Engineering Physics Commons^™

A Comprehensive Investigation Of The Influence Of Geometric Structure On The Shape Memory Performance Of Nafion, Jade Thomas

Physics Undergraduate Honors Theses

While perfluorosulfonic acid (PFSA) membranes have primarily been used in fuel cells due to their chemical, thermal, and mechanical stability, one PFSA, Nafion, boasts two unique characteristics: a broad glass transition (~55 °C to 130 °C) and a temperature-persistent electrostatic network. The combination of these two characteristics endows Nafion with exceptional shape memory properties – the ability of a material to morph and transform into pre-programmed shapes when exposed to an external stimulus – with enhanced permanent shape memorization, and a potentially near-infinite number of temporary shape memorization. This study focused on expanding the base of knowledge surrounding Nafion’s shape …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Physics Undergraduate Honors Theses

Mechanical Exfoliation

Encapsulated 2d Materials And The Potential For 1d Electrical Contacts, Sarah Wittenburg

Physics Undergraduate Honors Theses

The utilization of two-dimensional materials and heterostructures, particularly graphene and hexagonal boron nitride, have garnered significant attention in the realm of nanoelectronics due to their unique properties and versatile functionalities. This study focuses on the synthesis and fabrication processes of monolayer graphene encapsulated between layers of hBN, aiming to explore the potential of these heterostructures for various electronic applications. The encapsulation of graphene within hBN layers not only enhances device performance but also shields graphene from environmental contaminants, ensuring long-term stability. Experimental techniques, including mechanical exfoliation and stamp-assisted transfer, are employed to construct three-layer stacks comprising hBN-graphene-hBN. The fabrication process …

A Comprehensive Investigation Of The Influence Of Geometric Structure On The Shape Memory Performance Of Nafion, Jade Thomas

Mechanical Engineering Undergraduate Honors Theses

While perfluorosulfonic acid (PFSA) membranes have primarily been used in fuel cells due to their chemical, thermal, and mechanical stability, one PFSA, Nafion, boasts two unique characteristics: a broad glass transition (~55 °C to 130 °C) and a temperature-persistent electrostatic network. The combination of these two characteristics endows Nafion with exceptional shape memory properties – the ability of a material to morph and transform into pre-programmed shapes when exposed to an external stimulus – with enhanced permanent shape memorization, and a potentially near-infinite number of temporary shape memorization. This study focused on expanding the base of knowledge surrounding Nafion’s shape …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Mechanical Engineering Undergraduate Honors Theses

Mechanical Exfoliation of Graphene is an often-overlooked portion of the fabrication of quantum devices, and to create more devices quickly, optimizing this process to generate better flakes is critical. In addition, it would be valuable to simulate test pulls quickly, to gain insight on flake quality of various materials and exfoliation conditions. Physical pulls of graphene at various temperatures, pull forces, and pull repetitions were analyzed and compared to the results of ANSYS simulations, solved for similar results. Using ANSYS’ ability to predict trends in exfoliations, flake thickness and coverage using stress and deflection analyses were investigated. Generally, both strongly …

First-Principles Study Of Doping Effects On Ferroelectricity And On Rashba Spin Splitting, Zegnet Yimer Muhammed

Graduate Theses and Dissertations

In this dissertation, we have thoroughly studied the effect of chemical and charge dopingon ferroelectrics (PbTiO3 and BaTiO3) and Rashba type semiconductor (BiTeI). In the first project, We investigate the polar instability and soft modes in electron-doped PbTiO3 using linear-response density functional calculations. Because, metallicity and ferroelectric-like polar distortion are mutually non-compatible, and their coexistence in the same system is an intriguing subject of fundamental interest in the field of structure phase transition. However, it is unclear what mechanism may extend the limit of metallicity that allows polar distortion. We find that ferroelectric instability can remarkably sustain up to an …

Development Of Deep Shear Wave Velocity Profiles And An Approach To Generate Site Signature Consistent Pseudo Shear Wave Velocity Profiles In The Mississippi Embayment, Ashraf Kamal Himel

Graduate Theses and Dissertations

This dissertation details the development of a surface wave method (SWM) technique to generate deep shear wave velocity profiles (VS profiles), applying this technique at 24 sites across the Mississippi embayment and developing an approach to generate pseudo site signature consistent VS profiles from velocity functions and fundamental frequency. In the presented SWM technique, active and passive source surface wave measurements are inverted along with fundamental frequency to develop a site signature consistent VS profile. Multiple transformation methods, including MSPAC, HRFK and FK are used to resolve experimental dispersion data from surface wave measurements. SWM VS profile at the Central …

