Atomic, Molecular and Optical Physics Commons^™

Synthesizing Viscoelasticity: Living Polymers, Micro-Macro Relations, And Paths For Resolution, Adam M. Hasler

Graduate Masters Theses

This thesis investigates the relationship between macroscopic rheological signals and underlying microscopic dynamics in complex fluids, specifically focusing on ”living polymers” within the cetyltrimethylammonium bromide (CTAB) and sodium salicylate (NaSal) surfactant system. The research addresses the inverse parameterization problem, demonstrating how bulk measurements like zero-shear viscosity can mask fundamentally different physical topologies, such as purely cylindrical, reptating micelles versus highly branched networks. Through the successful synthesis of viscoelastically ”degenerate” samples, the study utilizes an array of characterization techniques including frequency sweeps, Large Amplitude Oscillatory Shear (LAOS) to resolve these unique underlying states. Furthermore, the work explores further avenues of study …

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe_0.925Ti_0.075O₃ (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

2d Cuo/Rgo Nanocomposite: A Novel Architecture For Enhanced Cr(Vi) Photo-Reduction, Islam Gomaa, Nasser M. Hosny, Medhat A. Ibrahim

Nanotechnology Research Centre

he urgent need for efficient detoxification of carcinogenic hexavalent chromium (Cr(VI)) in aquatic environments has driven the development of advanced photocatalytic materials. This study presents the synthesis of 2D CuO/reduced graphene oxide (rGO) nanocomposite via probe sonication, designed to synergistically enhance the photocatalytic reduction of Cr(VI) to less toxic Cr(III). The nanocomposite was meticulously characterized using XRD, HRTEM, FESEM, XPS, and UV-Vis diffuse reflectance spectroscopy. Structural analysis confirmed the formation of CuO nanosheets (average size: 396 nm, thickness: 6 nm) integrated with rGO, where the rGO acted as an electron acceptor, mitigating charge recombination. XPS revealed Cu²⁺ in CuO and …

Shrinkage Study In Photopolymerisable Hybrid Sol-Gel Through Holographic Patterning, Jamshed Aftab, Izabela Naydenova, Tatsiana Mikulchyk

Articles

Photopolymerisation induced shrinkage of holographic materials is one of the main factors which needs to be considered for designing holographic optical elements (HOEs) with high accuracy in light redirection with maximum efficiency. This work studies the shrinkage in photopolymerisable hybrid sol-gel (PHSG) by examining the properties of volume transmission gratings recorded in PHSG layers. It explores both the dependence of shrinkage on the holographic grating parameters (thickness, spatial frequency, slant angle) and the effect of material aging. By using the fringe-plane rotation model, shrinkage is found to have the maximum value of 1.37 % at 765 lines/mm (19.36° slant angle) …

Computational Analysis Of Proton Conductivity Factors In Grotthuss-Style Mechanisms, Brock Dyer

Physics and Astronomy Honors Papers

The mechanism and fundamental molecular properties involved in proton conduction are discussed. Four calculable properties are presented: the proton affinity, binding energy (between protonated and neutral forms), intramolecular tautomerization barrier, and proton hopping barrier. An overview of the computational methods used in this thesis, including an introduction to the many-body Schrödinger equation and Density Functional Theory, as well as a look at Plane-Wave Density Functional Theory and Gaussian-Type Orbital Density Functional Theory are presented. 4,5-dimethyl-[1,2,3]-triazole is used as a model system, with 10 variations being generated with varying amounts and positions of fluorine substitution on the methyl groups. Preliminary calculations …

Explorations Of Dna-Single-Walled Carbon Nanotube Interactions To Develop Multiplexed Molecularly Specific Biosensors For Inflammation, Amelia K. Ryan

Dissertations and Theses

Inflammatory cytokines such as interleukin-6 (IL-6) and interleukin-12 (IL-12) are central regulators of immune signaling and key biomarkers of disease, yet existing assays for their detection remain slow, invasive, and lack multiplexing ability. This dissertation advances the development of single-walled carbon nanotube (SWCNT) optical nanosensors capable of real-time, multiplexed, and molecularly specific cytokine detection through innovative use of single-stranded DNA (ssDNA) interfaces.

First, an IL-6-specific DNA aptamer was employed as both a dispersing agent and recognition probe for SWCNT fluorescence sensing. Sequence modifications, including anchor domains, truncations, and thermally induced refolding, were systematically tested to optimize sensitivity and selectivity. The …

Structural, Electronic And Magnetic Properties Of Vanadium Doped Transition Metal Dichalcogenides (Tmds), Qudsia Ashraf

Dissertations, Theses, and Capstone Projects

Magnetic semiconductors are a prerequisite for spintronic devices but their ferromagnetism disappears at room-temperature hindering application in room temperature electronic devices. Enormous research has been conducted on the room-temperature ferromagnetic order in monolayer form of bulk van der Waals materials but the few layer system has not been extensively explored.

