Engineering Commons^™

Advances In Cellulose Nanomaterial-Based Foams For Environmental Applications, Md Musfiqur Rahman

Electronic Theses and Dissertations

The use of metal-oxide nanoparticles adsorbents is limited to fixed-bed columns in industrial-scale water treatment applications. This limitation is commonly attributed to the tendency of nanoparticles to aggregate, the use of non-sustainable and inefficient polymeric resins as supporting materials, or a lack of adsorption capacity. Foams and aerogels derived from cellulose nanomaterials have unique characteristics, such as high porosity and low density, which enables their use in a variety of environmental applications, including water treatment. However, the overall use of cellulose nanomaterial-based foams in various environmental sectors is limited due to the high cost of production associated with time- and …

Estimation Of Wood Pulp Fiber Species Composition From Microscopy Images Using Computer Vision, Tyler Seekins

Electronic Theses and Dissertations

Pulp mills and papermakers require careful control of input raw materials. The paper pulp composition, consisting of blends of different wood fiber types, affects multiple final product properties in interacting ways and impacts process operating conditions. Manual estimation of composition by classification and counting using microscopy is time consuming, repetitive, error-prone, and fibers are not always identifiable. Using a dataset of 359,840 fibers from 12,690 images of either hardwood or softwood fibers from 423 microscopy slides with data partitioned into 60% training, 20% validation, and 20% testing splits by slide, and a sequence of principal components analysis, Gaussian mixture, image …

The Development Of An Advanced Biorefinery To Produce Cellulosic Sugars And Bionanomaterials, Carlaile Fernanda De Oliveira Nogueira

Electronic Theses and Dissertations

Market trends show growing interest in cellulose nanomaterials due to their low environmental impact. However, current nanocellulose isolation technologies face technoeconomic and life cycle limitations. Previous research has shown that enzymatic treatments effectively reduce the energy input for mechanical nanocellulose isolation. Simultaneously, there is potential to improve the viability of cellulosic ethanol facilities by coproducing nanocelluloses as high-value product obtained from agricultural feedstock. Here, our goal was to study the mass balance of enzymatic-mechanical processes that coproduces cellulosic sugars and nanocelluloses, evaluating the technical feasibility of converting lignified and non-lignified materials.

First, we have determined a feasible 50:50 mass ratio …

Use Of Photo Isomers To Enhance The Removal Of Lignin From Woody Biomass Hydrolysate, Dipesh J. Karki

Electronic Theses and Dissertations

In this investigation we propose a novel method to enable precipitation of desired solutes using photo-isomers in the extraction solvent. This photo-switchable solvent would enable dissolution or precipitation of desired components using alternating UV or visible light to modify the solubility of the compounds of interest. Three photo-isomers namely native azobenzene, diethoxy azobenzene and diethylamino azobenzene were studied in three different organic solvents: medium chain length alcohol, ethanol and acetone. It was found that among the different combinations of solvent and photo-isomer, acetone and the 4,4’-diethoxy azobenzene solution was most efficient at precipitating dissolved lignin in response to UV light …

Measuring Of Thermal Conductivity And Heat Capacity Of Different Papers And Heat-Sealing Process Of Papers With A Polymer Layer, Amenah Khalaf

Electronic Theses and Dissertations

Packaging is an important and safe way to protect our food and other things through transportation, but the use of plastic based packaging is causing issues with plastic pollution. To replace plastic packaging with a paper-based option that has a barrier coating, good heat sealing will be needed to be a drop-in replacement. While much as been studied on the heat sealing of polymer layers, little has been reported around the heat sealing of paper that has a polymeric barrier coating.

Experiments were conducted to characterize the thermal conductivity and heat capacity of paper as a function of press pressure …

Efficient Sintering Of Lunar Soil Using Concentrated Sunlight, Diprajit Biswas

Electronic Theses and Dissertations

Construction material is one crucial need for long-term habitation on the moon. When concentrated for high heat flux, solar radiation can heat lunar soil or regolith until it sinters at temperatures above 900°C. The solid, sintered soil simulant can be used as construction material. This work explores the conditions leading to effective lunar soil sintering for both direct and indirect irradiated sintering. Lunar soil simulants were sintered using concentrated light from a xenon-arc lamp with varying heat flux intensity. During direct sintering of LHS-1, a sintering range of 860°C-1140°C corresponding to a peak heat flux of 105-120 kW/m2 was identified …

