Open Access. Powered by Scholars. Published by Universities.®

Condensed Matter Physics Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 14 of 14

Full-Text Articles in Condensed Matter Physics

Reconfigurable Large-Area Magnetic Vortex Circulation Patterns, Robert Streubel, Florian Kronast, Ulrich K. Rößler, Oliver G. Schmidt, Denys Makarov Sep 2015

Reconfigurable Large-Area Magnetic Vortex Circulation Patterns, Robert Streubel, Florian Kronast, Ulrich K. Rößler, Oliver G. Schmidt, Denys Makarov

Robert Streubel Papers

Magnetic vortices in nanodots own a switchable circulation sense. These nontrivial magnetization configurations can be arranged into extended and interacting patterns. We have experimentally created large arrays of magnetically reconfigurable vortex patterns in nonplanar honeycomb lattices using particle lithography. Optimizing height asymmetry of the vertices and applying an in-plane magnetic field provide means to switch between homocircular and staggered vortex patterns with a potentially high impact on magnonics and spintronics relying on chiral noncollinear spin textures. To this end, exchange coupling of extended vortex lattices with an out-of-plane magnetized layer allows one to realize artificial skyrmionic core textures with controllable …


Magnetization Dynamics Of Imprinted Non-Collinear Spin Textures, Robert Streubel, Peter Fischer, Martin Kopte, Oliver G. Schmidt, Denys Makarov Sep 2015

Magnetization Dynamics Of Imprinted Non-Collinear Spin Textures, Robert Streubel, Peter Fischer, Martin Kopte, Oliver G. Schmidt, Denys Makarov

Robert Streubel Papers

We study the magnetization dynamics of non-collinear spin textures realized via imprint of the magnetic vortex state in soft permalloy into magnetically hard out-of-plane magnetized Co/Pd nanopatterned heterostructures. Tuning the interlayer exchange coupling between soft- and hard-magnetic subsystems provides means to tailor the magnetic state in the Co/Pd stack from being vortex- to donut-like with different core sizes. While the imprinted vortex spin texture leads to the dynamics similar to the one observed for vortices in permalloy disks, the donut-like state causes the appearance of two gyrofrequencies characteristic of the early and later stages of the magnetization dynamics. The dynamics …


Superconducting Antenna Concept For Gravitational Waves, Armen Gulian, J Foreman, Vahan Nikoghosyan, Shmuel Nussinov, Louis Sica, Jeff Tollaksen Jul 2015

Superconducting Antenna Concept For Gravitational Waves, Armen Gulian, J Foreman, Vahan Nikoghosyan, Shmuel Nussinov, Louis Sica, Jeff Tollaksen

Mathematics, Physics, and Computer Science Faculty Articles and Research

The most advanced contemporary efforts and concepts for registering gravitational waves are focused on measuring tiny deviations in large arm (kilometers in case of LIGO and thousands of kilometers in case of LISA) interferometers via photons. In this report we discuss a concept for the detection of gravitational waves using an antenna comprised of superconducting electrons (Cooper pairs) moving in an ionic lattice. The major challenge in this approach is that the tidal action of the gravitational waves is extremely weak compared with electromagnetic forces. Any motion caused by gravitational waves, which violates charge neutrality, will be impeded by Coulomb …


Engineering Room-Temperature Superconductors Via Ab-Initio Calculations, Mamikon Gulian, Gurgen Melkonyan, Armen Gulian Jul 2015

Engineering Room-Temperature Superconductors Via Ab-Initio Calculations, Mamikon Gulian, Gurgen Melkonyan, Armen Gulian

Mathematics, Physics, and Computer Science Faculty Articles and Research

The BCS, or bosonic model of superconductivity, as Little and Ginzburg have first argued, can bring in superconductivity at room temperatures in the case of high-enough frequency of bosonic mode. It was further elucidated by Kirzhnits et al., that the condition for existence of high-temperature superconductivity is closely related to negative values of the real part of the dielectric function at finite values of the reciprocal lattice vectors. In view of these findings, the task is to calculate the dielectric function for real materials. Then the poles of this function will indicate the existence of bosonic excitations which can …


Current-Biased Transition-Edge Sensors Based On Re-Entrant Superconductors, Armen Gulian, Vahan Nikoghosyan, Jeff Tollaksen, V. Vardanyan, A. Kuzanyan Jul 2015

Current-Biased Transition-Edge Sensors Based On Re-Entrant Superconductors, Armen Gulian, Vahan Nikoghosyan, Jeff Tollaksen, V. Vardanyan, A. Kuzanyan

Mathematics, Physics, and Computer Science Faculty Articles and Research

Transition-edge sensors are widely recognized as one of the most sensitive tools for the photon and particles detection in many areas, from astrophysics to quantum computing. Their application became practical after understanding that rather than being biased in a constant current mode, they should be biased in a constant voltage mode. Despite the methods of voltage biasing of these sensors are well developed since then, generally the current biasing is more convenient for superconducting circuits. Thus transition-edge sensors designed inherently to operate in the current-biased mode are desirable. We developed a design for such detectors based on re-entrant superconductivity. In …


