Engineering Physics Commons^™

Treated Hfo2 Based Rram Devices With Ru, Tan, Tin As Top Electrode For In-Memory Computing Hardware, Yuvraj Dineshkumar Patel

Theses

The scalability and power efficiency of the conventional CMOS technology is steadily coming to a halt due to increasing problems and challenges in fabrication technology. Many non-volatile memory devices have emerged recently to meet the scaling challenges. Memory devices such as RRAMs or ReRAM (Resistive Random-Access Memory) have proved to be a promising candidate for analog in memory computing applications related to inference and learning in artificial intelligence. A RRAM cell has a MIM (Metal insulator metal) structure that exhibits reversible resistive switching on application of positive or negative voltage. But detailed studies on the power consumption, repeatability and retention …

Drawing Parallels In Art Science For Collaborative Learning: A Case Study, Karen Westland

The Transdisciplinary STEAM+ Journal

This research paper explores drawing as a tool to facilitate interdisciplinary practice. Outlined is the personal experience of PhD researcher [name removed] in their physics/craft research project, combined with thoughts and opinions from collaborators gathered through group discursive interviews. Interdisciplinary projects face interpersonal and conceptually ambiguous challenges which can be addressed through adopting drawing techniques for educational purposes. Findings highlight that drawing can assist across a breadth of applications as a learning tool for everyone, regardless of drawing ability, to improve the functionality of collaborative projects. Specifically, drawing combined with other communication techniques develops a performative communicative approach that enriches …

Numerical Simulation Of Nonlinear Vibrations Of Discrete Mass With Harmonic Force Perturbation, M. Yusupov, B. A. Akhmedov, Olga Karpova

Acta of Turin Polytechnic University in Tashkent

The problem of vibration of a single-mass system under the force excitation of vibration associated with a fixed base by a weightless nonlinear viscoelastic spring is considered. To take into account the rheological properties of the spring material, the Boltzmann-Volterra principle was used. Mathematical models of the problem under consideration are obtained, which are described by integro-differential equations. A solution method based on the use of quadrature formulas has been developed and a computer program has been compiled on its basis, the results obtained are presented in the form of graphs. The influence of nonlinear and rheological properties of a …

1. Test Data, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

This data set contains recorded and processed bubble sounds under different conditions: a few bubbles vs. constant flow bubbles. Each condition is tested with nitrogen and with methane.

2. Modeling, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

This data set contains the results for acoustic bubble modeling.

3. Localization, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

This data set contains the results for oil leakage source localization.

4. Metadata Files, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

This data set contains all ReadMe files for test data, modeling data, and localization data, as well as the corresponding codes.

5. Programs And Algorithms, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

This data set contains all codes for the study.

6. Supplemental Materials, Zhiqu Lu, Likun Zhang, Lei Cao

Gulf Research Program Data Sets

This data set contains all conference presentations, manuscripts, technical reports, posters.

The Importance Of Frontier Orbital Symmetry In The Adsorption Of Diiodobenzene On Mos2(0001), Prescott E. Evans, Zahra Hooshmand, Talat S. Rahman, Peter Dowben

Peter Dowben Publications

Evidence of a role of frontier orbital symmetry, in the adsorption process of diiodobenzene on MoS₂(0001), appears in the huge differences in the rate of adsorption between 1,3-diiodobenzene, 1,2-diiodobenzene and 1,4-diiodobenzene isomers on MoS₂. Experiments indicate that the rate of adsorption of 1,3-diiodobenzene on MoS2(0001) is much greater than that of the 1,2-diodobenzene and 1,4-diiodbenzene isomers. As the differences in calculated diiodobenzene isomer-MoS₂ system adsorption energies and electron affinities are negligible, frontier orbital symmetry appears to play a significant role in diiodobenzene adsorption on MoS₂(0001). The experimental and theory results, in combination, suggest …

Foundations Of The Geometric Mechanics Udwadia-Kalaba Framework For Rigid Body Constrained Motion Analysis, Brennan S. Mccann

Doctoral Dissertations and Master's Theses

Presented herein are multiple tools for constrained motion analysis extended to different dynamical frameworks. The Udwadia-Kalaba (UK) formalism for the constrained motion analysis of a point mass is a well-documented and applied methodology. Here, UK formulation is generalized to the dynamics of rigid bodies on nonlinear manifolds in the geometric mechanics framework. This approach simultaneously treats rotational and translational motion in a unified method without encountering singularites or non-uniqueness, issues that would arise were attitude parameterization sets used. The viability of this geometric mechanics UK formalism is demonstrated for the cases of fully and underconstrained systems. The nominal UK formalism …

Development And Characterization Of Metal Contacts For Graded Composition Ingan Solar Cells, Reem E. Alhelais

