Engineering Physics Commons^™

Electron-Ion Collider Performance Studies With Beam Synchronization Via Gear-Change, I. Neththikumara, Geoffrey A. Krafft, Y. Roblin, Balša Terzić

Physics Faculty Publications

Beam synchronization of the future electron-ion collider (EIC) is studied with introducing different bunch numbers in the two colliding beams. This allows non-pairwise collisions between the bunches of the two beams and is known as "gear-change", whereby one bunch of the first beam collides with all other bunches of the second beam, one at a time. Here we report on the study of how the beam dynamics of the Jefferson Lab Electron Ion collider concept is affected by the gear change. For this study, we use the new GPU-based code (GHOST). It features symplectic one-turn maps for particle tracking and …

New Simulations For Ion-Production And Back-Bombardment In Gaas Photo-Guns, Josh Yoskowitz, J. Grames, J. Hansknecht, C. Hernandez-Garcia, G. Krafft, M. Poelker, R. Suleiman, G. Palacios-Seranno, S. Wijethunga, B. Van Der Geer

Physics Faculty Publications

GaAs-based DC high voltage photo-guns used at accelerators with extensive user programs must exhibit long photocathode operating lifetime. Achieving this goal represents a significant challenge for proposed high average current facilities that must operate at tens of milliamperes or more. Specifically, the operating lifetime is dominated by ion back-bombardment of the photocathode from ionized residual gas. While numerous experiments have been performed to characterize the operating lifetime under various conditions, detailed simulations of the ion back-bombardment mechanism that explains these experiments are lacking. Recently, a new user routine was implemented using the code General Particle Tracer (GPT) to simulate electron …

Beam-Beam Effect: Crab Dynamics Calculation In Jleic, He Huang, Vasiliy Morozov, Yves Roblin, Amy Sy, Fanglei Lin, Yuhong Zhang, Balša Terzić, Salvador Sosa, Isurumali Neththikumara

Physics Faculty Publications

The electron and ion beams of a future Electron Ion Collider (EIC) must collide at an angle for detection, machine and engineering design reasons. To avoid associated luminosity reduction, a local crabbing scheme is used where each beam is crabbed before collision and de-crabbed after collision. The crab crossing scheme then provides a head-on collision for beams with a non-zero crossing angle. We develop a framework for accurate simulation of crabbing dynamics with beam-beam effects by combining symplectic particle tracking codes with a beam-beam model based on the Bassetti-Erskine analytic solution. We present simulation results using our implementation of such …

Maximum Performance Of Cavities Affected By The High-Field Q-Slope (Hfqs), G. Ciovati, A.V. Gurevich, I. P. Parajuli

Physics Faculty Publications

The performance of high-purity, bulk niobium SRF cavities treated by chemical processes such as BCP or EP is limited by the so-called high-field Q-slope (HFQS). Several models and experimental studies have been proposed and performed over the years to understand the origin of these anomalous losses but a general consensus on what these origins are is yet to be established. In this contribution, we present the results from the RF tests of several 1.3 GHz single-cell cavities limited by the HFQS and tested using a variable input coupler. This allowed to maintain close to critical coupling even at high field …

Loi: Next Generation Tritium Experiments In Clas12, D. Gaskell, D. W. Higinbotham, D. Meekins, A. Ashkenazi, A. Denniston, R. Cruz-Torres, O. Hen, D. Nguyen, A. Papadopoulou, J. Pybus, A. Schmidt, E. P. Segarra, D. Dutta, Z. Ye, F. Hauenstein, M. Khachatryan, L. B. Weinstein, E. Piasetzky, S. Sirca, M. Mihovilovic, T. Kolar

Physics Faculty Publications

This LOI includes information on possible experiments for an experimental program using a new tritium target in CLAS12. It includes several pieces, including flavor tagged DIS on d, ³He, and ³H targets, and quasielatic scattering. A preliminary feasibility study indicates that a tritium target in Hall B is possible. We are submitting this LOI to get feedback from the PAC whether it is worth the effort of developing a full proposal, including significantly more work on the possible Hall B tritium target.

The bulk of the LOI discusses the flavor-tagged DIS measurement.

Question 1: I'M Stoked!; Question 2: Geckos, Larry Weinstein

Physics Faculty Publications

A quiz is presented about the maximum power of steam engines and the number of geckos needed to apply enough force to lift a typical glass window pane.

