Engineering Commons^™

Ecg Classification Using Adaptive Neuro-Fuzzy Inference System, Jason N. Rivera, Kelsey C. Rodriguez

Electrical Engineering

ECG classification using Adaptive Neuro-Fuzzy Inference System (ANFIS), sponsored by Professor Yu, involves the diagnosis of six cardiovascular conditions by analyzing one single neural network. Today’s ECG signal instrumentation does not have the ability to characterize cardiovascular diseases without a doctor’s complete evaluation and diagnosis. Our project gives a promising solution to the inability in the current market’s ECG signal instrumentation to correctly evaluate and diagnose cardiovascular diseases. ECG signal reportings is a non-invasive process that will lead to many more applications of advanced signal processing and data analysis/diagnosis of cardiovascular diseases. The inputs to the ANFIS are annotations of …

Dc House Energy Management System, Zachary L. Eldredge, Zoe M. Hay

Electrical Engineering

In this work, a previously completed proof of concept for an Energy Management System (EMS) for the DC House project has been revised and re-implemented. The implemented design changes will improve the performance and reproducibility of the system. This new design of the EMS replaces the two-separate buck and boost DC-DC converters with a single bidirectional DC-DC converter to reduce components and improve efficiency. Analysis of the bidirectional DC-DC converter shows high efficiency especially at larger load currents. The code of the previous work was updated for smoother operation as well as to accommodate an LCD capable of displaying more …

Solar Powered Electric Vehicle Charger, Jessica A. Bombardier Shaw, Andrew F. Moradpour

Electrical Engineering

This project will look into how to create an efficiently-operated solar powered electric vehicle charger. The solar panel will harvest energy from the sun that will be stored a battery pack to be readily available to charge an electric vehicle. These stations could be commercialized to be located along a highway, or personalized for a in-house installation.

Make Scents: Senior Project Report, Bruce Edward Mitchener Iii, Dennis Tsuker

Electrical Engineering

The purpose of this project was to create a smart air freshener. A complete user-friendly system that is programmable and simple to use for customers of all ages. Many constraints were met in order to achieve the final product and the necessary requirements. This Senior Project helps maintain a clean scented room of any size with its programmable functions to set spray times per the user’s request. Final system incorporates a user operated remote controller that catches the signal using an infrared sensor. The ease and simplicity of this air freshener makes it stand out in the competing market of …

Seestar Iii Sensor Module, Matthew M. Ducasse

Electrical Engineering

SeeStar is an autonomous, underwater camera system for observing aquatic environments. The Monterey Bay Aquarium Research Institute (MBARI) developed SeeStar to provide a low cost solution for marine researchers wishing to observe underwater ecosystems over long durations. The system consists of completely open-source designs featuring only common, commercially available components. This means users may purchase the components and build the system themselves. While MBARI originally intended for the system to simply capture photo and video data, many customers have requested additional sensors to gather contextual data to complement the captured images. The latest generation, SeeStar III, features a sensor module, …

Low-Noise Speed-Optimized Large Area Cmos Avalanche Photodetector For Visible Light Communication, Md. Mottaleb Hossain, Sagar Ray, Jeng Shiuh Cheong, Liang Qiao, Aina N.A.P. Baharuddin, Mona Mostafa Hella, John P.R. David, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

Mean-gain and excess-noise measurements are presented for a 350 × 350 μm ² P+/N-well/P-sub and a 270 × 270 μm ² N-well/P-sub avalanche photodetectors fabricated using 0.13-μm CMOS technology. The active area of the P+/N-well/P-sub device was divided into multiple subsections to decrease transit time and increase speed. For the P+/N-well structure, remarkably low excess-noise factors of 4.1 and 4 were measured at a mean gain of 16 corresponding to a k value of approximately 0.1, using a 542 (633) nm laser. For a variant N-well/P-sub structure, excess-noise factors of 6.5 and 6.2 were measured at a mean-gain of 16 …

Antenna Design For Small Uav Locator Applications, Randall L. Musselman, Steve Eugene Watkins

Electrical and Computer Engineering Faculty Research & Creative Works

An antenna design problem is presented for a small UAV application. A UAV locator system must include an on-board transmitter with the capability to provide a beacon signal, in the event of a crash, and a receiver that is tailored for a transmitter hunt. This specific context for applying antenna theory allows a variety of design constraints, technical approaches, performance measures, and required results. The paper provides a structure for organizing the material, example approaches that illustrate possible design choices, and recommendations on educational implementation.

