Fluid Dynamics Commons^™

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

From Code To Cube: Interactive Fluid Simulation With Real Time Motion Control, Dominic Ziccardi, Carter Groezinger

Discovery Day - Daytona Beach

This research project explores the use of FluidX3D, an open-source lattice Boltzmann method (LBM) solver, to simulate fluid behavior within a three-dimensional cube container. The system supports both standard water models and rheoscopic fluid visualization, allowing detailed observation of complex flow dynamics in real time. The simulation accurately represents fluid motion, gravity-driven behavior, and rotational response within a bounded cubic domain. The longterm objective is to extend this digital simulation into a physical installation consisting of six synchronized square displays arranged to form a cube. This configuration will create a volumetric illusion of fluid occupying a tangible, handheld structure. An …

Extending The Essentially Entropic Lattice Boltzmann Method To Three-Dimensional Turbulent Flows, Michael Derderian

Discovery Day - Daytona Beach

The Entropic Lattice Boltzmann Method (EELBM) has demonstrated strong numerical stability and accuracy for two-dimensional simulations, particularly at higher resolutions where the entropic formulation introduces only minimal stabilizing turbulent viscosity and eventually converges to the Lattice Bhatnagar–Gross–Krook (LBGK) formulation. This built-in stabilization can be interpreted as an implicit large-eddy simulation (LES) model, allowing EELBM to capture complex turbulent behavior without requiring explicit subgrid-scale closures. While these advantages have been thoroughly validated in 2D, understanding how the entropic constraint regulates dissipation in three dimensions is essential for assessing EELBM’s suitability for practical, turbulence-dominated applications. This work focuses on the development and …

Navier Stokes Pressure Drop Derivation, Brayden Benedetti, Gedaliah Dimbert, Jaden Turobiner

Discovery Day - Daytona Beach

Accurate prediction of pressure losses in propellant and fluid feed systems is essential for reliable design and operation of aerospace and industrial flow networks. This project presents a systematic derivation of a practical pressure drop calculator for a feed system using isopropyl alcohol, beginning from the fundamental conservation laws and culminating in an engineering-level computational model. Starting with the differential form of the Navier–Stokes equations for incompressible flow, the governing equations are simplified through a series of physically justified assumptions, including steady-state flow, negligible body forces, and fully developed internal flow within circular piping. The resulting momentum balance is reduced …

Application Of Navier Stokes In Cfd, Hayden Kerkhoff, Gavin Palmer, Garret Seckinger

Discovery Day - Daytona Beach

This project investigates the use of 2-Dimensional Computational Fluid Dynamics (CFD) to analyze aerodynamic behavior, then compare data with the numerical solution of the Navier–Stokes equations run by MATLAB. By leveraging open‑source and possible industry CFD platforms—including OpenFOAM and commercial solvers such as ANSYS Fluent and Inventor Professional—the study evaluates how computational methods simulate, optimize, and predict key aerodynamic quantities such as lift, drag, stall angle, and Reynolds number.   The project focuses on modeling an airflow over specific parameters, such as different angles of attacks and ISA Atmospheric Conditions. Parametric variations in density, angle of attack, chord length, and temperature …

Motion With Air Resistance, Gauge Mccain, Jacob Bealefeld, Francesca Wise

Discovery Day - Daytona Beach

The motion of objects moving through air is influenced not only by gravity but also by air resistance, which affects the speed and acceleration of the object over time. This project examines the motion of a falling object by modeling it with an ordinary differential equation that accounts for both gravitational force and a resistive drag force proportional to velocity. Using Newton’s Second Law, a first-order differential equation is derived to describe how the velocity of the object changes as it falls. The solution of this equation demonstrates how the velocity increases initially and gradually approaches a constant value known …

Simulations Of Phugoid Motion Of Jal 123, Dereth J J. Drake Scheuermann

Georgia Journal of Science

Airplanes rely on a balance between the four forces of flight: lift, weight, thrust, and drag. If these forces are balanced, the airplane will remain stable. However, if structurally or systematically compromised, the motion can rapidly become unstable. In the aviation industry, mistakes in repairs and aircraft design can lead to accidents causing the loss of life in some cases. In this article, we will be analyzing what happened 70 Japan Airlines flight 123 and how the flight’s motion deteriorated due to a defective repair. More specifically, we will discuss the aerodynamic effects of phugoid motion and how it developed …

