Engineering Physics Commons^™

Numerical Study Of Owls' Leading-Edge Serrations, Asif Shahriar Nafi, Nikolaos Beratlis, Elias Balaras, Roi Gurka

Physics and Engineering Science

Owls' silent flight is commonly attributed to their special wing morphology combined with wingbeat kinematics. One of these special morphological features is known as the leading-edge serrations: rigid miniature hook-like patterns found at the primaries of the wings' leading-edge. It has been hypothesized that leading-edge serrations function as a passive flow control mechanism, impacting the aerodynamic performance. To elucidate the flow physics associated with owls' leading-edge serrations, we investigate the flow-field characteristic around a barn owl wing with serrated leading-edge geometry positioned at 20° angle of attack for a Reynolds number of 40 000. We use direct numerical simulations, where …

Advanced Progress In Metal Halide Perovskite Solar Cells: A Review, Judy Fan

Physics Faculty Research

Organic and inorganic hybrid perovskite solar cells (PSCs) have attracted intense attention in the past decades due to their fantastic performance in stability, durability, rapid processing, and high efficiency competitive to Si-based counterparts. The lab-fabricated solar cells based on organolead halide perovskites have reached a record efficiency of 26.1 %, which implies that halide perovskite materials may open a new paradigm for future solar energy innovation. Organometal/inorganic halide perovskites take advantage of tunable bandgaps, engineerable composites/interfaces, and solution-processible methods that render easy integrations of subcells to form tandem and multijunction modules with higher efficiencies potentially beyond the Shockley-Queisser (SQ) limit. …

An Optimized Search For Dark Matter In The Galactic Halo With Hawc, A. Albert, R. Alfaro, C. Alvarez, J. C. Arteaga-Velázquez, D. Avila Rojas, H. A. Ayala Solares, E. Belmont-Moreno, K. S. Caballero-Mora, T. Capistrán, A. Carramiñana, S. Casanova, O. Chaparro-Amaro, U. Cotti, J. Cotzomi, E. De La Fuente, R. Diaz Hernandez, B. L. Dingus, M. A. Duvernois, M. Durocher, J. C. Diaz-Velez, C. Espinoza, M. M. Gonzalez, J. A. Goodman, J. P. Harding, D. Huang, F. Hueyotl-Zahuantitla, A. Iriarte, V. Joshi, G. J. Kunde, J. Lee, H. Leon Vargas, J. T. Linneman, A. L. Longinotti, G. Luis-Raya, J. Lundeen, K. Malone, O. Martinez, J. Martinez-Castro, J. A. Matthews, E. Moreno, M. Mostafa, A. Nayerhoda, L. Nellen, A. Peisker, E. G. Perez-Perez, C. D. Rho, D. Rosa-Gonzalez, H. Salazar, D. Salazar-Gallegos, A. Sandoval, J. Serna-Franco, R. W. Springer, O. Tibolla, K. Tollefson, I. Torres, R. Torres-Escobedo, R. Turner, F. Urena-Mena, L. Villasenor, Xiaojie Wang, H. Zhou, C. De Leon

Physics Faculty Research & Creative Works

The Galactic Halo is a key target for indirect dark matter detection. The High-Altitude Water Cherenkov (HAWC) observatory is a high-energy (∼300 GeV to >100 TeV) gamma-ray detector located in central Mexico. HAWC operates via the water Cherenkov technique and has both a wide field of view of ∼ 2 sr and a >95% duty cycle, making it ideal for analyses of highly extended sources. We made use of these properties of HAWC, and a new background-estimation technique optimized for extended sources to probe a large region of the Galactic Halo for dark matter signals. With this approach, we set …

Characterization Of Interlayer Laser Shock Peening During Fused Filament Fabrication Of Polylactic Acid (Pla), Fabien Denise

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The field of additive manufacturing (AM) has gained a significant amount of popularity due to the increasing need for more sustainable manufacturing techniques and the adaptive development of complex product geometries. The problem is that AM parts routinely exhibit flaws or weaknesses that affect functionality or performance. Over the years, surface treatments have been developed to compensate certain flaws or weaknesses in manufactured products. Combining surface treatments with the modularity of additive manufacturing could lead to more adaptable and creative improvements of product functions in the future. The current work evaluates the feasibility of pursuing a new research axis in …