Transient Thermal Analysis Of 3-D Integrated Circuits Packages By The Dgtd Method, Ping Li, Yilin Dong, Min Tang, Junfa Mao, Li (Lijun) Jun Jiang, Hakan Bagci

Electrical and Computer Engineering Faculty Research & Creative Works

Since accurate thermal analysis plays a critical role in the thermal design and management of the 3-D system-level integration, in this paper, a discontinuous Galerkin time-domain (DGTD) algorithm is proposed to achieve this purpose. Such as the parabolic partial differential equation (PDE), the transient thermal equation cannot be directly solved by the DGTD method. To address this issue, the heat flux, as an auxiliary variable, is introduced to reduce the Laplace operator to a divergence operator. The resulting PDE is hyperbolic, which can be further written into a conservative form. By properly choosing the definition of the numerical flux used …

Estimation Of Size And Rotations Of Icebergs From Historical Data Utilizing Scatterometer Data, Jeffrey Scott Budge

Theses and Dissertations

In this thesis, the development and methodology of a new, consolidated BYU/NIC Antarctic Iceberg Tracking Database is presented. The new database combines data from the original BYU daily iceberg tracking database derived from scatterometers, and the National Ice Center's weekly Antarctic iceberg tracking database derived from mostly optical and infrared sensors. Using this data, interpolation methods and statistical analyses of iceberg locations are discussed. The intent of this database is to consolidate iceberg location data in order to increase accessibility to users.Active microwave remote sensing instruments are used to track tabular icebergs and provide a daily estimate of their positions …

Flexible Micro-N-Line Probe And Apparatus To Characterize Electronic Conductivity Of Li-Ion Battery Electrode Films, Derek Van Clement

Theses and Dissertations

A key metric that affects Li-ion battery cell performance is the electronic conductivity of the electrode films. Previous research has found that the conductivity of electrodes is not homogeneous throughout the entirety of the deposited film area. To further characterize the non-homogeneity of the conductivity of electrode films, a micro-N-line probe and a micro-flex-line probe were developed to take micro-scale conductivity measurements of thin-film battery electrodes in a non-destructive manner. These devices have been validated by comparing test results to those of it's predecessor, the micro-four-line probe, on various commercial-quality Li-ion battery electrodes. Results show that there is significant variation …

Evolution Of An Introductory Electrical Engineering And Programming Course, Branimir Pejcinovic, Phillip Wong

Electrical and Computer Engineering Faculty Publications and Presentations

Our first year electrical engineering sequence includes two courses that involve programming and hardware interfacing. ECE 102 deals with engineering problem solving and MATLAB, while ECE 103 introduces C programming. We use MATLAB both as a problem solving tool and as an introduction to programming. Students utilize MATLAB to control a data acquisition device, which enables more realistic team-based projects that combine problem-solving, programming, and interfacing. As is widely recognized, these types of courses are important and difficult to teach. We identified areas that needed improvement in ECE 102: a) outdated lecture format, b) not enough timely feedback, c) insufficient …

Agenda: Second International Workshop On Thin Films For Electronics, Electro-Optics, Energy And Sensors (Tfe3s), University Of Dayton Research Institute

Electro-Optics and Photonics Faculty Publications

University of Dayton’s Center of Excellence for Thin Film Research and Surface Engineering (CETRASE) is delighted to organize its second international workshop at the University of Dayton’s Research Institute (UDRI) campus in Dayton, Ohio, USA. The purpose of the new workshop is to exchange technical knowledge and boost technical and educational collaboration activities within the thin film research community through our CETRASE and the UDRI.