Question 1: Driving Rain, Question 2: Cooking Off Ammo, Larry Weinstein

Physics Faculty Publications

The article presents two questions on topics including calculation of highway gas mileage decrease in heavy rain and initial velocity of a bullet in case the propellant in its cartridge exploded outside of a gun.

Solutions For Fermi Questions, March 2019: Question 1: I'M Stoked!; Question 2: Geckos, Larry Weinstein

Physics Faculty Publications

The article presents questions and answers concerning the maximum power that a coal-power steam engine can attain and the number of geckos needed to lift a glass window pane and a plate-glass window.

Measurement Of Surface Resistance Properties With Coaxial Resonators - Review, Hyekyoung Park, Subashini De Silva, J. R. Delayen

Physics Faculty Publications

Achieving ever decreasing surface resistance at higher field in superconducting RF accelerating structures is one of most outstanding developments in modern accelerators. The BCS theory has been used widely to estimate the surface resistance and to direct the technology. However, recent research results show that the behavior of the surface resistance further deviates from the BCS theory. So far the study on surface resistance was performed usually with cavities of single frequency which limited the study of frequency dependent surface resistance. The Center for Accelerator Science at Old Dominion University has designed and built several half wave coaxial cavities to …

Design Of A Proof-Of-Principle Crabbing Cavity For The Jefferson Lab Electron-Ion Collider, Hyekyoung Park, Subashini U. De Silva, Salvador I. Sosa Guitron, Jean R. Delayen

Physics Faculty Publications

The Jefferson Lab design for an electron-ion collider (JLEIC) requires crabbing of the electron and ion beams in order to achieve the design luminosity. A number of options for the crabbing cavities have been explored, and the one which has been selected for the proof-of-principle is a 952 MHz, 2-cell rf-dipole (RFD) cavity. This paper summarizes the electromagnetic design of the cavity and its HOM characteristics.

Measurement Of The Magnetic Field Penetration Into Superconducting Thin Films, Iresha Harshani Senevirathne, Gianluigi Ciovati, Jean R. Delayen

Physics Faculty Publications

The magnetic field at which first flux penetrates is a fundamental parameter characterizing superconducting materials for SRF cavities. Therefore, an accurate technique is needed to measure the penetration of the magnetic field directly. The conventional magnetometers are inconvenient for thin superconducting film measurements because these measurements are strongly influenced by orientation, edge and shape effects. In order to measure the onset of field penetration in bulk, thin films and multi-layered superconductors, we have designed, built and calibrated a system combining a small superconducting solenoid capable of generating surface magnetic field higher than 500 mT and Hall probe to detect the …

Two-Energy Storage-Ring Electron Cooler For Relativistic Ion Beams, Bhawin Dhital, Jean R. Delayen, Y. S. Derbenev, D. Douglas, Geoffrey A. Krafft, F. Lin, V. S. Morozov, Y. Zhang

Physics Faculty Publications

An electron beam based cooling system for the ion beam is one of the commonly used approaches. The proposed two’energy storage-ring electron cooler consists of damping and cooling sections at markedly different energies connected by an energy recovering superconducting RF structure. The parameters in the cooling and damping sections are adjusted for optimum cooling of a stored ion beam and for optimum damping of the electron beam respectively. This paper briefly describes a two cavities model along with a third cavity model to accelerate and decelerate the electron beam in two energy storage ring. Based on our assumed value of …

Improving Performance Of Inverse Compton Sources Through Laser Chirping, Balsa Terzić, A. Brown, I. Drebot, T. Hagerman, E. Johnson, Geoffrey A. Krafft, C. Maroli, V. Petrillo, M. Ruijter

Physics Faculty Publications

We present a new method for computation of radiation spectra in the non-linear regime of operation of inverse Compton sources characterized by high laser intensities. The resulting simulations agree well with the experiments. Increasing the laser intensity changes the longitudinal velocity of the electrons during their collision, leading to considerable non-linear broadening in the scattered radiation spectra. The effects of such ponderomotive broadening are so deleterious that most inverse Compton sources either remain at low laser intensities or pay a steep price to operate at a small fraction of the physically possible peak spectral output. This ponderomotive broadening can be …

