Architecture Commons^™

Spans Across Time: Compliance Of Historic Maine Coastal Bridges With Modern Geometric Design Standards, Elizabeth Reynolds

Honors College

The purpose of this thesis is to study a wide range of historic bridges along the coast of Maine. Three bridges were selected for study: Sewall’s Bridge, Bailey Island Bridge, and Deer Isle-Sedgwick Bridge. The selected bridges exhibit varying historic treatment approaches, material use, structure type, and span length. This thesis establishes the compliance of these bridges with modern geometric standards, as defined by AASHTO (2011), including maximum grade, vertical and horizontal alignment, roadway width, and sidewalk width. Passing sight distance, passenger comfort and general appearance are not be included in this evaluation of geometric design.

This document outlines the …

Plant Translocation Of Organic Compounds: Molecular And Physicochemical Predictors, Matt A. Limmer, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Root-Soil Boundary Represents One of the Largest Global Biotic-Abiotic Mass-Transfer Interfaces and is a Primary Pollutant Entry Point to the Food Chain. This Interface is Also Critically Important in Phytoremediation Efforts and Herbicide Design. Experimental Data and Single-Parameter Models Have Resulted in the Current Understanding that Moderately Hydrophobic Organic Compounds Are Most Likely to Be Translocated by Plants, Although Recent Evidence Indicates Plants Can Also Translocate Some Hydrophilic Compounds. Molecular Descriptors Initially Applied for Drug Discovery and for Transmembrane Migration in Mammalian Systems Were Applied Here to Determine the Physicochemical Domains and Weighted Desirability Functions to Identify Compounds Amenable …

Method And System For Optimal Coordination Control And Soft Repair Of Multiple Rooftop Heating And Cooling Units, Haorong Li

Durham School of Architectural Engineering and Construction: Faculty Publications

Techniques are described that may be implemented in an adaptive control device to regulate multiple zone environmental units based upon multiple temperature values and multiple airflow values, where each temperature value and each airflow value is related to the temperature and the airflow in a specific zone. In an implementation, the input interface of the adaptive control device is configured to receive multiple temperature values and multiple air flow values from multiple zone sensors. The adaptive control device may calculate multiple operational values based on the multiple temperature values and the multiple air flow values. An operational value indicates a …

Empirically Derived Effective Stiffness Expressions For Concrete Walls, Andrew Mock, Anahid A. Behrouzi, Laura Lowes, Dawn Lehman, Daniel Kuchma

Architectural Engineering

In most cases, analysis to determine component demands for seismic design of concrete buildings employs linear elastic models in which reduced, effective component stiffnesses are used. This document i) reviews the recommendations for defining the effective flexural, shear and axial stiffness of concrete walls that are included in current design codes, standards and guidelines and ii) compares these recommendations with stiffness expressions derived directly from experimental data by the authors and others. Section 2 reviews existing empirically derived and code‐, standard‐, and guideline‐based expressions for the effective stiffness of concrete walls. Section 3 presents the process used by the authors …

Summary Of Large-Scale C-Shaped Reinforced Concrete Wall Tests, Anahid A. Behrouzi, Andrew Mock, Laura Lowes, Dawn Lehman, Daniel Kuchma

Architectural Engineering

Flexural concrete walls (i.e., walls the yield in flexural prior to failure) are used commonly as the lateral load resisting system for mid‐ and high‐rise buildings on the West Coast. They are relatively stiff under service‐level loading, can take on various configurations to accommodate architectural constraints, and are generally assumed to exhibit ductile response under severe earthquake loading. Despite heavy reliance on concrete walls, relatively little research has been done to investigate the earthquake performance of walls with modern design details. Few data exist characterizing the performance of modern walls under variable levels of earthquake loading or the impact of …

The Potential For Energy Reduction In Uk Commercial Offices Through Effective Management And Behaviour Change, Mark Mulville, Keith Jones, Gesche Huebner

Articles

eneral office equipment can be responsible for a significant proportion of overall electrical energy consumption in UK offices and this is predicted to rise significantly over the coming years [Webber, C. A., Roberson, J. A., Brown, R. E., Payne, C. T., Nordman, B., & Koomey, J. G. (2001). Field surveys of office equipment operating patterns. Berkley: CA: Lawrence Berkley National Laboratory]. As a significant contributor to overall energy use, this equipment has a corresponding cost and carbon impact. The legally binding requirements of the climate change act [Department of Energy and Climate Change. (2008 Department of Energy and …

Fit For Renting:An Investigation Into Space Standards Of Irish Housing, Jim Roche, Noel Brady

Books/Book Chapters

No abstract provided.

