Digital Commons Network^™

Graphene Oxides In Water: Characterization, Reactivity, And Application, Siyuan An

McKelvey School of Engineering Theses & Dissertations

Recently discovered, graphene and graphene oxide materials have drawn considerable research attention due to outstanding and novel properties, which underpin wide material potential for a number of advanced applications including supercapacitors, solar cells, sensors, catalysts, semiconductors, sorbents, and membranes, among others. Graphene oxides (GO), which are considered as a family of oxidized graphene materials (derivatives), is a key precursor to the synthesis of free-standing graphene via oxidation-exfoliation-reduction pathways. GO properties depend on the synthesis routes/conditions (i.e. derivatization), including partially maintaining graphene (i.e. sp2) properties. Further, oxygen-containing functionalities (epoxy, hydroxyl, carbonyl, and carboxyl groups) render GO hydrophilic – and correspondingly stability …

Decoding Complexity In Metabolic Networks Using Integrated Mechanistic And Machine Learning Approaches, Tolutola Timothy Oyetunde

McKelvey School of Engineering Theses & Dissertations

How can we get living cells to do what we want? What do they actually ‘want’? What ‘rules’ do they observe? How can we better understand and manipulate them? Answers to fundamental research questions like these are critical to overcoming bottlenecks in metabolic engineering and optimizing heterologous pathways for synthetic biology applications. Unfortunately, biological systems are too complex to be completely described by physicochemical modeling alone.

In this research, I developed and applied integrated mechanistic and data-driven frameworks to help uncover the mysteries of cellular regulation and control. These tools provide a computational framework for seeking answers to pertinent biological …

Cfd Modeling Of Smoke Movement In An Atrium, Robin Wu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this paper is to better understand the behavior of smoke movement in an atrium. Thus gives first responders and civilians in and out of building a better understanding

With the advancements of modern technology, computers and softwares make simulation models possible such as fire models to simulate fire and smoke movements. In this paper, a computational fluid dynamic (CFD) software Fire Dynamic Simulator (FDS) is used to conduct a series of atrium tests to investigate the effectiveness of smoke exhaust systems. FDS solves the Navier-Stokes equations appropriate for low speed flows (Ma < 0.3) with an emphasis on smoke, heat transport and CO2 concentrations from fires. The default turbulence model used in FDS simulation is the Large Eddy Simulation (LES), which is the solution of Navier-Stokes equations at low speed.

The compartment tested was 9 …

Enhanced Anticancer Activity Of 5'-Dfur-Pcl-Mpeg Polymeric Prodrug Micelles Encapsulating Chemotherapeutic Drugs, Alicia J. Sawdon, Jun Zhang, Xutu Wang, Ching-An Peng

Department of Chemical Engineering Publications

The compound 5’-deoxy-5-fluorouridine (5’-DFUR) is a prodrug of the anti-tumor drug 5-fluorouracil (5-FU). Thymidine phosphorylase (TP) is an enzyme that can convert 5’-DFUR to its active form 5-FU and the expression of TP is upregulated in various cancer cells. In this study, 5’-DFUR associated with amphiphilic copolymer poly(ε-caprolactone)-methoxy poly(ethylene glycol) (5’-DFUR-PCL-MPEG) was synthesized, characterized, and self-assembled into functional polymeric micelles. To demonstrate that the prodrug 5’-DFUR could convert into cytotoxic 5-fluorouracil (5-FU) by endogenous TP, HT-29 colorectal cancer cells were treated with 5’-DFUR-PCL-MPEG polymeric micelles for various time periods. Chemotherapeutic drugs doxorubicin (DOX) and 7-ethyl-10-hydroxycamptothecin (SN-38) were also encapsulated separately …

Laser Vaporization And Controlled Condensation (Lvcc): Graphene Supported Pd/Fe3o4 Nanoparticles As An Efficient Magnetic Catalyst For Suzuki Cross – Coupling., Hany A. Elazab Dr

Chemical Engineering

A reproducible, reliable, and highly efficient synthetic approach was implemented for synthesis of palladium nanoparticles supported on a binary composite of Fe3O4 and graphene (Pd-Fe3O4/G). This unique catalyst was tested for being used as a highly efficient active catalyst for being used in Suzuki cross – coupling reactions. It was found that this graphene supported Pd/Fe3O4 nanoparticles (Pd-Fe3O4/G) has a remarkable catalytic activity towards Suzuki coupling reactions. This catalyst could be recycled for up to three times with high catalytic activity. The catalyst was prepared using LVCC synthetic approach; the prepared catalyst was found to be highly magnetic which enabled …

