Engineering Physics Commons^™

Adherent Cells Avoid Polarization Gradients On Periodically Poled Litao3 Ferroelectrics, Christof Christophis, Elisabetta Ada Cavalcanti-Adam, Maximilian Hanke, Kenji Kitamura, Alexei Gruverman, Michael Grunze, Peter A. Dowben, Axel Rosenhahn

Peter Dowben Publications

The response of fibroblast cells to periodically poled LiTaO₃ ferroelectric crystals has been studied. While fibroblast cells do not show morphological differences on the two polarization directions, they show a tendency to avoid the field gradients that occur between polarization domains of the ferroelectric. The response to the field gradients is fully established after one hour, a time at which fibroblasts form their first focal contacts. If suspension cells, with a lower tendency to establish strong surface contacts are used, no influence of the field gradients is observed.

Infrared Phonon Modes In Multiferroic Single-Crystal Fete2o5br, K. H. Miller, X. S. Xu, H. Berger, V. Cracium, Xiaoxiang Xi, C. Martin, G. L. Carr, D. B. Tanner

Xiaoshan Xu Papers

Reflection and transmission as a function of temperature (7–300 K and 5–300 K respectively) have been measured on single crystals of the multiferroic compound FeTe₂O₅Br utilizing light spanning from the far infrared to the visible. The complex dielectric function and other optical properties were obtained via Kramers-Kronig analysis and by fits to a Drude-Lortentz model. Analysis of the anisotropic excitation spectra via Drude-Lorentz fitting and lattice dynamical calculations have led to the observation of 43 of the 53 modes predicted along the b axis of the monoclinic cell. The phonon response parallel to the a and …

Growth Diagram Of La0.7sr0.3mno3 Thin Films Using Pulsed Laser Deposition, Hangwen Guo, Dali Sun, Wenbin Wang, Zheng Gai, Ivan Kravchenko, Jian Shao, Lu Jiang, Thomas Z. Ward, Paul C. Snijders, Lifeng Yin, Jian Shao, Xiaoshan Xu

Xiaoshan Xu Papers

An experimental study was conducted on controlling the growth mode of La_0.7Sr_0.3MnO₃ thin films on SrTiO₃ substrates using pulsed laser deposition (PLD) by tuning growth temperature, pressure, and laser fluence. Different thin film morphology, crystallinity, and stoichiometry have been observed depending on growth parameters. To understand the microscopic origin, the adatom nucleation, step advance processes, and their relationship to film growth were theoretically analyzed and a growth diagram was constructed. Three boundaries between highly and poorly crystallized growth, 2D and 3D growth, stoichiometric and non-stoichiometric growth were identified in the growth diagram. A good …

Room-Temperature Multiferroic Hexagonal Lufeo3 Films, Wenbin Wang, Jun Zhao, Wenbo Wang, Zheng Gai, Nina Balke, Miaofang Chi, Ho Nyung Lee, Wei Tian, Leyi Zhu, Xuemei Cheng, David J. Keavney, Jieyu Yi, Thomas Z. Ward, Paul C. Snijders, Hans M. Christen, Weida Wu, Jian Shen, Xiaoshan Xu

Xiaoshan Xu Papers

The crystal and magnetic structures of single-crystalline hexagonal LuFeO₃ films have been studied using x-ray, electron, and neutron diffraction methods. The polar structure of these films are found to persist up to 1050 K; and the switchability of the polar behavior is observed at room temperature, indicating ferroelectricity. An antiferromagnetic order was shown to occur below 440 K, followed by a spin reorientation resulting in a weak ferromagnetic order below 130 K. This observation of coexisting multiple ferroic orders demonstrates that hexagonal LuFeO₃ films are room-temperature multiferroics.

Stacking Principle And Magic Sizes Of Transition Metal Nanoclusters Based On Generalized Wulff Construction, S. F. Li, X. J. Zhao, X. S. Xu, Y. F. Gao, Zhenyu Zhang

Xiaoshan Xu Papers

Nanoclusters with extra stability at certain cluster sizes are known as magic clusters with exotic properties. The classic Wulff construction principle, which stipulates that the preferred structure of a cluster should minimize its total surface energy, is often invoked in determining the cluster magicity, resulting in close-shelled Mackay icosahedronal clusters with odd-numbered magic sizes of 13, 55, 147, etc. Here we use transition metal clusters around size 55 as prototypical examples to demonstrate that, in the nanometer regime, the classic Wulff construction principle needs to be generalized to primarily emphasize the edge atom effect instead of the surface energy. Specifically, …

A Tunable Electromagnetic Band-Gap Microstrip Filter, Greg A. Lancaster

Master's Theses

In high frequency design, harmonic suppression is a persistent struggle. Non-linear devices such as switches and amplifiers produce unwanted harmonics which may interfere with other frequency bands. Filtering is a widely accepted solution, however there are various shortcomings involved. Suppressing multiple harmonics, if desired, with traditional lumped element and distributed component band-stop filters requires using multiple filters. These topologies are not easily made tunable either. A new filter topology is investigated called Electromagnetic Band-Gap (EBG) structures.

