Open Access. Powered by Scholars. Published by Universities.®
Public Affairs, Public Policy and Public Administration Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Publication Year
- File Type
Articles 61 - 90 of 849
Full-Text Articles in Public Affairs, Public Policy and Public Administration
Ddasaccident606, Hd-Aid
Ddasaccident606, Hd-Aid
Global CWD Repository
On Saturday 02 October 2010 at approximately 10:00am a [Civil Contractor] grader struck an AT mine approximately one meter from the road center-line whilst carrying-out maintenance on the Juba to Nimule Road. The grader operator suffered serious injuries as a result of the blast. He was evacuated to a hospital in Juba, stabilized and then as he was from Uganda he was evacuated the following day to Kampala for further treatment. The grader operator later died from his injuries 20 October in Kampala.
Ddasaccident703, Hd-Aid
Ddasaccident703, Hd-Aid
Global CWD Repository
The deminer was working in the centre lane in the main minefield 346 and he recovered 6 M14 APs. At 12:15 hrs he started to approach AP M14 and he located one cluster then he moved to the next one, and while he was conducting visual check stage, he did not follow the proper procedure to remove the grass ,instead of using grass cutter to remove the grass he used his bared hand to pull the grass which accidentally caused the blast.
Ddasaccident640, Hd-Aid
Ddasaccident640, Hd-Aid
Global CWD Repository
According to the witness statements and the physical observation of the accident point, the accident happened while the de-miner was walking from the rest area to his clearance lane. He stepped on missed PMN anti-personnel mine in cleared area. Therefore, this mine was missed during the clearance operation. The exploded mine resulted in below knee amputation of deminer’s right leg, multiple injuries on his left leg, left foot heel, right hand palm and some minor injuries on his right arm. The de-miner was sent to Khost hospital after receiving first aids in the site. While accident happened the de-miner did …
Ddasaccident655, Hd-Aid
Ddasaccident655, Hd-Aid
Global CWD Repository
Deminer was approaching 9 O’clock M35 AP mine on one of the main mine belt clusters, after she removed the AT mine she located the M35 mine and started to excavate beside the mine, accidently she hit the mine by the heavy rake and caused the blast
Ddasaccident759, Hd-Aid
Ddasaccident759, Hd-Aid
Global CWD Repository
On 06 Sep 2010, when Mr. [the Victim] was working in his clearance lane and excavated a detected signal, during the excavation drill his excavation tool touched the mine and caused it to go off. According to investigation report the cause of the accident was the wrong excavation technique, as he started excavation drill close to the pinpointing target. He had gone down and did not expand the trench to allow entry from the side, which caused to stroke his excavation tool on the top of the mine. Due to the injuries sustained on his eyes, it seems that the …
Ddasaccident693, Hd-Aid
Ddasaccident693, Hd-Aid
Global CWD Repository
While the deminer was clearing an area assigned to him by the team leader and after he recovered an AT Saci mine he entered the contaminated hazardous area trying to locate the AP M14 12 o’clock mine with out following the SOP and the proper procedure , then he stepped on a non cleared area and activated the M14 which caused a badly injured to his left foot.
Ddasaccident730, Hd-Aid
Ddasaccident730, Hd-Aid
Global CWD Repository
On 17 August 2010 Mr. [the Victim] the deminer was working in his clearance lane excavating a detected signal, his excavation tool touched a mine and caused it to explode. According to the investigation report the signal was not pinpointed correctly and the de-miner has used his bayonet directly on the top of anti-personnel mine, so the accident happened. Unfortunately the victim deminer was not fully dressed with PPE, so he got severe injuries on his eyes, whole face and finger of his left hand.