Global Time-Resolved Measurements Of Inlet/Isolator Unstart Induced By Mass Injection, Andrew N. Bustard, Benjamin L. Bemis, Aaron Marques, Matthew J. Zahr, Thomas J. Juliano

Publications

The inner surface pressure of an axisymmetric inlet/isolator model was measured using anodized-aluminum pressure-sensitive paint (PSP) viewing through cast acrylic. Temperaturesensitive paint was utilized to correct for the PSP’s temperature sensitivity. The model was tested under Mach 5.7 flow at 𝑹𝒆 = 7.1 ×106 /m under conventional noise conditions. Transverse jet injection with jet-to-inlet mass-flow ratios up to 0.8 was used to induce unstart in the inlet/isolator. Background-oriented schlieren visualization of the inlet shocks was collected simultaneously with the PSP to determine when the inlet unstarted. Computational fluid dynamics results were used to determine off-wall flow structures and quantify approach …

Numerical Method For Strongly Variable-Density Flows At Low Mach Number: Flame-Sheet Regularisation And A Mass-Flux Immersed Boundary Method, Matheus P. Severino, Fernando F. Fachini, Elmer M. Gennaro, Daniel Rodríguez, Leandro F. Souza

Mathematical Modelling and Numerical Simulation with Applications

A low-Mach-number flow, in the laminar regime, has intrinsically two characteristic spatial scales for a given time scale, or two characteristic temporal scales for a given spatial scale, and these dual scales are very different due to the disparity between the flow and acoustic speed. Therefore, low-Mach-number flows impose mathematical and computational challenges in their description. Standard numerical methods for compressible flows, which are typically designed for problems with a single dominant spatial and temporal scale, require alternative approaches, such as preconditioning techniques or solvers tailored for low-Mach-number equations. The present work introduces a simplified fluid dynamics model for flows …

An Analytical Framework For Quantifying Urban And Community Resilience To Natural Hazards From Cell-Phone Gps-Location And Traffic-Flow Data, Georgios Chatzikyriakidis

Civil and Environmental Engineering Theses and Dissertations

Urban areas are increasingly exposed to natural hazards while accommodating a growing share of the global population, yet a consistent science-based framework for quantifying urban and community resilience remains lacking. This dissertation develops a physics-based analytical framework grounded in statistical mechanics and the quantitative theory of Brownian motion. A city is conceptualized as a complex medium in which citizens move analogously to Brownian particles within a viscoelastic environment, influenced by socioeconomic interactions and infrastructure functionality.

A central premise is that urban resilience, interpreted as engineering resilience (an outcome), can be quantified through a single metric: the mean-square displacement MSD=⟨r²(t)⟩, of …

Turbulent Plenum Jet-Crossflow Validation Via Subgrid Scale Model Variation And Upstream Forcing Under Dynamic Hybrid Rans-Les, Cole W. Mccallum

Mechanical Engineering Undergraduate Honors Theses

In modern gas turbine design, film cooling has become ubiquitous as a method for limiting heat transfer between high temperature gases post-combustion and the surface of downstream blades. This paper validates the use of various computational fluid dynamics techniques in recreating an experiment measuring adiabatic effectiveness over a surface downstream of a compound-angle N2 plenum jet incident on a turbulent-air boundary layer [1]. To do this, both RANS and Dynamic Hybrid RANS-LES (DHRL) methods are implemented and compared to previous research [2]. The latter method is then modified through implementation of a different subgrid scale (SGS) model and through addition …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

Bicuspid Valve Closure And Backflow Prevention: Role Of Leaflet Geometry, Badr Kauoi, A Bou Orm, P Navet, James W. Baish, Lance Munn

Faculty Journal Articles

Bicuspid valves with crescent-shaped leaflets are found in lymphatic vessels and veins, where their primary function is to prevent reflux and ensure unidirectional flow toward the heart. These valves are passive, and their functionality emerges spontaneously from a complex interplay between the properties of the valve leaflets and the flow patterns developing within the vessel sinus region surrounding the valve. The main function of the valves is to limit retrograde flow, or reflux, but the optimal valve structure has not been well characterized. Here we investigate numerically how the length of the leaflets affects the valve efficiency in preventing reflux. …

Microgravity-Induced Alterations In Left Atrial Hemodynamics And Thrombogenic Risk: Insights From Healthy And Atrial Fibrillation Models, Grace M. Hoeppner

Dissertations, Master's Theses and Master's Reports

Background: Microgravity exposure alters cardiovascular loading, yet its impact on left atrial flow dynamics and thrombotic risk remains poorly understood. This study investigates how spaceflight-relevant microgravity-induced changes in cardiac outflow affect left atrial hemodynamics in healthy individuals and patients with atrial fibrillation.