EBG structures have recently gained the interest of microwave designers due to their periodic nature which prohibits the propagation of certain frequency bands. EBG …

Oblique-Length Contraction Factor In The Special Theory Of Relativity, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper one generalizes the Lorentz Contraction Factor for the case when the lengths are moving at an oblique angle with respect to the motion direction. One shows that the angles of the moving relativistic objects are distorted.

Scaling Of The Coercive Field In Ferroelectrics At The Nanoscale, R. V. Gaynutdinov, M. Minnekaev, S. Mitko, A. L. Tolstikhina, A. Zenkevich, Stephen Ducharme, Vladimir M. Fridkin

Stephen Ducharme Publications

The scaling of the coercive field in ferroelectric films at the nanoscale is investigated experimentally. The scaling in the films of copolymer vinylidene fluoride and BaTiO3 with thickness equal by the order of value to the critical domain nucleus size 1–10 nm reveals deviation from the well-known Kay–Dunn law. At this thickness region coercive field does not depend on thickness and coincides with Landau–Ginzburg–Devonshire value.

Changing Molecular Band Offsets In Polymer Blends Of (P3ht/P(Vdf–Trfe)) Poly(3-Hexylthiophene) And Poly(Vinylidene Fluoride With Trifluoroethylene) Due To Ferroelectric Poling, Freddy Wong, Godohaldo Perez, Manuel Bonilla, Juan A. Colon-Santana, Xin Zhang, Pankaj Sharma, Alexei Gruverman, Peter A. Dowben, Luis G. Rosa

Peter Dowben Publications

Photoelectron emission and inverse photoemission spectroscopy studies of polymer blends of poly(vinylidene fluoride (70%) – trifluoroethylene (30%)) P(VDF–TrFE 70 : 30) and regio-regular poly(3- hexylthiophene) (P3HT) provide evidence of changes in the molecular band offsets as a result of changes in the ferroelectric polarization in P(VDF–TrFE). Investigation of the blends with higher concentrations of the semiconducting P3HT component revealed that the organic semiconductor component of the blend dominates the electronic structure in the vicinity of the chemical potential. Specifically, the states of P3HT at the conduction band minimum and valence band maximum fall within the HOMO–LUMO gap of the dielectric …

Induced Magneto-Electric Coupling In Ferroelectric/Ferromagnetic Heterostructures, Jeffery Carvell, Ruihua Cheng, Peter A. Dowben, Q Yang

Peter Dowben Publications

Using an external magnetic field, we have demonstrated room temperature control of the electric polarization of a ferroelectric polymer, polyvinylidene fluoride (PVDF), in an artificial multiferroic structure. For ferroelectric PVDF polymer thin films in an iron-PVDF-iron heterostructure, both the ferroelectric coercivity and polarization display a hysteresis dependence on the external magnetic field. We also find that the thickness of the PVDF layer has an effect on the magnetoelectric coupling in our samples. We observe a giant magnetoelectric coupling with values as large as 3700 V/cm Oe to 41700 V/cm Oe.

Magnetoelectric Coupling At The Euo/Batio3 Interface, Shi Cao, P Liu, Jinke Tang, Haidong Lu, C W. Bark, Sangjin Ryu, Chang-Beom Eom, Alexei Gruverman, Peter A. Dowben

Peter Dowben Publications

Magnetization modulation by ferroelectric polarization switching is reported for the ferromagnetic-ferroelectric EuO/BaTiO₃heterostructure. The value of the magnetization critical exponent β is consistent with the expected Heisenberg-like ferromagnetism of EuO and reported Curie temperature. The critical exponent is seen to decrease with increased magnetic coupling. The results are discussed in the context of data obtained earlier for epitaxial La_0.67Sr_0.33MnO₃/BaTiO₃ heterostructures, where magnetization increases and critical exponent b also declines with ferroelectric polarization pointing away from ferromagnetic layer. The observed similarity between two systems illustrates an importance of charge doping in magnetoelectric coupling, …