The Influence Of Pre Coating Layers On Barrier Coatings, Kritee Pokharel

Electronic Theses and Dissertations

Layers of cellulose nanofibrils (CNF) on paper have been demonstrated to be an effective barrier against oxygen and grease and have been shown to improve the barrier performance of dispersion-based barrier coatings. The potential to produce paper grades that have good oxygen, grease, and moisture barrier properties is clear, but a good understanding of the synergies between CNF, other coating layers, and water-borne barrier coatings (WBBC) is not clear. Different coat weights of a WBBC were applied to papers that have a range of different qualities and amounts of the CNF layer on them. The same WBBC was also applied …

Investigation Of Pulsed Electrolysis For Hypochlorous Acid Production, Khoa V. Kieu

Electronic Theses and Dissertations

Because of the Covid-19 pandemic along with the delay in the worldwide supply chain, there were disinfectant shortages that lasted for weeks around the world. Therefore, on-site production is a promising solution to satisfy the increasing demand. As more and more people are shifting toward safer and more environmentally friendly products, we are interested in investigating the electrolysis of sodium chloride (NaCl) solution to produce hypochlorous acid (HOCl). Electrolysis is inexpensive as it requires only sodium chloride and electricity, and it does not have any negative impact on the environment. Moreover, electrolysis can be coupled with renewable energy to utilize …

Solid Acid Catalyzed Dehydration Reactions Of Biomass-Derived Alcohols, Mackenzie Todd

Electronic Theses and Dissertations

Concerns around climate change and the use of fossil resources contributing to increasing carbon dioxide concentrations in the atmosphere has motivated transitions to use biomass resources for the production of specialty chemicals and fuels, in hopes of creating a more cyclical use of carbon. The work presented here focuses on two different aspects of catalytic upgrading of biomass-derived platform molecules using heterogeneous acid catalysts. First, we use an interdisciplinary and iterative approach to process development for producing a diesel fuel additive from pyrolysis oils of woody biomass. We use fuel property calculations to define measures of success in chemical upgrading …

The Influence Of Heat And Mass Transfer On The Setting Rate Of Adhesives Between Porous Substrates, Mubarak Mohammed Khlewee

Electronic Theses and Dissertations

The dynamic penetration of fluid into a porous media where other changes are occurring such as temperature or concentration is of interest to a number of situations. However, little experimental and theoretical analysis of this situation is found in the literature where most of the previously published works have studied the penetration with constant physical properties, where there is no change of the fluid as it enters the pores. This situation is important in the setting of adhesives in porous medium such as in the setting of hot melt and water-based adhesives in the production of paper based packaging. The …

Disinfection Applications Of On-Site Hypochlorous Acid Production, Deborah Ngabanyi Sebagisha

Electronic Theses and Dissertations

Hypochlorous acid (HOCl) is a weak acid, but strong oxidizing agent produced naturally in the human body to fight viruses and bacteria. Hypochlorous acid can be produced by electrolysis of sodium chloride and water enabling local production of disinfectant, where it is needed. Hypochlorous acid has many applications including in wound care, skin care, and disinfection of health and dental clinics. In this work, two hypochlorous acid applications were explored that could utilize local production by electrolysis. These applications were wastewater treatment and sanitization of dental operating rooms.

An electrochemical reactor and process were designed, constructed, and tested for hypochlorous …

S8e10: How Can Nature-Inspired Engineering Improve Human Health?, Ron Lisnet, Caitlin Howell

The Maine Question

Antibiotic resistance has become a growing problem in the treatment of bacterial infections. In addition to minimizing or negating the effects of existing medicine, these antibiotic-resistant bacteria, or “superbugs,” are mutating faster than the development of new remedies.

Caitlin Howell, University of Maine associate professor of biomedical engineering, is working on new tools that take notes from nature to combat antibiotic-resistant bacteria. Similar to the way in which the human body keeps balance with its own bacterial populations, Howell’s devices use nontoxic, non-invasive surface-based technology to trap bacteria and prevent them from spreading.

