Open Access. Powered by Scholars. Published by Universities.®

Articles 211 - 240 of 371

Full-Text Articles in Public Policy

Ddasaccident412, Hd-Aid Jun 2004

Ddasaccident412, Hd-Aid

Global CWD Repository

The deminer was working in his clearance lane using a heavy rake to excavate the ground. The ground was very hard and use of the light rake was limited. At approximately 08:55hrs an explosion occurred under the rake.”


Ddasaccident545, Hd-Aid May 2004

Ddasaccident545, Hd-Aid

Global CWD Repository

On May 19, 2004 all deminers were called back to restart clearance operations on the minefield 603 in Darlaman after the first 10 minutes break. [The Victim] also went to his lane and started operations. Using the mine detector he found a signal and marked the area by a red marker. He was setting in kneeling position in an up hill and sloppy [sloping] portion of the field and while he had his personal protective suit and visor on started to prod the area using a bayonet and during the prodding he touched the mine and it went off.


Ddasaccident530, Hd-Aid Mar 2004

Ddasaccident530, Hd-Aid

Global CWD Repository

Details of this accident have been withheld by the demining NGO that employed the Victim. A spreadsheet including the Victim’s name and very brief details of the accident was made available in 2007. Some detail can be inferred from the information made available. For example, the fact that six people were injured during excavation of a small AP blast mine implies that safety distances were being ignored and field discipline was low. The main Victim also suffered head injuries that indicate that his head protection and visor were not being worn.


Ddasaccident411, Hd-Aid Feb 2004

Ddasaccident411, Hd-Aid

Global CWD Repository

The deminer was working in his clearance lane using a heavy rake to excavate the ground. The ground was very hard and use of the light rake was limited. At approximately 0710hrs an explosion occurred under the rake. The deminer was not wearing his visor correctly and as a result incurred facial injuries as outlined below.


Ddasaccident385, Hd-Aid Oct 2003

Ddasaccident385, Hd-Aid

Global CWD Repository

Then the MCC made its first that pass on the East side of the T55 (and as its cultivator attachment began to pass alongside the T55 turret) there was a detonation.


Ddasaccident439, Hd-Aid Oct 2003

Ddasaccident439, Hd-Aid

Global CWD Repository

Narrative: The deminer [Name excised] was carrying out one man one lane manual demining drills in accordance with [Demining group] Sri Lanka manual demining SOPs for 100% excavation. He was using the axe hammer tool to excavate the face of his lane down to a depth of 15cm, when the detonation occurred. The mine detonated on the left hand side of his lane as he was using the axe hammer.


Ddasaccident518, Hd-Aid Oct 2003

Ddasaccident518, Hd-Aid

Global CWD Repository

Details of this accident have been withheld by the demining NGO that employed the Victim. A spreadsheet including the Victim’s name and very brief details of the accident was made available in 2007. Some details can be inferred from the information released. For example, the limited injury implies that the victim’s PPE was being worn in the correct manner.


Ddasaccident386, Hd-Aid Sep 2003

Ddasaccident386, Hd-Aid

Global CWD Repository

On the 16th of September 2003 at 12:04 hours the Armoured Grader, assisting in route clearance operations on the road from Chiede to Malungo wa Shikongo, set off an anti-tank mine.


Ddasaccident398, Hd-Aid Aug 2003

Ddasaccident398, Hd-Aid

Global CWD Repository

As he excavated closer to the position of the signal he stopped and swept again with the detector. After again, pinpointing the signal he continued the excavation drill where upon a short time later there was a detonation at 0707 hrs.


Ddasaccident396, Hd-Aid Feb 2003

Ddasaccident396, Hd-Aid

Global CWD Repository

At approximately 1125hrs, Team Leader [name excised] gave an order to stop work, as he was preparing to dispose the previously located mines and he required all the Deminers to retire to the safe area. On hearing the signal to stop work, [the Victim] then continued to probe around the mine in an attempt to identify the body perimeter of the mine, when there was an uncontrolled detonation.


Ddasaccident393, Hd-Aid Sep 2002

Ddasaccident393, Hd-Aid

Global CWD Repository

[The Victim] then excavated around the front and right hand side of the rock using his right hand, nothing being located. As it would have been difficult to excavate around the left hand side of the rock using his right hand he swapped hands and started to excavate using his left hand, (something that [the Victim] regularly does). [the Victim] had excavated approximately 15 cms in depth when there was an uncontrolled detonation.


Ddasaccident463, Hd-Aid Sep 2002

Ddasaccident463, Hd-Aid

Global CWD Repository

Details of this accident have been withheld by the demining NGO that employed the Victim. A spreadsheet including the Victim’s name and very brief details of the accident was made available in 2007. Some details can be inferred from the information released. For example, the injury implies that the victim’s visor was not being worn in the correct manner, and the loss of one eye and severe injury to the other implies a severe facial injury.


Ddasaccident382, Hd-Aid Jul 2002

Ddasaccident382, Hd-Aid

Global CWD Repository

On the day of the accident a [1st commercial demining group] Deminer was conducting manual clearance in a clearance lane next to a row of No.4 mines. While using the demining trowel to scratch small pieces of gravel away from one No.4 mine, it detonated.


Ddasaccident383, Hd-Aid Jul 2002

Ddasaccident383, Hd-Aid

Global CWD Repository

He had excavated approximately 15 cms towards the initial signal and 5 cms in depth when he came to a rock, he then continued to excavate down when the uncontrolled detonation occurred.