Adsorption Of Tcnqh-Functionalized Quinonoid Zwitterions On Gold And Graphene: Evidence For Dominant Intermolecular Interactions+, Lingmei Kong, Lucie Routaboul, Pierre Braunstein, Hong-Gi Park, Jaewu Choi, John P. Colon Cordova, E Vega, Luis G. Rosa, Bernard Doudin, Peter A. Dowben

Peter Dowben Publications

We experimentally investigate the electronic structure of the strongly dipolar, quinonoid-type molecule obtained by TCNQH-functionalization (TCNQH = (NC)₂CC₆H₄CH(CN)₂) of (6Z)-4-(butylamino)-6-(butyliminio)- 3-oxocyclohexa-1,4-dien-1-olate C₆H₂(...NHR)₂(...O)₂ (where R = n-C₄H₉) to be very similar after deposition from solution on either graphene or gold substrates. These zwitterion adsorbate thin films form structures that are distinct from those formed by related quinonoid molecules previously studied. We argue that adsorbate–adsorbate interactions dominate and lead to a Stranski–Krastanov ‘island growth’ mechanism.

Applications Of High Throughput (Combinatorial) Methodologies To Electronic, Magnetic, Optical, And Energy-Related Materials, Martin L. Green, Ichiro Takeuchi, Jason R. Hattrick-Simpers

Faculty Publications

High throughput (combinatorial) materials science methodology is a relatively new research paradigm that offers the promise of rapid and efficient materials screening, optimization, and discovery. The paradigm started in the pharmaceutical industry but was rapidly adopted to accelerate materials research in a wide variety of areas. High throughput experiments are characterized by synthesis of a “library” sample that contains the materials variation of interest (typically composition), and rapid and localized measurement schemes that result in massive data sets. Because the data are collected at the same time on the same “library” sample, they can be highly uniform with respect to …

Compact Superconducting Crabbing And Deflecting Cavities, Subashini De Silva

Physics Faculty Publications

Recently, new geometries for superconducting crabbing and deflecting cavities have been developed that have significantly improved properties over those the standard TM110 cavities. They are smaller, have low surface fields, high shunt impedance and, more importantly for some of them, no lower-order-mode with a well-separated fundamental mode. This talk will present the status of the development of these cavities.

Superconducting Rf-Dipole Deflecting And Crabbing Cavities, Subashini De Silva, Jean R. Delayen

Physics Faculty Publications

Recent interests in compact deflecting and crabbing structures for future accelerators and colliders have initiated the development of novel rf structures. The superconducting rf-dipole cavity is one of the first compact designs with attractive properties such as high gradients, high shunt impedance, the absence of lower order modes, and widely separated higher order modes. Two rf-dipole cavities at 400 MHz and 499 MHz have been designed, fabricated and tested as proof-of-principle designs of compact deflecting and crabbing cavities for the LHC high luminosity upgrade and Jefferson Lab 12 GeV upgrade. The first rf tests have been performed on the rf-dipole …

Compact Superconducting Rf-Dipole Cavity Designs For Deflecting And Crabbing Applications, Subashini De Silva, Jean R. Delayen, A. Castilla

Physics Faculty Publications

Over the years the superconducting parallel-bar design has evolved into an rf-dipole cavity with improved properties. The new rf-dipole design is considered for a number of deflecting and crabbing applications. Some of those applications are the 499 MHz rf separator system for the Jefferson Lab 12 GeV upgrade, the 400 MHz crabbing cavity system for the proposed LHC high luminosity upgrade, and the 750 MHz crabbing cavity for the medium energy electron-ion collider in Jefferson Lab. In this paper we present the optimized rf design in terms of rf performance including rf properties, higher order modes (HOM) properties, multipacting, and …

Hom Damping Coupler Design For The 400-Mhz Rf Dipole Compact Crab Cavity For The Lhc Hilumi Upgrade, Zenghai Li, Lixin Ge, Jean R. Delayen, Subashini U. De Silva

Physics Faculty Publications

Crab cavities are adapted as the baseline design for the LHC HiLumi upgrade to achieve head-on beam-beam collisions for further improvement in luminosity. A 400- MHz compact RF dipole crab cavity design was developed by a joint effort between Old Dominion University and SLAC under the support of US LARP program. This design has shown very favorable RF parameters and can fit into the available beamline spacing for both vertical and horizontal crabbing schemes. A niobium proof-of-principle cavity based on such a design has been manufactured for vertical test. In addition, there are stringent wakefield requirements that needed to be …

Compact Accelerator Design For A Compton Light Source, Todd Satogata, Kirsten Deitrick, Jean Delayen, B.R.P. Gamage, K. Hernández-Chahín, C. Hopper, Geoffrey Krafft, Rocio Olave

Physics Faculty Publications

A compact electron accelerator suitable for Compton source applications is in design at the Center for Accelerator Science at Old Dominion University and Jefferson Lab. The design includes a KE=1.55 MeV low-emittance, optimized superconducting electron gun; a 23.45 MeV linac with multi-spoke 4.2 K superconducting cavities; and transport that combines magnetic longitudinal bunch compressor and transverse final focus. We report on the initial designs of each element, including end to end simulations with ASTRA and elegant, and expected beam parameters.

