Physics Commons^™

Maximum Trapping Focal Length In Photophoretic Trap For 3d Imaging Systems, Jason M. Childers

Electrical Engineering

This product is a photophoretic trapping system which allows varying focal lengths to test which focal lengths are possible for trapping toner particles. This system establishes that there exists a maximum trapping distance limitation and is the first time the effect of focal length is studied in a photophoretic trapping system. Increasing photophoretic trapping focal length is necessary for improving this technology as a 3D display. The 3D imaging technology is realized by dragging a microscopic (micrometer-scale) particles with a laser beam to trace an image. This technology can display fully colored and high-resolution 3D images visible from almost any …

Developing A Data Acquisition System For Use In Cold Neutral Atom Traps, Jonathan E. Fuzaro Alencar

Physics

The rising interest in quantum computing has led to new quantum systems being developed and researched. Among these are trapped neutral atoms which have several desirable features and may be configured and operated on using lasers in an optical lattice. This work describes the development of a new data acquisition system for use in tuning lasers near the precise hyperfine transition frequencies of Rb 87 atoms, a crucial step in the functionality of a neutral atom trap. This improves on previous implementations that were deprecated and limited in laser frequency sweep range. Integration into the experiment was accomplished using an …

Numerical Methods For Optimal Transport And Optimal Information Transport On The Sphere, Axel G. R. Turnquist

Dissertations

The primary contribution of this dissertation is in developing and analyzing efficient, provably convergent numerical schemes for solving fully nonlinear elliptic partial differential equation arising from Optimal Transport on the sphere, and then applying and adapting the methods to two specific engineering applications: the reflector antenna problem and the moving mesh methods problem. For these types of nonlinear partial differential equations, many numerical studies have been done in recent years, the vast majority in subsets of Euclidean space. In this dissertation, the first major goal is to develop convergent schemes for the sphere. However, another goal of this dissertation is …

Enhanced Study Of Complex Systems By Unveiling Hidden Symmetries With Dynamical Visibility, Nhat Vu Minh Nguyen

2022 Symposium

One of the great challenges in complex and chaotic dynamics is to reveal its deterministic structures. These temporal dynamical structures are sometimes a consequence of hidden symmetries. Detecting and understanding them can allow the study of complex systems even without knowing the full underlying mathematical description of the system. Here we introduce a new technique, called Dynamical Visibility, that quantifies temporal correlations of the dynamics based upon some symmetry conditions. This visibility measures the departure of the dynamics from internal symmetries. We apply this technique to well-known chaotic systems, such as the logistic map and the circle map, as well …

Normative Data On The Foveal Avascular Zone In A Young Healthy Irish Population Using Optical Coherence Tomography Angiography, Susan M. O'Shea, Veronica O'Dwyer, Grainne Scanlon

Articles

Purpose: To establish normative data on the size, shape and vascular profile of the foveal avascular zone (FAZ) in a young, healthy, Irish population, using the Cirrus 5000 HD-OCT. Certain diseases may alter FAZ appearance. Normative databases provide normal baseline values for comparison, thus improving diagnostic ability.

Methods: One hundred and fifty-four subjects aged 18–35 years old were recruited. Superficial FAZ area, diameter, circularity, ganglion cell layer, central macular thickness (CMT), vascular perfusion and density were measured using the Cirrus 5000. Axial length was measured with the IOL Master and blood pressure was measured using the Omron sphygmomanometer. …

The Aquatic Particle Number Quandry, Alexander B. Bochdansky, Huanqing Huang, Maureen H. Conte

OES Faculty Publications

Optical surveys of aquatic particles and their particle size spectra have become important tools in studies of light propagation in water, classification of water masses, and the dynamics of trophic interactions affecting particle aggregation and flux. Here, we demonstrate that typical settings used in image analysis vastly underestimate particle numbers due to the particle – gel continuum. Applying a wide range of threshold values to change the sensitivity of our detection system, we show that macrogels cannot be separated from more dense particles, and that a true particle number per volume cannot be ascertained; only relative numbers in relation to …

