Physics Commons^™

Recovering Lost Exposure From The Majorana Demonstrator And Testing Data Selection Assumptions, Thomas Lannen

Theses and Dissertations

The Majorana Demonstrator recently concluded its search for neutrinoless double beta decay using an array of up to 40.4kg of germanium detectors, 27kg of which were enriched in ⁷⁶Ge and housed inside a copper and lead compact shield located at the 4850 foot level in a clean room in the Davis Campus of the Sanford Underground Research Facility (SURF) in Lead, South Dakota. This search proceeded from June 26, 2015 until March 3, 2021 and 64.5 kg yr of enriched active exposure was acquired while achieving a world leading energy resolution of 0.12% FWHM at 2039 keV, one of …

Application Of Photoacoustic Imaging For Pneumonia Detection, Caesarany Maqfiroh, Rini Widyaningrum, Ahmad Mujtahid Anas, Mitrayana Mitrayana

Makara Journal of Science

We used photoacoustic imaging (PAI) to visualize and compare acoustic intensity levels in pneumonia-affected and healthy chicken lungs. After histological confirmation of pneumonia, the samples were scanned and subjected to a 532-nm diode laser in a photoacoustic imaging system. The acoustic intensity level of pneumonia-affected tissue was examined and compared with that of healthy lung samples. The optimum laser frequency and duty cycle for imaging the samples were 17 kHz and 30%, respectively. The acoustic intensity levels of pneumonia-affected tissue and healthy lungs were −82.5 ± 1.8 dB and −79.9 ± 1.3 dB, respectively. We found that a simple PAI …

Uhv-Shear-Force Acoustic Near-Field Microscopy And Its Implementation In The Study Of Confined Mesoscopic Fluids, Theodore Alex Brockman

Dissertations and Theses

The design, construction, and implementation of Shear-force Acoustic Near-Field Microscopy (SANM), operational from ultrahigh vacuum (UHV) to ambient conditions--offering a pristine environment for more reliable characterization the hydrophobic/hydrophilic wetting properties of surfaces--is presented. SANM capitalizes on its sensitivity to the evanescent near-field acoustic emissions from a mesoscopic fluid (confined between the apex of a laterally oscillating tapered nanosized probe and a flat substrate) when subjected to shear motion. This distinct capability provides direct access to the fluid’s viscoelastic response when subjected to shear interactions, in contrast to indirect measurements performed by other standard probe proximity scanning techniques. The entire …

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Bbt Side Mold Assy, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set covers the design and fabrication information of the ETSU Guitar Building Project’s BBT (OM-sized) Side Mold Assy for use with the STEM Guitar Project’s standard acoustic guitar kit. The extended 'as built' data set contains an overview file and companion video, the 'parent' CADD drawing, CADD data for laser etching and cutting a drill &/or layout template, CADD drawings in AutoCAD .DWG and .DXF R12 formats of the centerline tool paths for creating the mold assembly pieces on an AXYZ CNC router, and support documentation for CAM applications including router bit specifications, feeds, speed, multi-pass …

Heel Down And Toe-Off Time Measured With Ultrasonic Doppler System And Force Plate Sensor, Sabin Timsina

Honors Theses

Collie Box is a medical device that measures the gait parameters of the person walk- ing in front of it. This device uses the Ultrasonic Doppler system to extract the heel-contact and toe-off times of a person walking within the range of 2-10 meters. These times are used to determine the leg’s swing phase and double stance times. The ultrasonic transducer of 10mm diameter is driven at 40kHz. At the time of the heel-contact and toe-off, foot velocity is zero while the torso part of the human body is still in motion. The wide directivity of 10mm diameter ultrasonic transducer …

Group Velocity Of Acoustic Waves In Plates Of Electronic Materials, Saminda Adikaram

Electronic Theses and Dissertations

In this study the propagation and dispersion characteristics of plate acoustic waves (PAW) in electronic materials are investigated experimentally. Plate acoustic waves are elastic waves that travel along a plate with thickness comparable to the wavelength of the waves. Lamb waves, a type of plate acoustic wave, have particle motion in the direction of propagation and normal to the plate. Unlike an infinite medium, plates support two sets of Lamb wave modes (symmetric and anti-symmetric) with unique velocities which depend on the relationship between the wavelength and the thickness of the plate. Out of this, two zero order modes (so …