Micro Reactor Technology: Flow Chemistry Impact On Applied Catalysis, Hany A. Elazab Dr

Chemical Engineering

The micro reaction technology has emerged over the past two decades as one of the promising synthetic tools that can create new horizons in many industrial and catalysis applications. There are many crucial issues that could simply be solved by adopting the approach of micro reaction technology. Those issues are including harmful environmental impact which could be minimized through integrated separation techniques and reagent recycling used in micro reactors. There are also other issues including kinetic, thermodynamic, and process safety concerns. Moreover, chemical manufacturing has been enhanced through running reactions in continuous mode using flow chemistry. This lead to a …

An Improved Method To Calculate Gas-Lift Valve Set Pressure And Valve Performance Curves, Khadhr A Kh Altarabulsi

LSU Doctoral Dissertations

The main objective of this work is toimprove the accuracy on calculations of design set pressure and performance curves (sizing equations) for Gas-Lift Valves (GLVs) at high pressure (real conditions). This improved calculation method is demonstrated to have an important effect on well unloading and production operations.

The analysis of the valve design set pressure includes an experimental evaluation of the effect of internal dome volume changes on the design set pressure due to the presence of silicone and thermal effects. The evaluationis carried out for different levels of GLV silicone fill, pressures and temperatures. Silicone fills covered 7.5, 10, …

Community-Scale Water Treatment Systems In The Dominican Republic, Jonathan Racey, Annabelle Papai, Elise Fischer, Becca Johnson

Engagement & Service-Learning Summit

Engagement and Service-Learning Summit: Reciprocal and Sustainable Partnerships

Exploring Large Pore Size Alumina And Silica-Alumina Based Catalysts For Decomposition Of Lignin, Sara Pourjafar, Jasmine Kreft, Honza Bilek, Evguenii Kozliak, Wayne Seames

Chemical Engineering Faculty Publications

Evaluation of copper doped silica-alumina and γ-alumina catalysts for lignin decomposition was conducted using a suite of chemical analysis protocols that enabled a comprehensive characterization of the reaction product. X-ray diffraction analysis was used to verify the concentration of doped copper on catalyst supports. Then, batch experiments were performed to study the significance of catalyst support type, catalyst dopant concentration, lignin concentration, catalyst-to-lignin ratio, reactor stirring rate and reaction time. Aqueous products were extracted with dichloromethane and analyzed using a detailed gas chromatography-mass spectrophotometry analytical protocol, allowing for quantification of over 20 compounds. Solid residues were analyzed by thermogravimetric analysis …

The Importance Of Usability Aspect In M-Commerce Application For Satisfaction And Continuance Intention, Yassierli Yassierli, Vinsensius Vinsensius, M. S. Syed Mohamed

Makara Journal of Technology

There has been a rapid growing of m-commerce application in recent years due to the development of mobile communication technology and e-commerce business. However, only about 30% of online users, who conduct online searching, make online purchases. The low conversion rate seems to be correlated with poor usability aspect of most m-commerce applications and poor satisfaction reported by users. Research has reported that satisfaction and continuance intention in using m-commerce applications have relationships with service quality and information quality. In this study, a new model of user satisfaction and continuance intention in the context of mobile application was proposed by …

Automated Compilation Test System For Embedded System, Mohamad Khairi Ishak, Ooi Jun Hwan, Teh Jiashen, Nor Ashidi Mat Isa

Makara Journal of Technology

Embedded system testing involves testing an integration of software and hardware. It is increasingly difficult to evaluate the functionality of each module within a short time because of the increasing number of tests required. In this paper, a novel stepwise methodology involving the use of an automated compilation test system (ACTS) is proposed, to improve the quality of testing and optimize the testing time using automation. Using the proposed method, the testing coverage can be maximized, while minimizing the manual work and testing time required. This ACTS was used to automate the test code compilation and execution for different hardware …

Transition Metal Dichalcogenide For High-Performance Electrode Of Supercapacitor, Saifful Kamaluddin Muzakir, Ahmad Salihin Samsudin, Bouchta Sahraoui

Makara Journal of Technology

Molybdenum dichalcogenides have been reviewed from the perspectives of bandgap, conductivity, and oxidation states of transition metal. Researchers have concluded that a narrow-bandgap transition metal dichalcogenide with high conductivity could be achieved for the high-performance electrode of a supercapacitor.