Artificial Intelligence And Machine Learning In Optical Information Processing: Introduction To The Feature Issue, Khan Iftekharuddin, Chrysanthe Preza, Abdul Ahad S. Awwal, Michael E. Zelinski

Electrical & Computer Engineering Faculty Publications

This special feature issue covers the intersection of topical areas in artificial intelligence (AI)/machine learning (ML) and optics. The papers broadly span the current state-of-the-art advances in areas including image recognition, signal and image processing, machine inspection/vision and automotive as well as areas of traditional optical sensing, interferometry and imaging.

Fabricating Nanophotonic Devices Using Nanofabrication Techniques, Scott Cummings

Student Scholar Symposium Abstracts and Posters

Nanofabrication processes are widely used to make the integrated circuits and computer chips that are ubiquitous in today’s technology. These fabrication processes can also be applied to the creation of nanophotonic devices. The ways in which we apply these fabrication techniques in the field of photonics is often constrained by the technologies used for electronics manufacturing which presents an interesting engineering challenge. These limitations include availability and cost of certain fabrication equipment and techniques required to create state-of-the-art nanophotonic devices. Through work with the University of California Irvine nano-fabrication cleanroom, we designed and fabricated various integrated photonic components including grating …

Advancement In Infrared Optics Through The Exploration Of Solution Derived Arsenic Selenide (As2se3) Thin Films, Annabella Orsini

Physics and Astronomy Summer Fellows

There are great opportunities for advancement in the realm of infrared (IR) optics through the use of chalcogenide glasses (ChGs). The development of IR optics using ChGs is important for applications in search and rescue operations, firefighting efforts, medical imaging, and satellites. Instead of creating bulky, expensive, single crystal IR glasses, ChGs can be deposited as thin films by solution derived (SD) spin or dip coating. Our research takes a multidisciplinary approach to investigate ChGs thin films using physics, chemistry, optics, and materials science.

Study Of The Effects Of Cavity Mode Spacing On Mode-Hopping In Iii–V/Si Hybrid Photonic Crystal Lasers, Praveen K.J. Singaravelu, Sharon M. Butler, Robert N. Sheehan, Alexandros A. Liles, Stephen P. Hegarty, Liam O'Faolain

Cappa Publications

We present a design methodology for hybrid lasers to realise mode-hop free operation by controlling the cavity mode spacing. In this study, a compact hybrid photonic crystal laser (H-PhCL) was employed which allowed a reduction of the Fabry–Perot length of the laser cavity and eliminated the need for an active mode stabilisation mechanism in order to realise mode-hop free operation. The H-PhCL was formed by butt-coupling a reflective semiconductor optical amplifier (RSOA) with a two-dimensional silicon (Si) photonic crystal (PhC) cavity. Continuous stable single frequency operation with >40 dB side-mode suppression ratio (SMSR) of the laser was achieved for gain …

Thermal Metasurfaces: Complete Emission Control By Combining Local And Nonlocal Light-Matter Interactions, Adam C. Overvig, Sander A. Mann, Andrea Alù

Advanced Science Research Center

Metasurfaces have been enabling the miniaturization and integration of complex optical functionalities within an ultrathin platform by engineering the scattering features of localized modes. However, these efforts have mostly been limited to the manipulation of externally produced coherent light, e.g., from a laser. In parallel, the past two decades have seen the development of structured surfaces that emit partially coherent radiation via thermally populated, spatially extended (nonlocal) modes. However, the control over thermally emitted light is severely limited compared to optical metasurfaces, and even basic functionalities such as unidirectional emission to an arbitrary angle and polarization remain elusive. Here, we …

Investigating The Use Of Ultraviolet Light Emitting Diodes (Uv-Leds) For The Inactivation Of Bacteria In Powdered Food Ingredients, Laura Nyhan, Milosz Przyjalgowski, Liam O'Faolain, Máire Begley, Michael Callanan