Ddasaccident729, Hd-Aid
Ddasaccident729, Hd-Aid
Global CWD Repository
On 17 August 2010 while [the Victim] was working in his clearance lane, his excavation tool touched a mine and caused it to go off. According to the investigation report and the injuries sustained by victim deminer, it seems that the de-miner has excavated a detected signal carelessly and in contrary to their SOP. It means signal was not pinpointed correctly and the de-miner had used the excavation tool directly on the top of mine, so the accident happened. Unfortunately the de-miner did not put his PPE on, therefore, he got severe injuries on his eyes, whole face, neck, chest, …
Ddasaccident659, Hd-Aid
Ddasaccident659, Hd-Aid
Global CWD Repository
The incident happened while the deminer trying to investigate a signal using the heavy RAKE. The deminer was close to the mine and the distance was less than the RAKE handle 2.2 m that the area very sloppy (water course) and the deminer was looking for the missing mines.
Ddasaccident658, Hd-Aid
Ddasaccident658, Hd-Aid
Global CWD Repository
On 15 August 2010 while [the Victim] deminer was busy in his clearance lane excavating a detected signal, his excavation tool touched a mine and caused it to explode. According to the investigation report the signal was not pinpointed correctly and the deminer has used his excavation tool directly on the top of anti-personnel mine and the accident happened. Fortunately the victim deminer was fully dressed with PPE, so he got a superficial injury between the thumb & index finger of his right hand.
Ddasaccident799, Hd-Aid
Ddasaccident799, Hd-Aid
Global CWD Repository
The accident occurred in (NR 205) on the 13th August 2010 in a cleared mine field (?) in Al Lafa Kassala where a tractor driver was injured by an Anti-Tank (AT) PRB 35 mine whilst cultivating an area of land that had been released through full manual clearance by [Demining group]. The tractor driver suffered injuries to his upper and lower right limbs.
Ddasaccident650, Hd-Aid
Ddasaccident650, Hd-Aid
Global CWD Repository
On 13th August 2010 an Al Lafa, Kassala farmer was ploughing his field by tractor at approximately 2300hrs, when he detonated an antitank mine. The left rear tyre was destroyed, luckily he survived with surprisingly minor injuries. After some initial confusion as to whether the mine was or was not in a cleared area (perhaps a data reading error) and a preliminary investigation, it was established that the site had been previously cleared. BOI 2010/03 was initiated to determine the facts and make recommendations to the mineaction community.
Ddasaccident737, Hd-Aid
Ddasaccident737, Hd-Aid
Global CWD Repository
It was 07:10 AM on 14 July 2010 while an anti-vehicle mine exploded under the back tyre of [Demining group] MDU-04 FEL machine during the ground processing operation. Fortunately no casualty is involved in this incident; only one tyre and a wheel were destroyed by the explosion. The main objective of MDU support to [Other demining group] DT was the possibility of deeper mines due to extra soil and gravel brought by seasonal floods in the site. Therefore, the depth of mines should have been expected more than default. This was the main issue which had not been considered by …
Ddasaccident644, Hd-Aid
Ddasaccident644, Hd-Aid
Global CWD Repository
The incident happened due an individual mistake while the deminer investigating an indicated signal by the metal detector in the predicted site of the AP mine within the cluster. The deminer mis approach the mine and hit it from the top which caused the heavy RAKE to press the pressure plate and activated the mine about 2m from the deminer (the length of the RAKE handle). This the second incident with the same deminer and the same scenario.