Summary Of Large-Scale Nonplanar Reinforced Concrete Wall Tests, Anahid A. Behrouzi, Andrew Mock, Laura Lowes, Dawn Lehman, Daniel Kuchma

Architectural Engineering

Nonplanar wall configurations are prevalent in engineering practice, yet relatively little research has addressed nonplanar walls and the earthquake response of these components remains poorly understood. A recent experimental test program conducted by the authors investigated the earthquake response of modern, ACI Code compliant C‐shaped walls subjected to unidirectional and bidirectional lateral loading. To compare the results of this study with previous experimental investigations conducted by others, this document examines laboratory tests of slender nonplanar walls available in the literature. Response histories, damage patterns, drift capacity and failure mechanisms are used to characterize the behavior of each nonplanar wall test …

Development Of A Tribometer To Characterize Lubrication Layer Properties Of Self-Consolidating Concrete, Dimitri Feys, Kamal Khayat, Aurelien Perez-Schell, Rami Khatib

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Last Decade, Significant Advances Have Been Made in Investigating, Understanding and Predicting the Flow Characteristics during Pumping of Concrete. Kaplan Developed Theoretical Equations based on the Rheological and Tribological Properties of Concrete to Predict Pumping Pressures. Several Tribometers Were Developed to Characterize the Flow Properties of Concrete Along a Smooth Wall, But None of Them Allows the Use of Highly Workable Concretes. the Main Reason is that for the Calculation of the Yield Stress and Viscous Constant of the Lubrication Layer, the Concrete is Not Allowed to Be Sheared. in This Paper, a New Design for the Concrete Tribometer …

Virtual Surface Temperature Sensor For Multi-Zone Commercial Buildings, Yuebin Yu, Denchai Woradechjumroen, Daihong Yu

Durham School of Architectural Engineering and Construction: Faculty Publications

Multi-zone structure is commonly used in small commercial office buildings, retail stores and supermarket. While there is no adjacent wall between the zones, the impact of a neighbor zone on the current zone can be approximated and analyzed through the application of virtual walls. It is critical to accurately estimate the virtual wall surface temperature in order to evaluate the model uncertainty and apply improved supervisory control on multiple rooftop air-conditioning units (RTUs). We propose an innovative virtual surface temperature sensor based on system-identification to solve this challenge. The validation of the virtual temperature model is processed by the three …

Hybrid Of Natural Element Method (Nem) With Genetic Algorithm (Ga) To Find Critical Slip Surface, Shahriar Shahrokhabadi, Vahid Khoshfahm, Hamed Nabizadeh Rafsanjani

Durham School of Architectural Engineering and Construction: Faculty Publications

One of the most important issues in geotechnical engineering is the slope stability analysis for determination of the factor of safety and the probable slip surface. Finite Element Method (FEM) is well suited for numerical study of advanced geotechnical problems. However, mesh requirements of FEM creates some difficulties for solution processing in certain problems. Recently, motivated by these limitations, several new Meshfree methods such as Natural Element Method (NEM) have been used to analyze engineering problems. This paper presents advantages of using NEM in 2D slope stability analysis and Genetic Algorithm (GA) optimization to determine the probable slip surface and …

The Influence Of National Culture On Effectiveness Of Safety Trainings During Postdisaster Reconstruction, Behzad Esmaeili, Kevin Grosskopf, Amy Javernick-Will

Durham School of Architectural Engineering and Construction: Faculty Publications

Non-English speaking workers constitute a disproportionately high number of workers involved in postdisaster reconstruction. Additionally, the rate of fatality among these workers is higher than the industry average. Research shows this population is more prone to unsafe behaviors in the working environment, conceivably because many of these workers are sent into the field prior to any formalized training. Recent studies show that the native culture of construction workers can impact risk-taking behavior. While numerous researchers have attempted to develop training materials for Hispanic workers, the number of studies that consider the impact of native culture on safety behavior is minimal. …

Shallow Flat Soffit Precast Concrete Floor System, George Morcous, Maher Tadros

Durham School of Architectural Engineering and Construction: Faculty Publications

A precast concrete floor system that eliminates the need for column corbels and beam ledges while being very shallow. The main advantages of the present system include a span to-depth ratio of 30, a flat soffit, economy, consistency with prevailing erection techniques, and fire and corrosion protection. The present system consists of continuous precast columns, prestressed rectangular beams, hollow-core planks, and cast-in-place composite topping. Testing results have indicated that a 12 inch deep flat soffit precast floor system has adequate capacity to carry gravity loads (including 100 psf live load) in a 30 ft x 30 ft bay size. Testing …