In this episode of “The Maine Question” …

Operation And Preliminary Energy Balance Of A Portable Kelp Dryer In Maine, Tuqa Al-Asadi

Electronic Theses and Dissertations

Seaweed (macroalgae) is a marine resource that has a high economic value. Seaweeds are important commodities as raw material for food or additives and as a source of biomass. One popular species of seaweed is Sugar kelp (Saccharina latissima) – a brown algae that is native to the Maine coast and also a commonly farmed species. It is a rich source of fibers, vitamins, minerals, and antioxidants. Seaweeds are highly perishable due to their high moisture content and will spoil quickly if not preserved, therefore a common practice is to dry the product to prolong storage life and to minimize …

Biobased Packaging Materials From Cellulose Nanofibrils Produced From Virgin Wood Pulp Or Recycled Cardboard Pulp, Md Ikramul Hasan

Electronic Theses and Dissertations

Self-standing cellulose nanofibril (CNF) films are regarded as one of the promising alternatives to current petroleum-based packaging materials. The mechanical and barrier properties of CNF films are not yet up to the mark for certain applications, especially at high relative humidity. Those properties of CNF films can be tuned by the drying methods of films, degree of fibrillation, cross-linking, and controlled shrinkage. A comprehensive understanding of these processes and their influence on the structure and properties of CNF films have been presented in this thesis.

First, we prepared CNF films from CNF suspensions with two different degrees of fibrillation- standard …

Contact Dewatering Of Cellulose Nanofibers For Biopolymer Composite Applications, Alexander Collins

Electronic Theses and Dissertations

Cellulose Nanofibrils (CNFs) are promising materials for reinforcement of polymer matrices attributable to their impressive physical and mechanical properties, as well as their biodegradability. However, the utilization of these materials in composites is made challenging by the water content of CNF slurries, the tendency of CNFs to agglomerate as they dry, and incompatibility between hydrophilic CNFs and hydrophobic polymer matrices. The most commercially viable drying methods to produce small-scale dry CNFs, such as spray drying, are very energy intensive, can only dry the materials down to micron-scale agglomerates, and do not preserve fibrillar aspect ratios. “Contact dewatering,” or the removal …

Intersections Of Environmentalism, Chemistry, And Racism: An Experimental Study Of Halobenzene Hydrogenolysis And Critical Communication Studies Of Equitable Learning Practices Rooted In Black Feminism, Lauren O. Babb

Electronic Theses and Dissertations

Increasing concentrations of fluorinated aromatic compounds in surface water, groundwater, and soil pose threats to the environment. Fundamental studies that elucidate mechanisms of dehalogenation for C-X compounds (where X represents a halide) are required to develop effective remediation strategies. For halogenated benzenes, previously published research has suggested that the strength of the C-X bond is not rate-determining in the overall rate of dehalogenation. Instead, the rate-determining step has been hypothesized to be adsorption of the C-X compound onto the surface of a catalyst. Building on this hypothesis, in this work, we examine the reaction kinetics of fluorobenzene conversion to benzene, …

Improving Degree Of Delignification And Selectivity Of Oxygen Delignification Of Southern Pine Kraft Pulp, Azadeh Pahlevanzadeh

Electronic Theses and Dissertations

Oxygen delignification is a pre-bleaching stage that provides environmental benefits for bleached pulp production by replacing about 50% of the chlorine-based bleaching chemicals with oxygen. The resulting reduction in chlorine-based chemicals leads to a significantly lower release of chlorinated organics in the pulp bleaching effluent. However, the main disadvantage of applying oxygen delignification is the low delignification/cellulose degradation selectivity compared to chlorine dioxide bleaching. Modern conventional oxygen delignification is limited at level 60% delignification to maintain an acceptable cellulose Degree of Polymerization (DP) and thus fiber strength as indicated by the pulp intrinsic viscosity. The increase in the degree of …

Catalytic Ring Opening Of Mono- And Bicyclic Compounds For The Production Of Renewable Diesel And Jet Fuel, Matthew J. Kline

Electronic Theses and Dissertations

Thermal DeOxygenation (TDO) is a process that converts organic acids produced from cellulose hydrolysis and dehydration into a low-oxygen bio-oil containing substituted naphthene compounds. The high aromatic content is desirable for gasoline fractions, but middle distillates such as diesel and jet fuel require upgrading via hydrogenation and ring opening to achieve better combustion characteristics. Previous research has demonstrated that TDO oil could be hydrogenated over high-surface-area nickel catalysts to improve the combustion characteristics, but the cetane number was still below the specifications.