Prospective Solid-State Photonic Cryocooler Based On The “Phonon-Deficit Effect”, Gurgen Melkonyan, Armen Gulian Jul 2015

Prospective Solid-State Photonic Cryocooler Based On The “Phonon-Deficit Effect”, Gurgen Melkonyan, Armen Gulian

Mathematics, Physics, and Computer Science Faculty Articles and Research

In this design microwave photons are propagating in a sapphire rod, and are being absorbed by a superconductor deposited on the surface of the rod. The frequency of the radiation is tuned to be less than the energy gap in the superconductor, so that the pair breaking is not taking place. This photon pumping redistributes the electron-hole quasiparticles: their distribution function is non-equilibrium, and the “phonon-deficit effect” takes place. There is a dielectric material deposited on top of superconductor, which serves asthe “cold finger” of the cooler. Its “acoustical density” is supposed to be smaller than that of the superconducting …


Retrieving Spin Textures On Curved Magnetic Thin Films With Full-Field Soft X-Ray Microscopies, Robert Streubel, Florian Kronast, Peter Fischer, Dula Parkinson, Oliver G. Schmidt, Denys Makarov Jul 2015

Retrieving Spin Textures On Curved Magnetic Thin Films With Full-Field Soft X-Ray Microscopies, Robert Streubel, Florian Kronast, Peter Fischer, Dula Parkinson, Oliver G. Schmidt, Denys Makarov

Robert Streubel Papers

X-ray tomography is a well-established technique to characterize 3D structures in material sciences and biology; its magnetic analogue - magnetic X-ray tomography - is yet to be developed. Here we demonstrate the visualization and reconstruction of magnetic domain structures in a 3D curved magnetic thin films with tubular shape by means of full-field soft X-ray microscopies. The 3D arrangement of the magnetization is retrieved from a set of 2D projections by analysing the evolution of the magnetic contrast with varying projection angle. Using reconstruction algorithms to analyse the angular evolution of 2D projections provides quantitative information about domain patterns and …


Thermoelectric Properties Of Nano-Meso-Micro Β-Mno2 Powders As A Function Of Electrical Resistance: Experiment And Theory, Morgan Hedden May 2015

Thermoelectric Properties Of Nano-Meso-Micro Β-Mno2 Powders As A Function Of Electrical Resistance: Experiment And Theory, Morgan Hedden

Senior Honors Projects, 2010-2019

In this work, the thermoelectric properties of Beta-MnO2 powders as a function of electrical resistance are measured and compared to theoretical models. The discovery of a giant Seebeck coefficient by Song et al. in these powders rejuvenated interest in understanding the physical mechanism behind it. A simple pestle and mortar method was used to modify the MnO2 powder sizes. We and the largest S coefficient, power factor, and thermal conductivity values were found to be S=-316 uV/K, (sigma)S2 =5.8x10-7 W/mK2 and k=0.2096 W/(mK), all observed at a particle electrical resistance of R=9.8 Ohms. From these …


Novel Physical Properties Of Non-Trivial Magnetic Materials: Cr1/3nbs2, Mnsi And Fe3gete2, Jieyu Yi May 2015

Novel Physical Properties Of Non-Trivial Magnetic Materials: Cr1/3nbs2, Mnsi And Fe3gete2, Jieyu Yi

Doctoral Dissertations

Helimagnets and quasi-two-dimensional layered materials have attracted much recent interest due to their rich physical properties and potential for spintronics applications. In this dissertation, the helimagnets Cr1/3NbS2 [chromium one-third niobium disulfide] and thin-film MnSi [manganese silicide] as well as the layered magnetic material Fe3GeTe2 [iron three germanium ditelluride] were extensively and carefully studied. Cr1/3NbS2 was previously reported to be helimagnet with a transition temperature of approximately 120 K. Cr1/3NbS2 has a layered structure with Cr3+ ions intercalating between NbS­2 sheets, and is easily cleaved. Using in-situ …


Magnetic Force Microscopy Study Of Zr2co11-Based Nanocrystalline Materials: Effect Of Mo Addition, Lanping Yue, Yunlong Jin, Wenyong Zhang, David J. Sellmyer Jan 2015

Magnetic Force Microscopy Study Of Zr2co11-Based Nanocrystalline Materials: Effect Of Mo Addition, Lanping Yue, Yunlong Jin, Wenyong Zhang, David J. Sellmyer