Multipole Expansion Of The Fields In Superconducting High-Velocity Spoke Cavities, R. G. Olave, Jean R. Delayen, C. S. Hopper

Physics Faculty Publications

Multi-spokes superconducting cavities in the high-beta regime are being considered for a number of applications. In order to accurately model the dynamics of the particles in such cavities, knowledge of the fields off-axis are needed. We present a study of the multipoles expansion of the fields from an EM simulation field data for two-spokes cavities operating at 325 MHz, β = 0.82, and 500 MHz, β = 1.

Effect Of Vortex Hotspots On The Radio-Frequency Surface Resistance Of Superconductors, A. Gurevich, G. Ciovati

Physics Faculty Publications

We present detailed experimental and theoretical investigations of hotspots produced by trapped vortex bundles and their effect on the radio-frequency (rf) surface resistance Rs of superconductors at low temperatures. Our measurements of Rs, combined with the temperature mapping and laser scanning of a 2.36-mm-thick Nb plate incorporated into a 3.3-GHz Nb resonator cavity cooled by the superfluid He at 2 K, revealed spatial scales and temperature distributions of hotspots and showed that they can be moved or split by thermal gradients produced by the scanning laser beam. These results, along with the observed hysteretic field dependence of Rs which can …

Magnetic Bunch Compression For A Compact Compton Source, B.R.P. Gamage, T. Satogata

Physics Faculty Publications

A compact electron accelerator suitable for Compton source applications is in design at the Center for Accelerator Science at Old Dominion University and Jefferson Lab. Here we discuss two options for transverse magnetic bunch compression and final focus, each involving a 4-dipole chicane with M56 tunable over a range of 1.5-2.0m with independent tuning of final focus to interaction point \beta*=5mm. One design has no net bending, while the other has net bending of 90 degrees and is suitable for compact corner placement.

Mechanical Analysis Of The 400 Mhz Rf-Dipole Crabbing Cavity Prototype For Lhc High Luminosity Upgrade, S. U. De Silva, H. Park, J. R. Delayen, Z. Li

Physics Faculty Publications

The proposed LHC high luminosity upgrade requires two crabbing systems in increasing the peak luminosity, operating both vertically and horizontally at two interaction points of IP1 and IP5. The required system has tight dimensional constraints and needs to achieve higher operational gradients. A proof-of-principle 400 MHz crabbing cavity design has been successfully tested and has proven to be an ideal candidate for the crabbing system. The cylindrical proof-of-principle rf-dipole design has been adapted in to a square shaped design to further meet the dimensional requirements. The new rf-dipole design has been optimized in meeting the requirements in rf-properties, higher order …

Multipole Field Effects For The Superconducting Parallel-Bar/Rf-Dipole Deflecting/Crabbing Cavities, S. U. De Silva, J. R. Delayen

Physics Faculty Publications

The superconducting parallel-bar deflecting/crabbing cavity is currently being considered as one of the design options in rf separation for the Jefferson Lab 12 GeV upgrade and for the crabbing cavity for the proposed LHC luminosity upgrade. Knowledge of multipole field effects is important for accurate beam dynamics study of rf structures. The multipole components can be accurately determined numerically using the electromagnetic surface field data in the rf structure. This paper discusses the detailed analysis of those components for the fundamental deflecting/crabbing mode and higher order modes in the parallel-bar deflecting/crabbing cavity.

Study Of Cavity Imperfection Impact On Rf-Parameters And Multipole Components In A Superconducting Rf-Dipole Cavity, R. G. Olave, J. R. Delayen, S. U. De Silva, Z. Li

Physics Faculty Publications

The ODU/SLAC superconducting rf-dipole cavity is under consideration for the crab-crossing system in the upcoming LHC luminosity upgrade. While the proposed cavity complies well within the rf-parameters and multipolar component restrictions for the LHC system, cavity imperfections arising from cavity fabrication, welding and frequency tuning may have a significant effect in these parameters. We report on an initial study of the impact of deviation from the ideal shape on the cavity’s performance in terms of rf-parameters and multipolar components.