Materials Design For Energy Applications Using Ab- Initio Calculations, Hind Hemaidee Alqurashi

Graduate Theses and Dissertations

The structural, dynamical, electronic, and thermoelectric properties of rock-salt and wurtzite Cd1-xZnxO alloys, VTiRhZ (Al, Ga, In, Si, Ge, Sn) and ZrTiRhZ (Ge, Sn) quaternary Heusler alloys (QHAs) were investigated using density functional theory (DFT) and semi-classical Boltzmann transport theory. From these calculations, the alloys were identified as potential materials for future thermoelectric applications. Furthermore, the magnetic and spin-polarization properties of these QHAs were investigated. The total magnetic moments were found to be integer values for all QHAs. In addition, all studied QHAs except VTiRhAl possess a half-metallic behavior with a 100% spin-polarization. The half-metallic ferromagnetic behavior makes them promising …

Study Of Thermoelectric And Lattice Dynamics Properties Of 2d Layered Mx (M = Sn, Pb; X = S, Se, Te) And Zrs2 Compounds Using First-Principles Approach, Abhiyan Pandit

Graduate Theses and Dissertations

The aim of this dissertation is the investigation of thermoelectric and lattice dynamics properties of two-dimensional (2D) MX (M = Sn, Pb; X = S, Se, Te) and ZrS2 compounds based on the first-principles density functional theory. The dimensionality reduction (e.g., using 2D structure) of bulk materials is found to have enhanced thermoelectric efficiency. This enhancement is attributed to the increase of the Seebeck coefficient as a result of higher electronic density of states near the Fermi level in low-dimensional materials. In addition, lowering the dimensionality increases phonon scattering near interfaces and surfaces in 2D materials, which leads to a …

Quantum Dots In Two-Dimensional Tungsten Diselenide, Jeb Allen Michael Stacy

Graduate Theses and Dissertations

This work focuses on the investigation of single and double quantum dots in two-dimensional transition metal dichalcogenide tungsten diselenide (WSe_2) as a means to evaluate the valley degree of freedom as a potential qubit and ambipolar tungsten diselenide monolayers as single photon sources. Gate-defined quantum dots in monolayer and bilayer WSe_2 were fabricated and characterized. Single dot devices are gated from above and below the WSe_2 to accumulate a hole gas. Temperature dependence of Coulomb-blockade peak height is consistent with single-level transport. Excited-state transport in the quantum dot is shown for both monolayer and bilayer devices. Magnetic field dependence of …

Controlling Magnetic Exchange And Anisotropy By Nonmagnetic Ligand Substitution In Layered M P X 3 ( M = Ni , Mn; X = S , Se), Rabindra Basnet, Kamila M. Kotur, Milosz Rybak, Cory Stephenson, Samuel Bishop, Carmine Autieri, Magdalena Birowska, Jin Hu

Physics Faculty Publications and Presentations

Recent discoveries in two-dimensional magnetism have intensified the investigation of van der Waals magnetic materials and further improved our ability to tune their magnetic properties. Tunable magnetism has been widely studied in antiferromagnetic metal thiophosphates MPX3. Substitution of metal ions M has been adopted as an important technique to engineer the magnetism in MPX3. In this work, we have studied the previously unexplored chalcogen X substitutions in MPX3 (M=Mn/Ni; X=S/Se). We synthesized the single crystals of MnPS3−xSex (0≤x≤3) and NiPS3−xSex (0≤x≤1.3) and investigated the systematic evolution of the magnetism with varying x. Our study reveals the effective tuning of magnetic …

Design, Fabrication, And Characterization Of An Array Of Graphene Based Variable Capacitors, Millicent Nkirote Gikunda

Graduate Theses and Dissertations

Since it was first isolated and characterized in 2004, graphene has shown the potential for a technological revolution. This is due to its amazing physical properties such as high electrical conductivity, high thermal conductivity, and extreme flexibility. Freestanding graphene membranes naturally possesses an intrinsic rippled structure, and these ripples are in constant random motion even room temperatures. Occasionally, the ripples undergo spontaneous buckling (change of curvature from concave to convex and vice versa) and the potential energy associated with this is a double well potential. This movement of graphene is a potential source of vibrational energy.

