under different conversion scenarios in ground vehicle systems. In addition, the Average and Switching versions models are included. To speedup the simulation, the engagement of advanced computing technique …

Investigation Of Vo2 Thin Films And Devices For Opto-Electromechanical Applications, Samee Azad

All Dissertations

Specialized and optimized low pressure direct oxidation technique have been implemented to synthesize high quality VO₂ thin films on various substrates (sapphire, SiO₂/Si, AT-cut quartz, GaN/AlGaN/GaN/Si and muscovite). Structural and surface characterization methods such as X-ray diffraction, Raman spectroscopy and atomic force microscopy have been administered on the grown VO₂ films which indicate their material quality. Transition of characteristics of the VO₂ films are caused by semiconductor metal transition (SMT). This phenomenon is attributed as the change maker in transition of resistivity and transmitted optical power through the VO₂ films. Apart the substrates mentioned, …