Construction Engineering Commons^™

Cm Member Of Slocoe Peace Conference Center Feasibility Study, Jackson Reynolds

Construction Management

This paper describes the parking design and estimate portion of a whole feasibility study conducted by an interdisciplinary team. The interdisciplinary team consisted of three senior undergraduate industrial engineering students, and one senior undergraduate construction management student. This feasibility study was conducted for the San Luis Obispo County Office of Education (SLOCOE) to determine if it is feasible to construct a new, 400-person conference center on a site in San Luis Obispo, CA. The complete study includes analyses of the following topics: economic, utilities, traffic/road, approval from Chumash Tribe, social/historical, climate, geological, vegetation and wildlife, noise and pollution, parking, mandatory …

Facilitating The Industrial Sector's Adoption Of Collaborative Project Delivery Methods, Xavier Wood-Aliberch

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

In an effort to improve outcomes in the civil and healthcare sectors, clients have adopted collaborative project delivery methods for the delivery of their capital projects. The success stories in these sectors have gathered the attention of clients in the industrial sector, where cost and schedule overruns have become the norm. The central objective of this thesis is to help clients make the transition to this new type of project delivery.

This thesis was written in a three-paper format, where each paper addresses a challenge with the adoption of collaborative delivery methods. The first paper investigates what type of industrial …

Underground Construction And Space Utilization: A Bibliometric Analysis, Mugdha Praveen Kshirsagar Mrs, Sanjay Kantrao Kulkarni Dr, Nilesh Vedprakash Arora Mr, Devesh Dinesh Maheshwari Mr, Ankush Kumar Meena Mr

Library Philosophy and Practice (e-journal)

Land use optimization is a major concern as the world's population grows at an exponential rate. Surface land is already being depleted at an alarming pace. As a result, buildings can be constructed safely underground, allowing for more productive land use. The primary goal of this paper is to perform a bibliometric review of the literature related to Underground Construction in order to determine the growth of Underground Construction as a method of energy or land optimization in recent years. Between 1975 and 2020 is the time span considered for this survey. The results of the Scopus database are the …

A Hermeneutic Phenomenological Study Into The Impact Of Bim On The Social Dynamics Of The Aec Professional In The Workplace., Malachy Mathews Dr.

Doctoral

A review of the literature published surrounding new digital design and construction technologies and associated processes described within the Architecture, Engineering, and Construction (AEC) community as Building Information Modelling (BIM) or Virtual Design and Construction (VDC) reveals a gap in the theoretical understanding of the impact these technologies are having on professionals who work in this industry. The central aim of this research is to discover if there has been a shift in social dynamics as a result of the adoption of BIM in the workplace and, if there has been, to discuss the meaning of this for the industry …

Exploiting Pull-In/Pull-Out Hysteresis In Electrostatic Mems Sensor Networks To Realize A Novel Sensing Continuous-Time Recurrent Neural Network, Mohammad H. Hasan, Amin Abbasalipour, Hamed Nikfarjam, Siavash Pourkamali, Muhammad Emad-Un-Din, Roozbeh Jafari, Fadi Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

The goal of this paper is to provide a novel computing approach that can be used to reduce the power consumption, size, and cost of wearable electronics. To achieve this goal, the use of microelectromechanical systems (MEMS) sensors for simultaneous sensing and computing is introduced. Specifically, by enabling sensing and computing locally at the MEMS sensor node and utilizing the usually unwanted pull in/out hysteresis, we may eliminate the need for cloud computing and reduce the use of analog-to-digital converters, sampling circuits, and digital processors. As a proof of concept, we show that a simulation model of a network of …

Bs News March/April

Building Services Engineering

No abstract provided.

Residential Bathroom And Tile Shower Addition During Covid-19 Quarantine, Joseph Szillinsky

Construction Management

This paper outlines the design and construction of a new code compliant bathroom including: a low profile shower pan, ceramic-tile shower enclosure, and new plumbing piping and fixtures. One of the main objectives was to complete the new shower which would be easily accessible and maintenance free in order to support a local elderly couple. The selection of this project took place during the COVID-19 pandemic approximately nine months after California issued the first mandatory statewide Stay-at-Home Order. During the early design and development stages an opportunity to collaborate with a local trades-person was identified as well as the need …

Indispensable Homes In Third World Countries: Constructing A Home In Tijuana, Mexico, Myles Hubers