Cappa Publications

The addition of contaminated powdered spices and seasonings to finished products which do not undergo further processing represents a significant concern for food manufacturers. To reduce the incidence of bacterial contamination, seasoning ingredients should be subjected to a decontamination process. Ultraviolet light emitting diodes (UV-LEDs) have been suggested as an alternative to UV lamps for reducing the microbial load of foods, due to their increasing efficiency, robustness and decreasing cost. In this study, we investigated the efficacy of UV-LED devices for the inactivation of four bacteria (Listeria monocytogenes, Escherichia coli, Bacillus subtilis and Salmonella Typhimurium) on a plastic surface and …

Optomechanical Quantum Entanglement, Kahlil Y. Dixon

LSU Doctoral Dissertations

As classical technology approaches its limits, exploration of quantum technologies is critical. Quantum optics will be the basis of various cutting-edge research and applications in quantum technology. In particular, quantum optics quite efficacious when applied to quantum networks and the quantum internet. Quantum Optomechanics, a subfield of quantum optics, contains some novel methods for entanglement generation. These entanglement production methods exploit the noise re-encoding process, which is most often associated with creating unwanted phase noise in optical circuits. Using the adapted two-photon formalism and experimental results, we simulate (in an experimentally viable parameter space) optomechanical entanglement generation experiments. These simulations …

Fluorescence Spectroscopy For The Determination Of Reconstitution Time Of An In-Vial Lyophilised Product, Khaled Elkassas, Krishnakumar Chullipalliyalil, Michael Mcauliffe, Sonja Vucen, Abina Crean

Cappa Publications

Lyophilisation is a prominent technique used to create stabilised, dried forms of biopharmaceutical formulations. Reconstitution of lyophilised parenteral formulations is a key step prior to patient administration. The accurate determination of reconstitution time is a necessity to aid formulation development and support product quality control. Traditional methods for quantifying reconstitution time involve the visual identification of the endpoint, which has led to variable values reported across studies. In this work, the use of ultra-violet (UV) excited fluorescence spectroscopy as an alternative to the visual quantification of the reconstitution time was investigated. Spectrographic information was collected via a bespoke setup that …

Optical Study Of 2-D Detonation Wave Stability, Eulaine T. Grodner

Theses and Dissertations

Fundamental optical detonation study of detonations constricted to a 2-d plane propagation, and detonations propagating around a curve. All images were processed using modern image processing techniques. The optical techniques used were shadowgraph, Schlieren, and chemiluminescence. In the 2-Dstraight channels, it was determined wave stability was a factor of cell size. It was also determined the detonation wave thickness (area between the combustion and shockwave) was a factor of how much heat available for the detonation. For the detonations propagating around a curve, it was determined the three main classifications of wave stability were stable, unstable, and detonation wave restart. …

The Aging And Impacts Of Atmospheric Soot: Closing The Gap Between Experiments And Models, Ogochukwu Yvonne Enekwizu

Dissertations

The main goal of this dissertation is to generate data and parameterizations to accurately represent soot aerosols in atmospheric models. Soot from incomplete combustion of fossil fuels and biomass burning is a major air pollutant and a significant contributor to climate warming. The environmental impacts of soot are strongly dependent on the particle morphology and mixing state, which evolve continuously during atmospheric transport via a process known as aging. To make predictions of soot impacts on the environment, most atmospheric models adopt simplifications of particle structure and mixing state, which lead to substantial uncertainties. Using an experimentally constrained modeling approach, …

Integrated Photonic Device, Brittney Kuhn

Student Scholar Symposium Abstracts and Posters

In computer mediated communication networks, information is typically encoded optically to transmit signals over long distances. At a network node, the optical signal is transformed into the electrical domain, processed electronically, and transformed back to an optical state to reach its destination. Transitioning between optical and electrical encoding of the signal is a potential security weak point, especially for quantum communication links. If information can remain in one state as it travels through the network, then security breaches can be detected and dealt with more easily. Furthermore, keeping the information in one state can reduce power consumption in the network. …