Robust Zero Modes In Non-Hermitian Systems Without Global Symmetries, Jose D. H. Rivero, Courtney Fleming, Bingkun Qi, Liang Feng, Li Ge

Publications and Research

We present an approach to achieve zero modes in lattice models that do not rely on any symmetry or topology of the bulk, which are robust against disorder in the bulk of any type and strength. Such symmetry-free zero modes (SFZMs) are formed by attaching a single site or small cluster with zero mode(s) to the bulk, which serves as the “nucleus” that expands to the entire lattice. We identify the requirements on the couplings between this boundary and the bulk, which reveals that this approach is intrinsically non-Hermitian. We then provide several examples with either an arbitrary or structured …

Impact Of Silicon Ion Irradiation On Aluminum Nitride-Transduced Microelectromechanical Resonators, David D. Lynes, Joshua Young, Eric Lang, Hengky Chandrahalim

Faculty Publications

Microelectromechanical systems (MEMS) resonators use is widespread, from electronic filters and oscillators to physical sensors such as accelerometers and gyroscopes. These devices' ubiquity, small size, and low power consumption make them ideal for use in systems such as CubeSats, micro aerial vehicles, autonomous underwater vehicles, and micro-robots operating in radiation environments. Radiation's interaction with materials manifests as atomic displacement and ionization, resulting in mechanical and electronic property changes, photocurrents, and charge buildup. This study examines silicon (Si) ion irradiation's interaction with piezoelectrically transduced MEMS resonators. Furthermore, the effect of adding a dielectric silicon oxide (SiO₂) thin film is …

Hydroxyapatite-Based Coatings On Silicon Wafers And Printed Zirconia, Antoine Chauvin

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Dental surgery needs a naturally attract implant design that can ensure both osseointegration and soft tissue integration. Hydroxyapatite (HAp), the main mineral constituent of dentine and tooth enamel, is commonly used as a coating component, notably for overlaying titanium– or ceramics–based implants. This thesis aims to investigate the behavior of a HAp-based coating, specifically designed to be compatible with a porous substrate. Coating layers are made by sol–gel dip coating by immersion of porous substrates made by additive manufacturing into solutions of HAp, having been mixed with polyethyleneimine (PEI), to improve the adhesion of HAp on the substrate. First, the …

Directional Microwave Emission From Femtosecond-Laser Illuminated Linear Arrays Of Superconducting Rings, Thomas J. Bullard, Kyle Frische, Charlie Ebbing, Stephen J. Hageman, John Morrison, John Bulmer, Enam A. Chowdury, Michael L. Dexter, Timothy J. Haugan, Anil K. Patnaik

Faculty Publications

We examine the electromagnetic emission from two photo-illuminated linear arrays composed of inductively charged superconducting ring elements. The arrays are illuminated by an ultrafast infrared laser that triggers microwave broadband emission detected in the 1–26 GHz range. Based on constructive interference from the arrays a narrowing of the forward radiation lobe is observed with increasing element count and frequency demonstrating directed GHz emission. Results suggest that higher frequencies and a larger number of elements are achievable leading to a unique pulsed array emitter concept that can span frequencies from the microwave to the terahertz (THz) regime.

Non-Hermitian Gauged Laser Arrays With Localized Excitations: Anomalous Threshold And Generalized Principle Of Selective Pumping, Li Ge, Zihe Gao, Liang Feng

Publications and Research

We investigate non-Hermitian skin modes in laser arrays with spatially localized excitation. Intriguingly, we observe an unusual threshold behavior when selectively pumping either the head or the tail of these modes: both cases exhibit the same lasing threshold and hence defy the conventional principle of selective pumping, which aims to maximize the overlap between the pump profile and the target lasing mode. To shed light on this enigma, we reveal a previously overlooked phenomenon, i.e., energy exchange at non-Hermitian coupling junctions with the photonic environment, which does not occur with uniform gain or loss. Utilizing a transfer matrix approach, we …

Improving The Structural And Physical Yield Of Aluminum By Repeated Additions Of Iron Carbide, Fayrooz K. Albasri