Multiple supported catalysts were synthesized by ion exchange and incipient wetness impregnation, and the catalysts were characterized by …

Effects Of Fiber Orientation On The Coefficient Of Thermal Expansion Of Fiber-Filled Polymer Systems In Large Format Polymer Extrusion-Based Additive Manufacturing, José Luis Colón Quintana, Lucinda Slattery, Jon Pinkham, Joanna Keaton, Roberto A. Lopez-Anido, Keith Sharp

Civil Engineering Faculty Scholarship

Large format polymer extrusion-based additive manufacturing has been studied recently due to its capacity for high throughput, customizable bead size and geometry, and ability to manufacture large parts. Samples from three fiber-filled amorphous thermoplastic materials 3D printed using a Masterprint 3X machine from Ingersoll Machine Tools were studied, along with their neat counterparts. Characterization techniques included thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and thermo-mechanical analysis (TMA). TGA results showed that the fillers decreased the degradation temperature for most of the materials investigated, with a 30°C decrease for polycarbonate (PC) and a 12°C decrease for polyethylene terephthalate glycol (PETG). For …

Charged-Particle Interactions To Generate Novel Coatings And Materials, Pradnya D. Rao

Electronic Theses and Dissertations

A typical paper coating formulation contains anionically charged pigments and latex to provide a high-quality surface for printing. However, during application and drying, the latex can migrate to the surface or deep into the paper, resulting in weak coating layers or the need to use a high latex content to obtain the same strength properties. In this thesis, we have explored the introduction of cationically charged particles into the suspension as a way to reduce the amount of binder in the coatings, improve coating strength and reduce binder migration. With these aims in mind, we have generated cationic precipitated calcium …

Techno-Economics And Life Cycle Analysis Of Upgrading Woody Biomass To Diesel Blendstock, Aysan Najd Mazhar

Electronic Theses and Dissertations

Woody biomass conversion to transportation fuels have been developed as alternatives to fossil fuel production to reduce greenhouse gas emissions and to increase energy security. Fast pyrolysis, a thermochemical technology, has the potential to offer high efficiencies to produce liquid transportation fuels from woody biomass. Fast pyrolysis involves rapid heating of biomass particles in the absence of air at approximately 500°C and results in non-condensable gases, bio-oil (pyrolysis oil), and char as products. The pyrolysis oil can be upgraded via integrated mild hydrogenation and etherification processes to a high energy density fuel that can be blended with diesel for transportation …

Nsf Career Award Supports Schwartz's Research On The Chemical Process For Making Rubber Component, Marcus Wolf

General University of Maine Publications

advance his ongoing dissection of the Lebedev process. The well-known, multi-step chemical reaction is used to make butadiene from biomass-derived ethanol. However, little research has been conducted on the Lebedev process at the molecular level. Understanding the intricacies of this process will help researchers create new catalysts necessary for the chemical reactions to make goods from both petroleum and biomass, that would increase butadiene yield.

Reaction Kinetics And Mechanism Investigations Of Renewable Chemicals Production From Biomass, Hussein Talib Abdulrazzaq

Electronic Theses and Dissertations

The development of the technologies and the improved processes for the production of high value bio-based chemicals is one of the most important challenges at the present time. This new movement is not only important from an environmental perspective, but also it is a profitable approach to provide affordable and efficient processes. Therefore, the chemical catalytic upgrading processes over various homogenous and heterogeneous catalysis could be an outstanding modification to upgrade biomass-derived platform molecule to high value applications. In this dissertation, we highlight our recent progress in developing new chemistries and processes for upgrading biomass-derived molecules and address the challenges …

Understanding Biomass Upgrading Through Hydrogenolysis Reactions: Kinetics And Mechanism, Jalal Tavana

Electronic Theses and Dissertations

This dissertation involves several hydrogenolysis reactions but is mainly focused on hydrodechlorination (HDC) of chlorobenzene (PhCl) and hydrodeoxygenation (HDO) of 2-furancarboxylic acid (FCA). Hydrodechlorination of PhCl has been the subject of research for some time. Here, we used a Pd/C catalyst to study this reaction though rigorous kinetics and mechanistic analyses in a CSTR reactor. The H₂/D₂ kinetic isotope effect (KIE) experiment revealed that H₂ is not involved in a rate controlling step. The kinetics data are in agreement with similar systems reported before and follow a first-order dependence on chlorobenzene, half order for hydrogen and …