Construction Of A Hyperspectral Imager Using 3d-Printed And Off-The-Shelf Components, Joshua Moorhouse

Mechanical Engineering Undergraduate Honors Theses

The Arkansas Center for Space and Planetary Sciences is working in collaboration with the Mechanical Engineering department to create a relatively cheap and modifiable hyperspectral imager. It is constructed using 3D-printed and off-the-shelf components from Edmund Optics and Amazon. The iteration created in this paper delivers spectrograms in the visible spectrum. The long-term goals of the camera are to create hyperspectral images from these spectrograms and to advance the imager into the infrared and near-infrared spectra. This imager is being developed to be used in the Arkansas Center for Space and Planetary Sciences environmental test chambers to further the scientific …

An Overview Of Lasers And Their Applications, Luis Cristian Giovanni Guerrero

Physics

This paper is an overview of lasers and their applications. The fundamentals of laser operation are covered as well as the various applications of advanced laser systems. The primary focus is to highlight some of the technological advancements made possible by lasers in the last half-century.

Novel Photon-Detector Models For Enhanced Quantum Information Processing, Elisha Siddiqui

LSU Doctoral Dissertations

This work is devoted to the development of novel photon-detector models at room temperature using quantum optics elements. This work comprises of two photon-number-resolving detector (PNRD) models, and the application of PNRD in LIDAR. The first model is based on using a two-mode squeezing device to resolve photon number at room temperature. In this model we study the average intensity-intensity correlations signal at the output of a two-mode squeezing device with |N> and |α> as the two input modes. We show that the input photon-number can be resolved from the average intensity-intensity correlations. In particular, we show jumps in the …

The Design Of A Continuous Wave Molecular Nitrogen Stimulated Raman Laser In The Visible Spectrum, Timothy J. Bate

Theses and Dissertations

Hollow-core photonic crystal fibers (HCPCFs) shows promise as a hybrid laser with higher nonlinear process limits and small beam size over long gain lengths. This work focuses on the design of a CW molecular nitrogen (N₂) stimulated Raman laser. N₂ offers Raman gains scaling up to 900 amg, scaling higher than H₂. The cavity experiment showed the need to include Rayleigh scattering in the high pressure required for N₂ Raman lasing. Even at relatively low pressure ssuch as 1,500 psi, high conversion percentages should be found if the fiber length is chosen based on …

Mult-Spectral Imaging Of Vegetation With A Diffractive Plenoptic Camera, Tristan R. Naranjo

Theses and Dissertations

Snapshot multi-spectral sensors allow for object detection based on its spectrum for remote sensing applications in air or space. By making these types of sensors more compact and lightweight, it allows drones to dwell longer on targets or the reduction of transport costs for satellites. To address this need, I designed and built a diffractive plenoptic camera (DPC) which utilized a Fresnel zone plate and a light field camera in order to detect vegetation via a normalized difference vegetation index (NDVI). This thesis derives design equations by relating DPC system parameters to its expected performance and evaluates its multi-spectral performance. …

Structuring Light For Investigating Optical Vortices, Andrew Voitiv, Mark Siemens

DU Undergraduate Research Journal Archive

Vortices are well known in our world: tornadoes, hurricanes, and quickly stirred iced tea all demonstrate the vortex phenomenon. In addition to these classical fluids, vortices exist in laser light. While classical fluid vortex dynamics is one of the oldest studied physics problems, the study of optical vortices is only a few decades old. Paralleling the community’s curiosity of quantized vortices in quantum fluids, such as super fluid helium and Bose-Einstein condensate, there is immense interest in the study of optical vortices. In this article, we cover the basic theory of structuring light to generate optical vortices and then discuss …

Optimization Of Collection Optics For Maximum Fidelity In Entangled Photon Sources, Kadi̇r Durak