Doping is an effective approach to modulate the structural, electronic and magnetic properties of two-dimensional (2D) Transition metal dichalcogenides (TMDs) and expand their application. The effect of vanadium dopant on structural, electronic and magnetic properties of Tungsten Diselenide (WSe₂) was studied by X-ray Photoelectron Spectroscopy (XPS), Atomic Force …

Group Iv Topological Quantum Alloy And The Role Of Short-Range Order: The Case Of Ge-Rich Ge1–XPbX, Yunfan Liang, Shunda Chen, Xiaochen Jin, Damien West, Shui-Qing Yu, Tianshu Li, Shengbai Zhang

Electrical Engineering and Computer Science Faculty Publications and Presentations

Despite the explosion of interest in topological materials over the last decades, their applications remain limited due to challenges in growth and incorporation with today’s microelectronics. As a potential bridge to close this gap, we investigate the group-IV alloy Ge_1–xPb_x, in the Ge-rich condition using density functional theory and show that relatively low concentrations of Pb (~9.4%) can lead to a topological phase transition. Furthermore, the calculation of the Z₂ invariant for both the random alloy and the alloy with short-range order (SRO) indicate that the topological phase of the material can be directly modified …

Compton Scattering Of Mammographic Soft X-Ray Beams By Alkali And Transition Metal Salt Filters Produce X-Ray Interference Zones That May Have Treatment Potential For Localized Cancer Lesions, Subhendra N. Sarkar, Eric Lobel, Sabina Rakhmatova, Derbie Desir, Somdat Kissoon, Daler Djuraev, Katie Tam

Publications and Research

In breast x-ray imaging scattered radiation adds 50% of harmful radiation dose from anisotropic Compton scattering mechanism. We have been working with double layered inorganic salt materials that can induce Compton scattering to the incident mammographic x ray beams (in 20-30 kVp range) with adequate isotropy (angular control). Typically metal nitrates and alkali halide salt layers are shown here to cause low energy radiation interference zones with high and low photon intensities and local flux heterogeneity in terms of flux covariance. Spatial variation of low energy photon flux creates concentrated and sparse radiation zones that may be used to induce …

Photophysical And Photochemical Processes In Small Molecules And Materials For Solar Energy Conversion, Ethan Lambert

Honors Theses

The work covered in this thesis all falls under the theme of photophysical processes after light and matter interact. Those of primary interest are Raman scattering induced vibrations and excited state dynamics probed by transient absorption spectroscopy. Small molecules are studied with Raman spectroscopy and computational chemistry. These studies unearth the shifts in vibrational frequency as a function of charge transfer or receipt and how a quantitative assay of natural orbital populations and delocalization can offer both the nature and magnitude of this charge transfer. Further, a method is presented that builds upon previous work within the academic family tree; …

Synthesis Of A Novel Terbium(Iii) Complex For Application In Metal Nanoparticle Surface Modification, Lauralee E. Hurst, Davon Ferrara, Justin Stace

Science University Research Symposium (SURS)

Lanthanide ions, such as terbium(III), exhibit bright luminescence when bound to organic ligands which strongly absorb light. This property has been used in creating chemical sensors or luminescent tags for microscopy. Complexes centered with terbium(III) exhibit a yellow-green luminescence upon excitation by shortwave ultraviolet light. In this work, a bifunctional ligand, 4-mercaptobenzoic acid (4mba), was chosen to selectively coordinate terbium(III) to the oxygens of the acid functional group, leaving the thiol group available for another compound. Thiol groups are effectively used in surface coordination to noble metal nanoparticles (NP). In efforts to create a novel 4mba-terbium(III)-NP system, a one pot …

Using Superatomic Clusters And Charge Transfer Ligands To Control Electronic Characteristics Of Phosphorene Nanoribbons And Phosphorene Monolayer, Ryan Lambert

Theses and Dissertations

Phosphorene is a two-dimensional electron poor p-type semiconductor with high carrier mobility and great promise for applications in electronics and optoelectronics. As the main theme in this dissertation, the following work represents different investigations of various electronic properties associated with phosphorene. Most notable are the findings on charge transfer doping with metal-chalcogenide superatoms which displays novel control of the two most important properties of a semiconductor – the band gap energy and the nature of carriers. By tuning the width of the gap and p-/n-type character of conduction, we gain control over a material’s capacity to play a certain role …