Construction Management

This project was created to explore a way in which poverty around the world could ultimately be reduced. The way in which this project intends to demonstrate a method used to reduce poverty is by building a home for a specific family in Tijuana, Mexico. In doing so, this home will act as a model home for a manual, comprised of steps that should be taken to construct similar homes throughout any third world country. The goal of this project is to highlight the importance of poverty in the world while also creating a buildable solution in order to reduce …

Net-Zero Homes, The Homes Of The Future, Primo Guseppi Facchini

Construction Management

Net-Zero homes are the homes of the future (Holmes, 2018). What makes Net-zero homes unique is they rely on solar power, opposed to all standard housing that relies on the power grid. These homes use solar instead of other forms of energy generating technology because it is more affordable and better for the environment. California has blazed the trail for the rest of the United States and the world to follow with their Net-Zero housing proposition. Starting January 2020 California will require all residential buildings to be net-zero homes. Net-Zero homes are important because it is no secret that our …

Comparing The Environmental Impacts Of Using Mass Timber And Structural Steel, Khang Hoang Nguyen, Steelee Knight Morgan

Construction Management

Although mass timber has seen a gradual rise in demand in the past, there has been a lack of extensive research on the environmental impacts of using mass timber as a primary structural framing material. This paper compares structural steel, and mass timber’s total embodied carbon emissions. Accurate estimates were made using plans and specs for different projects retrieved from semi-structured interviews. The estimates were input through the EC3 Calculator to provide extensive total carbon emissions measurements between each construction material. Using structural steel framing increased the project’s overall environmental impact by roughly 84% compared to using mass timber. The …

Quasi-Static Nonlinear Seismic Assessment Of A Fourth Century A.D. Roman Aqueduct In Istanbul, Turkey, Semih Gonen, Ece Erdogmus, Engin Karaesmen, Erhan Karaesmen

Durham School of Architectural Engineering and Construction: Faculty Publications

The majority of architectural heritage consists of load-bearing masonry components made up of stone units and relatively weak mortar joints, yielding potential weak planes for masonry structures where tension and shear failures are expected to occur. Advanced nonlinear analyses are required to simulate these phenomena and predict the corresponding nonlinear structural behavior of historic masonry constructions. In this context, this paper presents a model of a stone masonry Roman aqueduct (the Valens Aqueduct), constructed in the fourth century A.D. in Istanbul, Turkey, to explore the seismic capacity and behavior using the discrete element method (DEM). The employed modeling approach comprises …

Feasibility Of Lora For Smart Home Indoor Localization, Kyungki Kim, Sining Li, Milad Heydariaan, Nour Smaoui, Omprakash Gnawali, Wonho Suh, Min Jae Suh, Jung In Kim

Durham School of Architectural Engineering and Construction: Faculty Publications

With the advancement of low-power and low-cost wireless technologies in the past few years, the Internet of Things (IoT) has been growing rapidly in numerous areas of Industry 4.0 and smart homes. With the development of many applications for the IoT, indoor localization, i.e., the capability to determine the physical location of people or devices, has become an important component of smart homes. Various wireless technologies have been used for indoor localization includingWiFi, ultra-wideband (UWB), Bluetooth low energy (BLE), radio-frequency identification (RFID), and LoRa. The ability of low-cost long range (LoRa) radios for low-power and long-range communication has made this …

Reciclaje Y Reutilización De Materiales De Construcción En Colombia Como Aporte A La Economía Circular, Juan David Mora Castro

Ingeniería Civil

No abstract provided.

To What Extent Can Innovative International Project Delivery Strategies (Which Leverage Bim) Improve The Cost Certainty Of Large Complex Public Procurement Projects In The Context Of Irish Public Procurement?, Bim Tudublin, Roqaya Abouklaib

Capstone Reports

Cost overrun is one of the biggest issues in the construction sector, and cost certainty is one of the main aims of the public construction sector in Ireland. Studies have shown that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. BIM, Lean, and IPD are independent methodologies that encourage collaborative work, and there are existent effective synergies among these concepts. The synergetic innovative international strategies were utilised for delivering large complex projects successfully globally, and many authors have studied large complex public projects that have adopted innovative international project delivery strategies collaboratively and have shown that the cost …

A Critical Analysis Of The Application Of Augmented Reality (Ar) For Monitoring And Documentation Of Construction Site Progress In The Irish Aec Industry., Bim Tudublin, Lukasz Sarnot

Capstone Reports

Sarnot, L. (2021) A critical analysis of the application of augmented reality (AR) for monitoring and documentation of construction site progress in the Irish AEC industry, Capstone Project from the MSc in aBIMM