Ddasaccident381, Hd-Aid Jun 2002

Ddasaccident381, Hd-Aid

Global CWD Repository

The Deminer then started to excavate the right hand signal, starting 20cms back from the signal source. He had excavated approximately 12 – 15 cms in distance from the signal, at a depth of 18 cms, with the width of the excavation trench being approximately 20cms wide before the uncontrolled detonation occurred.


Ddasaccident391, Hd-Aid May 2002

Ddasaccident391, Hd-Aid

Global CWD Repository

At the time of the accident [Demining group] Manual Clearance Team No3 were operational on the Southern sector of M/F 147 clearance site, at Bayt Yahun. At approximately 1200 hrs an uncontrolled detonation occurred in the clearance lane.


Ddasaccident384, Hd-Aid Apr 2002

Ddasaccident384, Hd-Aid

Global CWD Repository

On 18th Apr 2002 one of our deminers activated a small AP mine while he was excavating the ground. The deminer had excavated almost half of the lane along the base stick when the explosion happened.


Ddasaccident370, Hd-Aid Sep 2001

Ddasaccident370, Hd-Aid

Global CWD Repository

The Victim was working on a slope and the initial blast caused him to fall backwards and roll a little way down the hill. The team leader witnessed the explosion and then assisted the Victim to the rest area where they then awaited the arrival of the team medic. [The control group] was notified of the accident and a helicopter CASEVAC was requested. When the medic arrived he applied first aid treatment to his eyes. He was then assisted to the helicopter winch area by the medic and the remainder of the team and awaited the arrival of the CASEVAC …


Ddasaccident370, Hd-Aid Sep 2001

Ddasaccident370, Hd-Aid

Global CWD Repository

On the day of the accident at approximately 11:45hrs, the Victim was commencing a clearance lane up the side of a hill. He was investigating a reading from his metal detector by prodding, and was in the kneeling position at the time. Whilst prodding he detonated a PMA3 anti-personnel blast mine.


Ddasaccident440, Hd-Aid Sep 2001

Ddasaccident440, Hd-Aid

Global CWD Repository

HALO Sri Lanka manual demininG SOPs for 100% excavation. He was using the axe hammer tool to excavate the face of his lane down to a depth of 15cm when the detonation occurred. The mine detonated on the left hand side of his lane as he was using the axe hammer.”


Ddasaccident501, Hd-Aid Sep 2001

Ddasaccident501, Hd-Aid

Global CWD Repository

At approx. 0855 Hrs on Tuesday 11th September 2001 the deminer [the Victim] was fatally injured while performing manual demining duties for [International demining NGO]. The accident was caused by the accidental detonation of Pt Mi Ba III anti-tank mine. It should be noted that the casualty had been accepted to participate in the next Team Leaders course. At the commencement of the shift he was congratulated by all members of GS8 for being accepted for a demining team leader course. He was extremely happy on the day of the accident. He was married with one child and had no …


Ddasaccident311, Hd-Aid Aug 2001

Ddasaccident311, Hd-Aid

Global CWD Repository

The victim was conducting a “full-excavation” drill wearing a protective vest (RBR), a full-face visor with headband, and gloves. He was using a gardening tool/hand trowel and as he worked, he activated an M14 mine with the trowel.


Ddasaccident374, Hd-Aid Jul 2001

Ddasaccident374, Hd-Aid

Global CWD Repository

At approximately 08:40 hrs whilst Deminer [name excised] was either investigation a previously identified signal with his probe, or attempting to move a rock with his probe, an uncontrolled detonation of a PMA-3 anti-personnel blast mine occurred.


Ddasaccident462, Hd-Aid Jul 2001

Ddasaccident462, Hd-Aid

Global CWD Repository

Mine exploded during excavation


Ddasaccident306, Hd-Aid Jun 2001

Ddasaccident306, Hd-Aid

Global CWD Repository

The victim was squatting while carrying out a “full excavation clearance” drill in the lane. He was using an unauthorised digging tool when he detonated a VS50 anti-personnel mine. The excavation tool is use was a Garden Trowel. The excavation tool was being used in a pushing motion rather than a scraping motion.


Ddasaccident400, Hd-Aid Jun 2001

Ddasaccident400, Hd-Aid

Global CWD Repository

The deminer [the Victim] whilst excavating in a clearance lane, detonated a PMA3 anti-personnel blast mine. At the time of the accident he was using his excavating tool, and in the process of using this tool he detonated the mine.


Ddasaccident332, Hd-Aid May 2001

Ddasaccident332, Hd-Aid

Global CWD Repository

The Victim had just replaced his partner after 30 minutes rest. His metal detector gave 5 readings within a metre of the mine (which was “normal” for this field). The accident occurred while the Victim was prodding using a bayonet on a hillside in a grassy part of the minefield.


Ddasaccident371, Hd-Aid Apr 2001

Ddasaccident371, Hd-Aid

Global CWD Repository

At approximately 10:55hrs an uncontrolled detonation occurred in the search and clearance block (9m south of the Northerly base line and 13m West of the Easterly red/white area marking rope).


Ddasaccident205, Hd-Aid Apr 2001

Ddasaccident205, Hd-Aid

Global CWD Repository

On Wednesday 04 April 2001 at 1025 hours, [Demining group] deminer [the Victim] accidentally detonated an R2M2 anti-personnel landmine whilst working in minefield H186 (Fazenda Usoque) approximately 12 km north of Huambo. He escaped “virtually unscathed”.


Ddasaccident358, Hd-Aid Feb 2001

Ddasaccident358, Hd-Aid

Global CWD Repository

The deminer was conducting manual clearance utilising full excavation drills. At 09:15 he was excavating the front right comer of his lane he initiated what is believed to be a V550.