Engineering Physics Commons^™

Evolution Of Perturbations In Flow Field Mechanics, Samantha R. Bell, David Forliti, Nils Sedano, Kriss Vanderhyde

STAR Program Research Presentations

This project explores the stability analysis of a given flow field. Specifically, where the peak disturbance occurs in a flow as this is the disturbance that is most likely to occur. In rocket combustion, it is important to understand where the maximum disturbance occurs so that the mixing of fuel can be stabilized. The instabilities are the results of frequencies in the area surrounding the flow field. The linear stability governing equations are employed to better understand the disturbance. The governing equations for continuity and momentum in the x and y directions are used to form an equation for the …

Feedback Stabilization At Spear3, Daniel Kelley, Jeff Corbett

STAR Program Research Presentations

The SPEAR3 synchrotron lightsource at SLAC relies on a sophisticated radio frequency (RF) timing system to maintain current – electrons – in the storage ring. One problem SPEAR3 operators have dealt with is the thermal expansion of one of the cables supporting this RF timing system. As the cable expands and contracts with the diurnal rise and fall of the sun, the phase of the RF in the cable shifts. This shifting phase affects the timing accuracy of electron injections into the storage ring.

A common feedback control algorithm PID (Proportional Integral Derivative) has countless applications in engineering. PID feedback …

Designing A Cold Source To Be Integrated With The Existing Telescope Assembly Alignment Simulator, Rebecca L. Salvemini, Carey Baxter, Zaheer Ali, Greg Perryman, Robert Thompson, Daniel Nolan

STAR Program Research Presentations

The stratospheric observatory for infrared astronomy (SOFIA), is a modified Boeing 747-SP with a 2.5m telescope mounted inside. SOFIA flies at an altitude of 45,000 feet, above 99% of the water vapor in the atmosphere, allowing transmission of most infrared radiation. SOFIA has seven different science instruments (SI) that can be used to collect astronomical data, enabling scientists to look at many different wavelengths of infrared and visible radiation.

Experimenting With Polymer Blend Solar Cells And Active Layer Thickness, Ryan Blumenthal

Physics

Bulk heterojunction organic photovoltaics utilize the electrical characteristics of semi-conductive polymers. These solution processable materials are beneficial because of their low material cost, light weight, and simple fabrication requirements. Our devices employ multiple photoactive polymers, P3HT and PCPDTBT, to absorb photons over a wide spectral range. We optimized various device characteristics including thickness and thermal anneal usage to reach a power conversion efficiency of 3.0% in AM1.5 sunlight. Device performance degrades over time due to atmospheric water and oxygen, prompting us to investigate device packaging to extend cell lifetime for additional testing.

An Investigation Into Dual-Axis Solar Tracking, Daniel Spaizman

Physics

This senior project aims to determine a) if using a controlled photon-tracking system does produce greater voltage output than a fixed panel and b) by how much, if so. To do this, I built a dual-axis solar tracker using a small solar panel, some stepper motors, and an Arduino Uno. The majority of my time was spent familiarizing myself with the electrical components and fabricating the device. To test the performance of the panel, the leads of the solar panel were attached to the Arduino to record the output voltages. Two experiments were carried out to discover the answers to …

A Tunable Electromagnetic Band-Gap Microstrip Filter, Greg A. Lancaster

Master's Theses

In high frequency design, harmonic suppression is a persistent struggle. Non-linear devices such as switches and amplifiers produce unwanted harmonics which may interfere with other frequency bands. Filtering is a widely accepted solution, however there are various shortcomings involved. Suppressing multiple harmonics, if desired, with traditional lumped element and distributed component band-stop filters requires using multiple filters. These topologies are not easily made tunable either. A new filter topology is investigated called Electromagnetic Band-Gap (EBG) structures.

EBG structures have recently gained the interest of microwave designers due to their periodic nature which prohibits the propagation of certain frequency bands. EBG …

Analyzing Wind Turbine Controller Effects On Structure Stress, Leo Groner, Susan Frost

STAR Program Research Presentations

Wind turbines generate electric power from clean renewable sources. They must be robust and reliable. Utility-scale turbines are designed to produce power within a set of wind speed parameters. When winds change, wind turbine blade pitch is used to protect the turbine from over speed damage.