Exploration And Synthesis Of Half-Heusler And Disordered Ternary Intermetallic Single Crystals, Md Fahel Bin Noor

Graduate Theses/Dissertations

Due to their distinct physical and chemical characteristics, half-Heusler compounds are intermetallic materials that have undergone substantial research. The general formula for these compounds is XYZ, where X and Y are transition metals and Z is a p-block element. Thermoelectricity is among the half-Heusler compounds' most exciting potential uses, but additional possible applications include spintronics, magnetic refrigeration, and superconductivity, among others. Recently, half-Heuslers (and Heuslers) have emerged as candidates for catalysts for hydrogenation. The CoNbSn half-Heusler compound, as well as another unique intermetallic ternary compound, the disordered Mn_4-xCr_xAl₁₁, were successfully grown as single crystals …

Combining Freestanding Ferroelectric Perovskite Oxides With Two-Dimensional Semiconductors For High Performance Transistors, Sergio Puebla, Thomas Pucher, Victor Rouco, Gabriel Sanchez-Santolino, Yong Xie, Victor Zamora, Fabian A. Cuellar, Federico J. Mompean, Carlos Leon, Carlos O. Island, Mar Garcia-Hernandez, Jacobo Santamaria, Carmen Munuera, Andres Castellanos-Gomez

Physics & Astronomy Faculty Research

We demonstrate the fabrication of field-effect transistors based on single-layer MoS2 and a thin layer of BaTiO3 (BTO) dielectric, isolated from its parent epitaxial template substrate. Thin BTO provides an ultrahigh-κ gate dielectric effectively screening Coulomb scattering centers. These devices show mobilities substantially larger than those obtained with standard SiO2 dielectrics and comparable with values obtained with hexagonal boron nitride, a dielectric employed for fabrication of high-performance two-dimensional (2D) based devices. Moreover, the ferroelectric character of BTO induces a robust hysteresis of the current vs gate voltage characteristics, attributed to its polarization switching. This hysteresis is strongly suppressed when the …

Atomistic Simulation Of Na+ And Cl- Ions Binding Mechanisms To Tobermorite 14Å As A Model For Alkali Activated Cements, Ahmed Abdelkawy

Theses and Dissertations

The production of ordinary Portland cement (OPC) is responsible for ~8% of all man-made CO2 emissions. Unfortunately, due to the continuous increase in the number of construction projects, and since virtually all projects depend on hardened cement from the hydration of OPC as the main binding material, the production of OPC is not expected to decrease. Alkali-activated cement produced from the alkaline activation of byproducts of industries, such as iron and coal industries, or processed clays represents a potential substitute for OPC. However, the interaction of the reaction products of AAC with corrosive ions from the environment, such as Cl-, …

Using Powder Diffraction To Give Insight Into Structures Of Ir2(Diisocyanomenthane)4x2 [Dimen] (X = Cl; Pf6; Bph4), Mairead Brownell

Scripps Senior Theses

Ir2(dimen)42+ (dimen = 1,8-diisocyanomenthane) has been studied extensively as model compound to better understand catalysis of photochemical reactions. Although Ir2(dimen)42+ has been used primarily to observe the photophysical changes of metal-metal transitions, it gives great insight into the transitions that allow other d8-d8 metal complexes to undergo photochemical processes and generate hydrogen gas. The large visible range by which Ir2(dimen)42+ (1) can be electronically excited in solution is indicative of its two solution phase ground states, which interestingly have been hypothesized to resemble two unique packing structures observed in the powder state. In this study, the powder diffraction patterns of …

Theoretical Investigation On Optical Properties Of 2d Materials And Mechanical Properties Of Polymer Composites At Molecular Level, Geeta Sachdeva

Dissertations, Master's Theses and Master's Reports

The field of two-dimensional (2D) layered materials provides a new platform for studying diverse physical phenomena that are scientifically interesting and relevant for technological applications. Theoretical predictions from atomically resolved computational simulations of 2D materials play a pivotal role in designing and advancing these developments. The focus of this thesis is 2D materials especially graphene and BN studied using density functional theory (DFT) and molecular dynamics (MD) simulations. In the first half of the thesis, the electronic structure and optical properties are discussed for graphene, antimonene, and borophene. It is found that the absorbance in (atomically flat) multilayer antimonene (group …