Methods: Patient-specific left atrial models were generated for three healthy individuals and three AF patients. Computational fluid dynamics (CFD) simulations were performed using each patient’s baseline mitral outflow waveform and two modified waveforms representing short- and long-duration post-flight cardiac loading changes derived from echocardiographic observations. Hemodynamic metrics included left atrial velocity, time averaged wall shear stress, oscillatory shear …

Computational Study Of Rotating Detonation Combustors, Aditya Balasubramaniam

Mechanical and Aerospace Engineering Theses

Rotating detonation combustors (RDCs) are pressure-gain combustion devices that sustain one or more continuously rotating detonation waves, offering potential thermodynamic and performance advantages over conventional deflagration-based systems. Their behavior depends strongly on combustor geometry and operating conditions. Understanding these effects is therefore essential for the design and optimization of practical RDCs. Accordingly, this thesis numerically investigates annular RDCs with two primary objectives: (1) to evaluate the effects of propellant mass flux and (2) to assess the influence of annular width on detonation-wave dynamics and combustor performance.

A finite-volume framework is used to solve the compressible reactive Euler equations with hydrogen–air …

Analytical Study Of Transient Mixed Convective Radiative Jeffrey Fluid Flow With Diffusion–Thermo And Chemical Reaction, V. Sathiya, R. Vijayaragavan, B. Rushi Kumar

Mansoura Engineering Journal

This research examines the behavior of unsteady mixed convective radiative Jeffrey fluid flow over a permeable moving plate with a diffusion thermo effect. The study incorporates multiple factors, including aligned magnetic fields, heat generation, radiation, and chemical reactions. The behavior of Jeffrey fluid under these combined conditions is particularly relevant to the design of efficient heat exchangers, MHD generators, and cooling systems for electronic components. A regular perturbation technique was employed to solve the governing equations, yielding distributions for velocity, temperature, and species concentration. These solutions enabled the derivation of expressions for skin friction, Nusselt number, and Sherwood number. Through …

Stability Analysis Of Thermohaline Convection With A Time-Varying Shear Flow Using The Lyapunov Method, Kalin Kochnev

Honors Scholar Theses

This work applies the Lyapunov method to identify instabilities and compute the growth rate of a linear time-varying system. The linear system studied describes cold fresh water on top of hot salty water with a periodically time-varying background shear flow. A time-dependent weighting matrix is employed to construct a Lyapunov function candidate. The resulting linear matrix inequalities are discretized in time using the forward Euler method. As the number of temporal discretization points increases, the growth rate predicted by the Lyapunov method or Floquet theory, used for comparison, will converge to the same value obtained from numerical simulations. Furthermore, the …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Unsaturated Fatty Acid Oil-Based Microdroplets: A Promising Novel Class Of Microdroplets, Ramiz S. Alejilat

Seton Hall University Dissertations and Theses (ETDs)

Droplet-based microfluidics has rapidly advanced numerous fields, including chemistry, biology, materials science, medicine, food science, and cosmetics. In these systems, fluorocarbon oil combined with fluorinated surfactants is the preferred medium for fluid encapsulation, offering exceptional stability and biocompatibility essential for sensitive biological and chemical processes. However, growing concerns about the environmental and biological risks associated with fluorinated chemicals have prompted a search for alternatives.

This study is the first to explore the use of unsaturated fatty acids derived from emu oil for microdroplet formation. We characterized droplet formation based on flow rates and the presence non-fluorinated surfactant at a certain …

On The Scalability Of Anisotropic Mesh Adaptation On Distributed And Shared Memory Architectures For Numerical Approximations, Kevin Mark Garner Jr.