Turkish Journal of Physics

In this report,decoherence sources for entangled photons created by spontaneous parametricdown-conversion phenomenon are studied. The phase and spatial distinguishability of photon pairs from orthogonal crystals reduce the maximum achievable entanglement fidelity. Carefully chosen compensation crystals are used to erase the phase and spatial traces of down-conversion origins. Emission angle of photon pairs also leads to optical path difference and results in phase distinguishability. A realistic scenario is numerically modelled, where the photon pairs with nonzero emission angle gather a phase difference. These pairs can still be collected and manipulated for practical use but the collection optics adds upon the phase …

Special Section Guest Editorial: Machine Learning In Optics, Jonathan Howe, Travis Axtell, Khan Iftekharuddin

Electrical & Computer Engineering Faculty Publications

This guest editorial summarizes the Special Section on Machine Learning in Optics.

Electromagnetic Analysis Of Bidirectional Reflectance From Roughened Surfaces And Applications To Surface Shape Recovery, Julian Antolin Camarena

Physics & Astronomy ETDs

Scattering from randomly rough surfaces is a well-established sub area of electrodynamics. There remains much to be done since each surface and optical processes that may occur in within the scattering medium, and countless other scenarios, is different. There are also illumination models that describe lighting in a scene on the macroscopic scale where geometrical optics can be considered adequate. Of particular interest for us is the intersection of the physical scattering theories and the illumination models. We present two contributions: 1) A minimum of two independent images are needed since any opaque surface can be uniquely specified in terms …

A Rotating Aperture Mask For Small Telescopes, Edward L. Foley

Master's Theses

Observing the dynamic interaction between stars and their close stellar neighbors is key to establishing the stars’ orbits, masses, and other properties. Our ability to visually discriminate nearby stars is limited by the power of our telescopes, posing a challenge to astronomers at small observatories that contribute to binary star surveys. Masks placed at the telescope aperture promise to augment the resolving power of telescopes of all sizes, but many of these masks must be manually and repetitively reoriented about the optical axis to achieve their full benefits. This paper introduces a design concept for a mask rotation mechanism that …

Measuring Length Of Electron Bunches With Optics In Lcls-Ii, Nathan Ahn, Alan Fisher

STAR Program Research Presentations

Since the launch of the LINAC Coherent Light Source (LCLS) in 2009, there have been over 1,000 publications enabling pioneering research across multiple fields. Advances include: harnessing the sun’s light, revealing life’s secrets and aiding drug development, developing future electronics, designing new materials and exploring fusion, customizing chemical reactions, and many more. These discoveries gathered worldwide attention, and now work has begun on a new revolutionary tool, LCLS-II. The LCLS-II will pulse at a million times a second, compared to the 120 pulses from the LCLS. Within the LCLS-II, there are two chicanes, serpentine curves. As the electron beam passes …

Studying Near-Critical And Super-Critical Fluids In Reduced Gravity, Christian Hawkins, Ana Oprisan, Carole Lecoutre-Chabot, Yves Garrabos, Daniel Beysens

Journal of the South Carolina Academy of Science

Critical and supercritical fluids have a variety of applications, from use as machine lubricants in high pressure or high temperature environments to the manufacturing of materials such as aerogel. The optical properties of fluids undergo rapid changes near the critical point resulting in a rapid increase in turbidity known as critical opalescence. These optical changes can be used to probe the universality of critical behavior. As a fluid approaches the critical point, the compressibility rapidly increases. In a gravitational field, this increase in compressibility leads to near-critical fluids stratifying by phase and density, making it difficult to observe the optical …

Tailored Frequency Comb Structures And Their Sensing Applications, James Hendrie

Optical Science and Engineering ETDs

The focus of this dissertation is the development and investigation of nested cavity mode-locked lasers and their resultant tailored frequency combs. A nested cavity is made up of two cavities, known as parents. One parent is a larger, active, 100MHz Ti:Saph oscillator and the other is a smaller, passive, 7GHz Fabry-Perot Etalon (FPE). Unlike standard frequency combs that are continuous, a tailored comb’s teeth are distributed in equally spaced groups where the center of each group corresponds to the resonance of the FPE and the side bands are determined by the resonances of the Ti:Saph. This unique coupling of the …