Comparison Of Electromagnetic, Thermal And Mechanical Calculations With Rf Test Results In Rf Dipole Deflecting/Crabbing Cavities, H. Park, S. U. Silva, J. R. Delayen

Physics Faculty Publications

The current requirements of higher gradients and strict dimensional constraints in the emerging applications have required the designing of compact deflecting and crabbing rf structures. The superconducting rf-dipole cavity is one of the first novel compact designs with attractive properties such as higher gradients, higher shunt impedance and widely separated higher order modes. The recent tests performed on proof-of-principle designs of the rf-dipole geometry at 4.2 K and 2.0 K in a vertical test assembly have proven the designs to achieve higher gradients with higher intrinsic quality factors and easily processed multipacting conditions. The design frequency sensitivity to pressure (df/dp) …

Tests Of An Rf Dipole Crabbing Cavity For An Electron-Ion Collider, A. Castilla, J. R. Delayen

Physics Faculty Publications

On the scheme of developing a medium energy electron-ion collider (MEIC) at Jefferson Lab, we have designed a compact superconducting rf dipole cavity at 750 MHz to crab both electron and ion bunches and increase luminosities at the interaction points (IP) of the machine. Following the design optimization and characterization of the electromagnetic properties such as peak surface fields and shunt impedance, along with field nonuniformities, multipole components content, higher order modes (HOM) and multipacting, a prototype cavity was built by Niowave Inc. The 750 MHz prototype crab cavity has been tested at 4 K and is ready for re-testing …

Geometry Effects On Multipole Components And Beam Optics In High-Velocity Multi-Spoke Cavities, C. S. Hopper, K. Deitrick, J. R. Delayen

Physics Faculty Publications

Velocity-of-light, multi-spoke cavities are being proposed to accelerate electrons in a compact light-source [1]. There are strict requirements on the beam quality which require that the linac have only small non-uniformities in the accelerating field. Beam dynamics simulations have uncovered varying levels of focusing and defocusing in the proposed cavities, which is dependent on the geometry of the spoke in the vicinity of the beam path. Here we present results for the influence different spoke geometries have on the multipole components of the accelerating field and how these components, in turn, impact the simulated beam properties.

Demonstration Of A Novel Technique To Measure Two-Photon Exchange Effects In Elastic E±P Scattering, M. Niroula, L. B. Weinstein, D. Adikaram, J. Lanchiet, K. P. Adhikari, M. J. Amaryan, R. P. Bennett, C. E. Hyde, S.E. Kuhn, H. Seraydaryan

Physics Faculty Publications

Background: The discrepancy between proton electromagnetic form factors extracted using unpolarized and polarized scattering data is believed to be a consequence of two-photon exchange (TPE) effects. However, the calculations of TPE corrections have significant model dependence, and there is limited direct experimental evidence for such corrections.

Purpose: The TPE contributions depend on the sign of the lepton charge in e±p scattering, but the luminosities of secondary positron beams limited past measurement at large scattering angles, where the TPE effects are believe to be most significant. We present the results of a new experimental technique for making direct e±p comparisons, which …

Interaction Region Design And Detector Integration At Jlab's Meic, F. Lin, P. Brindza, Y. S. Derbenev, V. S. Morozov, R. Ent, P. Nadel-Turonski, Y. Zhang, C. E. Hyde, M. Sullivan

Physics Faculty Publications

The Electron Ion Collider (EIC) will be a next-generation facility for the study of the strong interaction (QCD). JLab's MEIC is designed for high luminosities of up to 10³⁴ cm^-² s^-¹. This is achieved in part due to an aggressively small beta-star, which imposes stringent requirements on the collider rings' dynamical properties. Additionally, one of the unique features of MEIC is a full-acceptance detector with a dedicated, small-angle, high-resolution detection system, capable of covering a wide range of momenta (and charge-to-mass ratios) with respect to the original ion beam to enable access to new physics. The detector …

Computational Fluid Dynamics (Cfd) Modeling Of A Laboratory Scale Coal Gasifier, Kiel S. Schultheiss

College of Graduate Studies: Theses & Dissertations

Furthering gasification technology is an essential part of advancing clean coal technologies. In order to seek insight into the appropriate operations for the formation of synthetic gas (syngas) a numerical simulation was performed to predict the phenomena of coal gasification in a laboratory scale entrained-flow coal gasifier. The mesh for the model was developed with ICEM CFD software and the chemical and physical phenomena were modeled using the fluid flow solver ANSYS FLUENT. Mesh independence was verified. The model was validated with experimental data from several studies performed on a laboratory scale gasifier.

Systematic examination of the model was performed …