A Survey Of Sparse Channel Estimation In Aeronautical Telemetry, Christopher James Hogstrom

Theses and Dissertations

Aeronautical telemetry suffers from multipath interference, which can be resolved through the use of equalizers at the receiver. The coefficients of data-aided equalizers are computed from a channel estimate. Most channels seen in aeronautical telemetry are sparse, meaning that most of the coefficients of the channel are zero or nearly zero. The maximum likelihood (ML) estimate does not always produce a sparse channel estimate. This thesis surveys a number of sparse estimation algorithms that produce a sparse channel estimate and compares the post-equalizer bit error rates (BER) using these sparse estimates with the post-equalizer BER using the ML estimate. I …

Testimony Of Dr. George H. Baker, Senior Advisor To The Congressional Emp Commission, George H. Baker Iii

Department of Integrated Science and Technology - Faculty Scholarship

This is the script of testimony before the Federal Energy Regulatory Commission. It offers a vision for a future in which our electric power systems will be able to operate through or quickly recover from catastrophic failure due to electromagnetic pulse (EMP), cyber, and physical attacks. The scope of the term ‘EMP’ used in this testimony includes both naturally occurring solar storms and the more energetic man-made EMP hazards. The vision has been discussed with members of the electric power industry, and prominent EMP/cyber/physical protection advocates who find it to be supportable and actionable. The nature of EMP, cyber, and …

Passive Bottom Reflection-Loss Estimation Using Ship Noise And A Vertical Line Array, Lanfranco Muzi, Martin Siderius, Christopher M. Verlinden

Electrical and Computer Engineering Faculty Publications and Presentations

An existing technique for passive bottom-loss estimation from natural marine surface noise (generated by waves and wind) is adapted to use noise generated by ships. The original approach—based on beamforming of the noise field recorded by a vertical line array of hydrophones—is retained; however, additional processing is needed in order for the field generated by a passing ship to show features that are similar to those of the natural surface-noise field. A necessary requisite is that the ship position, relative to the array, varies over as wide a range of steering angles as possible, ideally passing directly over the array …

Generalized Differential Calculus And Applications To Optimization, R. Blake Rector

Dissertations and Theses

This thesis contains contributions in three areas: the theory of generalized calculus, numerical algorithms for operations research, and applications of optimization to problems in modern electric power systems. A geometric approach is used to advance the theory and tools used for studying generalized notions of derivatives for nonsmooth functions. These advances specifically pertain to methods for calculating subdifferentials and to expanding our understanding of a certain notion of derivative of set-valued maps, called the coderivative, in infinite dimensions. A strong understanding of the subdifferential is essential for numerical optimization algorithms, which are developed and applied to nonsmooth problems in operations …

Focusing On Writing To Learn Approach To Increase Engagement And Performance In Digital Design Lab, Salman Siddiqui, Rami Haddad, Mohammad Ahad

Department of Electrical & Computer Engineering Faculty Research & Publications

In an effort to help students in the discipline build on their writing skills throughout the undergraduate curriculum, Georgia Southern University initiated a quality enhancement plan (QEP) with a focus on writing across the Electrical Engineering curriculum. As part of this plan, the Digital Design Lab course, offered at the sophomore level in the curriculum, implemented several strategies to help students build on their previous writing skills, and in the process improved their technical vocabulary, the ability to communicate using it, increased students’ engagement, collaboration, and performance in the course. In this work, the effect of deliberately engaging students in …

Complex Filters As Cascade Of Buffered Gingell Structures: Design From Band-Pass Constraints, Nicole M. Hay