Ddasaccident750, Hd-Aid
Ddasaccident750, Hd-Aid
Global CWD Repository
On 10 July 2010 at 09:15 AM Mr. [the Victim] the de-miner of mentioned team was working in his clearance lane, excavating a detected signal, his pick touched on the top of a PMN 2 anti-personnel mine and caused it to go off. According to the investigation report the de-miner has used the pickaxe to investigate the signal instead of the bayonet and it seems as he used the pick directly on the top of signal, so caused the accident. Luckily the deminer was fully dressed with PPE, so he got a superficial injury on hand. Then the victim de-miner …
Ddasaccident758, Hd-Aid
Ddasaccident758, Hd-Aid
Global CWD Repository
On 7th July 2010 at 08:30 KAB 174 Rippers FEL of [Demining group] MDU-05 started ground processing operations in MF 0351, supporting MDG-20 in their clearance operations. During this operation a P2MK2 anti-vehicle mine exploded on its right back tyre and caused damages to it and its wheel. Fortunately there is no any casualty involved in this incident. According to the investigation report, this MDU started operations from the safe area and gradually proceeded into the MF, on the way back to safe area, the machine entered in un-cleared area, initiated a mine and caused incident. The machine operator was …
Ddasaccident763, Hd-Aid
Ddasaccident763, Hd-Aid
Global CWD Repository
According to the investigation reports, the accident occurred on 05 July at 10:00 during the break time of the team. The deminer [the Victim] left his clearance lane after the break started, and walked ahead around 100 meters towards the mountain top, where the boundary lane of Task # 0033 was located. He was carrying a saw and wanted to cut a shovel or axe handle there from the trees. But the area was mined and he knew about that. Around one metre away from the boundary lane of MF 0033, he started to cut a shovel or axe handle, …
Ddasaccident767, Hd-Aid
Ddasaccident767, Hd-Aid
Global CWD Repository
The team started operations on 05:30 at the morning, everyone received briefing from the team leader. MU-07 was implementing a regime of 30 minutes work and 10 minutes break in this area, as it is a difficult and steep sloping task. It was 08:15 that the deminer [Victim No.2] detected a signal in his clearance lane and then identified that it was a POMZ mine after discovering a part of it. He called his team leader that he has found a POMZ mine and partially discovered it. During the investigation, he initiated the mine, causing it to detonate and the …
Ddasaccident587, Hd-Aid
Ddasaccident587, Hd-Aid
Global CWD Repository
On the 22nd of June 2010 an uncontrolled detonation occurred at [Name of demining group removed] task site DA-SR-3948 in Central Equatoria within the confines of the control point. The detonation fatally injured the team medic and minor injuries were sustained to one of the team deminers’ who was in close proximity to the seat of explosion. For additional information regarding this BOI and full report see reference D [Not made available].
Ddasaccident718, Hd-Aid
Ddasaccident718, Hd-Aid
Global CWD Repository
The accident occurred on 22 June 2010, 09:30 AM in clearance lane of [the Victim], located in a steep sloping area within the MF. He was busy in full excavation there, suddenly some stones and soil slipped down in front of him and caused a PMN2 mine to go off. The ground where [the Victim] was working was of a loose and sliding nature, so it slipped down and directly hit the mine and caused the accident. So this was an unpreventable accident in nature, but as it seems from the location and severity of injuries, the visor was not …
Ddasaccident676, Hd-Aid
Ddasaccident676, Hd-Aid
Global CWD Repository
While the deminer try to investigate a signal indicated by the metal detector in an expected site of an AP M14 mine, the deminer didn’t approach the signal in the proper procedure and hit the mine with the heavy Rake on the pressure plate which activated the mine and caused the blast 200 away from the deminer
Ddasaccident728, Hd-Aid
Ddasaccident728, Hd-Aid
Global CWD Repository
On 17 June 2010 at 11:00 [the Victim] was busy in his clearance lane in a steep sloping area, he lost his balance, got out from his clearance lane to unclear ground, stepped on a YM-I mine and the accident happened. According to the investigation report the team is walking around one and half hours from the base comp to the MF on daily basis which makes the deminers tired. The marking signs in clearance lane were weak and even not distinguishable; the gritty and sliding nature of the ground is another risk factor in this specific minefield. Extra safety …
Ddasaccident664, Hd-Aid
Ddasaccident664, Hd-Aid
Global CWD Repository
On 10 of June 2010 the first day of operation in task 0040, all the team members had been briefed by team leader about the location and extent of contamination in the area. The deminers were tasked to establish admin. parking areas, control marking and create the baseline. The team members also started clearance operations in some lanes and the deminer [the Victim] was tasked to follow the marking of already cleared lanes. But because of the break time he left the area and entered into the task seeking a shadow to take break there. He wanted to enter to …
Ddasaccident597, Hd-Aid
Ddasaccident597, Hd-Aid
Global CWD Repository
The primary cause of this accident is listed as “Inadequate survey” because there seems to have been confusion about the area that required search. The secondary cause is listed as a “Management Control Inadequacy” because the failure to search the areas that were very obviously hazardous appears to have been the result of poor communication, a lack of adequate task documentation, a failure to keep MDD working records, poor understanding of Technical Survey, and other “shortcuts” that commercial demining groups may be expected to make when inadequately tasked.