Cryogenic Test Results Of The Sps Prototype Rf-Dipole Crabbing Cavity With Higher Order Mode Couplers, Subashini De Silva, H. Park, Jean R. Delayen, Z. Li

Physics Faculty Publications

The rf-dipole crabbing cavity planned for the LHC High Luminosity Upgrade is designed to deliver a transverse kick of 3.34 MV; crabbing the proton beam in the horizontal plane. The proton beams of the LHC machine operating at 7 TeV each sets high impedance thresholds on the crabbing cavity systems. The rf-dipole crabbing cavity is designed with a two higher order mode couplers to suppress those HOMs. The first prototype of the HOM couplers are fabricated at Jefferson Lab. This paper reports the cryogenic test results of the HOM couplers with the SPS prototype rf-dipole cavity.

Room Temperature Measurements Of Higher Order Modes For The Sps Prototype Rf Dipole Crabbing Cavity, Subashini De Silva, P. Berrutti, Jean R. Delayen, N. A. Huque, Hyekyoung Park

Physics Faculty Publications

LHC High Luminosity Upgrade will be developing two local crabbing systems to increase the luminosity of the colliding bunches at the ATLAS and CMS experiments. One of the crabbing systems uses the rf-dipole cavity design that will be crabbing the beam in the horizontal plane. The fully integrated crabbing cavity has two higher order mode couplers in damping those excited modes. Currently two sets of HOM couplers have been fabricated at Jefferson Lab for prototyping and testing with the LARP crabbing cavities. This paper presents the measurements of the higher order modes with the prototype HOM couplers carried out at …

Lessons Learned From Rf-Dipole Prototype Cavities For Lhc High Luminosity Upgrade, Subashini De Silva, Jean R. Delayen, Z. Li, H. Park

Physics Faculty Publications

The RF-Dipole Crabbing Cavity designed for the LHC High Luminosity Upgrade includes two higher order mode (HOM) couplers. One of the HOM couplers is an rf filter, which is a high pass filter designed to couple to the horizontal dipole modes and accelerating modes up to 2 GHz, while rejecting the fundamental operating mode at 400 MHz. The coupler consists of a high pass filter circuit where the rejection of the operating mode and transmission of HOMs are sensitive to dimensional deviations. An rf test box has been designed to measure the transmission of the rf filter in order to …

Measurements Of Frequency, Temperature, Rf Field Dependent Surface Resistance Using Superconducting Half-Wave Cavity, Hyekyoung Park, Subashini De Silva, Jean R. Delayen

Physics Faculty Publications

A theory of surface resistance of superconductor was rigorously formulated by Bardeen, Cooper, Schrieffer more than 50 years ago. Since then the accelerator community has been used the theory as a guideline to improve the surface resistance of the superconducting cavity. It has been observed that the surface resistance is dependent on frequency, temperature and rf field strength, and surface preparation. To verify these dependences, a well-controlled study is required. Although many different types of cavities have been tested, the typical superconducting cavities are built for specific frequencies of their application. They do not provide data other than at its …

Coupled Bunch Instability From Jleic Crab Cavity Higher Order Modules, S. I. Sosa, R. Li, H. Park, S. De Silva, V. S. Morozov, J. R. Delayen

Physics Faculty Publications

Particle bunches traveling in a ring can excite wakefields inside any radio-frequency element present. These electromagnetic modes can resonate long enough and interact with subsequent passing bunches. A coherent oscillation between bunches can quickly become an instability and needs to be addressed. The Jefferson Lab electron ion collider has a large 50 mrad crossing angle and thus relies on bunch crabbing to achieve high luminosity. Bunch crabbing is done with compact superconducting rf dipole cavities. We study coupled bunch oscillations driven by the higher order modes of multicell RFD crab cavities under study for JLEIC, we calculate the instability growth …

Production Of Magnetized Electron Beam From A Dc High Voltage Photogun, M.A. Mamun, P.A. Adderly, J. Benesch, B. Bullard, J. Delayen, J. Grames, J. Guo, F. Hannon, J. Hansknecht, C. Hernandez-Garcia, R. Kazimi, Geoffrey Krafft, M. Poelker, R. Suleiman, M. Tiefenback, Y. Wang, Sajini Wijethunga, S. Zhang