Nebraska Center for Materials and Nanoscience: Faculty Publications

The addition of Molybdenum was used to modify the nanostructure and enhance coercivity of rare-earth-free Zr2Co11-based nanocrystalline permanent magnets. The effect of Mo addition on magnetic domain structures of melt spun nanocrystalline Zr16Co84−xMox (𝑥 = 0, 0.5, 1, 1.5, and 2.0) ribbons has been investigated. It was found that magnetic properties and local domain structures are strongly influenced by Mo doping. The coercivity of the samples increases with the increase in Mo content (𝑥 ≤ 1.5). The maximum energy product (𝐵𝐻)max increases with increasing 𝑥 from 0.5 MGOe for 𝑥 …


Electrostatic Charge On Flying Hummingbirds And Its Potential Role In Pollination, Marc Badger, Victor Manuel Ortega-Jimenez, Lisa Von Ribenau, Ashley Smiley, Robert Dudley, Alexei Gruverman , Editor Jan 2015

Electrostatic Charge On Flying Hummingbirds And Its Potential Role In Pollination, Marc Badger, Victor Manuel Ortega-Jimenez, Lisa Von Ribenau, Ashley Smiley, Robert Dudley, Alexei Gruverman , Editor

Alexei Gruverman Publications

Electrostatic phenomena are known to enhance both wind- and insect-mediated pollination, but have not yet been described for nectar-feeding vertebrates. Here we demonstrate that wild Anna's Hummingbirds (Calypte anna) can carry positive charges up to 800 pC while in flight (mean ± s.d.: 66 ± 129 pC). Triboelectric charging obtained by rubbing an isolated hummingbird wing against various plant structures generated charges up to 700 pC. A metal hummingbird model charged to 400 pC induced bending of floral stamens in four plants (Nicotiana, Hemerocallis, Penstemon, and Aloe spp.), and also attracted falling Lycopodium spores at distances of < 2 mm. Electrostatic forces may therefore influence pollen transfer onto nectar-feeding birds.


Magnetic Chiral Spin Textures By Imprinting, Robert Streubel, F. Kronast, U. Rössler, O. G. Schmidt, P. Fischer, D. Makarov Jan 2015

Magnetic Chiral Spin Textures By Imprinting, Robert Streubel, F. Kronast, U. Rössler, O. G. Schmidt, P. Fischer, D. Makarov

Robert Streubel Papers

The unique properties of non-trivial topological states, e.g. magnetic skyrmions [1] may path the way towards novel spintronic devices [2]. However, these spin textures have only been observed in special classes of materials possessing non-centrosymmetric crystal structure [1,3-6] and at low temperatures, which limits their application potential. We offer an alternate route to design synthetic magnetic heterostructures that resemble swirls, vortices or skyrmions with distinct topological charge densities at room temperature. By vertically stacking two magnetic nanopatterns with in-and out-of-plane magnetization and tailoring the interlayer exchange coupling, non-collinear spin textures with tunable topological charge can be imprinted (Fig. 1a).


Manipulating Topological States By Imprinting Non-Collinear Spin Textures, Robert Streubel, Luyang Han, Mi Young Im, Florian Kronast, Ulrich K. Rößler, Florin Radu, Radu Abrudan, Gungun Lin, Oliver G. Schmidt, Peter Fischer, Denys Makarov Jan 2015

Manipulating Topological States By Imprinting Non-Collinear Spin Textures, Robert Streubel, Luyang Han, Mi Young Im, Florian Kronast, Ulrich K. Rößler, Florin Radu, Radu Abrudan, Gungun Lin, Oliver G. Schmidt, Peter Fischer, Denys Makarov

Robert Streubel Papers

Topological magnetic states, such as chiral skyrmions, are of great scientific interest and show huge potential for novel spintronics applications, provided their topological charges can be fully controlled. So far skyrmionic textures have been observed in noncentrosymmetric crystalline materials with low symmetry and at low temperatures. We propose theoretically and demonstrate experimentally the design of spin textures with topological charge densities that can be tailored at ambient temperatures. Tuning the interlayer coupling in vertically stacked nanopatterned magnetic heterostructures, such as a model system of a Co/Pd multilayer coupled to Permalloy, the in-plane non-collinear spin texture of one layer can be …


Magnetic Soft X-Ray Tomography Of Magnetic Swiss Roll Architectures, Robert Streubel, F. Kronast, P. Fischer, O. G. Schmidt, D. Makarov Jan 2015

Magnetic Soft X-Ray Tomography Of Magnetic Swiss Roll Architectures, Robert Streubel, F. Kronast, P. Fischer, O. G. Schmidt, D. Makarov

Robert Streubel Papers

A further increase in performance of state-of-the-art spin-electronics can be achieved by either miniaturizing its functional components or harnessing the third dimension. The first route, however, faces physical limitations as properties of nanostructures and their response to external stimuli can drastically change in reduced dimensions. An alternative way is to go from planar 2D structures to 3D architectures [1]. Such 3D functional elements can be obtained for example by rolling up initially planar strained thin films into Swiss roll like objects with multiple windings (Fig. 1a). A major advantage of this technology platform is the possibility to fabricate compact multifunctional …