Thermophysical And Mechanical Properties Of Hardened Cement Paste With Microencapsulated Phase Change Materials For Energy Storage, Hongzhi Cui, Wenyu Liao, Shazim Ali Memon, Biqin Dong, Waiching Tang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this research, structural-functional integrated cement-based materials were prepared by employing cement paste and a microencapsulated phase change material (MPCM) manufactured using urea-formaldehyde resin as the shell and paraffin as the core material. The encapsulation ratio of the MPCM could reach up to 91.21 wt%. Thermal energy storage cement pastes (TESCPs) incorporated with different MPCM contents (5%, 10%, 15%, 20% and 25% by weight of cement) were developed, and their thermal and mechanical properties were studied. The results showed that the total energy storage capacity of the hardened cement specimens with MPCM increased by up to 3.9-times compared with that …

Stock Aggregation Model And Virtual Archetype For Large Scale Retrofit Modelling Of Local Authority Housing In Ireland, James Pittam, Paul D. O’Sullivan, Garrett O’Sullivan

Conference Papers

Developing representative archetypes using a bottom up approach for stock modelling is an excellent tool for evaluating the overall performance of the building stock; however it requires detailed analysis of the various building types. Currently there is no detailed housing data base for Local Authority housing in Cork City, Ireland that catalogues the housing stocks geometric properties and thermal characteristics for each typology. This study details a methodology to catalogue the LAH stock and build a detailed housing data base. The GIS web based mapping application Google Street View is used to identify 20 house typologies across 36 LAH developments; …

Cyber-Physical Codesign Of Distributed Structural Health Monitoring With Wireless Sensor Networks, Gregory Hackmann, Weijun Guo, Guirong Yan, Zhuoxiong Sun, Chenyang Lu, Shirley Dyke

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Our Deteriorating Civil Infrastructure Faces the Critical Challenge of Long-Term Structural Health Monitoring for Damage Detection and Localization. in Contrast to Existing Research that Often Separates the Designs of Wireless Sensor Networks and Structural Engineering Algorithms, This Paper Proposes a Cyber-Physical Codesign Approach to Structural Health Monitoring based on Wireless Sensor Networks. Our Approach Closely Integrates 1) Flexibility-Based Damage Localization Methods that Allow a Tradeoff between the Number of Sensors and the Resolution of Damage Localization, and 2) an Energy-Efficient, Multilevel Computing Architecture Specifically Designed to Leverage the Multiresolution Feature of the Flexibility-Based Approach. the Proposed Approach Has Been Implemented …

Plants As Bio-Indicators Of Subsurface Conditions: Impact Of Groundwater Level On Btex Concentrations In Trees, Jordan Wilson, Rachel Bartz, Matt Limmer, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Numerous Studies Have Demonstrated Trees' Ability to Extract and Translocate Moderately Hydrophobic Contaminants, and Sampling Trees for Compounds Such as BTEX Can Help Delineate Plumes in the Field. However, When BTEX is Detected in the Groundwater, Detection in Nearby Trees is Not as Reliable an Indicator of Subsurface Contamination as Other Compounds Such as Chlorinated Solvents. Aerobic Rhizospheric and Bulk Soil Degradation is a Potential Explanation for the Observed Variability of BTEX in Trees as Compared to Groundwater Concentrations. the Goal of This Study Was to Determine the Effect of Groundwater Level on BTEX Concentrations in Tree Tissue. the Central …

Phytotechnologies - Preventing Exposures, Improving Public Health, Heather F. Henry, Joel Gerard Burken, Raina M. Maier, Lee A. Newman, Steven Rock, Jerald L. Schnoor, William A. Suk

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Phytotechnologies Have Potential to Reduce the Amount or Toxicity of Deleterious Chemicals and Agents, and Thereby, Can Reduce Human Exposures to Hazardous Substances. as Such, Phytotechnologies Are Tools for Primary Prevention in Public Health. Recent Research Demonstrates Phytotechnologies Can Be Uniquely Tailored for Effective Exposure Prevention in a Variety of Applications. in Addition to Exposure Prevention, Plants Can Be Used as Sensors to Identify Environmental Contamination and Potential Exposures. in This Paper, We Have Presented Applications and Research Developments in a Framework to Illustrate How Phytotechnologies Can Meet Basic Public Health Needs for Access to Clean Water, Air, and Food. …

The Reduction Of Plug Loads: The Next Obstacle In Achieving Net Zero Energy Buildings, Cian O'Driscoll, Garrett O’Sullivan, Jim Harrison