A Critical Examination Of Visual Programming And Generative Design For The Compliance Checking Of Open Plan Office Layouts Against Hse Guidelines Post Covid-19., Bim Tudublin, Ronan Byrne

Capstone Reports

The purpose of this study is to explore the feasibility of Visual Programming (VP) and Generative Design (GD) in assisting employers review open plan office layouts against Ireland’s HSE guidelines implemented in May 2020 in response to Covid-19. The pandemic has affected all areas of life with workplace standards requiring a complete overhaul. This study will attempt to ascertain compliance with natural ventilation and social distancing requirements through the completion of an experimental research study, utilising Computational Design (CD) tools. A GD study will be undertaken to provide the designer with numerous office layout design solutions to evaluate and evolve. …

Opportunities In The Irish Reinforced Concrete Industry For Lean And Bim Adoption, Bim Tudublin, Kieran Mcconnell

Capstone Reports

The Irish Reinforced Concrete (RC) sector has yet to realise the full potential of Building Information Modelling (BIM) and Lean construction. The positive impacts and benefits of both BIM and Lean in the wider Architecture, Engineering and Construction sector are widely recognised; many of these are transferable to the RC sector, but there is limited research and knowledge on practical transference, uses and advantages. This research aims to fill some of the existing knowledge gaps by examining BIM and Lean adoption and awareness in the Irish RC sector across sub-sectors, professions, and organisational levels, and by exploring opportunities for increasing …

A Critical Analysis Of How Large Irish Architectural Practices Responded To Initial Covid-19 Restrictions And The Affect Implementing Remote Working Had On Bim Processes, Policies, And People, Bim Tudublin, John Mcenroy

Capstone Reports

The unprecedent events which transpired in the 88-day period from the 31st of December 2019 to the 27th of March 2020 have changed the world in which we live and work. The outbreak of Coronavirus disease 19 (COVID-19) and the ensuing pandemic which has evolved are descripted as one in a hundred-year events. This paper researched and critically analyses the operations which large Irish Architecture firms initiated during this period in order to facilitate the ability of its employees working from a remote location, focusing on how the People, Processes and Policies of BIM (3 Ps of BIM); adapted to …

To What Extent Can Lean Construction Processes And Principles Be Utilised In The Design Stage Of A Bim Project In The Irish Design And Construction Industry, Bim Tudublin, Barry Sheramn

Capstone Reports

Although different in many ways, Building Information Modelling (BIM) and Lean Construction are two processes that are having a significant impact on the Design & Construction Industry. In recent years, the Irish AECO industry has seen a tenfold increase across numerous construction disciplines with the adoption of new workflows and processes centred around both BIM and Lean methodologies. Existing literature identifies a strong synergistic relationship between the two processes and highlights the opportunity for Lean processes and principles to be implemented into the design stage workflow. This paper investigated existing literature relating to several lean processes currently implemented in the …

Should Acoustic Simulation Technology Be Utilised In Architectural Practice? Does It Have The Potential For Bim Integration?, Bim Tudublin, Keith Harvey

Capstone Reports

The research presented in this paper, firstly, aims to convey the importance of our acoustic environment through focusing on the effects of undesirable acoustic conditions on cognitive abilities in spaces where cognitive performance is of the utmost concern, our learning environments. Secondly, it aims to investigate current state-of-the-art acoustic simulation methods, available platforms, and their levels of interoperability with architectural BIM authoring software. Structured interviews were carried out with 7 Irish architects and architectural technologists to determine if a disconnection between architectural design and acoustic performance exists and to identify the advantages and disadvantages of current workflows for acoustic performance …

An Examination Of The Use Of Geotechnical Bim To Provide Value Engineering Solutions For Coastal Infrastructure., Bim Tudublin, Eric Brennan

Capstone Reports

The digitisation of construction is taking root as Building Information Modelling is becoming more prevalent across the industry. From an Irish context, the adoption rate of BIM has been slow; nationally its advantages and merits have been welcomed and the appropriate government support is either available, soon to be implemented or in the early conceptual stage. Within the Irish governments Project Ireland 2040 framework there are significant infrastructure developments looming ahead, in particular regarding ports and harbours. The importance of this type of infrastructure is only further compounded due to the UK’s departure from the EU and the need for …

Analysing Bim Implementation In The Egyptian Construction Industry, Ayman Ahmed Ezzat Othman, Mohamed Marzouk, Heba Elsaay