In this dissertation, we …

Lattice Dynamics, Mechanical Properties, Electronic Structure And Magnetic Properties Of Equiatomic Quaternary Heusler Alloys Crticoz (Z = Al, Si) Using First Principles Calculations, Eesha Andharia, Hind Alqurashi, Bothina Hamad

Physics Faculty Publications and Presentations

First principles calculations are performed to investigate the thermodynamical stability, dynamical, mechanical, electronic and magnetic properties of CrTiCoZ (Z = Al/Si) novel quaternary Heusler alloys. A Y-type III atomic configuration is found to be the most stable structure for both compounds. The lattice constant values obtained using GGA-PBE approach are 5.9368 Å and 5.7853 Å for CrTiCoAl and CrTiCoSi, respectively. Using the value of elastic moduli for both the compounds, the computed Pugh’s ratio value is 2.5 and 2.7 for CrTiCoAl and CrTiCoSi, respectively, which is higher than 1.75, indicating both the compounds are ductile in nature. The melting temperatures …

Sigesn Light-Emitting Devices: From Optical To Electrical Injection, Yiyin Zhou

Graduate Theses and Dissertations

Si photonics is a fast-developing technology that impacts many applications such as data centers, 5G, Lidar, and biological/chemical sensing. One of the merits of Si photonics is to integrate electronic and photonic components on a single chip to form a complex functional system that features compact, low-cost, high-performance, and reliability. Among all building blocks, the monolithic integration of lasers on Si encountered substantial challenges. Si and Ge, conventional epitaxial material on Si, are incompetent for light emission due to the indirect bandgap. The current solution compromises the hybrid integration of III-V lasers, which requires growing on separate smaller size substrates …

Interplay Between The Lattice And Spin Degrees Of Freedom In Magnetoelectric And Magnetic Materials, Temuujin Bayaraa

Graduate Theses and Dissertations

This dissertation contains several investigations on the cross-coupling between structural and spin degrees of freedom in multiferroic and ferrimagnetic compounds by means of first-principles calculations and ab-initio-based Monte-Carlo simulations. We start with the reviews of magnetoelectricity, ferrimagnetism, strain engineering, followed by a brief introduction to first-principles computational methods, magnetic effective Hamiltonians, and other techniques that are utilized here. The results section of the dissertation can be divided into two parts. The first half focuses on magnetoelectric effects arising from different sources, while the second half is about the ferrimagnetic nature of materials. In the first part, we examine the epitaxial …

Development And Characterization Of Monolayer And Sub-Monolayer Intermediate Band Solar Cells, Najla Alnami

Graduate Theses and Dissertations

Intermediate band solar cell (IBSC) is a new generation solar cell that is designed to overcome the main limitation of solar cell power conversion efficiency, which is the non-absorption of low photon energy. Experimental efforts towards fabricating high efficiency and low cost IBSC have not met the predictions of theoretical analysis. Existing implementations of the IBSC design using conventional Stranski-Krastanov (S-K) quantum dots (QDs) have resulted in a degradation in the solar cell device characteristics, which has been found to be caused by recapturing or trapping of excess carriers, low intermediate band material absorption, and increased recombination in the solar …

Theoretical Investigations Of The Structural, Dynamical, Electronic, Magnetic, And Thermoelectric Properties Of Corhysi (Y = Cr, Mn) Quaternary Heusler Alloys, Abdullah Hussain Hzzazi

Graduate Theses and Dissertations

Thermoelectric materials have potential properties for utilizing waste heat. The computations are used to estimate the electronic structure of CoRhYSi (Y = Cr, Mn) Quaternary Heusler alloys, as well as their elastic and magnetic characteristics. The full-potential linearized augmented plane wave is used in the calculations. The exchange-correlations are addressed using Perdew–Burke and Ernzerhof's generalized gradient approximation (GGA-PBE). With the exception of CoRhCrSi and CoRhMnSi, which are simple ferromagnets that are approximately half metallic in nature, electronic structure calculations demonstrate that these compounds have a gap in the minority states band and are obviously half-metallic ferromagnets. The magnetic moments of …

Structural And Electronic Properties Of Few-Layer Monochalcogenides, Brandon Joel Miller

Graduate Theses and Dissertations

This work discusses a new class of materials with novel properties that have only recently begun being studied. These materials are two-dimensional group IV-VI monochalcogenides, so named because they are formed from group IV (carbon group) and group VI (chalcogens) elements. These materials display several interesting physical properties such as ferroelasticity and ferroelectricity, and the contents within Chapters Two, Three, and Four concern a collaborative effort between theory and experiment between our group at the University of Arkansas and Dr. Kai Chang at the Max Planck Institute of Microstructure Physics in Halle, Germany in studying these properties. This thesis is …