Charge Transfer Mediated Triplet Excited State Formation In Donor-Acceptor-Donor Bodipy: Application For Recording Of Holographic Structures In Photopolymerizable Glass, Tatsiana Mikulchyk, Safakath Karuthedath, Catherine S.P. De Castro, Andrey A. Buglak, Aimee Sheehan, Aaron Wieder, FréDéRic Laquai, Izabela Naydenova, Mikhail Filatov

Articles

Donor–acceptor–donor BODIPY triads bearing anthracene or pyrene as electron donating subunits were prepared through a stepwise synthesis. Photoinduced electron transfer and formation of long-lived triplet excited states via spin–orbit charge transfer intersystem crossing (SOCT-ISC) was studied by steady-state and ultrafast pump-probe spectroscopy and further supported by DFT computations. New BODIPYs were found to form triplet states and sensitize singlet oxygen in both polar and non-polar solvents which is unusual for photosensitizers operating via SOCT-ISC. BODIPY-anthracene triad (ABA) was used as a photosensitizer component in a photopolymerizable glass that was prepared by a four-step sol–gel process. ABA in combination with N …

Characterization Of Nanoparticles Using Inductively-Coupled Plasma Mass Spectrometry, Jabez D. Campbell

Graduate Theses/Dissertations

Nanomaterials are a relatively new class of materials that have many applications which span a wide host of fields from medical products to consumer products. The possible compositions and forms of nanomaterials are just as varied as the applications. Therefore, a versatile characterization method is needed for researchers and regulators alike to ensure nanomaterials are properly used. Single Particle Inductively Coupled Plasma Mass Spectrometry (SP-ICP-MS) is a functional method that could fill the characterization need in the nanomaterial research field. Using data from both SP-ICP-MS tests and data from literature established characterization methods, the viability of making SP-ICP-MS the standard …

Interactions Of Organic Fluorophores With Plasmonic Surface Lattice Resonances, Robert J. Collison

Dissertations, Theses, and Capstone Projects

It is common knowledge that metals, alloys and pure elements alike, are lustrous and reflective, the more so when a metal surface is flat, polished, and free from oxidation and surface fouling. However, some metals reflect visible light, in the 380 nm to 740 nm range of wavelengths, much more strongly than others. In particular, some metals reflect wavelengths in certain portions of the ultraviolet (UV), visible, and near-infrared (NIR) regime, let us say 200 nm to 2000 nm, while absorbing light strongly in other segments of this range. There are several factors that account for this difference between various …

Treated Hfo2 Based Rram Devices With Ru, Tan, Tin As Top Electrode For In-Memory Computing Hardware, Yuvraj Dineshkumar Patel

Theses

The scalability and power efficiency of the conventional CMOS technology is steadily coming to a halt due to increasing problems and challenges in fabrication technology. Many non-volatile memory devices have emerged recently to meet the scaling challenges. Memory devices such as RRAMs or ReRAM (Resistive Random-Access Memory) have proved to be a promising candidate for analog in memory computing applications related to inference and learning in artificial intelligence. A RRAM cell has a MIM (Metal insulator metal) structure that exhibits reversible resistive switching on application of positive or negative voltage. But detailed studies on the power consumption, repeatability and retention …

Adsorption And Reconfiguration Of Amphiphiles At Silica-Water Interfaces: Role Of Electrostatic Interactions, Van Der Waals Forces And Hydrogen Bonds, Yao Wu

LSU Doctoral Dissertations

The ability to explore and predict metastable structures of hybrid self-assemblies is of central importance for the next generation of advanced materials with novel properties. As compared to their thermodynamically stable forms, the kinetically stabilized materials show improved functionality potentially over their stable counterparts. The self-assembly processes usually originate from weak intermolecular interactions, involving a dynamic competition between attractive and repulsive interactions. These weak forces, including van der Waals (vdW), electrostatic interaction and the hydrogen bonding (H-bonding), can be tuned by external stimuli, e.g., confinement, temperature and ionization, and consequently driving hybrid materials into different configurations. It is challenging to …

Nmr Characterizations Of Candidate Battery Electrolytes, Stephen A. Munoz

Dissertations, Theses, and Capstone Projects

Enormous strides have been made in next-generation power sources to build a more sustainable society. Energy storage has become a limiting factor in our progress, and there are huge environmental and financial incentives to find the next step forward in battery technology. This work discusses NMR methods for characterizing materials for use in battery application, with a special focus on relaxometry and diffusometry. Examples are provided of various recent investigations involving novel candidate electrolyte materials with different collaborators. Works discussed in this thesis include: the characterization of a new disruptive solid polymer electrolyte technology, investigations of the dynamics of super …