Ascorbic Acid Degradation In Cut Lemon Packaged Using Oxygen Scavenging Active Film During Storage, Kurniawan Yuniarto, Setyo Purwanto, Bruce Ari Welt, Anang Lastriyanto

Makara Journal of Technology

Oxygen scavenging active film can be used to prevent diffusion of free oxygen due to the action of permeation mechanism. In this study, biodegradable oxygen scavenging plastic film was designed by incorporating an antioxidant agent into plasticized polylactic acid or PLA-PEG (PPLA). Butylated hydroxytoluene (BHT) was added at different concentrations into the matrix of the PPLA film using a direct casting method to produce oxygen scavenging active film. The antiradical activity of the oxygen scavenging active film was observed, which could be applied for preventing vitamin C degradation in cut lemon during storage. The antiradical activity of the active film …

Activated Carbon Fixed-Bed Adsorber Design For Treating Chromium Hexavalent Wastewater, Tedi Hudaya, Velicia Rachmat

Makara Journal of Technology

Pollution caused by industrial wastewater containing heavy metals is a major issue, primarily due to its toxic nature. A cheap yet effective method to deal with such wastewater is activated carbon adsorption. The purpose of this research is to evaluate and design a fixed bed adsorber with granular activated carbon as an adsorbent to process wastewater-containing chromium hexavalent (Cr 6+). Experiments show that the Langmuir isotherm fits the equilibrium data as effectively as the Freundlich isotherm. Activated carbon used in this research is Jacobi 2000® derived from bituminous coal. The lab scale inlet volumetric flow is 100 mL/h with different …

Conversion Of Heat Energy From Cooling Water Of Diesel Engine To Electrical Energy Using Thermoelectric Generator, Muhammad Hasan Albana

Makara Journal of Technology

This research objective is to convert heat from the radiator fluid of a diesel engine to electrical energy by utilizing a thermoelectric generator (TEG). The TEG consists of 20 semiconductors (TE modules) and is equipped with a heat sink. The research shows that using the TEG, the heat of radiator fluid can be converted to electrical energy, although the electricity generated is small. The maximum electrical voltage generated by the TEG when modules were connected in series was 10 volts. When the TE modules were connected in parallel and series-parallel, the maximum voltages generated were 2.11 and 2.53 volts, respectively. …

A 2.3/3.3-Ghz Dual Band Low Noise Amplifier Using Switchable Load Inductor In 0.18-Um Cmos Technology, Taufiq Alif Kurniawan, Hsiao-Chin Chen

Makara Journal of Technology

In this paper, the dual band low noise amplifier is designed in 0.18-μm CMOS technology. By combining the proposed switchable load inductor for gain controlling and the conventional inductive source degeneration topology, narrow band gain and good impedance matching are achieved at 2.3/3.3-GHz frequency bands. The new mathematical analysis of low noise amplifier design is derived to define the component parameters of the proposed circuits. The proposed low noise amplifier exhibits gain of 17.18 dB and 15.5 dB, and noise figure of 2.67 dB and 2.52 dB at the two frequency bands, respectively.

Immittance Response On Carboxymethyl Cellulose Blend With Polyvinyl Alcohol- Doped Ammonium Bromide-Based Biopolymer Electrolyte, Norfatihah Mazuki, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

The blended carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) doped with various compositions of ammonium bromide (NH4Br)-based solid biopolymer electrolytes (SBEs) were prepared by using the casting method. In this present work, CMC/PVA–NH4Br SBE thin film was used to investigate the electrical conductivity via electrical impedance spectroscopy. The maximum conductivity obtained was 3.21 X 10−4 S cm−1 for sample AB20 at ambient temperature (303 K), and this result might be due to the increased number of charge carrier. A dielectric study was conducted to understand the conductivity behavior. The electrical properties have been measured as a function of frequency of …

Foam Materials With Controllable Pore Structure Prepared From Nanofibrillated Cellulose With Addition Of Alcohols, Jinbao Li, Te Song, Huijuan Xiu, Meiyun Zhang, Rui Cheng, Qiang Liu, Xuefei Zhang, Evguenii Kozliak, Yun Ji

Chemical Engineering Faculty Publications

Low-density foams based on nanofibrillated cellulose (NFC) made from Pinus massonianesoftwood pulp were prepared from NFC aqueous suspensions containing one of four C2–C4alcohols followed by freeze-drying, with the goal of controlling their pore structure and reducing the shrink rate. The foams prepared from NFC suspensions containing ethanol, isopropanol and n-butanol exhibited highly porous structures with a honeycomb-like cellular texture featuring well-defined “cell walls” between the layers. By contrast, the tert-butanol/NFC foam featured a higher number of smaller size pores with irregular shape. The foams prepared by freezing at −196 °C with ethanol also revealed small size pores, with no layered …