Conference Papers

As industry pushes for further reductions in the energy consumption of buildings the era of net zero energy, zero carbon buildings has been realised. However, this frontier of highly efficient architecture has unveiled the considerably large problem of plug loads. In a typical office building plug load alone can account for 15% of total energy consumption. In a Net Zero Energy building that percentage can increase to 50+%. This paper discusses the reasons for this increasingly significant building energy load and the importance of reducing it. A methodological approach and results of monitoring the kWh consumption at plug level and …

Dynamic Nonlinearity And Nonlinear Single-Degree-Of-Freedom Model For Cable Net Glazing, Ruo Qiang Feng, Jihong Ye, Guirong Yan, Jin Ming Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Nonlinear Vibration Differential Equation and Vibration Frequency of Cable Net Glazing Subject to Earthquake Loading Was Determined, and a Geometrically Nonlinear Single-Degree-Of-Freedom Model for Cable Net Glazing Was Developed. the Nonlinear Response Spectra Were Established, and Nonlinear Time History Analysis with Finite Element (FE) Models Was Conducted to Verify Them. the Nonlinear Vibration Differential Equation and Frequency Obtained as Described in This Paper Provide a Basis for the Nonlinear Single-Degree-Of-Freedom Model for Cable Net Glazing. the Analytical Formula for the Nonlinear Frequency with a Simplified Expression is Highly Precise and Convenient for Use in Engineering Practice. for Larger-Amplitude Seismic …

Distribution And Accumulation Of Trichloroethylene And Trichloroacetic Acid In Hybrid Poplars, Lucas Odom, Joel Gerard Burken, Lee Newman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Hybrid Poplar Trees Are Known to Take Up Trichloroethylene (TCE) into above Ground Tissues, Where It Degrades into the Metabolites Trichloroacetic Acid (TCAA), Dichloroacetic Acid, and Trichloroethanol and Where Parent Chlorinated Solvents Volatilize to the Atmosphere. based on This Knowledge, Numerous Phytoremediation Applications Have Been Implemented for TCE and Other Chlorinated Solvents. Sampling of Plant Tissues Has Proven Effective for Phytoforensic and Phytoscreening Applications in Assessing Sites and Evaluating the Efficacy of Phytoremediation. However, Little is Known About the Appropriate Exposure Times and Sampling Locations Required to Obtain an Accurate Assessment of TCE and Metabolites. in This Study, Hybrid Poplars …

Numerical Simulation Of Vortex-Induced Vibration Of Two Circular Cylinders Of Different Diameters At Low Reynolds Number, Ming Zhao, Guirong Yan

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Two-Degree-Of-Freedom Vortex-Induced Vibration (VIV) of Two Rigidly Coupled Circular Cylinders of Different Diameters at a Low Reynolds Number of 250 is Investigated Numerically. While the Diameter Ratio and the Mass Ratio Are Kept Constant, the Study is Focused on the Effect of the Position Angle of the Small Cylinder on the Lock-In Regime of the VIV. Simulations Are Carried Out for Position Angles Α of the Small Cylinder Ranging from 0° to 180° with an Interval of 22.5° and the Reduced Velocities Ranging from 1 to 15 with an Increment of 1. in Order to Find the Effect of the …

Directional Phytoscreening: Contaminant Gradients In Trees For Plume Delineation, Matt A. Limmer, Mikhil K. Shetty, Samantha Markus, Ryan Kroeker, Beth L. Parker, Camilo Martinez, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Tree Sampling Methods Have Been Used in Phytoscreening Applications to Delineate Contaminated Soil and Groundwater, Augmenting Traditional Investigative Methods that Are Time-Consuming, Resource-Intensive, Invasive, and Costly. in the Past Decade, Contaminant Concentrations in Tree Tissues Have Been Shown to Reflect the Extent and Intensity of Subsurface Contamination. This Paper Investigates a New Phytoscreening Tool: Directional Tree Coring, a Concept Originating from Field Data that Indicated Azimuthal Concentrations in Tree Trunks Reflected the Concentration Gradients in the Groundwater Around the Tree.To Experimentally Test This Hypothesis, Large Diameter Trees Were Subjected to Subsurface Contaminant Concentration Gradients in a Greenhouse Study. These Trees …

How Kaizen Group Leader Selection Affects Group Participation, M. Joleen Byerline

Masters Theses & Specialist Projects

Organizational communication research indicates group member participation increases as the legitimate power differences among group members decreases. Lean principles and practices indicate Kaizen Event members will contribute regardless of legitimate power levels, due to member training, education, and the Lean team-oriented culture. Further study is needed to determine if Lean culture and training maximize group member contribution, or if legitimate power levels in Lean environments manipulate participation. The focus of this case study is a central Kentucky Lean manufacturing organization that practiced Lean principles for at least three years and completed a Kaizen Event within twelve months previous to the …