Computer Science Theses & Dissertations

Mesh generation is a critical component in numerical approximations of Partial Differential Equations (PDEs). One such example includes Computational Fluid Dynamics (CFD), as CFD simulations in turn are crucial for applications in many industries, such as personalized healthcare and the design of aerospace vehicles. Generating high quality meshes for large-scale CFD problems presents a significant bottleneck in the CFD workflow. This dissertation proposes “fast,” parallel 3D mesh generation methodologies that are designed to leverage the concurrency offered by emerging High-Performance Computing (HPC) architectures. First, a distributed memory method is presented that integrates a sequential state-of-the-art isotropic, advancing front local reconnection-based …

Living Shoreline Prioritization And Hydrodynamic Habitat Suitability Models For Restoration In The Indian River Lagoon And Lake Worth Lagoon, Florida, Kelly M. Kibler, Melinda J. Donnelly, Vincent Encomio, Madison Giuntoli, Manisha Thenuwara, Brice Bennett, Laura Andrade Barron, Mariam Sonbol, Wynter Raine Seppala, Namritha Ramakrishnan, Jennifer Jordan Báez, Beth Orlando, Irene Arpayoglou, Melissa Meisenburg

Indian River Lagoon Shorelines

The spatial dataset: UCF_shorelinemodel_IRL_LWL.shp, was created with support from the Indian River Lagoon National Estuaries Program and Florida Sea Grant. These projects cumulatively led to creation of a living shoreline restoration prioritization model and hydrodynamic habitat suitability models for 1,550 km (963 miles) of estuarine shorelines in Indian River Lagoon and Lake Worth Lagoon.

The dataset presented herein includes:

1. shoreline data from >15,000 transects collected in the field,
2. shoreline wave climate data created through hydrodynamic modeling and frequency analysis of historic data,
3. categorization of potential risk for shoreline boat wake impact,
4. persistence of seagrass within 210 m of the shoreline, …

The Role Of Atmospheric Turbulence On Cloud Droplet Distribution And Droplet Impaction On An Airfoil, Arash Shad, Hashnayne Ahmed, ‪Nadim Zgheib, S. Balachandar, S. A. Sherif

Mechanical Engineering Faculty Publications

We conduct turbulence-informed Euler–Lagrange simulations of droplet-laden flow to examine the effects of atmospheric turbulence on droplet impingement characteristics on a NACA 0012 airfoil. We implement statistical overloading, whereby we inject millions of droplets, ranging in diameter from 1 to 160 microns, upstream of the airfoil at an average streamwise velocity of 120 m/s. Within a fraction of a second, these droplets would have either impinged on the airfoil or continued downstream. While the incoming air flow is maintained uniform, droplet injection is informed by ambient turbulence, affecting both the droplet velocity distribution as well as the size-dependent preferential concentration …

Meshless Discrete Velocity Boltzmann Model For Porous Media Flow, Amandine Maidenberg

Doctoral Dissertations and Master's Theses

This dissertation explores the combination of two sophisticated techniques for addressing computational fluid dynamics: the discrete velocity Boltzmann equation (DVBE) and the localized collocation meshless model with upwinding (U-LCMM). The DVBE is a high-level model that describes the foundations of transport phenomena by addressing the microscale motions of particles themselves and the effect of their aggregate behaviors on continuum principles. This equation integrates multiple scales of phenomena; while it can be used for fluid flow at Navier-Stokes scales, it can also resolve fine features that can only be described at the molecular level. This type of model is necessary for …

Performance Analysis Of Flapping-Foil Energy Harvesters Under Shear-Flow Conditions, Maqusud Alam, Bubryur Kim, Shehnaz Akhtar, Sujeen Song, Zengshun Chen, Jinwoo An

Civil Engineering Faculty Publications

Flapping-foil energy harvesters represent a promising technology for extracting energy from fluid flows, although their performance under shear-flow conditions is poorly understood. To address this research gap, we investigated the impact of power-law shear flow on the performance of flapping-foil energy harvesters. We conducted numerical simulations at different Reynolds numbers (Re = 1000, 50 000, and 500 000) under uniform-flow and shear-flow conditions. Based on the results, shear flow minimally affected the power outputs at Re = 1000 and 50 000, where viscous forces dominate the flow dynamics. However, at Re = 500 000, shear flow significantly reduced the …