Advanced control algorithms can increase power by extending the performance envelope or they can extend lifetime by reducing stress. A FAST simulation written in MATLAB / Simulink is used to simulate the dynamics of the integrated aerodynamic, mechanical and control subsystems of the turbine. Resonance modes may lead to large amplitude displacements and damage. …

Electronics Development For The Cherenkov Telescope Array, Margaret C. Murphy, Justin Vandenbrouke

STAR Program Research Presentations

Gamma-ray astronomy promises to elucidate the highest-energy particle accelerators in the Universe, and could play a key role in identifying the nature of dark matter. The Cherenkov Telescope Array (CTA), currently in the research and development stage, will study and capture gamma-rays with an order of magnitude grater sensitivity than the instruments already in place. Each telescope in the array will be equipped with dozens of camera modules each containing four TeV Array Readout with GSa/s sampling and Event Trigger (TARGET) chips. TARGET 4 has many internal settings, several of which were tested and analyzed to achieve an optimal operating …

The Double Pendulum: Construction And Exploration, Benjamin J. Knudson

Physics

The exploration of a nonlinear mechanical system, the Double Pendulum, a physical pendulum on the end of a physical pendulum, using analytic and experimental approaches. Also included discussion of the design and construction of the Double Pendulum apparatus to work with Vernier LabPro and LoggerPro. The apparatus outputs live data of the angles to a LoggerPro which collects and produces time evolution graphs as well as a corresponding animation lending itself to comparison with theoretical models. Normal mode frequencies are found both analytically and experimentally for the the general (real) double pendulum. Examples of both simple (periodic) and complex (chaotic) …

Development Of A Pyrotechnic Shock Simulation Apparatus For Spacecraft Applications, Joseph Binder, Matthew Mccarty, Chris Rasmussen

Aerospace Engineering

This report details the research, design, construction, and testing of a pyrotechnic shock simulation apparatus for spacecraft applications. The apparatus was developed to be used in the Space Environments Lab at California Polytechnic State University. It will be used for testing spacecraft components with dimensions up to 24”x12”x12” as well as CubeSats. Additionally, it may be used as an instructional or demonstrational tool in the Aerospace Department’s space environments course. The apparatus functions by way of mechanical impact of an approximately 20 lb stainless steel swinging hammer. Tests were performed to verify the simulator’s functionality. Suggestions for improvement and further …

Inductive Metal Identification, Paul Maggi

Electrical Engineering

This project focuses on creating a device to differentiate between various types of metals via magnetic induction. Magnetic induction is used because it is both non-optical and non-contact. It achieves this by generating a varying magnetic field, which induces eddy currents in the metal. These eddy currents produce small disturbances in the surrounding magnetic field, which can be sensed with Hall Effect Sensors (HES). The primary challenge in this project was generating a sufficiently strong magnetic field to detectable disturbances. In order to achieve better results, a stronger magnetic field must be used as well as more sensitive Hall Effect …

Analysis Of Focal-Plane Measurements For Veritas Telescopes, William Hemmo Schuur

Physics

In this experiment we measured the Point Spread Function (PSF) of the telescope at different image locations using a python GUI and servo motors to automate a screen along the focal axis of the telescope. Our results show that the telescope T4 has a well-defined image distance at each elevation, but this distance shifts as the telescope is lowered. Additionally, off-axis telescope orientations are degraded by aberrations and at low elevation possibly some structural warping of the mirror. The VERITAS Telescopes are located in Southern Arizona at the Fred Lawrence Whipple Observatory.

Assessing Laser Lifetime Test Performance, Joe Weichman, Hamid Hemmati, Malcolm Wright

STAR Program Research Presentations

Assessing expected component lifetime is necessary in developing instruments for future space-flight projects to ensure long term operation in the challenging environment. Although semiconductor diode lasers have widespread use in terrestrial applications, their use in space is still an emerging technology that requires on-going testing to demonstrate their capability. The project called for re-establishing the test setup for assessing lifetime performance of 20 continuously running 200mW 830 nm diode lasers. These lasers underwent previous testing based on parameters for NuSTAR’s laser metrology system, and met the six month lifetime project requirements under nominal operating conditions. Laser testing is currently underway …

Ferrofluids, James Patt

Physics

Ferrofluids are truly fascinating. Technologically savvy artists have been able to capture the human imagination with little but a judicious application of a magnetic field. The substance seems to defy gravity, flowing and shaping itself seemingly like magic (see Figure 1). The true magic, however, is the vast range of properties that this intrinsically simple substance can exhibit. It can vary its viscosity given the strength of the magnetic field. It can draw heat away from an over worked mechanical component. It can even split a beam of light in two. It’s hard to imagine what kind of strange and …

Construction And Enhancement Of Stereo Vacuum Tube Amplifier With Precision Machined Enclosure, Nikolaus (Nik) Glazar

Physics

The purpose of this project was to build a high fidelity tube amplifier from a kit, and machine a beautiful enclosure to house the electronics. Improvements were made to the circuit, and the amplifier was then tested for audio performance.

Achieving Energy Efficiency In Buildings In Developing Countries, Pavel Ponomarev

Physics

No abstract provided.