Decolorization Of Reactive Blue 4 Dye By Fenton Process Using Heterogeneous Fe/Sba-15 Catalyst, John C. Overton

Graduate Theses - Chemical Engineering

Remediation of textile wastewater, particularly concerning dyes, has been a longstanding concern. With the rise of more stringent regulations, the study of advanced methods of waste treatment is becoming necessary. The objective of this study was to synthesize and observe the use of a heterogeneous catalyst in a Fenton reaction by doping an SBA-15 catalyst support with iron. The catalyst was successfully synthesized, was easily filterable, exhibited resistance to acidic environments, and showed thermal stability. When used in a Fenton’s Reagent reaction setup, the single trial use of the catalyst achieved a final dye conversion of 86.8% at the optimal …

Preformed-Particle-Gel Placement And Plugging Performance In Fractures With Tips, Ze Wang, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed-particle gels (PPGs) have been applied for reducing excessive water production caused by fractures in reservoirs. A portion of the fractures existing in reservoirs is composed of a void part and a fracture tip. The PPG placement behavior and plugging performance could be mainly affected by the fracture tips. A fracture with a tip, called a "partially open fracture" in this paper, was designed to investigate the placement and water-plugging performance of PPG. Cylindrical sandstone cores were used to manufacture partially open fractures. Pressure data of PPG injection, post-gel water breakthrough, and stable injection were analyzed to investigate the PPG …

Experimental Study On The Influence Of Slickwater On Shale Permeability, Zhonghua Liu, Baojun Bai, Zheyu Zhang, Jing Tang, Shunpeng Zeng, Xiaogang Li

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

There are two diametrically opposite views of the influence of slickwater on shale permeability among scholars at home and abroad. We used the shale outcrops rock samples from the Lower Silurian Longmaxi Formation in Sichuan Basin. The permeability of these dry samples before and after immersion in different solution systems were tested by pulse attenuation method. The experimental results show that the impregnation of different slickwater components and standard salt solution can promote the increase of the permeability of shale samples. The stress sensitivity of shale samples after liquid immersion is medium weak to weak. The sample stress sensitivity is …

Large-Scale Non-Linear Dynamic Optimization For Combining Applications Of Optimal Scheduling And Control, Logan Daniel Beal

Theses and Dissertations

Optimization has enabled automated applications in chemical manufacturing such as advanced control and scheduling. These applications have demonstrated enormous benefit over the last few decades and continue to be researched and refined. However, these applications have been developed separately with uncoordinated objectives. This dissertation investigates the unification of scheduling and control optimization schemes. The current practice is compared to early-concept, light integrations, and deeper integrations. This quantitative comparison of economic impacts encourages further investigation and tighter integration. A novel approach combines scheduling and control into a single application that can be used online. This approach implements the discrete-time paradigm from …

Lipid Extraction From Spirulina Sp. And Schizochytrium Sp. Using Supercritical Co2 With Methanol, Shihong Liu, Husam A. Abu Hajar, Guy Riefler, Ben J. Stuart

Civil & Environmental Engineering Faculty Publications

Microalgae are one of the most promising feedstocks for biodiesel production due to their high lipid content and easy farming. However, the extraction of lipids from microalgae is energy intensive and costly and involves the use of toxic organic solvents. Compared with organic solvent extraction, supercritical CO₂ (SCCO₂) has demonstrated advantages through lower toxicity and no solvent-liquid separation. Due to the nonpolar nature of SCCO_2, polar organic solvents such as methanol may need to be added as a modifier in order to increase the extraction ability of SCCO₂. In this paper, pilot scale lipid …

Optimization-Based Spatial Positioning And Energy Management For Unmanned Aerial Vehicles, Ronald Abraham Martin

Theses and Dissertations

This research applies techniques from the field of optimization to spatial positioning and energy management in Unmanned Aerial Vehicles (UAVs). Two specific areas are treated: optimization of UAV view plans for 3D modeling of infrastructure, and trajectory optimization of solar powered high-altitude long-endurance (HALE) UAVs. Structure-from-Motion (SfM) is a computer vision technique for creating 3D models from 2D images. View planning is the process of planning image sets that will effectively model a given scene. First, a genetic algorithm based view planning approach is demonstrated. A novel terrain simulation environment is developed, and the algorithm is tested at multiple sites …