Al-Bahir

Aluminum suffers from low hardness and some ductility when thermal sintering which requires reinforcement with carbide or ceramic materials as Iron FeC with volumetric properties (2,4,6,8,10 )%. For purpose of the pressing process after mixing the two powder together, a scanning electron microscope examination performed for the prepared samples and found that there is a surface and structural consistency between aluminum and iron carbide and the best homogeneity is at10 % of carbide. Also some physical tests conducted for prepared samples and the results of the real density showed that the addition of iron carbide increases the density gradually and …

Trumpet Directivity From A Rotating Semicircular Array, Samuel D. Bellows, Joseph E. Avila, Timothy W. Leishman

Directivity

The directivity function of a played musical instrument describes the angular dependence of its acoustic radiation and diffraction about the instrument, musician, and musician’s chair. Directivity influences sound in rehearsal, performance, and recording environments and signals in audio systems. Because high-resolution, spherically comprehensive measurements of played musical instruments have been unavailable in the past, the authors have undertaken research to produce and share such data for studies of musical instruments, simulations of acoustical environments, optimizations of microphone placements, and other applications. The authors acquired the data from repeated chromatic scales produced by a trumpet played at mezzo-forte in an anechoic …

The Role Of Leading-Edge Serrations In Controlling The Flow Over Owls’ Wing, Tanner Saussaman, Asif Nafi, David Charland, Hadar Ben-Gida, Roi Gurka

Physics and Engineering Science

We studied the effects of leading-edge serrations on the flow dynamics developed over an owl wing model. Owls are predatory birds. Most owl species are nocturnal, with some active during the day. The nocturnal ones feature stealth capabilities that are partially attributed to their wing microfeatures. One of these microfeatures is small rigid combs (i.e. serrations) aligned at an angle with respect to the incoming flow located at the wings' leading-edge region of the primaries. These serrations are essentially passive flow control devices that enhance some of the owls' flight characteristics, such as aeroacoustics and, potentially, aerodynamics. We performed a …

Using Powder Metallurgy Process To Produce Ceramic-Metal Composites, Ibrahim F. Abed, Salih, Y. Darweesh

Al-Bahir

Pressing powders and engineering materials is an innovative method for producing samples with a low cost and multiple industrial applications. In the current article, copper metal was added in different volume ratios to a ceramic material, alumina, for the purpose of improving the properties of alumina, by pressing with a hydraulic press. Where the results of the article showed that the percentage of true porosity after sintering is from (26-13)% with a copper content of (5%) to (25%). As for the apparent porosity after sintering, it decreased from (26-9)% at a copper content of (5-25)%, while the water absorption was …

Ferroelectric Hafnia Surface In Action, Xia Hong

Nebraska Center for Materials and Nanoscience: Faculty Publications

Piezoresponse microscopy and spectroscopy reveal the inextricable role of surface electrochemistry in stabilizing and controlling ferroelectricity in doped hafnia.

Doped hafnia (HfO₂), a relatively new member of the ferroelectric family, has challenged in many ways our conventional perception of ferroelectric oxides. It possesses extremely localized electric dipoles that are independently switchable,¹ making it immune to finite size effects — the loss of long-range dipole order in ferroic materials due to size scaling. While polycrystalline grains and microstructures can yield lower polarization and poorer cycling behavior in canonical ferroelectrics such as Pb(Zr,Ti)O₃ and BaTiO₃, in …

Hawc Study Of The Very-High-Energy Γ-Ray Spectrum Of Hawc J1844−034, A. Albert, C. Alvarez, D. Avila Rojas, H. A.Ayala Solares, R. Babu, E. Belmont-Moreno, M. Breuhaus, T. Capistrán, A. Carramiñana, S. Casanova, J. Cotzomi, S. Coutiño De León, E. De La Fuente, D. Depaoli, R. Diaz Hernandez, B. L. Dingus, M. A. Duvernois, M. Durocher, K. Engel, C. Espinoza, K. L. Fan, K. Fang, N. Fraija, J. A. Garcia-Gonzalez, M. M. Gonzalez, J. A. Goodman, S. Groetsch, J. P, Harding, I. Herzog, J. Hinton, D. Huang, F. Hueyotl-Zahuantitla, T. B. Humensky, P. Huntemeyer, V. Joshi, S. Kaufmann, J. Lee, H. Leon Vargas, A. L. Longinotti, G. Luis-Raya, K. Malone, O. Martinez, J. Martinez-Castro, J. A. Matthews, P. Miranda-Romagnoli, J. A. Morales-Soto, E. Moreno, M. Mostafa, L. Nellen, R. Noriega-Papaqui, L. Olivera-Nieto, N. Omodei, E. G. Perez-Perez, C. D. Rho, D. Rosa-Gonzalez, E. Ruiz-Velasco, H. Salazar, D. Salazar-Gallegos, A. Sandoval, M. Schneider, J. Serna-Franco, A. J. Smith, Y. Son, R. W. Springer, O. Tibolla, K. Tollefson, I. Torres, R. Torres-Escobedo, R. Turner, F. Urena-Mena, E. Varela, L. Villasenor, Xiaojie Wang, I. J. Watson, E. Willox, H. Zhou