Graduate Theses and Dissertations

There is an increasing demand for high-power electronic components and optoelectronic devices with low-loss and high efficiency. III-nitride semiconductor materials have demonstrated great potential for high-power, high-frequency, and high-temperature applications because of their remarkable and wide-ranging electronic and physical properties. These material systems, including alloys of AlN, GaN, and InN, are currently being explored for their potential to develop efficient photovoltaic cells. They can potentially achieve higher efficiency because of their very high direct wide band edge, absorption coefficients, and resistance to defects. The compositionally graded Group III-nitride alloy allows access to a large range of energies by varying the …

Ultrafast Spin-Currents And Charge Conversion At 3d-5d Interfaces Probed By Time-Domain Terahertz Spectroscopy, T. H. Dang, J. Hawecker, E. Rongione, G. Baez Flores, D. Q. To, J. C. Rojas-Sanchez, H. Nong, J. Mangeney, J. Tignon, F. Godel, S. Collin, P. Seneor, M. Bibes, A. Fert, M. Anane, J. M. George, L. Vila, M. Cosset-Cheneau, D. Dolfi, R. Lebrun, P. Bortolotti, Kirill Belashchenko, S. Dhillon, H. Jaffrès

Kirill Belashchenko Publications

Spintronic structures are extensively investigated for their spin-orbit torque properties, required for magnetic commutation functionalities. Current progress in these materials is dependent on the interface engineering for the optimization of spin transmission. Here, we advance the analysis of ultrafast spin-charge conversion phenomena at ferromagnetic-Transition metal interfaces due to their inverse spin-Hall effect properties. In particular, the intrinsic inverse spin-Hall effect of Pt-based systems and extrinsic inverse spin-Hall effect of Au:W and Au:Ta in NiFe/Au:(W,Ta) bilayers are investigated. The spin-charge conversion is probed by complementary techniques-ultrafast THz time-domain spectroscopy in the dynamic regime for THz pulse emission and ferromagnetic resonance spin-pumping …

Spectroscopic Diagnostics For Supersonic Air Microwave Discharges, James E. Caplinger

Theses and Dissertations

Optical Emission Spectroscopy (OES) is an increasingly relevant technique in plasma diagnostics due to its inherent non-invasive nature and simple application relative to other popular techniques. In this work, common OES techniques are combined with novel methods, developed here, in an effort to provide comprehensive OES techniques for stationary and supersonic air microwave discharges. To this end, a detailed collisional-radiative model for strong atomic oxygen lines has been developed and used to identify the importance of often overlooked mechanisms including cascade emission and metastable excitation. Using these results, a combined argon actinometry technique was developed which makes use of the …

Proximity-Induced Magnetization In Graphene: Towards Efficient Spin Gating, Mihovil Bosnar, Ivor Lončarić, P. Lazić, Kirill Belashchenko, Igor Žutić

Kirill Belashchenko Publications

Gate-tunable spin-dependent properties could be induced in graphene at room temperature through the magnetic proximity effect by placing it in contact with a metallic ferromagnet. Because strong chemical bonding with the metallic substrate makes gating ineffective, an intervening passivation layer is needed. Previously considered passivation layers result in a large shift of the Dirac point away from the Fermi level, so that unrealistically large gate fields are required to tune the spin polarization in graphene (Gr). We show that a monolayer of Au or Pt used as the passivation layer between Co and graphene brings the Dirac point closer to …

Detection Of Uncompensated Magnetization At The Interface Of An Epitaxial Antiferromagnetic Insulator, Pavel N. Lapa, Min Han Lee, Igor V. Roshchin, Kirill Belashchenko, Ivan K. Schuller

Kirill Belashchenko Publications

We have probed directly the temperature and magnetic field dependence of pinned uncompensated magnetization at the interface of antiferromagnetic FeF₂ with Cu, using FeF₂-Cu-Co spin valves. Electrons polarized by the Co layer are scattered by the pinned uncompensated moments at the FeF₂-Cu interface giving rise to giant magnetoresistance. We determined the direction and magnitude of the pinned uncompensated magnetization at different magnetic fields and temperatures using the angular dependencies of resistance. The strong FeF₂ anisotropy pins the uncompensated magnetization along the easy axis independent of the cooling field orientation. Most interestingly, magnetic fields as …

Reinvestigation Of The Intrinsic Magnetic Properties Of (Fe1-Xcox)2b Alloys And Crystallization Behavior Of Ribbons, Tej Nath Lamichhane, Olena Palasyuk, Vladimir P. Antropov, Ivan A. Zhuravlev, Kirill Belashchenko, Ikenna C. Nlebedim, Kevin W. Dennis, Anton Jesche, Matthew J. Kramer, Sergey L. Bud'ko, R. William Mccallum, Paul C. Canfield, Valentin Taufour