Ddasaccident749, Hd-Aid
Ddasaccident749, Hd-Aid
Global CWD Repository
On 09:05 during the break time [the Victim] entered into the hazard area in order to proceed to a mosque located inside the AIF to get his break there. Unfortunately one metre away from the gate of mosque he stepped on an IED and caused it to detonate which resulted in a fatal accident. According to the statements of team leader and deputy team leader, they were busy with measuring Turning Points and tasking of the deminers in their clearance lane. After 5 minutes the deputy team leader and paramedic arrived to the site, cleared a lane towards the accident …
Ddasaccident747, Hd-Aid
Ddasaccident747, Hd-Aid
Global CWD Repository
Deminers reported that the Victim was in a particularly happy mood that day. The Victim went to the grenade without telling anyone and began to dismantle it. His actions can be reliably inferred because the black cap of the grenade was undamaged at the site (and featured in the first site photographs after the accident). So it seems that the Victim got some way into the grenade before it went off in his hands. Severe hand (amputated fingers), arm, and upper body injury resulted - with bubbling blood and air from open chest wounds. From this it is inferred that …
Ddasaccident594, Hd-Aid
Ddasaccident594, Hd-Aid
Global CWD Repository
On 04 May 2010 at 08:45 am while [the Victim] the de-miner was excavating a detected signal in his clearance lane, his bayonet hit top of an anti-personnel PMN mine and caused it to go off. According to the investigation report, it seems that the de-miner started excavation directly from the pinpointed spot with his bayonet and caused the explosion and accident. Unfortunately improper use of PPE caused catastrophic injuries to the face and eyes of the victim deminer. He has lost his right eye, traumatic amputation of right-hand fingers and sustained some superficial injures on different parts of his …
Ddasaccident589, Hd-Aid
Ddasaccident589, Hd-Aid
Global CWD Repository
The team leader [the Victim] was doing a QA check on one of the Foot Track already cleared by the deminer. Out of five mines laid only one M14 AP mine has been recovered from this FT. The team leader was trying to recheck the cleared area again with the metal detector trying to find the missing mine, during his QA check he stepped on one deep buried M14 AP mine in the area which has been already checked by the deminer and Team Leader.
Ddasaccident595, Hd-Aid
Ddasaccident595, Hd-Aid
Global CWD Repository
On 9th April 2010 at 10:27 while [the Victim] was working in his clearance lane, busy in excavation drill, the accident happened and caused severe injuries to his right hand (traumatic amputation) and some minor injuries to his neck and nose. His visor was broken down and separated from headband. As per the investigation report, the deminer has breached the SOPs as dug directly down on top of the mine. It is also possible that he tried to work in a bit hurry to increase the progress. As he was fully dressed with PPE, therefore, remained save from other severe …
Ddasaccident625, Hd-Aid
Ddasaccident625, Hd-Aid
Global CWD Repository
We took the safety brief before we start working from the team leader then we entered the field, through the 1st period of work I cleared 3 AP mines from the mixed cluster (AP, AT) in Jaber 1 area, on the 2nd period at 9:11 am I cleared a 3 o’clock mine then moved to 9 o’clock mine, while searching I heard a signal and marked it then looked for it using the light rake but because it’s a hard stony area I used the heavy rake then, while progressing 15 cm from the right side I pulled the rake …