Physics Faculty Publications

Bunched-beam electron cooling is a key feature of all proposed designs of the future electron-ion collider, and a requirement for achieving the highest promised collision luminosity. At the Jefferson Lab Electron Ion Collider (JLEIC), fast cooling of ion beams will be accomplished via so-called 'magnetized cooling' implemented using a recirculator ring that employs an energy recovery linac. In this contribution, we describe the production of magnetized electron beam using a compact 300 kV DC high voltage photogun with an inverted insulator geometry, and using alkali-antimonide photocathodes. Beam magnetization was assessed using a modest diagnostic beamline that includes YAG view screens …

Mobile Free-Electron Laser For Remote Atmospheric Survey, S. Johnson, Balša Terzić, Geoffrey A. Krafft

Physics Faculty Publications

Reliable atmospheric surveys for carbon distributions will be essential to building an understanding of the Earth's carbon cycle and the role it plays in climate change. One of the core needs of NASA 's Active Sensing of CO2 Over Nights, Days and Seasons (ASCENDS) Mission is to advance the range and precision of current remote atmospheric survey techniques. The feasibility of using accelerator-based sources of infrared light to improve current airborne lidar systems has been explored. A literary review has been conducted to asses the needs of ASCENDS versus the current capabilities of modern atmospheric survey technology, and the parameters …

300 Kv Dc High Voltage Photogun With Inverted Insulator Geometry And Csk₂Sb Photocathode, Y.W. Wang, P.A. Adderley, J. F. Benesch, D.B. Bullard, J.M. Grames, F. E. Hannon, J. Hansknecht, C. Hernandez-Garcia, R. Kazimi, Geoffrey A. Krafft, M. A. Mamun, G. G. Palacios Serrano, M. Poelker, R. Suleiman, M. G. Tiefenback, S.A.K. Wijethunga

Physics Faculty Publications

A compact DC high voltage photogun with inverted-insulator geometry was designed, built and operated reliably at 300 kV bias voltage using alkali-antimonide photocathodes. This presentation describes key electrostatic design features of the photogun with accompanying emittance measurements obtained across the entire photocathode surface that speak to field non-uniformity within the cathode/anode gap. A summary of initial photocathode lifetime measurements at beam currents up to 4.5 mA is also presented.

Geometry Tagging For Heavy Ions At Jleic, V. S. Morozov, A. Accardi, A. Sy, G. H. Wei, M. D. Baker, R. Dupré, M. Ehrhart, C. Fogler, C. E. Hyde, P. Nadel-Turonski, J. Stukes, T. Toll, L. Zheng

Physics Faculty Publications

Geometry tagging is an experimental technique for selecting event samples where one can, on a statistical basis, control the geometry of the collision in order to make more incisive physics measurements. Several physics measurements at the EIC would benefit significantly from the use of this technique, including studies of gluon anti-shadowing, studies of parton propagation, attenuation and hadronization in the nucleus, and ultimately the search for parton saturation. The JLEIC full-acceptance detector, with full acceptance to forward-going neutrons, protons and nuclear fragments and a high data-taking rate is ideally suited to such geometry tagging. We improve, tune, and apply existing …

First Test Results Of Superconducting Twin Axis Cavity For Erl Applications, Hyekyoung Park, Subashini De Silva, Jean R. Delayen, Andrew Hutton, Frank Marhauser

Physics Faculty Publications

RF superconducting (SRF) cavities with two beam pipes have been proposed in the past for energy recovery linac applications. The relatively complex geometry of those cavities presented a serious challenge for fabrication and surface processing. The main concerns have now been overcome with the fabrication and successful RF testing of a new elliptical twin-axis cavity proposed by Jefferson Lab (JLab) and optimized by the Center for Accelerator Science (CAS) at Old Dominion University (ODU) in the framework of a DoE accelerator stewardship program. The cavity design provides uniform accelerating or decelerating fields for both beams. This paper describes the cavity …

Cryogenic Probe Station At Old Dominion University Center For Accelerator Science, Junki Makita, Jean R. Delayen, Alex Gurevich, Gianluigi Ciovati