Kirill Belashchenko Publications

New determination of the magnetic anisotropy from single crystals of (Fe_1-xCo_x)2B alloys are presented. The anomalous temperature dependence of the anisotropy constant is discussed using the standard Callen-Callen theory, which is shown to be insufficient to explain the experimental results. A more material specific study using first-principles calculations with disordered moments approach gives a much more consistent interpretation of the experimental data. Since the intrinsic properties of the alloys with x=0.3-0.35 are promising for permanent magnets applications, initial investigation of the extrinsic properties are described, in particular the crystallization of melt spun ribbons with Cu, Al, …

Finite-Time State Estimation For An Inverted Pendulum Under Input-Multiplicative Uncertainty, Sergey V. Drakunov, William Mackunis, Anu Kossery Jayaprakash, Krishna Bhavithavya Kidambi, Mahmut Reyhanoglu

Publications

A sliding mode observer is presented, which is rigorously proven to achieve finite-time state estimation of a dual-parallel underactuated (i.e., single-input multi-output) cart inverted pendulum system in the presence of parametric uncertainty. A salient feature of the proposed sliding mode observer design is that a rigorous analysis is provided, which proves finite-time estimation of the complete system state in the presence of input-multiplicative parametric uncertainty. The performance of the proposed observer design is demonstrated through numerical case studies using both sliding mode control (SMC)- and linear quadratic regulator (LQR)-based closed-loop control systems. The main contribution presented here is the rigorous …

A Laser Induced Fluorescence Design For Renewable Energy Application, Shaimaa S. Mahdi, Intisar A. Hamad

Karbala International Journal of Modern Science

Biomass is considered to be one of the highest potential renewable energy sources to meet the requirements of energy in the world, where it can be used as an effective alternative for renewable energy sources, including electricity and heating, as well as fuel used in transport. One of the most common problems accompanying the usage of biomass through gasification processes to produce gases is the amounts of undesirable formed Tars. In this paper, a Laser Induced Fluorescence spectroscopy (LIF) method was incorporated to identify the produced Tar compounds at high temperature in the gasification technology. The effect of tars deposition …

Indium Segregation To The Selvedge Of In4Se3 (001), Archit Dhingra, Zoe G. Marzouk, Esha Mishra, Pavlo V. Galiy, Taras M. Nenchuk, Peter Dowben

Peter Dowben Publications

Thermal motion of the surface atoms will lead to a decrease in photoemission intensity, while surface segregation may result in an increase of some phostoemission intensities. For In4Se3(001), both effects are seen. The Debye–Waller factor plot, based on the temperature dependent X-ray photoemission spectroscopy (XPS) measurements on In4Se3(001), suggests an upper bound of 203 ± 6 K for the effective Debye temperature, based on the surface component of the In 3d5/2 core-level. Indium is found to segregate to selvedge (subsurface region) of the crystal.

Emulating Condensed Matter Systems In Classical Wave Metamaterials, Matthew Weiner

Dissertations, Theses, and Capstone Projects

One of the best tools we have for the edification of physics is the analogy. When we take our classical set of states and dynamical variables in phase space and treat them as vectors and Hermitian operators respectively in Hilbert space through the canonical quantization, we lose out on a lot of the intuition developed with the previous classical physics. With classical physics, through our own experiences and understanding of how systems should behave, we create easy-to-understand analogies: we compare the Bohr model of the atom to the motion of the planets, we compare electrical circuits to the flow of …

Electron Emission And Transport Properties Database For Spacecraft Charging Models, Phil Lundgreen

Theses and Dissertations

Modeling the rate and likelihood of spacecraft charging during spacecraft mission is critical to determine mission length, proposed spacec­raft attitude, and spacecraft design. The focus of this work is the creation and utilization of a database of secondary electron yield (SEY) measurements for a host of materials to increase accuracy in spacecraft modeling. Traditional methods of SEY data selection for input into spacecraft charging codes typically include the use of compiled materials databases incorporated in charging codes or selecting values from a specific scientific study. The SEY database allows users to select data inputs based upon the details associated with …

An Expanded Model Of Unmatter From Neutrosophic Logic Perspective: Towards Matter-Spirit Unity View, Florentin Smarandache, Victor Christianto, Robert Neil Boyd

Branch Mathematics and Statistics Faculty and Staff Publications

In Neutrosophic Logic, a basic assertion is that there are variations of about everything that we can measure; the variations surround three parameters called T, I, F (truth, indeterminacy, falsehood) which can take a range of values. A previous paper in IJNS, 2020 shortly reviews the links among aether and matter creation from the perspective of Neutrosophic Logic. In any case, matter creation process in nature stays a major puzzle for physicists, scientists and other science analysts. To this issue neutrosophic logic offers an answer: "unmatter." This paper examines an extended model of unmatter, to incorporate issue soul solidarity. So, …