Computational Modeling Of Black Phosphorus Terahertz Photoconductive Antennas Using Comsol Multiphysics With Experimental Comparison Against A Commercial Lt-Gaas Emitter, Jose Isaac Santos Batista

Graduate Theses and Dissertations

This thesis presents computational models of terahertz (THz) photoconductive antenna (PCA) emitter using COMSOL Multiphysics commercial package. A comparison of the computer simulated radiated THz signal against that of an experimentally measured signal of commercial reference LT-GaAs emitter is presented. The two-dimensional model (2D) aimed at calculating the photoconductivity of a black phosphorus (BP) PCA at two laser wavelengths of 780 nm and 1560 nm. The 2D model was applied to the BP PCA emitter and the LT-GaAs devices to compare their simulated performance in terms of the photocurrent and radiated THz signal pulse. The results showed better performance of …

Designing Cryogenic Strain Device For 2d Materials, Jake Carter

Mechanical Engineering Undergraduate Honors Theses

The Churchill lab working within the Physics Department at the University of Arkansas is working to create important quantum states including weak topological insulators (TIs) through the use of symmetry engineering and topological electronic states in two-dimensional (2D) crystals of WHM materials. Experimental results of these topological states have been obstructed due to the difficulty to perform controlled in situ strain. This project strives to create a mount to utilize a piezoelectric nanopositioner within cryostats achieving an in situ strain that creates the quantum states the lab is looking to observe. This report also examines the necessary equations to determine …

Mechanical Behavior Of Cyclo-18 On Nickel And Copper Substrates, Reagan Michael Kraft

Mechanical Engineering Undergraduate Honors Theses

Carbyne, an -hybridized allotrope of carbon, has been the subject of many studies recently due to its incredible mechanical properties and small size. More recently, another -hybridized allotrope known as cyclo-18, has gained interest. In this study, computational molecular dynamics will be used to determine the mechanical properties of cyclo-18. Peeling and shearing tests of the molecule will be conducted on nickel and copper, which are respectively active and less-active transition metals. Additionally, a carbyne chain of equal length will undergo the same tests on the copper substrate to compare the mechanical properties of the two. The results conclude that …

Memory Module Design For High-Temperature Applications In Sic Cmos Technology, Affan Abbasi

Graduate Theses and Dissertations

The wide bandgap (WBG) characteristics of SiC play a significant and disruptive role in the power electronics industry. The same characteristics make this material a viable choice for high-temperature electronics systems. Leveraging the high-temperature capability of SiC is crucial to automotive, space exploration, aerospace, deep well drilling, and gas turbines. A significant issue with the high-temperature operation is the exponential increase in leakage current. The lower intrinsic carrier concentration of SiC (10-9 cm-3) compared to Si (1010 cm-3) leads to lower leakage over temperature. Several researchers have demonstrated analog and digital circuits designed in SiC. However, a memory module is …

Development And Characterization Of Metal Contacts For Graded Composition Ingan Solar Cells, Reem E. Alhelais

Graduate Theses and Dissertations

There is an increasing demand for high-power electronic components and optoelectronic devices with low-loss and high efficiency. III-nitride semiconductor materials have demonstrated great potential for high-power, high-frequency, and high-temperature applications because of their remarkable and wide-ranging electronic and physical properties. These material systems, including alloys of AlN, GaN, and InN, are currently being explored for their potential to develop efficient photovoltaic cells. They can potentially achieve higher efficiency because of their very high direct wide band edge, absorption coefficients, and resistance to defects. The compositionally graded Group III-nitride alloy allows access to a large range of energies by varying the …

Interfacial Contact With Noble Metal - Noble Metal And Noble Metal - 2d Semiconductor Nanostructures Enhance Optical Activity, Ricardo Raphael Lopez Romo

Graduate Theses and Dissertations

Noble metal nanoparticles and two-dimensional (2D) transition metal dichalcogenide (TMD) crystals offer unique optical and electronic properties that include strong exciton binding, spin-orbital coupling, and localized surface plasmon resonance. Controlling these properties at high spatiotemporal resolution can support emerging optoelectronic coupling and enhanced optical features. Excitation dynamics of these optical properties on physicochemically bonded mono- and few-layer TMD crystals with metal nanocrystals and two overlapping spherical metal nanocrystals were examined by concurrently (i) DDA simulations and (ii) far-field optical transmission UV-vis spectroscopic measurements. Initially, a novel and scalable method to unsettle van der Waals bonds in bulk TMDs to prepare …