Molecular Assembly Of Monolayer-Protected Gold Nanoparticles And Their Chemical, Thermal, And Ultrasonic Stabilities, Steven Ray Isaacs

Masters Theses & Specialist Projects

Gold monolayer-protected nanoclusters (MPCs) with average diameters of 1-5 nm protected by alkane- and arenethiolates were synthesized. Mixed-monolayer protected nanoparticles (MMPCs) were prepared by functionalizing hexanethiolate-protected MPCs with either 11-mercaptoundecanoic acid (MUA-MMPC), 11-mercaptoundecanol (MUO-MMPC), or 4-aminothiophenol (ATP-MMPC) using ligand place exchange. Presentation of various chemical reagents such as nucleophile, acid, or base and change in physical environment through ultrasonic and thermal irradiation resulted in changes to particles and their physical properties. Thermogravimetric analysis (TGA) was used to measure maximum temperature of the derivated thermogravimetric peaks (Tmax,DTG) as a means of comparing temperature dependence of mass loss. The absorption spectrum within …

Silver Nanoparticles As A Potential Solar Absorber, Benjamin Hardy

Honors Projects

This work reports the development of Silver nanoparticles implanted into a polymer as a solar absorber. The plasmonic nature of silver nanoparticle allows for adjustments to be made in its UV-VIS-NIR absorbance spectrum. A combination of different sized/shaped particles could result in ideal absorption of the majority of the solar spectrum. Allotting this with the stability of a polymer leads to potential solids or solutions that could work as a solar absorber. Tests were also performed to determine whether or not UV-C irradiation during synthesis effects the characteristics of silver nanoparticles, in particular the absorbance. Successful synthesis of silver nanoparticle …

Investigations Into Structure And Properties Of Atomically-Precise Transition Metal-Chalcogenide Clusters Of Crte And Ligated Cr6te8(Pet3)6, Anthony F. Pedicini

Theses and Dissertations

The complete understanding of a clusters electronic structure, the primary mechanisms for its properties and stabilization is necessary in order to functionalize them for use as building blocks within novel materials. First principle theoretical studies have been carried out upon the electronic properties of Cr_xTe_y (x = 1 – 6, y = 0 – 8, x + y ≤ 14), as well as for the larger triethylphosphine (PEt₃) ligated cluster system of Cr₆Te₈(PEt₃)₆. Together, we aim to use the information garnered from the smaller clusters to address …

Ultrafast Spectroscopy And Energy Transfer In An Organic/Inorganic Composite Of Zinc Oxide And Graphite Oxide, Jeff A. Secor

Dissertations, Theses, and Capstone Projects

The energy transfers and nature of defect levels of an organic/inorganic composite of Zinc Oxide and Graphite are studied with multidimensional spectroscopy. The edge and surface states of each composite are uncovered using excitation emission experiments showing which defect states are mediating the energy transfer from the metal oxide to the graphite oxide. Multidimensional time resolved spectroscopy further describes the effect of the carbon phase on the energy transfer pathways in the material.

Non-Conventional Approaches To Syntheses Of Ferromagnetic Nanomaterials, Dustin M. Clifford

Theses and Dissertations

The work of this dissertation is centered on two non-conventional synthetic approaches to ferromagnetic nanomaterials: high-throughput experimentation (HTE) (polyol process) and continuous flow (CF) synthesis (aqueous reduction and the polyol process). HTE was performed to investigate phase control between Fe_xCo_1-x and Co_3-xFe_xO_y. Exploration of synthesis limitations based on magnetic properties was achieved by reproducing M_s=210 emu/g. Morphological control of Fe_xCo_1-x alloy was achieved by formation of linear chains using an H_ext. The final study of the Fe_xCo_1-x chains used DoE to …

Calculating The Energy Barriers Required To Join Metal-Organic Framework Synthesis Intermediates With Non-Equilibrium Molecular Simulation, Marcus A. Tubbs, David Cantu, Roger Rousseau, Vassiliki-Alexandra Glezakou

STAR Program Research Presentations

Metal organic frameworks (MOFs) are synthetic materials made of a cage-like lattice of metal nodes connected by organic linkers. The pores between the nodes define the characteristics of the material. A MOF, MIL-101, has shown great capacity in the adsorption of carbon dioxide and methane, as well as in hydrogenation catalysis with palladium. While there has been success in synthesizing MIL-101 and other MOFs, the mechanistic details behind their assembly remain unknown. Understanding the synthesis mechanism is necessary to understand the kinetics involved and be able to produce this useful material on an industrial scale. Using MIL-101 as a prototypical …