Physics Faculty Research & Creative Works

Recently, the region surrounding eHWC J1842−035 has been studied extensively by γ-ray observatories due to its extended emission reaching up to a few hundred TeV and potential as a hadronic accelerator. In this work, we use 1910 days of cumulative data from the High-Altitude Water Cherenkov (HAWC) observatory to carry out a dedicated systematic source search of the eHWC J1842−035 region. During the search, we found three sources in the region, namely, HAWC J1844−034, HAWC J1843−032, and HAWC J1846−025. We have identified HAWC J1844−034 as the extended source that emits photons with energies up to 175 TeV. We compute the …

Analysis Of Coronal Magnetic Field Parameters During X- And M-Class Solar Flares, Seth H. Garland

Theses and Dissertations

Using Non-Linear Force Free Field (NLFFF) extrapolation, 3D magnetic fields were modeled from the 12-minute cadence Helioseismic and Magnetic Imager (HMI) photospheric vector magnetograms, spanning a time period of one hour before through one hour after the start of 18 X-class flares and 12 M-class flares. Several magnetic field parameters were calculated from the modeled fields directly – as well as from the power spectrum of surface maps generated by summing the fields along the vertical axis – for two different regions: areas with photospheric Bz ≥ 300 G (Active Region – AR) and areas above the photosphere with the …

Direct Measurement Of The 114cd(N, Gamma)115cd Cross Section In The 1 Ev To 300 Kev Energy Range, Kofi Tutu Addo Assumin-Gyimah

Theses and Dissertations

The large thermal cross section of cadmium makes it ideal for many practical applications where screening of thermal neutrons is desired. For example, in non-destructive assay techniques, or for astrophysical studies of the s-process. All such applications require precise knowledge of the neutron-capture cross section on cadmium. Although there are some data on neutron-capture cross sections particularly at thermal energies and at energies relevant for astrophysics, there is very little data at most other energies. Further, the evaluated cross sections from the ENDF and JENDL databases disagree at high energies. Therefore, there is a critical need for precise knowledge of …

Discovery Of Gamma Rays From The Quiescent Sun With Hawc, A. Albert, R. Alfaro, C. Alvarez, J. C. Arteaga-Velázquez, D. Avila Rojas, H. A. Ayala Solares, R. Babu, E. Belmont-Moreno, C. Brisbois, K. S. Caballero-Mora, T. Capistrán, A. Carramiñana, S. Casanova, O. Chaparro-Amaro, U. Cotti, J. Cotzomi, S. Coutiño De León, E. De La Fuente, R. Diaz Hernandez, B. L. Dingus, M. A. Duvernois, M. Durocher, J. C. Diaz-Velez, R. W. Ellsworth, K. Engel, C. Espinoza, K. L. Fan, K. Fang, M. Fernandez Alonso, H. Fleischhack, N. Fraija, J. A. Garcia-Gonzalez, F. Garfias, M. M. Gonzalez, J. A. Goodman, J. P. Harding, S. Hernandez, J. Hinton, D. Huang, F. Hueyotl-Zahuantitla, P. Huntemeyer, A. Iriarte, V. Joshi, S. Kaufmann, J. Lee, J. T. Linnemann, A. L. Longinotti, G. Luis-Raya, K. Malone, O. Martinez, J. Martinez-Castro, J. A. Matthews, P. Miranda-Romagnoli, J. A. Morales-Soto, E. Moreno, M. Mostafa, A. Nayerhoda, L. Nellen, M. U. Nisa, R. Noriega-Papaqui, L. Olivera-Nieto, N. Omodei, Y. Perez Araujo, E. G. Perez-Perez, C. D. Rho, D. Rosa-Gonzalez, E. Ruiz-Velasco, H. Salazar, D. Salazar-Galeggos, A. Sandoval, M. Schneider, J. Serna-Franco, A. J. Smith, Y. Son, R. W. Springer, O. Tibolla, K. Tollefson, I. Torres, R. Torres-Escobedo, R. Turner, F. Urena-Mena, E. Varela, J. Villasenor, Xiaojie Wang, I. J. Watson, E. Willox, S. Yun-Carcamo, H. Zhou, C. De Leon