Physics Faculty Publications

With a growing effort in research and development of an alternative material to bulk Nb for a superconducting radiofrequency (SRF) cavity, it is important to have a cost effective method to benchmark new materials of choice. At Old Dominion University's Center for Accelerator Science, a cryogenic probe station (CPS) will be used to measure the response of superconductor samples under RF fields. The setup consists of a closed-cycle refrigerator for cooling a sample wafer to a cryogenic temperature, a superconducting magnet providing a field parallel to the sample, and DC probes in addition to RF probes. The RF probes will …

Determination Of The Field-Dependence Of The Surface Resistance Of Superconductors From Cavity Tests, Jean R. Delayen, Subashini De Silva, Hyekyoung Park

Physics Faculty Publications

Cryogenic tests of superconducting cavities yield an average surface resistance as a function of the peak surface magnetic field. An analytical formalism has been developed to extract the actual field dependence of the surface resistance from cavity tests and is applied to coaxial cavities and cavities of more complex geometries.

Rf Tests Of Rf-Dipole Prototype Crabbing Cavities For Lhc High Luminosity Upgrade, Subashini De Silva, Hyekyoung Park, Jean R. Delayen, Zi Li

Physics Faculty Publications

The superconducting rf-dipole crabbing cavity is one of the two crabbing cavity designs proposed for the LHC high luminosity upgrade. The proof-of-principle (P-o-P) rf-dipole cavity operating at 400 MHz has demonstrated performance exceeding the design specifications. The prototype cavity for SPS beam test has been designed to include the fundamental power coupler, HOM couplers, and all the ancillary components intended to meet the design requirements. The crab cavities will be installed in the SPS beam line prior to the installation in LHC; this will be the first crabbing cavity operation on a proton beam. The fabrication of two prototype rf-dipole …

Investigation Of The Surface Resistance Of Niobium Between 325 Mhz And 1300 Mhz Using A Coaxial Half-Wave Cavity, Hyekyoung Park, Jean R. Delayen, Subashini De Silva

Physics Faculty Publications

The Center for Accelerator Science at Old Dominion University has built a half-wave coaxial cavity (*) to measure the surface resistance of niobium as a function of frequency, temperature, rf field, preparation techniques, over a wide range of frequencies of interest for particle accelerators. The characteristics of the half-wave coaxial cavity provide these information on a same surface. The preliminary results showed clearly the frequency dependence of residual surface resistance (**). After establishing baseline, we have conducted a study of low temperature baking effect on the surface resistance under controlled environment. This paper will describe the details of the test …

Simulation Study Of The Magnetized Electron Beam, S.A.K. Wijethunga, J.F. Benesch, Jean R. Delayen, F. E. Hannon, Geoffrey A. Krafft, M. A. Poelker, R. Suleiman

Physics Faculty Publications

Electron cooling of the ion beam plays an important role in electron ion colliders to obtain the required high luminosity. This cooling efficiency can be enhanced by using a magnetized electron beam, where the cooling process occurs inside a solenoid field. This paper compares the predictions of ASTRA and GPT simulations to measurements made using a DC high voltage photogun producing magnetized electron beam, related to beam size and rotation angles as a function of the photogun magnetizing solenoid and other parameters.

Rf Superconductivity, Jean R. Delayen

Physics Faculty Publications

Tutorial, based on the "RF Superconductivity" course taught by J. Delayen at the US PAS.

Status Of The Bonus12 Radial Time Projection Chamber, Gabriel Charles, Stephen Bueltmann, Gail Dodge, Nathan Dzbenski, Mathieu Ehrhardt, Sebastian E. Kuhn, David Payette, Jiwan Poudel, Keith A. Griffioen, Pascal Baron, Irakli Mandjavidze, Eric Christy, I. Hakki Albayrak, Aruni Nadeeshani, Howard Fenker, Narbe Kalantarians, Jixie Zhang, Carlos Ayerbe Gayoso

Physics Faculty Publications

Part of the experimental program in Hall B of the Jefferson Lab, Virginia, USA is dedicated to studying neutron structure functions using deep inelastic scattering on nuclei. For this purpose, the BONuS12 experiment will detect low momentum recoil protons in coincidence with scattered electrons. The protons will be detected by a second-generation Radial Time Projection Chamber (RTPC) using triple Gas Electron Multiplier foils for amplification while the scattered electrons will be detected by the CLAS12 spectrometer installed in Hall B. The following article presents the status of the BONuS12 RTPC detector that will take data within the next 2 years. …