Hydrogenation Of 2-Methylnaphthalene In A Trickle Bed Reactor Over Bifunctional Nickel Catalysts, Matthew J. Kline

Electronic Theses and Dissertations

Biomass thermal conversion processes, such as pyrolysis, tend to produce mixtures of mono- and poly-aromatic species. While the high aromatic content is desirable in gasoline fractions, middle-distillate cuts, particularly jet fuel and diesel, require upgrading via hydrogenation and ring opening to achieve better combustion characteristics. There have been many proposed methods for producing drop-in fuels from woody biomass, one of them being Thermal DeOxygenation (TDO). The TDO process converts organic acids from cellulose hydrolysis into a low-oxygen bio-oil containing large amounts of substituted naphthalene compounds.

Poly-aromatic molecules, such as those found in TDO oil, have low cetane numbers (CN), particularly …

Fabrication Of Silicon Microneedles For Dermal Interstitial Fluid Extraction In Human Subjects, Caleb A. Berry

Electronic Theses and Dissertations

The goal of this project is to design and develop a fabrication process for silicon microneedle arrays to extract dermal interstitial fluid (ISF) from human skin. ISF is a cell- free, living tissue medium that is known to contain many of the same, clinical biomarkers of general health, stress response and immune status as in blood. However, a significant barrier to adoption of ISF as a diagnostic matrix is the lack of a rapid, minimally invasive method of access and collection for analysis. Microfabricated chips containing arrays of microneedles that can rapidly and painlessly access and collect dermal ISF for …

Selectivity Of The Catalytic Hydrogenation Of Cinnamaldehyde Using A Polymer Cross-Linked Catalyst, Madeline Logan

Honors College

The transition from non-renewable fossil fuel chemical feedstocks to bio-renewable chemical feedstocks will be vital for the health of the environment. The current processing and use of fossil fuels produced by the petroleum industry release greenhouse gasses like carbon dioxide into the air causing heat to get trapped in the atmosphere. If greenhouse gas emissions continue at the rate they are now it is expected to cause polar ice caps to melt, ocean levels to rise, and climate all over the globe to change. By switching to bio-renewable feedstocks, the level of greenhouse gasses emitted would drastically decrease because processing …

Using Cellulose Nanofibrils And Calcium Carbonate In Single-Use Utensils, Sierra Yost

Honors College

As humanity becomes aware of the environmental issues that come from plastics, substitutes for single-use plastic are needed. Straws, expanded polystyrene, and grocery bags especially have been placed under scrutiny, but there is a need to replace other single use plastics such as eating utensils and cup lids. In this thesis, the properties of cellulose nanofibrils and calcium carbonate mixtures are characterized to determine the feasibility of their use as a plastic replacement. Using cellulose nanofibrils poses two challenges: 1) it shrinks when dried causing difficulty in forming an object, and 2) it is produced in a 3 weight percent …

Cellulose Nanofibrils (Cnf) For Textile Applications: Production Of Neat Cnf Filaments And Reinforcement Of Natural Fiber Yarns, Shokoofeh Ghasemi

Electronic Theses and Dissertations

Being the most abundant natural polymer on earth, cellulose materials have been used in many different applications. Cellulose nanofibrils (CNF) are a relatively new group of lignocellulose resource-based nanomaterials and have been the topic of many research efforts in wood products and material science field over the recent years. Using CNF in textile applications is one way to diversify product portfolio of these materials as they contain nanoscale fibrils with high mechanical properties which can fulfil textile industry’s demand for strong natural fibers. Considering that CNF is a wood-based cellulosic material in the form of water suspension, in order to …

Prediction Of Paper Coating Mechanical Behavior Based On Particle-Scale Models, Daniel H. Varney

Electronic Theses and Dissertations

The mechanical properties of pigmented coatings are important for a number of situations; including coated paper, architectural paints, and structures in flexible lithium ion batteries. Coated paper and board undergo a variety of post coating application processes which have the potential to cause serious quality problems such as cracking, picking, and crack-at-the fold (CAF). Because a large number of parameters are known to influence the results, fundamental models are needed to help describe these processes and link them to the coating formulations and to the defects.

A discrete element method (DEM) computer model was developed to describe the pigment level …