Master's Theses

Complex filters are multi-input, multi-output networks designed to discriminate based upon the relative phase difference between input signals. Complex filters find application in modern wireless systems for single sideband transmission and image-reject reception. This thesis presents one active complex filter implementation using two operational amplifiers per stage, termed “type-II” topology. The “type-II” originates from the passive RC-CR polyphase topology presented by Gingell in his 1973 paper, “Single sideband modulation using sequence asymmetric polyphase networks.” This new topology gains several advantages over existing complex filter implementations, namely “cascadability” (multiple sections placed in series to create a higher-order response) without altering the …

Characterization Of Flexible Hybrid Electronics Using Stretchable Silver Ink And Ultra-Thin Silicon Die, Joshua A. Ledgerwood

Master's Theses

Flexible Hybrid Electronics (FHEs) offer many advantages to the future of wearable technology. By combining the dynamic performance of conductive inks, and the functionality of ultra-thinned, traditional IC technology, new FHE devices allow for development of applications previously excluded by relying on a specific type of electronics technology.

The characterization and reliability analysis of stretchable conductive inks paired with ultra-thin silicon die in theµm range was conducted. A silver based ink designed to be stretchable was screen printed on a TPU substrate and cured using box oven, conveyor convection oven, and photonic curing processes. Reliability tests were conducted including a …

Cubesat Data Transmission And Storage Throughput Optimization Through The Use Of A Zynq Soc Based Cubesat Science Instrument Interface Electronics Board, Caleb Mosby Munsill

Master's Theses

The CubeSat standard sprang from the desire to create a satellite standard that would open the doors for universities and other lower budget research institutions by making it more feasible to get their work into space. Since then, many other institutions and industries have been adopting variations on the standard for their own use. As more people are seeking out to use the CubeSat standard as their main bus, the standards and practices of the community have grown and expanded and with this growth, new challenges have been created. One such challenge is the bandwidth limitation in the RF-downlink. When …

Design And Construction Of 1800w Modular Multiple Input Single Output Non-Isolated Dc-Dc Converters, Angelo Miguel Asuncion Gallardo

Master's Theses

This thesis report details the design and construction of non-isolated DC-DC converters to create a Multiple Input Single Output (MISO) converter for combining multiple renewable energy sources into one single output. This MISO uses the four-switch buck-boost topology to output a single 48V from multiple nominal 24V inputs. The MISO converter implements a modular approach to deliver 1800W output power. Each module in the MISO is rated at 600W and they share the output power equally. Hardware results show that the converter produces 1800W of output power from three sources with 96.4% efficiency. Each module also demonstrates equal sharing feature …

A Modified Boost Converter With Reduced Input Current Ripple, Nathan H. Lentz

Master's Theses

Battery-powered trends in consumer electronics, transportation, and renewable energy sectors increase demands on DC/DC converter technology. Higher switching frequency and efficiency reduces solution size and cost, while increasing power capabilities. Still, switching noise remains the primary drawback associated with any DC/DC converter. Reducing a converter’s input ripple helps prevent switching noise from spreading to other systems on a shared DC power bus. This thesis covers the analysis, simulation, and implementation of a recently-proposed boost converter topology, alongside an equivalent standard boost converter, operating in steady-state, continuous conduction mode. A Matlab-based simulation predicts each converter’s input ripple performance using a state-space …

Dc-Dc Converter Control System For The Energy Harvesting From Exercise Machines System, Alexander Sireci

Master's Theses

Current exercise machines create resistance to motion and dissipate energy as heat. Some companies create ways to harness this energy, but not cost-effectively. The Energy Harvesting from Exercise Machines (EHFEM) project reduces the cost of harnessing the renewable energy. The system architecture includes the elliptical exercise machines outputting power to DC-DC converters, which then connects to the microinverters. All microinverter outputs tie together and then connect to the grid. The control system, placed around the DC-DC converters, quickly detects changes in current, and limits the current to prevent the DC-DC converters and microinverters from entering failure states.