Studies Of Initial Growth Of Gan On Inn, Alaa Alnami

Graduate Theses and Dissertations

III-nitride materials have recently attracted much attention for applications in both the microelectronics and optoelectronics. For optoelectronic devices, III-nitride materials with tunable energy band gaps can be used as the active region of devices to enhance the absorption or emission. A such material is indium nitride (InN), which along with gallium nitride (GaN) and aluminum nitride (AlN) embody the very real promise of forming the basis of a broad spectrum, a high efficiency solar cell. One of the remaining complications in incorporating InN into a solar cell design is the effects of the high temperature growth of the GaN crystal …

Optical Response Analysis Of Thz Photoconductive Antenna Using Comsol Multiphysics, Jose Isaac Santos Batista

Electrical Engineering Undergraduate Honors Theses

A THz photoconductive antenna consists of antenna pads laid over a photoconductive substrate. These types of antennas are excited through the application of an optical pump (laser), which generates carriers inside the semiconductor. The acceleration and recombination of these carriers produce photocurrent that excites the antenna and generates THz pulse. This thesis focuses on analyzing the optical response of a photoconductive antenna, which consist of the interaction of the incident electric field of a laser pump with the radiating device. It develops the amplitude modulation process of a plane wave of light into a laser pump. It also takes into …

Predicting The Mechanical Properties Of Nanocomposites Reinforced With 1-D, 2-D And 3-D Nanomaterials, Scott Edward Muller

Graduate Theses and Dissertations

Materials with features at the nanoscale can provide unique mechanical properties and increased functionality when included as part of a nanocomposite. This dissertation utilizes computational methods at multiple scales, including molecular dynamics (MD) and density functional theory (DFT), and the coupled atomistic and discrete dislocation multiscale method (CADD), to predict the mechanical properties of nanocomposites possessing nanomaterials that are either 1-D (carbyne chains), 2-D (graphene sheets), or 3-D (Al/amorphous-Si core-shell nanorod).

The MD method is used to model Ni-graphene nanocomposites. The strength of a Ni-graphene nanocomposite is found to improve by increasing the gap between the graphene sheet and a …

Feedforward And Feedback Signals In The Olfactory System, Srimoy Chakraborty

Graduate Theses and Dissertations

The conglomeration of myriad activities in neural systems often results in prominent oscillations. The primary goal of the research presented in this thesis was to study effects of sensory stimulus on the olfactory system of rats, focusing on the olfactory bulb (OB) and the anterior piriform cortex (aPC). Extracellular electrophysiological measurements revealed distinct frequency bands of oscillations in OB and aPC. However, how these oscillatory fluctuations help the animal to process sensory input is not clearly understood. Here we show high frequency oscillations in olfactory bulb carry feedforward signals to anterior piriform cortex whereas feedback from the aPC is predominantly …

Characterization Of Hydride Vapor Phase Epitaxy Grown Gan Substrates For Future Iii-Nitride Growth, Alaa Ahmad Kawagy

Graduate Theses and Dissertations

The aim of this research is to investigate and characterize the quality of commercially obtained gallium nitride (GaN) on sapphire substrates that have been grown using hydride vapor phase epitaxy (HVPE). GaN substrates are the best choice for optoelectronic applications because of their physical and electrical properties. Even though HVPE GaN substrates are available at low-cost and create the opportunities for growth and production, these substrates suffer from large macro-scale defects on the surface of the substrate.

In this research, four GaN on sapphire substrates were investigated in order to characterize the surface defects and, subsequently, understand their influence on …

University Physics I: Classical Mechanics, Julio Gea-Banacloche

Open Educational Resources

This is a textbook for the first semester of University Physics for scientists and engineers. It covers classical mechanics, and a brief introduction to thermodynamics. The presentation and approach are similar to Mazur’s “The Principles and Practice of Physics,” in that conservation laws are introduced before forces, and one-dimensional systems thoroughly covered before moving to two dimensions. Although the course is “calculus based,” the book has been written with the understanding that many students may be taking calculus simultaneously as a corequisite, so the use of calculus is relatively sparse.

This revised version (Fall 2019) takes into account a number …