Cooking Systems Using Aluminum Foam, Ryan Tetsuo Mizukami

Physics

In developing countries, the use of wood burning fires for cooking is cause for illness and death. With this in mind, research was conducted to develop a solar cooking device capable of cooking of soup within 15 mins in order to reduce the negative impacts of cooking with wood. Current methods of solar-based cooking, such as solar concentrators and solar tube ovens, are impractical. A small solar panel is a cost-effective way to produce energy but will not produce enough power to cook within a reasonable amount of time. Even if it is assumed that all of the energy produced …

Developing Arduino Coding Curriculum, Tyler Brown, Riley Bucheitte, Timothy Kidd

Summer Undergraduate Research Program (SURP) Symposium

No abstract provided.

Site Selective Adsorption Of The Spin Crossover Complex Fe(Phen)2(Ncs)2 On Au(111), Sumit Beniwal, Suchetana Sarkar, Felix Baier, Birgit Weber, Peter Dowben, Axel Enders

Peter Dowben Publications

The iron(II) spin crossover complex Fe(1,10-phenanthroline)₂(NCS)₂, dubbed Fe-phen, has been studied with scanning tunneling microscopy, after adsorption on the 'herringbone' reconstructed surface of Au(111) for sub-monolayer coverages. The Fe-phen molecules attach, through their NCS-groups, to the Au atoms of the fcc domains of the reconstructed surface only, thereby lifting the herringbone reconstruction. The molecules stack to form 1D chains, which run along the Au[110] directions. Neighboring Fe-phen molecules are separated by approximately 2.65 nm, corresponding to 9 atomic spacings in this direction. The molecular axis, defined by the two phenanthroline groups, is aligned perpendicular to the …

Generation Of Correlated Dual Frequency Combs With Pm Fiber Lasers For High-Precision Metrology, Hanieh Afkhamiardakani

Optical Science and Engineering ETDs

Intracavity Phase Interferometry (IPI) using two correlated, counter-propagating frequency combs (pulse trains) in mode-locked lasers has evolved into a powerful technique for high-precision metrology. In this method a physical parameter to be measured imparts a phase shift onto a pulse circulating in the laser cavity. Inside a laser cavity, that phase shift becomes a frequency shift (phase shift/round-trip time) applied to the whole frequency comb created by this pulse as it exits the cavity at each round-trip. This frequency shift is measured by interfering this comb with a reference comb created by a reference pulse circulating in the same mode-locked …

Growth Of Semi-Polar (11-22) Gan Epitaxial Layer On M-Plane Sapphire Via Mocvd, Anuar Mohd Afiq

Student Works (2020-2029)

In the past few years, semi-polar (11-22) GaN has attracted much intention in the field of optoelectronics including light-emitting diodes (LEDs), laser diodes (LDs) and photodetectors. Commercially, GaN-based optoelectronic devices are grown along c-plane direction. However, c-oriented GaN-based optoelectronics suffer from piezoelectric polarization, which hinders the device performances. Conversely, semi-polar (11-22) GaN exhibits almost zero piezoelectric polarization effect. Furthermore, as the GaN wurtzite lattice is inclined approximately 58° respective to c-plane, it provides more sites for doping incorporation such as indium, silicon, aluminium, etc. Therefore, the semi-polar (11-22) GaN is presumed to be one of a promising candidate for efficient …

Optimization Of The Automatic Operation Of The Plastic Crushing Machine, Yokubjon E. Kurbonov, Madaminjon K. Mahkamov, Nodirbek Sh. Kimsanboyev

Scientific Bulletin. Physical and Mathematical Research

The main costs in the production of plastic products that affect the cost of the product is the cost of materials. It accounts from 70% to 77% of all expenses. For this reason, the processing of plastic products and their use as secondary raw materials reduces the cost of production and leads to increased economic efficiency.

In order to obtain high-quality secondary raw materials by crushing plastic products, it is necessary to divide them into types before crushing. For classification and identification of plastic products, a fluorescent material is used to determine the composition and concentration of plastic. The result …

Development Of A Mobile Device For Drying Paddy, Botirali R. Bekkulov

Scientific Bulletin. Physical and Mathematical Research

The author of the article describes the results of scientific research aimed at creating a patented new design of a mobile drum device and ensuring an increase in the amount of paddy due to high-quality drying by substantiating its parameters. Firstly, an analysis of scientific research and patent information materials of existing devices for drying sludge working in a convective way, the existing advantages and the main disadvantages of existing devices are determined. Based on the analysis, the requirements of the newly developed device for drying the paddy are formed, theoretical research is carried out, the purpose of which was …