Physics Faculty Research & Creative Works

We report the first detection of a TeV γ-ray flux from the solar disk (6.3σ), based on 6.1 years of data from the High-Altitude Water Cherenkov (HAWC) observatory. The 0.5-2.6 TeV spectrum is well fit by a power law, dN/dE=A(E/1 TeV)-γ, with A=(1.6±0.3)x10-12 TeV-1 cm-2 s-1 and γ=3.62±0.14. The flux shows a strong indication of anticorrelation with solar activity. These results extend the bright, hard GeV emission from the disk observed with Fermi-LAT, seemingly due to hadronic Galactic cosmic rays showering on nuclei in the solar atmosphere. However, current theoretical models are unable to explain the details of how solar …

Electromagnetic Simulations Of The Lansce Chopper Structure, Yusuf Sahin

Electrical and Computer Engineering ETDs

Particle accelerators are important for basic research as well as in applications such as ion implantation and cancer therapy. One important accelerator is the Los Alamos Neutron Science Center (LANSCE) located at Los Alamos National Laboratory (LANL) that primarily produces neutrons for research. The beam chopper simulation described here is a study to provide better modeling of this subsystem of LANSCE. A chopper is a device in which particles are intermittently sliced and directed to a target and/or experiment. The simulations in this thesis are used to analyze the correct operating parameters of the chopper. A good chopper model can …

Study Of Microphonic Effects On The C100 Cryomodule For High Energy Electron Beam Accelerators, Caleb James Hull

Mechanical & Aerospace Engineering Theses & Dissertations

The Continuous Electron Beam Accelerator Facility (CEBAF) at Thomas Jefferson National Laboratory (JLab) is a particle accelerator which can accelerate an electron beam to relativistic speeds and apply the beam onto target samples. The C100 superconducting radio frequency (SRF) cavity is the primary accelerating structure of the C100 cryomodule, one of the many cryomodules which compose the CEBAF linear accelerator. SRF cavities are particularly sensitive to internal and external vibrations that can result in a phenomenon called microphonics which degrade the operational stability of a cryomodule.

The purpose of this thesis is to investigate the significance of mechanical disturbances on …

Experimental And Computational Aerodynamic Studies Of Axially-Oriented Low-Fineness-Ratio Cylinders, Forrest Miller

Mechanical & Aerospace Engineering Theses & Dissertations

For the successful completion of atmospheric entry, descent, and landing (EDL) missions, a body geometry must be selected which provides favorable dynamic aerodynamic properties. The types of experimental facilities capable of collecting information on these properties are limited; however, their numbers are growing thanks to the continued work by the aerodynamics community. NASA Langley Research Center (LaRC) is conducting dynamic aerodynamic testing using a subsonic magnetic suspension and balance system (MSBS), with the end goal of implementing a supersonic MSBS facility at NASA Glenn Research Center. MSBSs are also currently used at the Institute of Fluid Science (IFS) at Tohoku …

Finite Element Analysis Of A Coconut (Cocos Nucifera L.) Climbing Mechanism, Arjay O. Afan, Omar F. Zubia, Adrian A. Borja, Ralph Kristoffer B. Gallegos

The Philippine Agricultural Scientist

A coconut climber mechanism was subjected to Finite Element Analysis (FEA) to improve its overall design and analyze its strength characteristics. The von Mises stress, total deformation, and factor of safety were evaluated using static structural analysis for the seat and pedal assemblies of the mechanism. The design has a minimum yielding factor of safety of 7.03 for the seat assembly and 12.09 for the pedal assembly. If aluminum is used as an alternative to steel, the prototype's weight can be reduced to at least 64.56% without compromising its strength properties. The weight reduction by using aluminum is expected to …