Architectural Engineering

Purpose – This research is built up upon exploring the concepts of building information modeling (BIM) adoption and strategy formulation with the aim to develop a strategy for implementing BIM in the Egyptian construction industry. Design/methodology/approach – The development of the BIM implementation strategy was based on two pillars, namely the literature review and results of the survey questionnaire and interviews. First, the review of literature helped investigating the BIM challenges and international strategies developed to implement BIM worldwide. Findings – The research presented recommendations to assist policymakers in Egypt to facilitate BIM implementation. Originality/value – Although multiple frameworks have …

Módulos Educacionales Complementarios Flexibles, Adaptables Y Productivos Para La Formación Media En La Ruralidad, Paula Daniela Ballesteros González, Raquel Yohana Cárdenas Peña

Arquitectura

El presente proyecto de grado desarrolla módulos educacionales complementarios flexibles, adaptables y productivos para la formación media en la ruralidad. El proyecto se ubica en la ruralidad colombiana, la cual se caracteriza por tener un gran potencial agrícola

El proyecto se desarrolla entendiendo conceptos claves tales como la educación, la productividad, la flexibilidad, adaptabilidad, sostenibilidad, entre otros. A través de esta investigación y anteproyecto, se brinda una posible alternativa a partir de soluciones arquitectónicas y técnico constructivas que agrupan principios de diseño y objetivos planteados para lograr la aplicabilidad dentro de la educación tradicional de técnicas productivas en las escuelas …

Vivienda Vacacional Y Productiva Restrepo Meta, Johan Smith Rios Chaparro, Angie Paola Franco Briceño

Arquitectura

No abstract provided.

Strengthening Prestressed Concrete Bridge Girders And Building Beams With Carbon Fiber Reinforced Polymer Sheets, Herish A. Hussein, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

The effect of Carbon Fiber Reinforced Polymer (CFRP) retrofitting and concrete type on the flexural strength of prestressed concrete I-section girders used in bridges and beams in buildings is investigated. Non-linear moment-curvature relationships are predicted using an iterative algorithm for both non-retrofitted and CFRP-retrofitted prestressed concrete girder and beam cross-sections with various concrete types. Two different CFRP-retrofitting schemes are analyzed for comparing their effectiveness. It is found that although non-retrofitted beam section exhibits greater ductility, the use of CFRP retrofitting in both tension and compression regions simultaneously results in a significant increase in flexural strength. It is also found that …

Complejo Educativo Rural, Desarrollo Y Productividad Del Campo Jenesano - Boyacá, Reynel Castillo Henao

Arquitectura

En la actualidad, el concepto de “lo rural” se expande más allá de lo exclusivo “agrario”, esto se caracteriza por sus variadas dinámicas de funcionamiento y por los desacuerdos en los procesos que se vienen desarrollando.

De este modo de territorio se pretende avanzar en la caracterización del rural por medio de la dimensión económica productiva a través de los jóvenes, para que trascienda a dimensiones como lo institucional, lo sociocultural y lo ambiental.

Ua3/1/1 President's Office-Cherry Reports, Wku Archives

WKU Archives Collection Inventories

Reports made by Henry Cherry to the Board of Regents and departmental reports made to Henry Cherry.

Analysis Of Modern Barn Design, Gunther Soehnlen

Williams Honors College, Honors Research Projects

The agriculture industry is always changing. Barn structures are one of the most important aspects of the agriculture industry. As the agriculture industry changes, so does the design and construction of barns. There are many types of barns, but over the last 300 years four of the most prevalent types have been the Bank Barn, Open Span Truss Barn, Hoop Barn, and Transverse Frame Barn. The Bank Barn and Transverse Frame Barn have been popularly built for over 200 years. The Hoop Barn and the Open Span Truss Barn have been recently introduced to the industry, becoming popular within the …

Building Services Engineering January/February

Building Services Engineering

No abstract provided.

Enhancing Bim Implementation In The Ethiopian Public Construction Sector: An Empirical Study, Solomon Belay, James D. Goedert, Asregedew Woldesenbet, Saeed Rokooei3

Durham School of Architectural Engineering and Construction: Faculty Publications

Recently, the popularity of BIM has grown rapidly in the public construction sector. However, only a few studies so far have been seeking to address the BIM adoption benefits and barriers in developmental public projects across the low-income countries. Thus, the study aims to investigate the benefits and barriers of BIM adoption in the context of the Ethiopian infrastructure market. To achieve the objectives, a comprehensive systematic literature review was conducted to identify BIM adoption benefits and barriers in developing countries. Then, a structured questionnaire survey was conducted to collect data from various professionals working in organizations including client, consultant, …