Error Sensor Strategies For Active Noise Control And Active Acoustic Equalization In A Free Field, Ryan T. Chester

Theses and Dissertations

Several measurements may be used as error signals to determine how to appropriately control a sound field. These include pressure, particle velocity, energy density and intensity. In this thesis, numerical models are used to show which signals perform best in is free-field active noise control (ANC) using error sensors located in the near field of the sound sources. The second is equalization in a free field and a semi-free field. Minimized energy density total power output (MEDToPO) plots are developed; these indicate the maximum achievable attenuation for a chosen error sensor as a function of location. A global listening area …

On The Acoustic Of Moving Bodies, Pal R. Molnar

Pal R. Molnar

No abstract provided.

Development And Comparison Of Highly Directional Loudspeakers, Gordon Robert Dix

Theses and Dissertations

Highly directive loudspeakers have long been important tools for sound system designers, experimental acousticians, and many other professionals in the audio industry. They allow sound engineers to more easily manipulate the radiation pattern of their loudspeakers to accommodate the purpose of the venue. Many commercially available products, while exhibiting good directivity at mid and high frequencies, generally lack control in the low frequency range. A new method for controlling the radiation pattern of a loudspeaker at low frequencies has been developed and modeled extensively. Prototypes have been built and tested in an anechoic chamber. Results from computer modeling and experimental …

Acoustics Of The Salt Lake Tabernacle: Characterization And Study Of Spatial Variation, Sarah Rollins

Theses and Dissertations

In order to preserve the acoustics of the Salt Lake Tabernacle after the seismic renovation of 2005-2006, it was necessary to characterize these acoustics immediately preceding the renovation. This thesis discusses the characterization process that began with the measurement of hundreds of impulse responses for five different source positions and several receiver locations throughout the hall seating areas. The acoustics were further characterized by deriving various parameters from these responses that correlate with subjective preferences for music and speech. Impulse responses were also generated by a CATT-Acoustic™ computer model of the Tabernacle for the same purpose. The parameter values were …

Geometric Acoustic Modeling Of The Lds Conference Center, Heather Smith

Theses and Dissertations

This thesis discusses the process of modeling a 21,000 seat fan-shaped auditorium using methods of geometric acoustics. Two commercial geometric acoustics software packages were used in the research: CATT-Acoustic™ 8.0 and EASE™ 4.1. The process first included creating preliminary models of the hall using published absorption coefficients for its surfaces and approximate scattering coefficients based on current best-known techniques. A detailed analysis determined the minimum numbers of rays needed in both packages to produce reliable results with these coefficient values. It was found that 100,000 rays were needed for CATT™ and 500,000 rays were needed for EASE™. Analysis was also …

Analysis And Comparison Of Three Acoustic Energy Density Probes, Lance Lester Locey

Theses and Dissertations

Traditional methods for the investigation of sound fields generally rely on a microphone to convert sound pressure into an electrical signal which can be recorded, displayed, and so forth. The squared sound pressure is directly related to potential energy density. Consequently, the measurement of sound pressure alone does not inherently provide insight into the total energy density of the sound field. Specifically, no information about the kinetic energy density of the sound field is available from this measurement alone. However, it is possible to use two microphones to estimate particle velocity. The squared particle velocity magnitude is directly related to …

Derivation Of Moving-Coil Loudspeaker Parameters Using Plane Wave Tube Techniques, Brian Eric Anderson

Theses and Dissertations

Small-signal moving-coil loudspeaker driver parameters are traditionally derived through electrical impedance measurement techniques. These parameters are commonly called Thiele/Small parameters, after Neville Thiele and Richard Small who are credited with developing industry-standard loudspeaker modeling techniques. However, because loudspeaker drivers are electro-mechano-acoustical transducers, it should be possible to measure their parameters in physical domains other than the electrical domain. A method of measuring loudspeaker parameters from the acoustical domain will be developed. The technique uses a plane wave tube to measure acoustical properties of a baffled driver under test. Quantities such as the transmission loss through the driver are measured for …