Removal Of Carbamazepine From Drinking Water, Thomas Krumpolc, Juan Rodriguez, Jordan Alex Gadberry, Zach Wiese, Paola Marrero-Rivera, Adam Johnson

Chemical Engineering Undergraduate Honors Theses

Due to the increasing prevalence of prescription medication over the past few decades, pharmaceuticals have accumulated in various water sources. This has become a public health concern because many pharmaceuticals have limited research on the effects of chronic low-level exposure. According to the World’s Health Organization (WHO), traces of pharmaceuticals products have been reported in different water sources such as surface waters, wastewater, groundwater, and drinking water.^[1] One pharmaceutical of interest that has been detected in water sources is carbamazepine. Carbamazepine (CBZ) is a common pharmaceutical prescribed for the treatment of seizure disorders, neuropathic pain, and various psychological disorders. …

Soy- Based Flexographic Ink For Linerboard Printing, Rahul Ramchandra Pingale

Masters Theses

Many printing inks use volatile solvents in the formulation, which are hazardous to the environment from emission of VOC’s and at the same time, synthetic resins in these inks are not biodegradable. These problems with the fluctuating and rising price of petroleum are main reasons to look for new resources for making more environmentally friendly printing inks. The majority of the commercially available water based inks are formulated based on using acrylic resins, synthetic colorants, solvents/water and additives, which are the common main components for formulating printing inks. In this research, soy proteins were tested for their suitability to partially …

Low Temperature Desiccants In Atmospheric Water Generation., Sunil Gupta

Electronic Theses and Dissertations

Surging global water demand as well as changes to weather patterns and over exploitation of natural water sources, such as ground water, has made potable water a critical resource in many parts of the World already – one rapidly heading towards a crisis situation. Desalination has been adopted as a solution – this is however energy intensive and impractical for most of the developing countries - those most in need of water. A renewable source of energy is solar thermal and solar photovoltaic. A plentiful source of water is the humidity in the atmosphere. This research is to push the …

Characterization Of Microreactor And Analysis Of Carbonyl Compounds In Exhaled Breath., Qi Li

Electronic Theses and Dissertations

Analysis of trace volatile organic compounds at parts per billion (ppbv) to parts per trillion (pptv) level has become an important research frontier because of the applicability for environmental monitoring and noninvasive diagnosis of diseases. The methods of preconcentration for detection of trace aldehydes and ketones both in ambient air and human exhaled breath have increased considerably over the last decade. However, the majority of these methods are not efficient. In this dissertation, we have improved an innovative microreactor that is suitable for quantitative analysis of volatile carbonyl compounds (VOCs) in ambient air as well as in human exhaled breath. …

Removal Of Carbamazepine From Drinking Water, Adam Johnson, Thomas Krumpolc, Jordan Gadberry, Juan Rodriguez, Paolo Marrero-Rivera, Zachary Wiese

Chemical Engineering Undergraduate Honors Theses

Due to the increasing prevalence of prescription medication over the past few

decades, pharmaceuticals have accumulated in various water sources. This has become a

public health concern because many pharmaceuticals have limited research on the effects

of chronic low-level exposure. According to the World’s Health Organization (WHO),

traces of pharmaceuticals products have been reported in different water sources such as

surface waters, wastewater, groundwater, and drinking water.[1] One pharmaceutical of

interest that has been detected in water sources is carbamazepine. Carbamazepine is a

common pharmaceutical prescribed for the treatment of seizure disorders, neuropathic

pain, and various psychological disorders. It’s mechanism …

Removal Of Carbamazepine From Drinking Water, Juan Rodriguez, Tom Krumpolc, Adam Johnson, Paola Marrero-Rivera, Alex Gadberry, Zach Wiese

Chemical Engineering Undergraduate Honors Theses

Due to the increasing prevalence of prescription medication over the past few decades, pharmaceuticals have accumulated in various water sources. This has become a public health concern because many pharmaceuticals have limited research on the effects of chronic low-levelexposure. According to the World’s Health Organization (WHO), traces of pharmaceuticalsproducts have been reported in different water sources such as surface waters, wastewater, groundwater, and drinking water.[1] One pharmaceutical of interest that has been detected in water sources is carbamazepine. Carbamazepine (CBZ) is a common pharmaceutical prescribedfor the treatment of seizure disorders, neuropathic pain, and various psychological disorders. It’s mechanism of action …