An artificial neural …

Hand (Motor) Movement Imagery Classification Of Eeg Using Takagi-Sugeno-Kang Fuzzy-Inference Neural Network, Rory Larson Donovan

Master's Theses

Approximately 20 million people in the United States suffer from irreversible nerve damage and would benefit from a neuroprosthetic device modulated by a Brain-Computer Interface (BCI). These devices restore independence by replacing peripheral nervous system functions such as peripheral control. Although there are currently devices under investigation, contemporary methods fail to offer adaptability and proper signal recognition for output devices. Human anatomical differences prevent the use of a fixed model system from providing consistent classification performance among various subjects. Furthermore, notoriously noisy signals such as Electroencephalography (EEG) require complex measures for signal detection. Therefore, there remains a tremendous need to …

Design Of An Active Harmonic Rejection N-Path Filter For Highly Tunable Rf Channel Selection, Craig J. Fischer

Master's Theses

As the number of wireless devices in the world increases, so does the demand for flexible radio receiver architectures capable of operating over a wide range of frequencies and communication protocols. The resonance-based channel-select filters used in traditional radio architectures have a fixed frequency response, making them poorly suited for such a receiver. The N-path filter is based on 1960s technology that has received renewed interest in recent years for its application as a linear high Q filter at radio frequencies. N-path filters use passive mixers to apply a frequency transformation to a baseband low-pass filter in order to achieve …

Mini High Temperature Test Unit Final Design Report, Kevin Liu, Juan P. Castillo

Mechanical Engineering

Lawrence Livermore National Laboratory has invested considerable effort to develop new standard for nuclear grade HEPA filters that can withstand high temperatures along with methods to optimally test not only the experimental filter media, but also new frame seals and media binders. Therefore, LLNL in collaboration with Cal Poly has designed and built a Mini High Temperature Testing Unit (MHTTU) to recreate conditions observed during a fire and to test different materials in an effective, inexpensive, regulated and reliable method. The existing prototype was unable to achieve the ideal testing conditions of 1000°F air at the low flow rates of …

Marine Gastrobot Final Design Report, Wesley B. Williams, Eric Kane Dreischerf, Tommy Nicholas Yath

Mechanical Engineering

The Marine Gastrobot sponsored by Dr. Christopher Kitts of the Cal Poly Center for Applications in Biotechnology was a research and development effort intended to explore the use of microbial fuel cell technology as a power source for underwater robots. Our team Ocean Locomotion succeeded in developing a first iteration of an underwater robotic platform suitable for microbial fuel cell integration. The primary feature of the design is its sinusoidal fin propulsion intended for benthic exploration with limited risk of entanglement. During the course of development, Ocean Locomotion explored the use of low power actuation methods and determined their limited …

Blend It Wine Blending Distribution System, Connor Clarry, Russell Temple, Matt Moren

Mechanical Engineering

No abstract provided.

Verification Of Receiver Equalization By Integrating Dataflow Simulation And Physical Channels, David M. Ritter, Tina Smilkstein

Master's Theses

This thesis combines Keysight’s SystemVue software with a Vector Signal Analyzer (VSA) and Vector Signal Generator (VSG) to test receiver equalization schemes over physical channels. The testing setup, “Equalization Verification,” is intended to be able to evaluate any equalization scheme over any physical channel, and a decision-directed feed-forward LMS equalizer is used as an example. The decision-directed feed-forward LMS equalizer is shown to decrease the BER from 10^-2 to 10^-3 (average of all trials) over a CAT7 and CAT6A cable, both simulated and physical, for 1GHz and 2GHz carrier, and 80MHz data rate. A wireless channel, 2.4GHz Dipole …

Modeling And Charging Control Of A Lithium Ion Battery System For Solar Panels, Garrett David Heinen

Master's Theses

The advancement in solar panel and battery technology makes them useful for energy supply and storage. This thesis involves the modeling and charging control of a lithium ion battery system for solar panels. The proposed model is based on the parameters and characteristics of a realistic battery and solar panel system; and the hybrid control approach combines the advantages of the adaptive incremental conductance method and the perturb and observe method to track the maximum power point of the solar panel for charging the battery unit. Computer simulation results demonstrate that this proposed approach offers a faster convergence rate than …