Wind-Induced Torsion Vibration Of The Super High-Rise Building Of Shenzhen Energy Center, Feng Ruo-Qiang, Ye Jihong, Guirong Yan, Li Qing-Xiang, Yao Bin

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Synchronous Multipoint Scanning System Technique in Wind Tunnel Tests and Random Vibration Theory Method Were Used to Analyze the Wind-Induced Torsion Vibration of Some Irregularly Shaped Super High-Rise Buildings in Downtowns. the Torsion Vibration Modes and the Spectra of Torsion Wind Load Were Studied, and the Proportions of Mean Wind Torsion, Inertia Torsion and the Mass Eccentricity Torsion Caused by Horizontal Inertia Forces Are Discussed. the Following Conclusions Can Be Drawn. First, the Third and Fourth Modes Have Torsion Vibration Shapes, and their Frequencies Are in the High-Energy Area of the Spectra of the Torsion Wind Load; the Third …

Interdisciplinary Design - Forming And Evaluating Teams, Allen Estes, Brent Nuttall, Jill Nelson P.E., Margot Mcdonald, Gregory F. Starzyk Jd

Architectural Engineering

The College of Architecture and Environmental Design at California Polytechnic State University has offered an upper division, interdisciplinary experience for every student in the form of a project based, team oriented five unit studio laboratory. The course is now in its fifth year and requires small teams of architecture, engineering and construction students to complete the schematic level design of an actual building for a real client. The quality of the projects and student deliverables has been outstanding and students are clearly meeting the objective to prepare an integrated building design. The other course objective is to function as a …

A Structural Engineering Master's Program -- The Trials And Tribulations, Cole C. Mcdaniel, Allen Estes

Architectural Engineering

This paper is specifically intended for the advertised session in the CE Division on “current issues affecting graduate CE programs such as double dipping, accreditation of masters programs, combined MS/BS degree, research versus practice oriented masters degrees, etc.” California Polytechnic State University in San Luis Obispo (Cal Poly) is a predominately undergraduate university. Cal Poly has recently expanded master’s level graduate programs to support advanced education and faculty-student professional development opportunities. The Architectural Engineering Department in the College of Architecture and Environmental Design (CAED) started a structural engineering master’s degree program six years ago and has graduated five separate classes. …

Teaching Archtecture, Engineering And Construction Disciplines: Using Various Pedagogical Styles To Unify The Learning Process, Jill Nelson, John W. Lawson

Architectural Engineering

The Architectural Engineering Department at the California Polytechnic State University, San Luis Obispo (Cal Poly) teaches introductory sophomore level statics and mechanics of materials courses to students in three departments in the College of Architecture and Environmental Design. These courses are unique in that students in the Architectural Engineering Department share coursework with students in the Architecture and Construction Management Departments. While learning and problem solving in these multidisciplinary courses have many advantages, they also offer many challenges. The learning preference of the students in these three distinctly different disciplines requires a fresh approach to the course structure. The courses …

Rating Low Levels Of Ambient Noise In Performing Arts Facilities, Lily M. Wang, Brent A. Kraay

Durham School of Architectural Engineering and Construction: Faculty Publications

Previous studies have indicated that common indoor noise rating metrics, such as Noise Criteria NC and Room Criteria RC, do not best correlate to human perceptions of annoyance and distraction in typical office environments. Based on investigations conducted at the University of Nebraska using noise levels between 30 – 60 dBA, the author has proposed that an effective indoor noise rating method should begin with a rating of level (either dBA or sones), then an assessment of spectral quality, tones, and fluctuations. How well would such a system work at very low levels of ambient noise, though, as found in …

Quantifying The Just Noticeable Difference Of Reverberation Time With Band-Limited Noise Centered Around 1000 Hz Using A Transformed Up-Down Adaptive Method, Matthew G. Blevins, Adam T. Buck, Zhao Peng, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This study seeks to quantify the just noticeable difference (JND) of reverberation time (RT) using band-limited noise. ISO 3382-1 lists the JND of reverberation metrics at 5% based on work by Seraphim (1958). However, others have found the JND of RT to be higher from 6% to 39%. Many of these studies utilized band-limited stimuli, e.g. speech, music motifs and bandlimited noise. A previous study by the authors conducted on 30 subjects using white noise demonstrated a JND of RT at 22%. To further verify these results and investigate potential upward frequency masking, the present study was conducted following the …