Tardys Quantifiers: Extracting Temporal And Reversible Dynamical Symmetries, Nhat Vu Minh Nguyen, Arjendu K. Pattanayak, Andres Aragoneses

2023 Symposium

One of the great challenges in complex and chaotic dynamics is to reveal the details of its underlying determinism. This can be manifest in the form of temporal correlations or structured patterns in the dynamics of a measurable variable. These temporal dynamical structures are sometimes a consequence of hidden global symmetries. Here we identify the temporal (approximate) symmetries of a semiconductor laser with external optical feedback, based on which we define the Temporal And Reversible DYnamical Symmetry (TARDYS) quantifiers to evaluate the relevance of specific temporal correlations in a time series. We show that these symmetries are also present in …

Effective Nanomembranes From Chitosan/Pva Blend Decorated Graphene Oxide With Gum Rosin And Silver Nanoparticles For Removal Of Heavy Metals And Microbes From Water Resources, Mohamed Morsy

Nanotechnology Research Centre

No abstract provided.

Domain Wall Saddle Point Morphology In Ferroelectric Triglycine Sulfate, C. J. Mccluskey, A. Kumar, Alexei Gruverman, I. Luk’Yanchuk, J. M. Gregg

Alexei Gruverman Publications

Ferroelectric domain walls, across which there is a divergence in polarization, usually have enhanced electrical conductivity relative to bulk. However, in lead germanate, head-to-head and tail-to-tail walls are electrically insulating. Recent studies have shown that this is because, when oppositely oriented domains meet, polar divergence is obviated by a combination of domain bifurcation and suspected local dipolar rotation. To explore the uniqueness, or otherwise, of this microstructure, we have used tomographic piezoresponse force microscopy to map three-dimensional domain morphologies in another uniaxial ferroelectric system: triglycine sulfate. This mapping reveals an abundance of domain wall saddle points, which are characteristic of …

Assessment Of Bridge Pier Response To Fire, Vehicle Impact, And Air Blast, Chen Fang, Qusai Alomari, Daniel G. Linzell

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Highway bridges exposed to intentional or unintentional fire followed by combined vehicle impact and air blast are at risk of significant damage and, possibly, collapse. Limited studies examining the complex effects of these extreme demands on bridge support elements and parametrizing their response and damage are found in the open literature. Research that is presented is part of an ongoing numerical investigation examining round, multi-column, reinforced concrete (RC), bridge pier behavior subject to multi-hazard scenarios involving fire, vehicle impact, and air blast. Detailed nonlinear finite element analysis models of single columns and multi-column piers supported by a pile foundation system …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Effect On Focusing Fields By Ferromagnetic Cell Cores In Linear Induction Accelerators, Cooper Guillaume

Senior Honors Theses

In the Los Alamos National Laboratories DARHT facility, there are two perpendicular linear induction accelerators, LIAs. The LIAs’ solenoids produce magnetic fields which focus the electron beam. Simultaneously, the accelerating pulse creates a magnetic field. These two field intensities act upon a ferromagnetic material in the cells to enhance magnetic flux density. Due to the nonlinearity of the material, this flux density will reach a saturation point. In turn, the magnetic field intensity of the axial solenoidal magnetic field will be affected and slightly altered. The width of the electron beam will increase, causing a decrease in effectiveness. Through simulation, …

Analysis And Application Of Finite Element And High-Order Finite Difference Methods For Maxwell’S Equations In Complex Media, Li Zhu

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Perfectly Matched Layer (PML) technique is an effective tool introduced by B´erenger [13] to reduce the unbounded wave propagation problem to a bounded domain problem. This dissertation focuses on two different PML models and their applications to wave propagation problems with Maxwell’s equation in complex media. We investigate these models using two popular numerical methods: the Finite Difference Method (FDM) in Chapters 2 and 3, and the Finite Element Method (FEM) in Chapters 4 and 5.In Chapter 2, we focus on analyzing the stability of a PML developed by B’ecache et al. [10] for simulating wave propagation in the …